Y

Pr

Your on

rojec

ne-stopMain

salww

www

Pric

2

ct Sal

p sourcntenan

es@proww.projew.turbin

cePa

2012

les C

ce for ace Co

ojectsaleectsalesemro.bl

ages

2

Corpo

all Spensuma

escorp.cscorp.coogspot.c

oratio

ecialty ables

com om com

on

Turbin

 

ne

 

Project

We areGasketdistribucompre

OriginaTurbineDrivelin

Power APGENSEPCO

With oand by

All logos and t

t Sales Co

e Importerting brandutors for lessor man

al equipmees, Ebarane, Renk B

stations inNCO, OPGO, etc.

ne of the my service pr

 trademarks are registe

rp - Introdu

rs, Marketeds like Mlubrication ufacturers

ent manufa, SiemenBearings, K

ncluding LaGC, Essar

most exharoviders, w

ered trademarks of th

uction 

ers and Inarston, Bi

brand Mand count

facturers ls Maneja

Kirloskar, B

anco, TataPower, JS

ustive rangwe are a on

heir respective owners 

dia Distribirkosit, Ar

Molykote ut among ou

like Bharaa, MAN TBombardie

a Power, TSW, Tata S

ge of specne-stop sou

 

butors for aexons, Qused in pour custome

at Heavy Turbo, Mar, Dresser

Torrent, SuSteel Captiv

cialty produurce for ma

a host of huikSteel, eower statioers:

Electricalsruti UdyogRand, GE

rat Ligniteve, Nalco C

ucts used aintenance

high perfoetc and rons, turbin

s Limited, g, Alstom

E Oil and G

e, NTPCs, CPP, GVK

in power se consuma

rmance regional ne and

Triveni m, GKN Gas, etc

NPCIL, K, GMR,

stations ables. 

 

MRO Product Range

A. Turbine Sealing Compounds

a. Birkosit Dichtungskitt Flange Sealants b. Marston Oil Joint Sealants c. LACO Thread Sealants d. Dow Corning Duct and Seam Sealants

B. Specialty Products

a. Prussian Blue b. Peak Polish c. QuikSteel Epoxy d. Damaged Thread Repairs e. Project Sales Leak Sealing Kit f. NDT Products

C. Anti-seize Compounds

a. Molykote Metal free ultra-pure pastes b. Molykote Uniform torque-tension thread pastes c. General Purpose anti-seize pastes

D. Maintenance Lubricants/ Sprays

a. Multi-functional sprays b. Adhesive Sprays c. Cleaners and Degreasers d. Lubricating greases in Aerosols e. Valve and ‘O’ ring lubrication f. Wire Rope Lubrication g. Conductive Lubricants

E. Other Power Plant Maintenance Products

a. Insulation Coatings for switchyard equipments b. Reliability improvement products

 

 

Aresons Motorsil D (High Temp. Oil Resistant Sealant) A Nuovo Pignone Recommended Product When you have a gasketing application that requires (a) thickness (b) oil resistance (c) high temperature resistance, you choose Arexons Motorsil D. 60 gms tube from Arexons SpA, Italy.

QUIKSTEEL EPOXY STICK An easy to use high temperature epoxy stick sealant for online sealing of leaks in petrol, diesel, solvents, alkalis tanks and transformers. Cures in 60 minutes and has a temperature resistance of 260 deg C, shear strength of 740 psi, Tensile strength of 6200 psi and shore hardness of D-87. 113.6 grams stick, Rs.399 Ea

Birkosit Dichtungskitt (Temp Resistance 900 deg C and pressure resistance 250 bar, Developed in co-operation with Siemens) For any sealing application in turbines, compressors, engines, generators, expanders, flanges, etc where the highest temperature and pressure resistance is required. Approved by BHEL, Siemens, Triveni, MAN Turbo, Ebara and most OEs, Birkosit gives a service life of 10 years, has a shelf life of 5 years, contains linseed oil for better sealing properties, and is available in imported 1 kg packs from Germany.

Marston Red High Temperature Gasket & Jointing Compound from Marston Domsel

A unique non-hardening gasketing compound for sealing metal-to-metal joints in the presence of oils. Used for pedestal bearings flanges in turbines, gear box casings, pumps, motors, and various finely machined flange sealing applications. Rs.199 Ea Refractory Boiler Putty FROSCHMARKE

Froschmarke refractory boiler putty is a potassium water glass-based sealing putty. Froschmarke refractory boiler putty is guaranteed to be resistant to open flames and temperatures of up to above +1000 °C. Has good adhesion, is non-shrinking, completely seals off smoke and gas. For boilers, furnaces and stoves.

©TM All brands, images and registered trademarks are the property of their respective owners. Users are requested to check the suitability of the product to their application. For further details, please feel free to write to us at satish@projectsalescorp.com or log onto www.projectsalescorp.com or respective brand web site sites.

Marketed by Project Sales Corp, Visakhapatnam. Email us at sales@projectsalescorp.com

Laco Pipe Thread Sealant, Pipetite Use on metal threads for sealing steam, water, air, natural gas, LPG. 1-1/4 oz stick. Temp resistance 177 deg, Pressure 136 bar for liquids, 24 bar for gas. Plasto-joint for Plastic fittings Slic-tite® Paste with PTFE

Non-toxic, non-drying formula will not harden or crack in the pipe joint. Provides easy disassembly and break out. Seals to high pressures: 10,000 PSI for Liquids, 3,000 PSI for Gases. Sealing temperature range: -50˚ to 500˚F (-46˚C to 260˚C). Recommended Services: water, natural gas, LP gases, steam, air, gasoline, kerosene, Refrigerants, ammonia, caustics, and acids. ¼ pint and ½ pint packs. 236 ml Rs.750 Ea

Marston High Temperature RTV Sealant Hylosil RTV Silicone Sealant from Germany, 80 ml tubes for form-in-place gasketing at high temperatures upto 300 deg C.

Hylo/MD Surface Cleaner Spray A surface cleaner spray from Marston Domsel to be used prior to all sealing and bonding application to clean surfaces for better bonding. Helps improve adhesion when sealing materials applied to clean surfaces. Very fast evaporating, cleaner/degreaser removes dust, dirt, oil, grease, etc from components. Available in 400 ml spray, 125 ml bottles. Imported from Marston-Domsel Germany. Rs.250 Ea

PTFE Cord 3/32” x 50’ PTFE cord used as packing for valves, pumps, flanges as a gasket material. Resistant to all chemicals, solvents, fuels and acids, and temperature resistant to 260 deg C, this non-flammable, non-hazardous PTFE cord replaces all other sealants and tape on threads. Imported from LACO, USA. Rs.1250 Ea

Also available from Project Sales Corp, a complete range of anaerobic adhesives and sealants, weather-sealing sealants, fire retardant expanding foam sealants, clean-room sealant, Pipe Jointing Compounds, 3M/Marston Domsel Polyurethane sealants, MS Polymer Sealants, Thread Pastes, ASV Aerosols, etc that makes us a one-stop source for all your sealing needs. Explore your options with us !

• Gasketing Compounds • Jointing Compounds • Flange Sealants • Thread Sealants • Pipe Sealants • Form-in-place RTVs • Turbine Flange Sealing

Compounds

 

All leadthe equsealing

Temp Ryears

 

ding turbineuipment mo

g compound

Resistance 90 I Better Ga

e makers inore reliable. d worldwide

00C I Pressap Filling Prop

India and E Developed , since 1952

Unique Ad

sure Resistaperties I Eas

halogens th

Europe rely in close co2, develope

dvantages

nce 250 bar sy Spreadabhat can caus

on Birkosit®o-operationsed specifica

of Birkosit

I Service Lility I Safe,

se corrosion

® Sealing Cs with Siemelly for steam

t

Life of 10 yeaNon-flammab

Compound tens, this is tm and gas tu

ars I StoragIble No su

 

to make the only urbines.

ge Life 5 lphur or

Steam and Gas Turbines Flanges Compressors Flanges

Expanders Flanges Split Casing Pumps

Avoid leakages in all of your critical high temperature and high pressure flange joints

Hot Blast Valves

High Pressure Valve Joints Steam Generator Fittings Pipeline Flange Gaskets

Bringing reliability to sealing high temperature high pressure flanges, since 1952

Marketed in India by Project Sales Corporation, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, Andhra Pradesh. Call +91-891-2564393, Fax +91-891-2590482, sales@projectsalescorp.com

http://india.birkosit.com. A product of A.I. Schulze Chemotechnische Fabrik e.K, Görlitz, Germany

Project Sales Corporation

28 Founta Plaza, Suryabagh, Visakhapatnam 530 020, AP India. Phone: + 91 891 2564393; 6666482 Fax +91 891 2590482. sales@projectsalescorp.com; www.projectsalescorp.com

Sole Importers and Marketers http://india.birkosit.com

BIRKOSIT Dichtungskitt ® is a single-component, paste luting agent/sealing material for industrial use wherever conditions of temperature combined with pressure on smooth, plane sealing surfaces (butt joints) make extreme demands on the quality of the sealing compound. This applies, in particular, to the sealing of

metallic joints in: steam and gas turbines, compressors, generators, expanders, pumps, flange joints, etc. Five good reasons why you need to chose Birkosit for you sealing needs: 1. Temperature resistance BIRKOSIT Dichtungskitt ® withstands hot steam and air, hot and cold water, light fuel oils and lubricants, as well as crude oil and natural gas at temperatures of up to 900 °C. 2. Pressure Resistance The adhesion on sealing surfaces and butt joints is so high that a one hundred percent seal is guaranteed even for pressures up to 250 bar. The pressure resistance for flanges without sealing rings is guaranteed up to 450 bar, and even up to 550 bar for screw joints. 3. Service life When used in accordance with instructions and with regular servicing as required for steam and gas turbines, we guarantee a service life of 10 years for use on machined sealing surfaces (butt joints) with a finishing accuracy of Ra = 0.8 μm to 1.2 μm. For high-pressure turbines (H), medium-pressure turbines (M) and low-pressure turbines (L) we guarantee that the product will withstand hot steam and hot air, hot and cold water, light fuel oils and lubricants as well as crude oil and natural gas up to 900°C and withstand pressure up to 250 bar. 4. Storage Life If stored correctly, we guarantee a service life of the product in the tin of 5 years. Opened tins - If the tins are resealed correctly after partial use, we guarantee a service life of the product of 3 years. 5. Spreadability Birkosit can be easily applied on the flange surface with a putty blade (you will get them free with the shipment you receive from Project Sales Corp) and as it contains linseed oil instead of solvents, it spreads easily on the flange surfaces.

Marston is a unique non-hardening sealing compound used extensively for sealing metal-to-metal joints at high temperatures, in the presence of oils, fuels , lubricants and gases.

The Product The product is a permanently plastic, very adhesive sealing compound based on polyurethane. Due to its excellent thermal, mechanical and chemical resistance, the sealing compound is especially suited for highly stressed joints. The material can handle temperatures upto 270 deg C and upto + 300 deg C for short time. Marston is resistant against mineral oils and synthetic oils, fuels, additives, gases, water, anti-freeze, etc. Several unique advantages: 1. Higher temperature

resistance at 270 deg C 2. Unlimited shelf life 3. Contains safer acetone as

solvent 4. Corrosion free – no adverse

effect on metals 5. Better adhesion than other

sealing compounds

Technical Advantages High Temperature Range of 270-300 deg C compared to others for gasketing applications. Excellent thermal, mechanical and chemical resistance. Completely resistant to oil, fuels, gases, water, air, anti-freeze and many others. Non-hardening – hence handles vibrations and lateral movements better. Seals all asperities in metal-to-metal joints with one easy application. Unlimited assembly time after application.

The Application Areas •Turbine Pedestal Bearing Parting planes

•Oil joints in turbines, engines.

•High temperature gear box flanges

•Diesel Engines cylinder head gasket.

•Inlet manifolds, oil sumps, •Thread sealing applications in drain plugs, etc.

•Corrosion protection of threads

Marston Approvals Marston Domsel supplies products to all leading companies in the field of aviation, power generation, engine manufacturing, gear construction, etc. OEM customers of Marston Domsel include Renk, Reinz, Thyssen, Deutz, MAN, Massey-Fergusson, Mercedes, Toyota, Shell, Texaco, AEG, Bosch, Siemens, Varta, Phillips, Caterpillar, Demag, Dynamit Nobel, SKF, Perkins, BASF, Bayer, Hapag Lloyd and many more machine, gear, seals and aircraft manufacturers Marston’s products are listed with NATO and German Federal Armed Forces, as well as many nuclear, gas and thermal power stations.

Imported and Marketed by: Project Sales Corp 28 Founta Plaza Suryabagh Visakhapatnam 530020 Call +91-891-2564393 Fax +91-891-2590482 sales@projectsalescorp.com

Oil Resistant Non-Hardening Universal

Jointing Compound for Turbine Joints

Packaging Available in 80 ml tubes. Made in Germany. Original imported packs. Unlimited shelf life.

Pro

ject

Sal

es C

orp.

Jul

y 20

11

QUIKSTEEL EPOXY PUTTY

Technical Data

PART NUMBERS:

FAST DRYING: QUIKSTEEL firmly sets in 15 minutes, and is completely cured and ready to drill, sand, tap, prime, machine and paint in one hour (longer in colder conditions).

STRONG: There are two ways strength is measured. One is on the horizontal plan – this is called "shear strength" and the other is on the vertical plane and this is called "tensile strength."

SHEAR STRENGTH – When cured (one-hour drying time) QUIKSTEEL has a shear strength of 740 pounds per square inch. This means that when two pieces of material are bonded together with a one-inch bond of QUIKSTEEL, it would take a pressure greater than 740 pounds to break the bond. For comparison, pine timber has a ‘shear strength’ of 400 pounds per square inch. QUIKSTEEL is almost twice as strong as pine timber.

TENSILE STRENGTH – QUIKSTEEL has a tensile strength of 6,200 pounds per square inch.

HARD: QUIKSTEEL is one of the hardest materials next to steel. Technically it is rated at D-87. "D" is the highest hardness rating in the Shore rating system. QUIKSTEEL can be compared to ABS plastic (material used to manufacturer automobiles) or the fibre epoxy wings on the B2 bomber. When cured, QUIKSTEEL can be machined in any way that steel or aluminium can be machined, drilled, tapped, milled, sanded, sawed, routed, primed, and painted. Anything you can do to metal or wood – you can do to QUIKSTEEL.

SEALS LEAKS UNDER WATER OR IN FLUIDS: QUIKSTEEL cures underwater and in all atmospheric conditions. Leaks can be sealed inside a container, tank, etc. with liquids still in the item to be sealed. Curing time is longer when used under water.

SEALS LEAKS WHILE LEAK IS OCCURING: If a petrol or diesel tank, oil pan, or any container has a rupture, QUIKSTEEL will seal the leak while the drainage is occurring. No need to empty container prior to repair.

IMPERVIOUS TO CHEMICALS: QUIKSTEEL is impervious to most chemicals including battery acids.

STEEL REINFORCED: QUIKSTEEL has the maximum holding power because it is steel reinforced, and manufactured using the highest grades of epoxy.

WITHSTANDS TEMPERATURES OF 260 DEGREES CELSIUS OR MORE: QUIKSTEEL maintains its qualities when exposed to temperatures in excess of 260 degrees Celsius. (+500oF)

LONG STORAGE LIFE: QUIKSTEEL has a minimum storage life of three years. This provides the user long storage life. QUIKSTEEL’S proprietary formula is the only brand that remains pliable before use. This insures easy mixing even after long periods of storage. DOES NOT CRACK OR FLAKE BEFORE USE.

IDEAL FOR REPAIR OF: Petrol and diesel fuel tanks, water tanks, swimming pool equipment, exhaust systems, boats, automobiles, trucks, plumbing, farm machinery, home, camping equipment, and hundreds of other applications.

QUIKSTEEL has world - wide approval to use with potable water (ANSI/NSF 61). NSF certifies all QUIKSTEEL brand epoxy putty products safe for the repair of drinking water pipes, holding tanks and dispensing components.

Project Sales Corp, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020

Call +91-891-2564393 Fax +91-891-2590482 mailto: sales@projectsalescorp.com

Unique Features of QuikSteel Part # 6004 from CarGo Blue Magic USA: No special tools or training required, just knead and apply Temperature Resistance 260 deg C Shear Strength 740 psi Tensile Strength 6200 psi Shore Hardness D-87 Works Underwater and seals leaks online NSF Certified Works on all metals including cast iron, aluminium, stainless steel, copper, brass

and on plastics, glass, ceramic, concrete and fiberglass too Shelf life 3 years from opening Sets in 15 minutes, full cure in one hour Resistant to all fluids including coolants, oils, petrol, diesel, solvents, alkalis and

most chemicals including battery acids

4 oz (113.6 grams) I Rs.400 Ea I Taxes Extra I Box of 12 I Immediate Deliveries I Call Project Sales Corp on +91-891-2564393 mail: sales@projectsalescorp.com

QuikSteel is imported and marketed by Project Sales Corp, Visakhapatnam under an arrangement with CarGo Chemical Company. For product MSDS please visit www.bluemagicusa.com. Data given are correct to the best of our knowledge. For tips and use instructions and get updates see us at www.facebook.com/QuikSteel

It’s so simple to use, you will feel this is exactly the repair material you have been looking for !

EngineerEngineer’’s s Blue Blue (Prussian (Prussian Blue) Blue) –– Stuarts Stuarts MicrometerMicrometer

Stuarts Micrometer Stuarts Micrometer --Engineers Marking Engineers Marking Blue gives a clear Blue gives a clear perfect mark on any perfect mark on any metal, in any light, metal, in any light, and being a lubricant and being a lubricant cannot damage cannot damage bearings or other bearings or other working parts.working parts.

The product is an intensely blue, soft, uniform paste that spreads easily and evenly to show high spots on bearings. It is most valuable when used on flat bearing surfaces of lathes, planers, milling machines, etc. A thin coating may be left on the surface day in and day out, and will not dry. The film remains “wet” and “transferable” and in condition for months. No nightly clean up or morning re-bluing is necessary.

Aids precision fitting of machined surfaces. Makes improper fitting high spots immediately visible as bright blue streaks.

Locates high spots on bearings, valves, gears and other close-to-tolerance components.

Available in 38 gms tins @Rs.550.00 Ea Ex-stock supplies. APVAT 14.5% or CST 2% as applicable extra. Dispatch through First Flight Courier across India locations.

Imported and Marketed by Project Sales Corp, India

Project Sales Corp, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP, IndiaCall 0891 6666482, 2564393 Fax 0891 2590482

Proactive Industrial Assembly Techniques – Saves your company time and money and gives you peace of mind !

No one services the Industrial Assembly and Maintenance Markets better than we do ! Our products are designed to assist you at the time of assembly. Our adhesives and sealants, anti-seize and assembly lubricants are designed for peak performance in wide temperature ranges, severe weather, and chemical exposure.

No matter you are looking at pipe fittings, gaskets, press-fits of bearings or keyways, nuts and bolts or O rings and Oil Seals, we can help you improve your equipment reliability, reduce downtime, increase your productivity, and best of all provide you peace of mind.

Several equipments failures are a result of mechanical assembly failures. Failures can happen through O ring and seal failures, alignment problems, loosening, leakages, scuffing, scoring, galling, seizing, fretting and more. Some of these can be easily be avoided by adopting proactive maintenance procedures. Let’s look at a few examples of components assembled and assemblies that you normally do.

‘O’ ring and oil seals come in contact with media and become brittle and a leak starts. This can be easily avoided with the use of rubber assembly lubricants1 that help lubricate and protect rubber components and form a protective barrier preventing the rubber from becoming brittle.

When you do press-fits, we recommend using a press-fit assembly paste2. This avoids scuffing and scoring of the shafts or components being press-fitted and prevents fretting corrosion that cause seizure. These pastes also allow easy disassembly after long periods of time.

There is more to following fasteners cross tightening sequence in assemblies. If a thread paste is not used, varying torque tension can occur in assembly and cause flange failures. In high temperatures, fasteners can seize if a proper anti-seize paste3 is not applied.

Pipe Threads can leak due to thread failures or gaps that can exist after tightening. Pipe Thread Sealants4 help in sealing metal and plastic pipes against steam, water, gas, etc and avoid leakage. Non-hardening products are always better.

Metal-to-Metal joints can have leakages due to asperities on the surfaces. These asperities can be filled up using appropriate sealants5 that can handle the required temperature, pressure, media and gap fill characteristics of the joint.

Contamination induced during an assembly can cause premature failure of several components including bearings. Preventing contamination at the time of assembly is easily avoided with the use of appropriate cleaners and degreasers6 and wipes.

Products Referenced in this mailer are some typical example of products available from Project Sales Corp. For a complete range, please drop us a mail or call us on +91-98851-49412

1 Molykote 111 O ring Lubricant 2 Molykote GN+ Paste/ G-Rapid Spray 3 Molykote 1000/ P37 4 Laco Slic-Tite/Pipe-tite Sealants 5 732 RTV, Arexons, Marston, Birkosit, etc 6 ASV Cleaners CS50, CS60, CS35

Explore your options with us.™     Write to us today at 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP or mail us at sales@projectsalescorp.com. You can fax us at 0891 2590482 or call us on 0891 2564393; 6666482.   

 

Price Schedule: Sealing Compounds:

1. Birkosit Dichtungskitt in 1 kg packs – Rs.4250 per KG 2. Marston Universal Jointing Compound 80 ml – Rs.200 per tube 3. Laco Products:

011175 PIPETITE STIK REGULAR Rs.100 Ea 013675 PLASTOJOINT STIK Rs.200 Ea 041209 SLICTITE PASTE 1/4 Pint – Rs.450 Ea 042019 SLICTITE PASTE 1/2 PT BRUSH IN CAP – Rs.750 Ea 044071 TAPE PIPE THREAD 1/2" X 260" – Rs.20 Ea 045090 CORD 3/32" X 50' CARDED – Rs.1500 Ea 11475 OYLTITE STICK 1lb – Rs.750 Ea 080220 B PAINTSTIK WHITE Rs.75 Ea 080221 B PAINTSTIK YELLOW Rs.100 Ea

4. QuikSteel Steel Reinforced Stick 113.6 grams – Rs.360 per stick 5. Arexons Motorsil D in 60 grams tube – Rs.475 per tube

Anti-seize Compounds and Assembly Pastes:

1. Molykote 1000 Anti-seize Paste 1 Kg packs – Rs.1330 per KG 2. Molykote P37 Ultra-pure Anti-seize 500 grams packs – Rs.2950 per pack 3. Molykote 111 O ring Compound in 1 kg packs – Rs.1550 per KG 4. Molykote GN+ Assembly Paste in 1 kg packs – Rs.1540 per KG 5. Molykote Z Powder in 1 kg packs – Rs.4300 per KG

Prices are excluding taxes.

CST 2% against form C will be charged for deliveries outside Andhra Pradesh and 14.5% VAT for deliveries within Andhra Pradesh.

Payments within 30 days

All deliveries will be FOR Destination – to your site locations as advised. Freight to our account

All items are normally in stock, subject to prior sales.  

 

 

 

 

 

 

 

 

Schamottkleber HT 1100 (REFRACTORY GLUE HT 1100) Its formulation of alkali silicate and mineral fillers makes it a heavy-duty glue at temperatures of up to 1100°C.

Uses include: - Fastening of thick string, glass fibre or ceramic fibre tresses. - Fastening of fireclay materials to metal parts exposed to intense heat. - Gluing of jacket tubes, sleeves and other fireclay parts - designed to adhere insulating board - Setting of fireclay bricks in stoves and heating units

High Pressure Hochdruck Fermit Non-toxic sealing filler, resistant to heat and high pressure, non-drying. For sealing of threads, flanges and surfaces of high pressure plants, turbine casings, etc. Temperature upto 160 deg, Pressure 16 bar. Most suitable as a Generator End Shield Sealant (eqv. to Tite-Seal)

Fermitol - Liquid synthetic resin sealant Universal sealing compound and glue, resistant to oil, liquefied petroleum gas, petrol, benzene, paraffin/kerosene, greases, water, steam, acid, alkaline solution, brine, seawater etc., once set also resistant to spirit and all fuel mixtures. For the sealing of threads, flanges and faces on petrol, oil, grease and water lines, oil heating units and propane gas units, engines, engine casings, gearboxes, cylinder heads, crank cases, machines, process equipment and tanks

Refractory Boiler Putty FROSCHMARKE Froschmarke refractory boiler putty is a potassium water glass-based sealing putty. Froschmarke refractory boiler putty is guaranteed to be resistant to open flames and temperatures of up to above +1000 °C. Has good adhesion, is non-shrinking, completely seals off smoke and gas. For boilers, furnaces and stoves.

3-D Filler Liquid Sealant for Small Leaks 3-D-sealant closes pores, cracks or damage to gaskets and seals on heating boilers, radiators, pumps, cylinder blocks and car radiators from the inside so that they are absolutely water and steam pressure-tight. Input quantity: 1 kg of 3-D-sealant for 150 l of heating water

Grafitpaste Nivo - sealing paste for threaded and flanged joints Prevents the sticking of gaskets, bolts, screws etc. which are exposed to intense heat. In the case of flange gaskets and surface seals, coat both sides with the paste.

Boilers, furnaces, ovens and more….introducing shortly a complete range of new sealing compounds in India…

www.projectsalescorp.com

For technical and material safety data sheets, please contact Satish Agrawal at +91-98851-49412 or mail to satish@projectsalescorp.com