Pressure Pipe Fittings

DIMENSIONAL CATALOG

Pres

sure

2001-2014 Charlotte Pipe and Foundry Company

DC-PR

PVC Schedule 80 Pipe and Fittings

PVC Schedule 40 Pipe and Fittings

FlowGuard Gold CPVC CTS Pipe and Fittings

ReUze CPVC CTS Pipe

(Updated July 18, 2014)

ReUze, Charlotte Pipe and You cant beat the system are registered trademarks of Charlotte Pipe and Foundry Company.

FlowGuard Gold is a registered trademark of Lubrizol Coporation.

PagePipe Data - PVC Schedule 80, Plain End................... 3

Pipe Data - PVC Schedule 80, Belled End ................. 4

Schedule 80 and Schedule 40 Tapered Socket Dimensions ........................................................ 5

American National Standard Taper Pipe Threads ....... 5

PVC Schedule 80 Fittings Dimensions and Weights .......................................................6-24

Pipe Data - PVC Schedule 40, Plain End................. 25

Pipe Data - PVC Schedule 40, Belled End ............... 26

Pipe Data - PVC Well Casing and SDR Pipe ............ 27

PVC Schedule 40 Fittings Dimensions and Weights .....................................................28-45

Pipe Data - FlowGuard CPVC CTS SDR 11 ........... 46

Pipe Data - ReUze CPVC CTS SDR 11 .................. 47

FlowGuard Gold CPVC CTS Fitting Dimensions ..... 48

FlowGuard Gold CPVC CTS Fittings Dimensions and Weights ..............................49-59Certification .....................................................60-61Limited Warranty ................................................... 62FlowGuard Gold Limited Warranty ........................ 63

PRESSURE PIPE AND FITTINGS DIMENSIONAL CATALOG

TABLE OF CONTENTS

3PVC

SCHEDULE

80

PIPE

Pipe Data

PVC 10002 14 x 20 04920 15140 0.540 .119 1130 PSI 10.0 PVC 10003 38 x 20 04917 9360 0.675 .126 920 PSI 13.8 PVC 10005 12 x 20 03968 6880 0.840 .147 850 PSI 20.3 PVC 10007 34 x 20 03969 4200 1.050 .154 690 PSI 27.5 PVC 10010 1 x 20 03970 3540 1.315 .179 630 PSI 40.5 PVC 10012 114 x 20 03973 4240 1.660 .191 520 PSI 55.9 PVC 10015 112 x 20 03976 3440 1.900 .200 470 PSI 67.7 PVC 10020 2 x 20 03977 1980 2.375 .218 400 PSI 93.6 PVC 10025 212 x 20 03978 1360 2.875 .276 420 PSI 142.8 PVC 10030 3 x 20 03979 960 3.500 .300 370 PSI 191.1 PVC 10040 4 x 20 03980 1080 4.500 .337 320 PSI 279.3 PVC 10060 6 x 20 03981 480 6.625 .432 280 PSI 532.7 PVC 10080 8 x 20 04175 300 8.625 .500 250 PSI 808.9 PVC 10100 10 x 20 04768 160 10.750 .593 230 PSI 1199.3 PVC 10120 12 x 20 04770 120 12.750 .687 230 PSI 1650.1 PVC 10140 14 x 20 04816 60 14.000 .750 220 PSI 1930.0 PVC 10160 16 x 20 04919 60 16.000 .843 220 PSI 2544.1

PVC Schedule 80 Pipe, Type 1, Grade 1 - Plain End

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 PVC SCHEDULE 80 (GRAY) PLAIN END PVC 1120 MAX WORK PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL PRESSURE AT WT. PER 611942- SKID (IN.) (IN.) 23 C OR 73 F 100 FT. (LBS.)

MADE INU.S.A.

Note: Full pallets are polyethylene wrapped for cleanliness and UV protection.

NSF Listed. Meets All Requirements of ASTM D 1784 and ASTM D 1785.

PVC Schedule 80 Pipe

Testing with or use of compressed air or gas in PVC / ABS / CPVC pipe or fittings can result in explosive failures and cause severe injury or death.

NEVER test with or transport/store compressed air or gas in PVC / ABS / CPVC pipe or fittings.

NEVER test PVC / ABS / CPVC pipe or fittings with compressed air or gas, or air over water boosters.

ONLY use PVC / ABS / CPVC pipe or fittings for water or approved chemicals.

Refer to warnings in PPFA User Bulletin 4-80 and ASTM D 1785.

4Pipe Data

MADE INU.S.A.

Note: Full pallets are polyethylene wrapped for cleanliness and UV protection.


PVC 10005B 12 x 20 04924 6880 0.840 .147 850 PSI 20.3 PVC 10007B 34 x 20 04925 4200 1.050 .154 690 PSI 27.5 PVC 10010B 1 x 20 04926 3540 1.315 .179 630 PSI 40.5 PVC 10012B 114 x 20 04927 4240 1.660 .191 520 PSI 55.9 PVC 10015B 112 x 20 04928 3440 1.900 .200 470 PSI 67.7 PVC 10020B 2 x 20 04764 1980 2.375 .218 400 PSI 93.6 PVC 10025B 212 x 20 04875 1360 2.875 .276 420 PSI 142.8 PVC 10030B 3 x 20 04776 960 3.500 .300 370 PSI 191.1 PVC 10040B 4 x 20 04774 1080 4.500 .337 320 PSI 279.3 PVC 10060B 6 x 20 04763 480 6.625 .432 280 PSI 532.7 PVC 10080B 8 x 20 04766 300 8.625 .500 250 PSI 808.9 PVC 10100B 10 x 20 04769 160 10.750 .593 230 PSI 1199.3 PVC 10120B 12 x 20 04771 120 12.750 .687 230 PSI 1650.1 PVC 10140B 14 x 20 04832 60 14.000 .750 220 PSI 1930.0 PVC 10160B 16 x 20 09372 60 16.000 .843 220 PSI 2544.1

PVC Schedule 80 Pipe, Type 1, Grade 1 - Belled End

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 PVC SCHEDULE 80 (GRAY) BELLED-END PVC 1120







MAX WORK PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL PRESSURE AT WT. PER 611942- SKID (IN.) (IN.) 23 C OR 73 F 100 FT. (LBS.)

5Schedule 80 Fittings

Schedule 80 and Schedule 40 Tapered Socket Dimensions

PVC SCHEDULE 80 - ASTM D 2467PVC SCHEDULE 40 - ASTM D 2466

American National StandardTaper Pipe Threads (NPT)ANSI / ASME B1.20.1, ASTM D 2464, ASTM F 1498

Effective Nominal Thread Threads Pitch of Size Length (L) Per Inch Thread (P)

12 0.5337 14.0 .07143 34 0.5457 14.0 .07143 1 0.6828 11.5 .08696 114 0.7068 11.5 .08696 112 0.7235 11.5 .08696 2 0.7565 11.5 .08696 212 1.1375 8.0 .12500 3 1.2000 8.0 .12500 4 1.3000 8.0 .12500

Schedule 80 and Schedule 40 Socket Diameter Schedule 80 Schedule 40 Nominal Entrance Bottom Tolerance Socket Length Socket Length Size A B C (Minimum) C (Minimum)

12 0.848 0.836 0.004 0.875 0.688 34 1.058 1.046 0.004 1.000 0.719 1 1.325 1.310 0.005 1.125 0.875 114 1.670 1.655 0.005 1.250 0.938 112 1.912 1.894 0.006 1.375 1.094 2 2.387 2.369 0.006 1.500 1.156 212 2.889 2.868 0.007 1.750 1.750 3 3.516 3.492 0.008 1.875 1.875 4 4.518 4.491 0.009 2.250 2.000 6 6.647 6.614 0.011 3.000 3.000 8 8.655 8.610 0.015 4.000 4.000 10 10.780 10.735 0.015 5.000 5.000 12 12.780 12.735 0.015 6.000 6.000

SCHEDULE

80

FITTINGS


Tee S x S x S

PVC PART NO. 8400

S=SOCKET,SPG=SPIGOT,MPT=MALEPIPETHREAD,FPT=FEMALEPIPETHREAD

ALLDIMENSIONSAREININCHES.

TOLERANCES

S = (SOCKETLENGTH)MINIMUM

G = (LAYINGLENGTH)INTERSECTIONOFCENTERLINESTOBOTTOMOFSOCKET/

THREAD,90ELBOWS,TEES,CROSSES,1/32

H = INTERSECTIONOFCENTERLINESTOFACEOFFITTINGS;90ELBOWS,TEES,

CROSSES,1/32

J = (LAYINGLENGTH)INTERSECTIONOFCENTERLINESTOBOTTOMOFSOCKET/

THREAD;45ELBOWS,1/32

L = OVERALLLENGTHOFFITTINGS,(INCLUDINGCAPS),1/16

M = OUTSIDEDIAMETEROFSOCKET/THREADHUB,1/16

N = SOCKET/THREADBOTTOMTOSOCKET/THREADBOTTOM;COUPLINGS,1/16

DIMENSIONSARESUBJECTTOCHANGEWITHOUTNOTIFICATION.

Universal Approx Size Part Number L H G Wt. (Lbs.)

12 801-005 21516 11532 1932 0.11 34 801-007 3716 12332 1116 0.17 1 801-010 4 2 2732 0.29 114 801-012 4916 2932 1 0.42 112 801-015 478 2716 1132 0.51 2 801-020 534 278 1516 0.84 212 801-025 61516 31532 12132 1.49 3 801-030 712 334 12732 2.38 4 801-040 938 41116 2716 3.76 6 801-060 1418 7116 4132 10.75 8 801-080 171932 81316 434 20.13

7 Universal Apprpx. Size Part Number L H H1 G G1 Wt. (Lbs.)

34 x 34 x 12 801-101 3316 11932 12132 916 34 0.15 1 x 1 x 12 801-130 31532 134 11932 1932 1116 0.23 1 x 1 x 34 801-131 32132 11316 12732 1116 2732 0.23 114 x 114 x 1 801-168 214 218 2116 78 1516 0.36 112 x 112 x 34 801-210 4532 2332 2132 1116 1 0.36 112 x 112 x 1 801-211 412 214 2932 78 1532 0.42 112 x 112 x 114 801-212 518 258 2516 1316 1132 0.51 2 x 2 x 12 801-247 4532 2332 2532 916 114 0.44 2 x 2 x 34 801-248 41332 2732 2932 1116 114 0.48 2 x 2 x 1 801-249 434 238 2916 78 11332 0.60 2 x 2 x 112 801-251 538 21116 21316 1316 11332 0.73 3 x 3 x 2 801-338 658 3516 31132 1716 11316 1.62 4 x 4x 2 801-420 7916 32532 418 112 21932 2.77 4 x 4x 3 801-422 858 4516 4532 2116 21932 3.13 6x 6 x 2 801-528 91732 42532 5116 134 31732 6.16 6x 6 x 4 801-532 1112 534 6 22332 32332 7.21 8x8x6 801-585 1558 71316 718 334 4116 15.29

Schedule 80 Fittings

Reducing Tee S x S x S

PVC PART NO. 8400

SCHEDULE

80

FITTINGS


Universal Apprpx. Size Part Number L H G H1 G1 Wt. (Lbs.) 12 802-005 21316 11332 1732 11132 1932 0.15 34 802-007 3316 12132 2132 11732 2532 0.22 1 802-010 31116 12732 2332 11316 1316 0.34

Tee S x S x FPT

PVC PART NO. 8401

Universal Approx. Size Part Number L H G Wt. (Lbs.)

12 805-005 258 1516 1732 0.14 34 805-007 21516 11532 2132 0.19 1 805-010 3716 12332 34 0.34 114 805-012 378 11516 1516 0.48 112 805-015 4316 2332 1132 0.64 2 805-020 434 238 1516 0.90 212 805-025 614 318 1916 1.83 3 805-030 7116 31732 12932 2.73 4 805-040 8716 4732 21532 4.49

Tee FPT x FPT x FPT

PVC PART NO. 8402

9 Universal Approx. Size Part Number H G Wt. (Lbs.)

12 806-005 11532 1932 0.08 34 806-007 11116 1116 0.13 1 806-010 2 2732 0.19 114 806-012 2932 1 0.32 112 806-015 2716 1132 0.42 2 806-020 22732 1516 0.63 212 806-025 3716 12132 1.13 3 806-030 334 12732 1.60 4 806-040 41116 2716 2.85 6 806-060 61116 31116 8.27 8 806-080 81932 41932 15.46


90 Degree Elbow S x S

PVC PART NO. 8300

90 Degree Elbow S x FPT

PVC PART NO. 8301

Universal Approx. Size Part Number H G H1 G1 Wt. (Lbs.)

12 807-005 138 12 11332 2232 .138 34 807-007 12132 58 158 1316 .173 1 807-010 12732 2332 12532 2732 .265 114 807-012 214 114 2 1 .434 112 807-015 238 1 218 1116 .562 2 807-020 234 114 2716 1716 .802

SCHEDULE

80

FITTINGS

10


Universal Approx. Size Part Number T G H Wt. (Lbs.)

12 808-005 34 2132 11332 0.11 34 808-007 2532 2732 158 0.18 1 808-010 3132 34 12332 0.26 114 808-012 1 3132 13132 0.42 112 808-015 1116 1532 2732 0.54 2 808-020 1332 11332 212 0.82 212 808-025 1916 1916 318 1.34 3 808-030 158 11516 3916 2.30 4 808-040 11116 212 4316 3.62

90 Degree Elbow FPT x FPT

PVC PART NO. 8302

Universal Approx. Size Part Number H J Wt. (Lbs.)

12 817-005 1532 14 0.07 34 817-007 11132 516 0.10 1 817-010 11532 516 0.16 114 817-012 11116 1332 0.22 112 817-015 178 12 0.30 2 817-020 2532 2132 0.48 212 817-025 212 2332 0.83 3 817-030 21116 2532 1.16 4 817-040 3916 1932 2.21 6 817-060 5 2 5.50 8 817-080 614 214 10.42


PVC PART NO. 8309

11



PVC PART NO. 8312

Universal Approx. Size Part Number H J T Wt. (Lbs.)

12 819-005 1132 932 34 0.07 34 819-007 118 1132 2532 0.10 1 819-010 11132 38 3132 0.16 114 819-012 1716 716 1 0.23 112 819-015 1916 1732 1132 0.31 2 819-020 134 2332 1132 0.46 212 819-025 212 1116 11316 1.10 3 819-030 234 78 178 1.74 4 819-040 314 118 218 3.03

Wye S x S x S

PVC PART NO. 8600

SCHEDULE

80

FITTINGS

*Maximumpressureratingis250psiat73F.

Universal Approx. Size Part Number L J H Wt. (Lbs.)

112* 875-015 3116 1116 21332 0.65 2* 875-020 378 2132 3732 1.06 3* 875-030 41516 1116 6916 2.51

12


Coupling S x S

PVC PART NO. 8100

Wye S x S x S

PVC PART NO. 8600

Universal Approx. Size Part Number L N Wt. (Lbs.)

12 829-005 11516 18 0.05 34 829-007 2316 18 0.08 1 829-010 2716 18 0.12 114 829-012 21116 18 0.17 112 829-015 21516 18 0.23 2 829-020 3316 18 0.33 212 829-025 334 316 0.57 3 829-030 4 316 0.84 4 829-040 434 316 1.35 6 829-060 6932 14 3.46 8 829-080 814 14 6.61

**Maximumpressureratingis150psiat73F.

Universal Approx. Size Part Number L J H Wt. (Lbs)

4** 875-040 6316 1316 538 4.42 6** 875-060 938 11332 73132 11.95

13


Reducer Coupling S x S

PVC PART NO. 8100


34 x 12 829-101 2316 14 0.07 1 x 12 829-130 238 516 0.11 1 x 34 829-131 2716 14 0.11 114 x 1 829-168 234 516 0.17 112 x 1 829-211 278 516 0.21 112 x 114 829-212 21516 14 0.23 2 x 1 829-249 312 38 0.32 2 x 112 829-251 3316 78 0.32 3 x 2 829-338 418 34 0.78 4 x 2 829-420 518 1516 1.32 4x 3 829-422 518 1516 1.38 6 x 4 829-532 658 138 3.08

SCHEDULE

80

FITTINGS

Coupling FPT x FPT

PVC PART NO. 8102


12 830-005 158 18 0.08 34 830-007 11116 18 0.09 1 830-010 2116 18 0.15 114 830-012 2316 18 0.23 112 830-015 214 316 0.28 2 830-020 2516 316 0.36 212 830-025 3516 316 0.80 3 830-030 312 18 1.09 4 830-040 358 18 1.61

14


Female Adapter S x FPT

PVC PART NO. 8101


12 835-005 12532 332 0.07 34 835-007 11516 332 0.10 1 835-010 2932 332 0.16 114 835-012 238 18 0.22 112 835-015 2916 18 0.27 2 835-020 22332 332 0.39 212 835-025 31932 732 0.73 3 835-030 334 732 0.96 4 835-040 414 14 1.52

Male Adapter S x MPT

PVC PART NO. 8109


12 836-005 11316 316 0.05 34 836-007 238 14 0.06 1 836-010 2 316 0.10 114 836-012 212 14 0.15 112 836-015 258 14 0.19 2 836-020 278 932 0.27 212 836-025 31116 1132 0.50 3 836-030 378 38 0.73 4 836-040 412 716 1.40

15


Reducer Bushing, Flush StyleSPG x S

PVC PART NO. 8107


34 x 12 837-101 1932 1332 0.02 1 x 12 837-130 11332 1732 0.07 1 x 34 837-131 11332 1332 0.04 114 x 12 837-166 112 58 0.11 114 x 34 837-167 112 12 0.11 114 x 1 837-168 11932 1532 0.08 112 x 12 837-209 12332 2732 0.15 112 x 34 837-210 12332 2332 0.20 112 x 1 837-211 12332 1932 0.14 112 x 114 837-212 12332 1532 0.08 2 x 12 837-247 178 1 0.21 2 x 34 837-248 178 78 0.22 2 x 1 837-249 178 34 0.24 2 x 114 837-250 178 58 0.24 2 x 112 837-251 12932 1732 0.17 212 x 1 837-289 2532 1 0.46 212 x 114 837-290 2532 2932 0.48 212 x 112 837-291 2532 2532 0.39 212 x 2 837-292 2532 2132 0.28 3 x 1 837-335 214 118 0.67 3 x 114 837-336 214 1 0.66 3 x 112 837-337 214 78 0.64 3 x 2 837-338 214 34 0.59 3 x 212 837-339 214 12 0.42 4 x 2 837-420 22532 932 1.10 4x 3 837-422 22532 2932 0.76 6 x 3 837-530 31732 11132 2.60 6 x 4 837-532 31732 1932 2.50 8 x 6 837-585 41516 178 5.52

SCHEDULE

80

FITTINGS

16


Reducer Bushing, Flush StyleSPG x FPT

PVC PART NO. 8108

Universal Approx. Size Part Number L SPG N Wt. (Lbs.)

34 x 12 838-101 114 1132 12 0.03 1 x 12 838-130 1716 1532 1116 0.06 1 x 34 838-131 138 1532 1932 0.04 114 x 1 838-168 1916 1932 916 0.09 112 x 34 838-210 134 11332 1932 0.16 112 x 1 838-211 134 11332 1132 0.15 112 x 114 838-212 12132 11332 2132 0.10 2 x 34 838-248 178 11732 1332 0.23 2 x 1 838-249 178 11732 2732 0.28 2 x 114 838-250 12932 11732 1332 0.24 2 x 112 838-251 12932 11732 78 0.19 212 x 112 838-291 2316 12532 1532 0.43 212 x 2 838-292 2316 12532 1532 0.31 3 x 2 838-338 2932 12932 1732 0.64 3 x 212 838-339 2932 12932 2732 0.49 4 x 2 838-420 21116 2516 11116 1.11 4x 3 838-422 21116 2516 11116 0.86

17


Reducer Bushing, Flush StyleMPT x FPT

PVC PART NO. 8200

Universal Approx. Size Part Number L N T1 Wt. (Lbs.)

34 x 12 839-101 1 932 34 0.02 1 x 12 839-130 114 1732 34 0.05 1 x 34 839-131 114 932 34 0.04 114 x 1 839-168 1516 516 1 0.06 112 x 1 839-211 138 516 1 0.11 112 x 114 839-212 138 516 1 0.07 2 x 1 839-249 1716 516 1 0.19 2 x 112 839-251 1716 516 1 0.13 212 x 2 839-292 11516 38 1 0.24 3 x 2 839-338 2 38 1 0.51 3 x 212 839-339 2 716 158 0.38 4 x 2 839-420 21116 38 2516 0.99

SCHEDULE

80

FITTINGS

18


CapS

PVC PART NO. 8116

Universal Approx. Size Part Number S L Wt. (Lbs.)

12 847-005 78 138 0.04 34 847-007 1 11532 0.06 1 847-010 118 158 0.09 114 847-012 114 11316 0.15 112 847-015 138 2 0.18 2 847-020 112 2532 0.28 212 847-025 134 21932 0.51 3 847-030 178 21316 0.72 4 847-040 214 3516 1.20 6 847-060 3 41116 3.10 8 847-080 4 6716 6.11

Cap FPT

PVC PART NO. 8117

Universal Approx. Size Part Number T L Wt. (Lbs.)

12 848-005 34 1132 0.05 34 848-007 78 1732 0.06 1 848-010 1 138 0.11 114 848-012 1 11732 0.15 112 848-015 1132 158 0.19 2 848-020 1132 11316 0.29 212 848-025 1516 21532 0.54 3 848-030 1716 22332 0.80 4 848-040 112 3 1.30

19


Plug MPT

PVC PART NO. 8113

Universal Approx. Size Part Number L T Wt. (Lbs.)

12 850-005 1516 34 0.02 34 850-007 1 34 0.03 1 850-010 114 1 0.05 114 850-012 1516 1 0.07 112 850-015 1516 1 0.10 2 850-020 112 1116 0.18

SCHEDULE

80

FITTINGSFlange, One Piece**

S

PVC PART NO. 8500

Universal Size Part Number D L N R

12 851-005 312 118 732 916 34 851-007 378 1316 316 916 1 851-010 414 1516 316 58 114 851-012 41932 1716 316 1116

* BOLTLENGTHSWERECALCULATEDUSINGTWOCHARLOTTEFLANGES. LENGTHSMAYVARYWHENMATINGWITHOTHERBRANDSORACCESSORIES.**THEMAXIMUMWORKINGPRESSUREIS150PSIAT73F.

BOLT CIRCLE BOLT HOLE NO. OF BOLT BOLT MIN. BOLT Approx. Size DIA. DIA. HOLES DIA. LENGTH* Wt. (Lbs.)

12 238 58 4 12 214 0.18 34 234 58 4 12 214 0.25 1 318 58 4 12 214 0.33 114 312 58 4 12 212 0.43

20

BOLT BOLT NO. OF BOLT MIN. BOLT Approx. Size CIRCLE DIA. HOLE DIA. BOLT HOLES DIA. LENGTH* Wt. (Lbs.)

12 238 58 4 12 214 0.19 34 234 58 4 12 214 0.25 1 318 58 4 12 214 0.33 114 312 58 4 12 212 0.44 112 378 58 4 12 212 0.57 2 434 34 4 58 3 0.92


* BOLTLENGTHSWERECALCULATEDUSINGTWOCHARLOTTEFLANGES. LENGTHSMAYVARYWHENMATINGWITHOTHERBRANDSORACCESSORIES.** THEMAXIMUMWORKINGPRESSUREIS150PSIAT73F.

Flange, One Piece**FPT

PVC PART NO. 8560


12 852-005 312 1 14 916 34 852-007 378 1 316 1932 1 852-010 414 118 18 2132 114 852-012 41932 1732 732 2332 112 852-015 5 114 14 1316 2 852-020 6 134 38 1316

21


SCHEDULE

80

FITTINGS


Blind Flange, One Piece**PVC PART NO. 8510

Universal BOLT BOLT NO. OF MIN. Approx. Part CIRCLE HOLE BOLT BOLT BOLT Wt. Size Number D R DIA. DIA. HOLES DIA. LENGTH* (Lbs.)

2 853-020 578 1316 4 34 34 4 58 3 0.84 3 853-030 7716 2932 6 34 4 58 334 1.58 4 853-040 9132 1116 7 12 34 8 58 312 2.50 8 853-080 1312 11532 112332 1516 8 34 412 7.83

22


Van Stone Flange** S

PVC PART NO. 8530



112 854-015 41516 1916 332 2332 2 854-020 578 12332 332 1316 212 854-025 61116 13132 18 2932 3 854-030 7716 218 18 2932 4 854-040 9132 258 18 1116 6 854-060 103132 3732 18 1732 8 854-080 131132 4516 316 112 10 854-100 16 51116 58 11116 12 854-120 19 7516 916 11116

BOLT CIRCLE BOLT HOLE NO. OF BOLT BOLT MIN. BOLT Approx. Size DIA. DIA. HOLES DIA. LENGTH* Wt. (Lbs.)

112 378 58 4 12 212 0.54 2 434 34 4 58 3 0.84 212 512 34 4 58 314 1.27 3 658 34 4 58 314 1.55 4 712 34 8 58 312 2.71 6 912 3132 8 34 4 3.88 8 1134 2932 8 34 412 7.21 10 1414 1 12 78 5 12.59 12 17 1 12 78 5 20.74

23


Union, with Viton O-Ring Seal*S

PVC PART NO. 8700

Union, with EPDM O-Ring Seal*S

PVC PART NO. 8710

Universal Part Number with Viton with EPDM Approx. Size O-Ring Seal O-Ring Seal L N S Wt. (Lbs.)

12 857-005 897-005 218 516 2932 0.18 34 857-007 897-007 2716 716 1 0.26 1 857-010 897-010 258 38 118 0.36 114 857-012 897-012 21516 716 114 0.52 112 857-015 897-015 3316 716 138 0.57 2 857-020 897-020 32132 2132 112 0.90 3 857-030 897-030 518 1516 12932 2.22 * THEMAXIMUMWORKINGPRESSUREIS235PSIAT73F.

SCHEDULE

80

FITTINGS

Union, with Viton O-Ring Seal*FPT

PVC PART NO. 8800

Union, with EPDM O-Ring Seal*FPT

PVC PART NO. 8810 Universal Part Number with Viton with EPDM Approx. Size O-Ring Seal O-Ring Seal L N T Wt. (Lbs.)

12 858-005 898-005 2316 12 1516 0.19 34 858-007 898-007 21332 916 1332 0.27 1 858-010 898-010 258 916 1332 0.40 114 858-012 898-012 23132 2332 114 0.58 112 858-015 898-015 318 2332 11132 0.67 2** 858-020 898-020 358 2732 11932 1.03 3 858-030 898-030 518 134 11116 2.49 * THEMAXIMUMWORKINGPRESSUREIS235PSIAT73F. ** THEMAXIMUMWORKINGPRESSUREIS200PSIAT73F. THEMAXIMUMWORKINGPRESSUREIS185PSIAT73F.

24


Union, with Viton O-Ring Seal*S x FPT

PVC PART NO. 8820

Union, with EPDM O-Ring Seal*S x FPT

PVC PART NO. 8830

Universal Part Number with Viton with EPDM Approx. Size O-Ring Seal O-Ring Seal L N S Wt. (Lbs.)

12 859-005 899-005 218 516 1516 0.18 34 859-007 899-007 2716 716 1332 0.27 1 859-010 899-010 258 38 1332 0.37 114 859-012 899-012 21516 716 114 0.52 112 859-015 899-015 3316 716 11132 0.62 2** 859-020 899-020 32132 2132 11932 0.98 3 859-030 899-030 518 1516 11116 2.46 * THEMAXIMUMWORKINGPRESSUREIS235PSIAT73F. ** THEMAXIMUMWORKINGPRESSUREIS200PSIAT73F. THEMAXIMUMWORKINGPRESSUREIS185PSIAT73F.

25

Pipe Data

PVC

SCHEDULE

40

PIPE

PVC 4005 12 x 10 06658 .840 .109 600 PSI 15.9 PVC 4005 12 x 20 03922 .840 .109 600 PSI 15.9 PVC 4007 34 x 10 06661 1.050 .113 480 PSI 21.1 PVC 4007 34 x 20 03925 1.050 .113 480 PSI 21.1 PVC 4010 1 x 10 06664 1.315 .133 450 PSI 31.3 PVC 4010 1 x 20 03928 1.315 .133 450 PSI 31.3 PVC 7100* 114 x 10 03945 1.660 .140 370 PSI 42.4 PVC 7100* 114 x 20 03946 1.660 .140 370 PSI 42.4 PVC 7112* 112 x 10 03947 1.900 .145 330 PSI 50.7 PVC 7112* 112 x 20 03948 1.900 .145 330 PSI 50.7 PVC 7200* 2 x 10 03949 2.375 .154 280 PSI 68.1 PVC 7200* 2 x 20 03950 2.375 .154 280 PSI 68.1 PVC 4025 212 x 20 04205 2.875 .203 300 PSI 108.0 PVC 7300* 3 x 10 03951 3.500 .216 260 PSI 141.2 PVC 7300* 3 x 20 03952 3.500 .216 260 PSI 141.2 PVC 7400 4 x 10 03953 4.500 .237 220 PSI 201.2 PVC 7400 4 x 20 03954 4.500 .237 220 PSI 201.2 PVC 7500 5 x 20 04837 5.563 .258 190 PSI 272.5 PVC 7600 6 x 10 03955 6.625 .280 180 PSI 353.7 PVC 7600 6 x 20 03956 6.625 .280 180 PSI 353.7 PVC 7800 8 x 10 13087 8.625 .322 160 PSI 532.3 PVC 7800 8 x 20 03958 8.625 .322 160 PSI 532.3 PVC 7910 10 x 20 03959 10.750 .365 140 PSI 754.7 PVC 7912 12 x 20 03961 12.750 .406 130 PSI 997.9 PVC 7914 14 x 20 04862 14.000 .437 130 PSI 1180.1 PVC 7916 16 x 20 04918 16.000 .500 130 PSI 1543.1

MADE INU.S.A.

PVC Schedule 40 Pipe - Plain End

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665


PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 1785 MAX WORK PART NO. NOM. SIZE UPC # AVG. OD MIN. WALL PRESSURE WT. PER 611942- (IN.) (IN.) AT 23 C OR 73 F 100 FT. (LBS.)

* Dual Marked ASTM D 1785 & ASTM D 2665. Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480. Dual Marked ASTM D 1785 & ASTM F 480.


Note: When ordering, please specify plain end or bell end.






26

Pipe Data

PVC 4005B** 12 x 10 04986 .840 .109 600 PSI 2.00 15.9 PVC 4005B** 12 x 20 03923 .840 .109 600 PSI 2.00 15.9 PVC 4007B** 34 x 10 04987 1.050 .113 480 PSI 2.25 21.1 PVC 4007B** 34 x 20 03926 1.050 .113 480 PSI 2.25 21.1 PVC 4010B** 1 x 10 04988 1.315 .133 450 PSI 2.50 31.3 PVC 4010B** 1 x 20 03929 1.315 .133 450 PSI 2.50 31.1 PVC 4012B 114 x 10 04989 1.660 .140 370 PSI 2.75 42.4 PVC 4012B 114 x 20 03930 1.660 .140 370 PSI 2.75 42.4 PVC 4015B 112 x 10 04990 1.900 .145 330 PSI 3.00 50.7 PVC 4015B 112 x 20 03931 1.900 .145 330 PSI 3.00 50.7 PVC 4020B 2 x 10 04991 2.375 .154 280 PSI 4.00 69.2 PVC 4020B 2 x 20 03932 2.375 .154 280 PSI 4.00 69.2 PVC 4025B 212 x 10 04992 2.875 .203 300 PSI 4.00 110.0 PVC 4025B 212 x 20 04206 2.875 .203 300 PSI 4.00 110.0 PVC 7300B 3 x 10 04853 3.500 .216 260 PSI 4.00 145.1 PVC 4030B 3 x 20 03933 3.500 .216 260 PSI 4.00 144.5 PVC 7400B 4 x 10 04835 4.500 .237 220 PSI 4.00 207.9 PVC 9400B 4 x 20 03964 4.500 .237 220 PSI 5.00 206.2 PVC 7600B 6 x 10 04850 6.625 .280 180 PSI 6.50 371.4 PVC 9600B 6 x 20 03965 6.625 .280 180 PSI 6.50 365.5 PVC 7800B 8 x 10 09903 8.625 .322 160 PSI 7.00 556.9 PVC 9800B 8 x 20 03967 8.625 .322 160 PSI 7.00 552.3 PVC 7910B 10 x 20 03960 10.750 .365 140 PSI 9.00 785.4 PVC 7912B 12 x 20 03962 12.750 .406 130 PSI 10.00 1046.7 PVC 7914B 14 x 20 04863 14.000 .437 130 PSI 10.00 1180.1 PVC 7916B 16 x 20 04929 16.000 .500 130 PSI 10.00 1543.1

MADE INU.S.A.

PVC Schedule 40 Pipe - Bell End*

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 PVC SCHEDULE 40 (WHITE) BELL END PVC 1120 ASTM D 1785 MAX WORK PART NO. NOM. SIZE UPC # AVG. OD MIN. WALL PRESSURE AT BELL DEPTH WT. PER 611942- (IN.) (IN.) 23 C OR 73 F (IN.) 100 FT. (LBS.)

* Bell dimensions meet either ASTM D 2672 or ASTM F 480, depending upon pipe diameter** ASTM D 1785 Dual Marked ASTM D 1785 & ASTM F 480 Dual Marked ASTM D 1785 & ASTM D 2665 Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480






27

Pipe Data

PVC

WELLCASING

&

SDR

PIPE

PVC 4020B 2 x 20 03932 2.375 .154 4.00 69.2 PVC 4025B 212 x 20 04206 2.875 .203 4.00 110.0 PVC 4030B 3 x 20 03933 3.500 .216 4.00 144.5 PVC 9400B 4 x 20 03964 4.500 .237 5.00 206.2 PVC 9600B 6 x 20 03965 6.625 .280 6.50 365.5 PVC 9800B 8 x 20 03967 8.625 .322 7.00 552.3 PVC 7910B 10 x 20 03960 10.750 .365 9.00 785.4PVC 7912B 12 x 20 03962 12.750 .406 10.00 1046.7PVC 7914B 14 x 20 04863 14.000 .437 10.00 1180.1PVC 7916B 16 x 20 04929 16.000 .500 10.00 1543.1

PVC Well CasingPVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 PVC SCHEDULE 40 (WHITE) BELL END WELL CASING PVC 1120 ASTM F 480

PART NO. NOM. SIZE UPC # AVG. OD MIN. WALL BELL DEPTH WT. PER 611942- (IN.) (IN.) (IN.) 100 FT. (LBS.)

Note: When ordering, please specify plain end or bell end.

MADE INU.S.A.

PVC 23155B *12 x 20 03991 .840 .062 315 PSI 2.00 10.0 PVC 20007B 34 x 10 10742 1.050 .060 200 PSI 2.25 11.8 PVC 20007B 34 x 20 03984 1.050 .060 200 PSI 2.25 11.8 PVC 20010B 1 x 20 03986 1.315 .063 200 PSI 2.50 15.7 PVC 20012B 114 x 20 03987 1.660 .079 200 PSI 2.75 24.9 PVC 20015B 112 x 20 03988 1.900 .090 200 PSI 3.00 32.4 PVC 20020B 2 x 20 03989 2.375 .113 200 PSI 4.00 50.9*PR 315 / SDR 13.5

PVC SDR PipePVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 PR 200 PVC 1120 BELL END ASTM D 2241 SDR 21

MAX WORK PART NO. NOM. SIZE UPC # AVG. OD MIN. WALL PRESSURE AT BELL DEPTH WT. PER 611942- (IN.) (IN.) 23 C OR 73 F (IN.) 100 FT. (LBS.)

PVC 16012B 114 x 20 04211 1.660 .064 160 PSI 2.75 20.3 PVC 16015B 112 x 20 04210 1.900 .073 160 PSI 3.00 26.6 PVC 16020B 2 x 20 04212 2.375 .091 160 PSI 4.00 41.4 PVC 16030B 3 x 20 04222 3.500 .135 160 PSI 4.00 92.3

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 PR 160 PVC 1120 BELL END ASTM D 2241 SDR 26 MAX WORK BELL PART NO. NOM. SIZE UPC # AVG. OD MIN. WALL PRESSURE AT DEPTH WT. PER 611942- (IN.) (IN.) 23 C OR 73 F (IN.) 100 FT. (LBS.)






28


Tee S x S x S

PVC PART NO. 2400

Universal Approx. Size Part Number L H G Wt. (Lbs)

12 401-005 212 114 12 0.067 34 401-007 318 1916 916 0.079 1 401-010 31116 12732 1116 0.136 114 401-012 414 218 78 0.310 112 401-015 458 2516 1 0.340 2 401-020 514 258 114 0.412 212 401-025 612 314 112 0.944 3 401-030 758 31316 11316 1.361 4 401-040 834 438 2516 2.212 6 401-060 14 7 312 7.158 8 401-080 17116 81732 412 12.332

29

Universal Apprpx. Size Part Number L H G H1 G1 Wt. (Lbs.)

12 x 12 x 34 401-074 278 1716 1116 11732 1732 0.082 34 x 12 x 34 401-095 314 112 34 12132 2132 0.106 34 x 34 x1 401-102 358 11316 1316 12532 2132 0.134 1 x 1 x 12 401-130 338 11116 916 158 78 0.134 1 x 1 x 34 401-131 3916 12532 58 11316 1316 0.148 114 x 114 x 12 401-166 312 134 12 158 78 0.196 114 x 114 x 34 401-167 31316 12932 2132 2 1 0.226 112 x 112 x 12 401-209 334 178 916 178 118 0.234 112 x 112 x 34 401-210 31516 2 1116 2 1 0.256 112 x 112 x 1 401-211 414 218 1316 2732 1332 0.294 2 x 2 x 34 401-248 4116 2132 2132 238 138 0.320 2 x 2 x 1 401-249 438 2316 1316 21732 138 0.383 2 x 2 x 114 401-250 434 238 1 258 138 0.436 2 x 2 x 112 401-251 5 212 118 21116 138 0.479 3 x 3 x 2 401-338 61116 31132 11132 3316 11316 1.100 4 x 4 x 2 401-420 61316 31332 11132 378 21532 1.594 4 x 4 x 3 401-422 818 4116 2 438 238 1.982 6 x 6 x 4 401-532 12116 6132 21732 558 3916 4.900


Reducing Tee S x S x S

PVC PART NO. 2400

SCHEDULE

40

FITTINGS

30

Universal Approx. Size Part Number L H G H1 G1 Wt. (Lbs.)

12 402-005 2916 1932 1732 1932 1732 0.077 34 402-007 3516 12132 2132 11332 1932 0.130 1 402-010 31316 12932 2532 12932 2932 0.184 114 402-012 41532 214 1 214 1 0.292 112 402-015 478 2716 118 2716 1532 0.408 2 402-020 512 234 138 238 1916 0.535


Tee S x S x FPT

PVC PART NO. 2401

Universal Approx. Size Part Number L H G H1 G1 Wt. (Lbs.)

34 x 34 x 12 402-101 318 1916 916 11332 2132 0.122 1 x 1 x 12 402-130 3516 12132 1732 11732 2532 0.142 1 x 1 x 34 402-131 3916 12532 2132 12532 1132 0.158 114 x 114 x 12 402-166 3916 12532 1732 12332 1 0.202 114 x 114 x 34 402-167 31316 12932 2132 13132 114 0.232 114 x 114 x 1 402-168 418 2116 1316 218 118 0.280 112 x 112 x 12 402-209 312 134 716 12732 1332 0.230 112 x 112 x 34 402-210 31516 13132 2132 11316 1332 0.256 112 x 112 x 1 402-211 414 218 1316 214 114 0.326 2 x 2 x 1 402-249 438 2316 1316 2316 1516 0.420 2 x 2 x 114 402-250 434 238 1 258 158 0.450

Reducing Tee S x S x FPT

PVC PART NO. 2401

31



PVC PART NO. 2300

Universal Approx. Size Part Number H G Wt. (Lbs)

12 406-005 114 12 0.048 34 406-007 1916 916 0.055 1 406-010 11316 1116 0.100 114 406-012 218 78 0.200 112 406-015 2516 1 0.256 2 406-020 258 1732 0.316 212 406-025 314 112 0.770 3 406-030 31316 11316 1.040 4 406-040 438 2516 1.722 6 406-060 7 312 5.234 8 406-080 81732 412 9.139

Reducing 90 Degree Elbow S x S

PVC PART NO. 2300


34 x 12 406-101 11732 1732 1932 1732 0.070 1 x 12 406-130 11116 916 1916 1316 0.116 1 x 34 406-131 12532 2132 12532 2532 0.128

SCHEDULE

40

FITTINGS

32


12 407-005 114 12 114 1732 0.064 34 407-007 1916 916 1916 1316 0.100 1 407-010 178 34 178 78 0.166 112 407-015 2516 1 2516 114 0.355 2 407-020 21116 1516 21732 11132 0.534


90 Degree Elbow S x FPT

PVC PART NO. 2301

Reducing 90 Degree Elbow S x FPT

PVC PART NO. 2301


34 x 12 407-101 112 12 138 1932 0.102 1 x 34 407-131 12532 2132 11932 2732 0.135

33


Universal Approx. Size Part Number H G Wt. (Lbs)

12 408-005 1516 1732 0.070 34 408-007 11532 2132 0.098 1 408-101 11316 1316 0.164


PVC PART NO. 2302

90 Degree Street Elbow SPG x S

PVC PART NO. 2304


12 409-005 1532 1332 112 34 0.050 34 409-007 138 916 11932 1316 0.077 1 409-010 11316 1116 218 1 0.127 112 409-015 2716 118 21932 1932 0.292 2 409-020 234 138 22732 11532 0.426

SCHEDULE

40

FITTINGS

34


90 Degree Street Elbow MPT x S

PVC PART NO. 2306


12 410-005 1532 1332 112 34 0.048 34 410-007 138 916 1132 932 0.076 1 410-010 11316 1116 218 1 0.135 114 410-012 2316 1516 214 114 0.219 112 410-015 2516 1 21332 11332 0.276 2 410-020 234 138 2916 1916 0.436

90 Degree Street Elbow MPT x FPT

PVC PART NO. 2307


34 412-007 11932 2732 1516 916 0.080

35


Side Outlet Elbow S x S x FPT

PVC PART NO. 2520

45 Degree ElbowS x S

PVC PART NO. 2309

Universal Approx. Size Part Number H J Wt. (Lbs)

12 417-005 1116 516 0.040 34 417-007 1516 516 0.047 1 417-010 1716 516 0.120 114 417-012 134 12 0.176 112 417-015 12932 1932 0.216 2 417-020 218 34 0.338 212 417-025 21532 1116 0.556 3 417-030 22732 2732 0.835 4 417-040 3532 1332 1.296 6 417-060 514 134 3.878 8 417-080 62732 21132 7.912


34 x 34 x 12 414-101 1916 916 112 34 0.112

SCHEDULE

40

FITTINGS

36


Cross S x S x S x S

PVC PART NO. 2410

Universal Approx. Size Part Number L H G Wt. (Lbs)

12 420-005 2916 1932 1732 0.080 34 420-007 3516 12132 2132 0.152 1 420-010 378 11516 1316 0.222 114 420-012 412 214 1 0.372 112 420-015 478 2716 118 0.450 2 420-020 512 234 138 0.678

Coupling S x S

PVC PART NO. 2100

Universal Approx. Size Part Number L N Wt. (Lbs)

12 429-005 178 18 0.028 34 429-007 218 18 0.038 1 429-010 238 18 0.067 114 429-012 258 18 0.136 112 429-015 2516 18 0.116 2 429-020 238 18 0.165 212 429-025 334 18 0.444 3 429-030 4 316 0.786 4 429-040 434 316 0.966 6 429-060 6932 932 2.218 8 429-080 814 14 4.370

37


34 430-007 112 18 0.050


Coupling FPT x FPT

PVC PART NO. 2102

Reducing Coupling S x S

PVC PART NO. 2100


34 x 12 429-101 178 18 0.052 1 x 34 429-131 214 18 0.080

SCHEDULE

40

FITTINGS

Riser Extension FPT x MPT

PVC PART NO. 2103

Universal Approx. Size Part Number L N T1 Wt. (Lbs)

12 x12 434-005 2116 34 34 0.042

38



12 435-005 12732 332 0.053 34 435-007 2332 332 0.067 1 435-010 2516 116 0.108 114 435-012 258 18 0.164 112 435-015 2716 532 0.148 2 435-020 238 14 0.186 212 435-025 31732 732 0.440 3 435-030 31316 316 0.604 4 435-040 31516 316 0.884

Female Adapter S x FPT

PVC PART NO. 2101

Universal Approx. Size Part Number L N T Wt. (Lbs)

34 x 12 435-074 134 316 78 0.043

Reducing Female Adapter FPT x SLIP

PVC PART NO. 2101S

39


Reducing Female Adapter S x FPT

PVC PART NO. 2101


34 x 12 435-101 13132 332 78 0.059 1 x 34 435-131 214 18 1 0.075


12 436-005 158 14 58 0.029 34 436-007 178 316 1116 0.037 1 436-010 2316 14 1316 0.080 114 436-012 2716 316 1 0.122 112 436-015 2716 732 1516 0.144 2 436-020 258 14 1 0.234 212 436-025 3916 316 158 0.388 3 436-030 378 14 158 0.546 4 436-040 4 14 11116 0.820 6 436-060 534 1116 1916 2.114

Male Adapter MPT x S

PVC PART NO. 2109

SCHEDULE

40

FITTINGS

40


Reducing Male Adapter MPT x S

PVC PART NO. 2110


12 x 34 436-074 11316 132 2532 0.036 34 x 12 436-101 158 18 34 0.031 34 x 1 436-102 2116 316 34 0.065 1 x 34 436-131 218 0 1 18 0.061 1 x 114 436-132 2516 316 78 0.112 114 x 1 436-168 238 316 1 0.107 114 x 112 436-169 212 316 1 0.152 112 x 114 436-212 21332 732 1516 0.132 112 x 2 436-213 2916 14 1516 0.207 2 x 112 436-251 21732 316 1132 0.192

41


Reducer Bushing, Flush Style SPG x S

PVC PART NO. 2107

Universal Approx. Size Part Number L SPG N Wt. (Lbs)

34 x 12 437-101 114 1 1132 0.023 1 x 12 437-130 138 118 1532 0.052 1 x 34 437-131 138 118 38 0.038 114 x 1 437-168 1916 114 516 0.069 112 x 12 437-209 1916 114 1316 0.112 112 x 34 437-210 1916 114 916 0.118 112 x 1 437-211 134 1716 58 0.114 112 x 114 437-212 11116 138 716 0.062 2 x 34 437-248 134 138 34 0.164 2 x 1 437-249 134 138 58 0.170 2 x 114 437-250 134 138 12 0.205 2 x 112 437-251 134 138 38 0.148 212 x 2 437-292 218 134 34 0.270 3 x 2 437-338 238 178 1 0.497 3 x 212 437-339 214 178 12 0.420 4 x 2 437-420 2516 2116 1516 0.888 4 x 3 437-422 2516 2116 516 0.736 6 x 4 437-532 358 3 158 2.001 8 x 4 437-582 41116 4116 258 3.712 8 x 6 437-585 41116 4116 1 3.852

SCHEDULE

40

FITTINGS

42


Universal Approx. Size Part Number L SPG N Wt. (Lbs)

34 x 12 438-101 114 1 12 0.029 1 x 12 438-130 138 118 58 0.053 1 x 34 438-131 138 118 58 0.042 114 x 12 438-166 1916 114 1316 0.120 114 x 34 438-167 1916 114 2732 0.115 114 x 1 438-168 1916 114 916 0.092 112 x 12 438-209 11116 1516 516 0.107 112 x 34 438-210 11116 1516 1332 0.163 112 x 1 438-211 11116 1516 1116 0.150 112 x 114 438-212 11116 1516 1116 0.100 2 x 12 438-247 134 138 1 0.214 2 x 34 438-248 134 138 3132 0.221 2 x 1 438-249 134 138 34 0.225 2 x 112 438-251 134 138 2332 0.185 3 x 212 438-339 2932 178 2732 0.490 4 x 2 438-420 234 2516 134 1.164 4 x 3 438-422 234 2516 118 0.910 6 x 4 438-532 4 312 214 1.976

Reducer Bushing, Flush Style SPG x FPT

PVC PART NO. 2108

43

Reducer Bushing MPT x FPT

PVC PART NO. 2112


Universal Approx. Size Part Number L T N Wt. (Lbs)

34 x 12 439-101 1 34 14 0.022 1 x 34 439-131 114 34 12 0.043 114 x 34 439-167 1516 34 916 0.092 114 x 1 439-168 1516 1 516 0.063 112 x 34 439-210 138 34 58 0.128 112 x 1 439-211 138 1 38 0.110 112 x 114 439-212 138 1 38 0.068 2 x 112 439-251 1716 1 716 0.143

Cap S

PVC PART NO. 2116

Universal Approx. Size Part Number L S Wt. (Lbs)

12 447-005 1332 34 0.024 34 447-007 1516 1 0.035 1 447-010 158 1532 0.060 114 447-012 11316 114 0.094 112 447-015 11516 1516 0.116 2 447-020 2532 138 0.184 212 447-025 21532 11316 0.368 3 447-030 21516 12932 0.463 4 447-040 318 2132 0.720 6 447-060 434 358 2.349 8 447-080 61332 4 4.074

SCHEDULE

40

FITTINGS

44


Universal Approx. Size Part Number L T Wt. (Lbs)

12 448-005 118 78 0.033 34 448-007 114 1 0.046 1 448-010 1932 1516 0.068 114 448-012 1716 1 0.108 112 448-015 1916 1 0.140 2 448-020 258 1116 0.192

Cap FPT

PVC PART NO. 2117

Plug SPG

PVC PART NO. 2118

Universal Approx. Size Part Number L SPG Wt. (Lbs)

12 449-005 1516 34 0.017 34 449-007 114 1 0.028 1 449-010 138 118 0.047 112 449-015 158 1516 0.102 2 449-020 134 138 0.152

45


Plug MPT

PVC PART NO. 2113

Universal Approx. Size Part Number L T Wt. (Lbs)

12 450-005 1516 34 0.017 34 450-007 1 34 0.028 1 450-010 114 1 0.050 114 450-012 1516 1132 0.074 112 450-015 1516 1132 0.102 2 450-020 11532 1116 0.184

SCHEDULE

40

FITTINGS

HVAC Condensate P Trap(D) SPG x SPG

PVC PART NO. 2700

Universal Approx. Size Part Number A B Wt. (Lbs)

34 489-007 7 34 3 516 0.193

HVAC Condensate Running Trap (D) SPG x SPG

PVC PART NO. 2701

Universal Approx. Size Part Number A Wt. (Lbs)

12 488-005 10516 0.145 34 488-007 1012 0.193

A

B

A

(D) Does not conform to ASTM D 2466.

46

Pipe Data

CTS 12005 12 x 10 04979 12,000 .625 .068 400 PSI 8.3 CTS 12005 12 x 20 04993 24,000 .625 .068 400 PSI 8.3 CTS 12007 34 x 10 04980 6,000 .875 .080 400 PSI 13.9 CTS 12007 34 x 20 05145 12,000 .875 .080 400 PSI 13.9 CTS 12010 1 x 10 05146 3,600 1.125 .102 400 PSI 22.2 CTS 12010 1 x 20 05147 7,200 1.125 .102 400 PSI 22.2 CTS 12012 114 x 10 05148 2,400 1.375 .125 400 PSI 33.3 CTS 12012 114 x 20 05321 4,800 1.375 .125 400 PSI 33.3 CTS 12015 112 x 10 05150 1,440 1.625 .148 400 PSI 46.6 CTS 12015 112 x 20 05306 2,880 1.625 .148 400 PSI 46.6 CTS 12020 2 x 10 05152 960 2.125 .193 400 PSI 79.5 CTS 12020 2 x 20 05322 1,920 2.125 .193 400 PSI 79.5

CPVC Copper Tube Size Pipe


FlowGuard Gold Pipe

STRAIGHT LENGTHS PLAIN END SDR 11 CPVC COPPER TUBE SIZE PIPE ASTM D 2846 MAX WORK WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL PRESSURE 100 FT. 611942- SKID (IN.) (IN.) AT 23C OR 73F (LBS.)

FlowGuard Gold is a registered trademark of The Lubrizol Corporation.

MADE INU.S.A.

NSF Listed. Meets All Requirements of ASTM D 2846.

CTS 12005 12x150 05313 3,750 .625 .068 400 PSI 8.5 CTS 12007 34x100 05314 2,500 .875 .080 400 PSI 14.0 CTS 12010 1x100 10643 1,200 1.125 .102 400 PSI 22.2

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665 COILED PIPE SDR 11 COILED SDR CPVC COPPER TUBE SIZE PIPE ASTM D 2846 MAX WORK WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL PRESSURE 100 FT. 611942- SKID (IN.) (IN.) AT 23C OR 73F (LBS.)

NOTE: STRAIGHT LENGTH PIPE ARE SHIPPED IN FULL BUNDLE QUANTITY ONLY.






47

Pipe Data

CTS 12005 RU 12 x 20 11642 24,000 .625 .068 400 PSI 8.3 CTS 12007 RU 34 x 20 11643 12,000 .875 .080 400 PSI 13.9 CTS 12010 RU 1 x 20 11644 7,200 1.125 .102 400 PSI 22.2 CTS 12015 RU 112 x 20 11645 2,880 1.625 .148 400 PSI 46.6 CTS 12020 RU 2 x 20 11646 1,920 2.125 .193 400 PSI 79.5

CPVC Copper-Tube-Size Pipe for Non-Potable Water Distribution


ReUze Pipe

STRAIGHT LENGTHS PLAIN END SDR 11 CPVC COPPER TUBE SIZE PIPE ASTM D 2846 MIN. MAX WORK WT. PER PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL PRESSURE AT 100 FT. 611942- SKID (IN.) (IN.) 23C OR 73F (LBS.)

ReUze is a registered trademark of Charlotte Pipe and Foundry Company.

MADE INU.S.A.

NSF Listed. Meets All Requirements of ASTM D 2846.

NOTE: STRAIGHT LENGTH PIPE ARE SHIPPED IN FULL BUNDLE QUANTITY ONLY.






REUZE

PIPE

48

12 0.633 (16.08) 0.500 (12.70) 34 0.884 (22.45) 0.700 (17.78) 1 1.135 (28.83) 0.900 (22.86) 114 1.386 (35.20) 1.100 (27.94) 112 1.640 (41.66) 1.300 (33.02) 2 2.141 (54.38) 1.700 (43.18)

12 0.382 (9.70) 0.183 (4.65) 0.102 (2.59) 34 0.507 (12.88) 0.235 (5.97) 0.102 (2.59) 1 0.633 (16.08) 0.287 (7.29) 0.102 (2.59) 114 0.758 (19.25) 0.339 (8.61) 0.102 (2.59) 112 0.884 (22.45) 0.391 (9.93) 0.102 (2.59) 2 1.134 (28.83) 0.495 (12.57) 0.102 (2.59)

NOMINAL G MINIMUM J MINIMUM N MINIMUM SIZE (IN.) IN. (mm) IN. (mm) IN. (mm)

TAPERED SOCKET DIMENSIONS FOR CPVC 41,SDR 11 PLASTIC PIPE FITTINGS

NOMINALSIZE (IN.)

SOCKET ENTRANCE DIAMETER, IN. (mm) SOCKET LENGTH, IN. (mm) A AVERAGE C MINIMUM

MINIMUM DIMENSIONS FROM CENTER TO END OF SOCKET(LAYING LENGTH) FOR CPVC 41, SDR 11 FITTINGS

FlowGuard Gold Fittings

49

FlowGuard Gold CPVC CTS Fittings

FLOWGUARD

GOLD

Coupling S x S

CTS PART NO. 2100

UPC# Approx. Size 611942- L N Wt. (Lbs) 12 04994 118 18 0.016 34 05154 112 18 0.027 1 05155 11516 18 0.050 114 05156 21132 18 0.085 112 05157 21116 18 0.134 2 05158 31732 18 0.300

Coupling S x S

CTS PART NO. 2100

UPC# Approx. Size 611942- L N Wt. (Lbs) 34 x 12 05159 11332 316 0.02 1 x 34 05160 11316 316 0.04 114 x 1(A) 09942 212 916 0.12(A) Assembled

50


Transition Coupling IPS S x CTS S

CTS PART NO. 2100I

UPC# Approx. Size 611942- L N Wt. (Lbs) 34 04996 158 316 0.50 1 05175 218 18 0.07

Reducer Bushing SPG x S

CTS PART NO. 2107

UPC# Approx. Size 611942- L N Wt. (Lbs) 34 x 12 04998 2732 1132 0.010 1 x 12 05177 1132 1732 0.030 1 x 34 05178 1132 516 0.020 114 x 12 05179 114 34 0.050 114 x 34 05180 1732 12 0.060 114 x 1 05181 114 1132 0.040 112 x 12 05182 1716 1516 0.080 112 x 34 05183 1716 2332 0.080 112 x 1 05184 1716 1732 0.083 112 x 114 05185 1716 516 0.050 2 x 12 05186 11316 1516 0.170 2 x 34 05187 11316 1332 0.170 2 x 1 05188 11316 716 0.180 2 x 114 05189 11316 1116 0.160 2 x 112 05190 11316 12 0.150

51


FLOWGUARD

GOLD

Transition Bushing IPS SPG X CTS S

CTS PART NO. 2107I

UPC# Approx. Size 611942- L N Wt. (Lbs) 12 04999 1132 1732 0.01 34 05191 118 1332 0.02 1 05192 1932 38 0.03 114 05193 138 1132 0.06 112 05194 112 316 0.07 2 05195 178 532 0.10

Male Adapter S x MPT

CTS PART NO. 2109**

UPC# Approx. Size 611942- L N Wt. (Lbs) 12 05000 1516 18 0.02 34 05196 158 332 0.04 1 05197 13132 18 0.07 114 05198 21532 14 0.12 112 05199 278 932 0.18 2 05200 358 732 0.34** For cold water applications only. Does not conform to the requirements of

ASTMD2846.

52


Reducing Male Adapter S x MPT

CTS PART NO. 2110**

UPC# Approx. Size 611942- L N Wt. (Lbs) 34 x 12 05252 134 532 0.040

Male Adapter, Street MPT X ALL CPVC-SPIGOT

CTS PART NO. 2111**

UPC# Approx. Size 611942- L N Wt. (Lbs) 12 05001 158 14 0.03

** For cold water applications only. Does not conform to the requirements of ASTMD2846.

53


FLOWGUARD

GOLD

Cap S

CTS PART NO. 2116

UPC# Approx. Size 611942- L S Wt. (Lbs) 12 05002 34 12 0.01 34 05202 1 2332 0.02 1 05203 118 2932 0.04 114 05204 1916 118 0.06 112 05205 12332 1516 0.10 2 05206 2116 12332 0.21


CTS PART NO. 2300

UPC# Approx. Size 611942- H G G1 H1 Wt. (Lbs) 12 04982 78 38 0.025 34 04983 114 916 0.049 1 04984 11732 58 0.073 114 05006 12732 34 0.135 112 05207 2316 78 0.213 2 05208 22732 1532 0.456

54


90 Degree Elbow, Reducing S x S

CTS PART NO. 2300

UPC# Approx. Size 611942- G G1 H H1 Wt. (Lbs) 34 x 12 05209 1332 1732 118 1132 0.037

Drop Ear Elbow All CPVC - S x S

CTS PART NO. 2300D

UPC# Approx. Size 611942- H G Wt. (Lbs) 12 05007 2932 38 0.03

55


FLOWGUARD

GOLD

90 Degree Street Elbow SPG x S

CTS PART NO. 2304

UPC# Approx. Size 611942- H G H1 G1 Wt. (Lbs) 12 05011 1132 1732 78 38 0.03 34 04985 11332 1116 11732 1316 0.05 1 09922 12332 1316 11732 58 0.08


CTS PART NO. 2309

UPC# Approx. Size 611942- H J Wt. (Lbs) 12 05012 1116 316 0.020 34 05228 1516 14 0.039 1 05229 1316 932 0.059 114 05230 1716 1132 0.109 112 05231 11116 38 0.174 2 05232 2316 12 0.373

56


Street Elbow 45 Degree SPG x S

CTS PART NO. 2310

UPC# Approx. Size 611942- H J Wt. (Lbs) 12 05013 1116 316 0.02 34 05233 1516 14 0.03 1 10652 1732 516 0.06

Tee S x S x S

CTS PART NO. 2400

UPC# Approx. Size 611942- L H G Wt. (Lbs) 12 05014 11316 2932 1332 0.032 34 05238 2716 1732 12 0.059 1 05239 3116 11732 58 0.104 114 05240 334 178 2532 0.177 112 05241 438 2316 78 0.286 2 05242 51116 22732 118 0.624

57


FLOWGUARD

GOLD

Reducer Tee S x S x S

CTS PART NO. 2400

UPC# Approx. Size 611942- L H G H1 G1 Wt. (Lbs) 12 x 12 x 34 10685 2116 1132 12 114 1732 0.04 34 x 34 x 12 05243 2716 1732 12 1132 12 0.05 34 x 34 x 1 05019 338 11116 58 11732 58 0.15 34 x 12 x 12 05244 2732 1732 12 1132 12 0.05 34 x 12 x 34 05245 214 1732 12 1732 12 0.06 1x12x12 05020 3732 11732 58 11116 1316 0.17 1 x 12 x 34 05021 3732 11732 58 11116 1316 0.16 1 x 12 x 1 05022 3732 11732 58 11732 58 0.13 1 x 34 x 12 05023 3732 11732 58 11116 3132 0.16 1 x 34 x 34 10598 22532 1716 1732 11132 58 0.08 1 x 34 x 1 05025 23132 11932 1116 1916 2132 0.11 1 x 1 x 12 10599 258 1516 1132 12932 1732 0.08 1 x 1 x 34 05469 21516 11532 916 138 2132 0.09 114 x 1 x 1 05038 378 178 34 2 1332 0.15 114 x 114 x 12 11262 3 112 38 1932 34 0.12 114 x 114 x 34 11192 3316 11932 1532 112 2532 0.13 114 x 114 x 1 11233 312 134 58 11116 2532 0.15 112 x 1 x 1 05056 412 214 1516 21132 112 0.21 112 x 112 x 12 11592 378 11516 58 11132 1316 0.21 112 x 112 x 34 11232 378 11516 58 12132 1516 0.21 112 x 112 x 1 10686 378 11516 58 12332 2532 0.21 2 x 2 x 12 11234 4316 2332 38 158 1332 0.35 2 x 2 x 34 11235 4716 2732 12 178 1532 0.37 2 x 2 x 1 10687 41116 21132 58 13132 1116 0.41 2 x 2 x 112 11236 538 21116 3132 2716 118 0.51

58


Slab Sweep S x SPG

CTS PART NO. 2612

UPC# Approx. Size 611942- L H Wt. (Lbs) 12 10656 29 934 0.25 34 10657 29 1014 0.41

Low-Lead Female Adapter, Brass Threads BRASS FPT X CTS HUB

CTS PART NO. 2105L

UPC# Approx. Size 611942- L T Wt. (Lbs) 12 11632 11116 58 0.17 34 11634 13132 58 0.22 1 11635 2916 58 0.48 114 12404 3116 34 0.88 112 12405 3932 78 1.07 2 12406 31116 3132 1.48

59


FLOWGUARD

GOLD

Low-Lead Male Adapter, Brass Threads BRASS MPT X CTS HUB

CTS PART NO. 2115L

UPC# Approx. Size 611942- L T Wt. (Lbs) 12 11636 178 12 0.17 34 11637 218 12 0.20 1 11638 234 34 0.39 114 12407 3316 2532 0.83 112 12408 312 1316 1.12 2 12409 4132 1316 1.85

Low-Lead CPVC/Brass Drop Ear Elbow 90 Degree BRASS FPT X CPVC HUB

CTS PART NO. 2302L

UPC# Approx. Size 611942- H H1 G G1 Wt. (Lbs) 12 11640 2932 134 1332 1732 0.28

60

Certification

This is to certify that all Plastic Pipe and Fittings manufactured by Charlotte Pipe and Foundry Company are manufactured in the United States and conform to the following standards:

PVC SCH. 40 SOLID WALL PIPEASTMD1784,ASTMD1785,ASTMD2665FHAUM79aFEDERALSPECIFICATIONL-P-320aNSFSTANDARDNO.14AND61

PVC SCH. 40 DWV CELLULAR CORE PIPEASTMD4396,ASTMF891NSFSTANDARDNO.14

RePVC SCH. 40 DWV PIPEASTMD4396,ASTMF1760NSFSTANDARDNO.14

PVC SCH. 40 DWV FITTINGSASTMD1784,ASTMD2665,ASTMD3311,ASTMF1866FHAUM79aFEDERALSPECIFICATIONL-P-320aNSFSTANDARDNO.14

PVC SDR-21 AND SDR-26 PRESSURE PIPEASTMD1784,ASTMD2241NSFSTANDARDNO.14AND61

PVC SCH. 40 PRESSURE FITTINGSASTMD1784,ASTMD2466NSFSTANDARDNO.14AND61

PVC SCH. 40 WELL CASING PIPEASTMD1784,ASTMF480NSFSTANDARDNO.14AND61

PVC SCH. 80 PIPEASTMD1784,ASTMD1785,PVC1120NSFSTANDARDNO.14AND61

PVC SCH. 80 FITTINGSASTMD1784,ASTMD2467,ASTMD2464,ASTMF1970NSFSTANDARDNO.14AND61

61

Certification

CERTIFICATION

PVC SDR 35 SEWER MAIN PIPEASTMD1784,ASTMD3034SDR35ASTMD3212,ASTMF477

PVC SEWER AND DRAIN PIPEASTMD1784,ASTMD2729

PVC THIN WALL PIPE & FITTINGSASTMD1784,ASTMD2949NSFSTANDARDNO.14

CPVC FLOWGUARD GOLD CTS PIPE & FITTINGSASTMD1784,ASTMD2846FHAUM-61aNSFSTANDARDNO.14.AND61CSALISTEDONSPECIFIEDITEMS

CPVC REUZE CTS PIPE ASTMD1784,ASTMD2846NSFSTANDARDNO.14.

CPVC CHEMDRAIN SCH. 40 PIPE & FITTINGSASTMD1784,ASTMF2618NSFSTANDARDNO.14

ABS SCH. 40 DWV CELLULAR CORE PIPEASTMD3965,ASTMF628NSFSTANDARDNO.14

ABS PLUS SCH. 40 DWV CELLULAR CORE PIPEASTMD3965,ASTMD4396,ASTMF1488NSFSTANDARDNO.14.

ABS SCH. 40 DWV FITTINGSASTMD3965,ASTMD2661,ASTMD3311FHAUM79aFEDERALSPECIFICATIONL-P-322bNSFSTANDARDNO.14

62

Charlotte Pipe and Foundry Company(CharlottePipe)ProductsarewarrantedtobefreefrommanufacturingdefectsandtoconformtocurrentlyapplicableASTMstandardsforaperiodoffive(5)yearsfromdateofdelivery.Buyersremedyforbreachofthiswarrantyislimitedtoreplacementof,orcreditfor,thedefectiveproduct.Thiswarrantyexcludesanyexpenseforremovalorreinstallationofanydefectiveproductandanyotherincidental,consequential,orpunitivedamages.This limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe oritsrepresentative,inadditiontoorbeyondthisLimitedWarranty,shallconstituteawarranty.ThisLimitedWarranty may only be modified in writing signed by an officer of Charlotte Pipe.

This Limited Warranty will not apply if:

1) TheProductsareusedforpurposesotherthantheirintendedpurposeasdefinedbylocalplumbingandbuildingcodes,andtheapplicableASTMstandard.

2) TheProductsarenotinstalledingoodandworkmanlikemannerconsistentwithnormalindustrystandards;installedincompliancewiththelatestinstructionspublishedbyCharlottePipeandgoodplumbingpractices;and installed in conformance with all applicable plumbing, fire and building code requirements.

3) ThislimitedwarrantydoesnotapplywhentheproductsofCharlottePipeareusedwiththeproductsofothermanufacturersthatdonotmeettheapplicableASTMorCISPIstandardsorthatarenotmarkedina manner to indicate the entity that manufactured them.

4) TheProductsfailduetodefectsordeficienciesindesign,engineering,orinstallationofthepipingsystemof which they are a part.

5) TheProductshavebeen the subjectofmodification;misuse;misapplication; impropermaintenanceorrepair;damagecausedbythefaultornegligenceofanyoneotherthanCharlottePipe;oranyotheractoreventbeyondthecontrolofCharlottePipe.

6) TheProductsfailduetothefreezingofwaterintheProducts.

7) TheProductsfailduetocontactwithchemicalagents,firestoppingmaterials,threadsealant,plasticizedvinylproducts,orotheraggressivechemicalagentsthatarenotcompatible.

8) Pipe outlets, sound attenuation systems or other devices are permanently attached to the surface ofCharlottePVC,ABSorCPVCproductswithsolventcementoradhesiveglue.

CharlottePipeproductsaremanufacturedtotheapplicableASTMorCISPIstandard.CharlottePipeandFoundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry.

AnyCharlottePipeproductsallegedtobedefectivemust bemadeavailabletoCharlottePipeatthefollowingaddressforverification,inspectionanddeterminationofcause:

Charlotte Pipe and Foundry CompanyAttention:TechnicalServices

2109 Randolph RoadCharlotte, North Carolina 28207

Purchaser must obtain a return materials authorization and instructions for return shipment to Charlotte Pipeofanyproductclaimeddefectiveorshippedinerror.AnyCharlottePipeproductprovedtobedefectiveinmanufacturewillbereplacedF.O.B.pointoforiginaldelivery,orcreditwillbeissued,atthediscretionofCharlotte Pipe.

4/15/10

LIMITED WARRANTY

Charlotte and Charlotte Pipe are registered trademarks of Charlotte Pipe and Foundry Company.






63

CharlottePipeandFoundryCompany (CharlottePipe)warrants to theoriginalownerofthestructure inwhich itsFlowGuardGoldCTSCPVCPipeandFittings (theProducts)havebeeninstalled,thattheProductswillbefreefrommanufacturingdefectsandconformtocurrentlyapplicableASTMstandardsundernormaluseandservice foraperiodof ten(10)years.Buyersremedyforbreachofthiswarrantyislimitedtoreplacementof,orcreditfor,thedefectiveproduct.Thiswarrantyexcludesanyexpenseforremovalorreinstallationofanydefectiveproductandanyotherincidental,consequential,orpunitivedamages.This limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe or its representative,inadditiontoorbeyondthisLimitedWarranty,shallconstituteawarranty.This Limited Warranty may only be modified in writing signed by an officer of Charlotte Pipe.This Limited Warranty will not apply if:1) TheProductsareusedforpurposesotherthanthetransmissionofdomesticwater.

2) TheProductsarenotinstalledingoodandworkmanlikemannerconsistentwithnormalindustry standards; installed in compliancewith the latest instructions published byCharlottePipeandgoodplumbingpractices;andinstalledinconformancewithallapplicableplumbing, fire and building code requirements.

3) ThislimitedwarrantydoesnotapplywhentheproductsofCharlottePipeareusedwiththeproductsofothermanufacturersthatdonotmeettheASTMstandardorthatarenotmarked in a manner to indicate the entity that manufactured them.

4) TheProductsfailduetodefectsordeficienciesindesign,engineering,orinstallationofthewater distribution system of which they are a part.

5) TheProducts have been the subject ofmodification;misuse;misapplication; impropermaintenanceorrepair;damagecausedbythefaultornegligenceofanyoneotherthanCharlottePipe;oranyotheractoreventbeyondthecontrolofCharlottePipe.

6) TheProductsfailduetothefreezingofwaterintheProducts.

7) TheProducts fail due to contactwith chemical agents,fire stoppingmaterials, threadsealant,plasticizedvinylproducts,orotheraggressivechemicalagentsnotcompatiblewith CPVC compounds.

CharlottePipeproductsaremanufacturedtotheapplicableASTMstandard.CharlottePipeand Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry. AnyCharlottePipeproductsallegedtobedefectivemust bemadeavailabletoCharlottePipeatthefollowingaddressforverification,inspectionanddeterminationofcause:

Charlotte Pipe and Foundry CompanyAttention:TechnicalServices

2109 Randolph RoadCharlotte, North Carolina 28207

Purchaser must obtain a return materials authorization and instructions for return shipment toCharlottePipeofanyproductclaimeddefectiveorshippedinerror.

Any Charlotte Pipe product provedtobedefectiveinmanufacturewillbereplacedF.O.B.pointoforiginaldelivery,orcreditwillbeissued,atthediscretionofCharlottePipe.

3/25/10

FlowGuard Gold CPVC CTS Limited Warranty

Charlotte Pipe is a registered trademark of Charlotte Pipe and Foundry Company.FlowGuard Gold is a registered trademark of Lubrizol Corporation.






LIMITED

WARRANTY

PO BOX 35430

CHARLOTTE

NORTH CAROLINA 28235

PHONE (704) 348-6450

(800) 438-6091

FAX (800) 553-1605

LITERATURE BY FAX (800) 745-9382

WWW.CHARLOTTEPIPE.COM

Pressure Pipe Fittings

Documents

Transcript of Pressure Pipe Fittings