Press Brake Tooling
Click here to load reader
-
Upload
elaine-johnson -
Category
Documents
-
view
77 -
download
13
description
Transcript of Press Brake Tooling
EUROPEAN STYLE
PRESS BRAKETOOLING
Your Choice for Higher
Productivity
Strength. Performance. Innovation.
March 2012
Longer tool life, less scrap and quick set-ups are what make the Wilson Tool
European Style Press Brake Tooling the first choice of fabricators worldwide.
Wilson’s unique clamping system, state-of-the-art manufacturing and exclusive
surface enhancement gives you better tooling for your money. We also offer the
world’s largest selection of Quick Change 2V and 1V dies.
WHEN UPTIME IS KEY,CHOOSE
WILSON EUROPEAN.
Change Tools in Seconds.
The Wilson Express Clamping System™ makes set-ups quick and easy. Wilson’s
ingenious system of punch holders allows most tools to be changed in a matter
of seconds. Because the Express Clamping System is designed to use standard
European style press brake tooling with a safety groove there is no need for a
special tooling.
The Strength is in the Steel.
We manufacture each and every press brake tool at our state-of-the-art
manufacturing facility to ensure total quality control and quick delivery.
Precision Ground for Less Scrap.
Wilson European Press Brake Tooling is precision ground to a tolerance of
+/- .0008” (.02mm) on all critical dimensions for increased reliability. Common
centerlines on all punches eliminate costly time spent locating the back gauge
origin position and subsequent scrap.
Hardened Tools Last Longer.
To ensure that you receive the maximum life out of your press brake tooling,
Wilson Tool uses a patented Nitrex® surface enhancement on all dies. Nitrex
provides a surface hardness of HRC-70, which increases long-term durability,
reduces galling and adds lubricity.
INDEXStandard Lengths, Special Ear Piece . . 4Bending Diagrams . . . . . . . . . . . . . .5-6Wilson Express Clamping . . . . . . . . . . 7Standard 880/900 Punches . . . . . . . . . 8Gooseneck Punches . . . . . . . . . . . .9-12880/900 Sash Punches . . . . . . . . . . . 1330° Acute-Angle Punches. . . . . . .14-1560° Acute-Angle Punches. . . . . . . . . 15Large Radius Punches . . . . . . . . . . . 1675° Punches . . . . . . . . . . . . . . .17-18Bend Limit Graphs Standard 880/900 Punch . . . . . . . . . . . . 19 Standard 880/900 Punch w/ Thin Tip . . . . . . 20 Gooseneck Punch . . . . . . . . . . . . . . .21-26 88°/ 90° Narrow Punch . . . . . . . . . . . . 27 88° Sash Punch . . . . . . . . . . . . . . . . . 28 90° Sash Punch . . . . . . . . . . . . . . . . . 29 30° Acute Angle Punch . . . . . . . . . . .30-31 75° Punches. . . . . . . . . . . . . . . . .32-36 Z2 Style Deep Punch Holder . . . . . . . . . . 37Quick Change 75° 2V Dies . . . . . . . . 38Quick Change 88°/ 900 2V Dies . . . . 39Quick Change 88° 2V Dies . . . . . . . 40Quick Change 2V Dies w/Large Shoulder Radii . . . . . . . . . . . . . . . 41Acute Angle Quick Change 2V Dies . . 41Bolt Down 2V Dies (Old Style). . . . . . 422V Dies with Large Shoulder Radii (Old Style) . . . . . . . . . . . . . . . . . . 43Sectionalized 2V Dies (Old Style). .43-45Low Profile Sectionalized 2V Dies (Old Style) . . . . . . . . . . . . . . . . . . 452V Die Rail and Clamp . . . . . . . . . . . 46Stacking Rails . . . . . . . . . . . . . . . . . 46AM to Euro Quick Change 2V Die . . . 462V Die Holders . . . . . . . . . . . . . . . . 46Quick Change 88°/ 900 1V Dies . . . . 47Low Profile Quick Change 88°/ 900 1V Dies. . . . . . . . . . . . . . . . . . . . 4730° Acute Angle Quick Change 1V Dies . . . . . . . . . . . . . . . . . . . 48 Quick Change 75° 1V Dies . . . . . . . . 49Quick Change 1V Die Holder and Wedge Block . . . . . . . . . . . . . . . . 50Acute Angle 30° . . . . . . . . . . . . . . . 51 Large 45°, 85°, 80° 1V Dies . . . .51-544 Way Die . . . . . . . . . . . . . . . . . . . 54Rail Style Offset Tools . . . . . . . . . . . 55 Quick Change Rail-Style Flattening Dies . . . . . . . . . . . . . . . . . . . . . . 56 30° 3V Hemming Die. . . . . . . . . . . . 56 Flattening Dies and Punches . . . . .56-57Hemming Dies. . . . . . . . . . . . . . .58-59 Accessories . . . . . . . . . . . . . . . . . . 60 Urethane Holders & Pads . . . . . . . . . 61 Urethane Products. . . . . . . . . . . . . . 62 Z1/Z2 Narrow Punch Holders . . . .63-64 Stacking Punch Holder . . . . . . . . . . . 65Dual Clamping Kits . . . . . . . . . . . . . 65European Punch & Die Holder . . . . . . 66Tooling Cabinet . . . . . . . . . . . . . . . . 67Urethane Rolls. . . . . . . . . . . . . . . . . 67Measuring Devices. . . . . . . . . . . . . . 67Air Bending Force Charts . . . . . . .68-69
SAVE TIME AND MONEY WITH THEWILSON EXPRESS CLAMPING SYSTEM.TM
Amada® Z2 Style Press Brakes
American Press Brakes
Amada® Z1 and most European (Promecam®)
Style Press Brakes
Trumpf® Press Brakes
Available for virtually any make and model of press brake, the Wilson Express
Clamping System is uniquely designed to increase your productivity and reduce your
operating costs.
Load Punches in a Snap.Loading punches has never been easier. The Wilson Express Clamping system
completely eliminates the need to slide punches in from the end of the machine.
Simply place 16.34” (415mm) long punches or individual pieces of sectionalized
punches under the clamps and push them upward. The spring-loaded clamps
capture the punch via safety groove and hold it in place until the clamps are locked.
To lock the clamps, simply push the removable lever upward.
Unload Punches Quickly and Easily.Again, Wilson has eliminated the need to slide punches to the end of the machine.
Simply pull down the locking lever to unlock the clamp. Or, to remove smaller punch
sections, pushing inward on the tops of the clamps opens the clamps and allows
the operator to pull individual sections straight down. Clamps that are not in use
can easily be removed from the punch holders by hand.
No Special Tooling Required.Wilson Express Clamping Systems can be used with any standard European
(Promecam®) style press brake tooling with a safety groove. You can use the same
high quality Wilson tooling you currently own, without having to repurchase the
system for every tool you order.
Fewer Maintenance Costs.Because the Wilson Express Clamping System is mechanical rather than hydraulic,
maintenance costs are virtually eliminated. And with no hydraulics there’s no risk of
power failures causing clamps to release unexpectedly.
Dual Clamping Available.A dual clamping feature is available on all Wilson Express Clamping Systems for an
additional cost. This added feature allows you to load punches with the safety
groove facing forward or to the rear of the machine. Both front and rear clamps
are opened and closed simultaneously when the locking lever is actuated.
For a free demonstration, or for more information on the Express Clamping
System™, please contact your local Wilson Tool International® sales engineer or
our application sales desk at 800.445.4518.
4Standard Punch LengthS
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
16.339[ 415 ](ST)
[ 835 ]32.875(LT)
[ 835 ]32.875(XT)
1. MOST TOOLS CAN BE EASILY LOADED BY A SINGLE OPERATOR.
2. EASY TO STORE.3. ALL SECTIONALIZED TOOLS COME PRE-CUT IN
NINE DIFFERENT PIECES.4. MOST SECTIONALIZED PUNCHES INCLUDE TWO
EAR PIECES (HORNS).5. SPECIAL TOOLING AvAILABLE. PLEASE
CONTACT THE APPLICATION SALES DESk.
SECTION WIDTHS:3.937" (100mm) LEFT EAR / 3.937" (100mm) RIGHT EAR / .394" (10mm) / .591" (15mm) / .787" (20mm) / 1.575" (40mm) / 1.969" (50mm) / 7.874" (200mm) / 11.811" (300mm)
FEATURES:1. MOST TOOLS CAN BE EASILY LOADED BY A
SINGLE OPERATOR.2. EASY TO STORE.3. ALL SECTIONALIZED TOOLS COME PRE-CUT IN
NINE DIFFERENT PIECES.4. NITREX™ (HRC-70) IS STANDARD ON EvERY DIE
IN THE TOOLING LINE.5. SPECIAL TOOLING AvAILABLE. PLEASE
CONTACT THE APPLICATION SALES DESk.
SECTION WIDTHS:3.937" (100mm) / 3.937" (100mm) / .394" (10mm) / .591" (15mm) / .787" (20mm) / 1.575" (40mm) / 1.969" (50mm) / 7.874" (200mm) / 11.811" (300mm)
Note: Special lengths are available at additional cost.
Note: Special lengths are available at additional cost.
16.339[ 415 ](ST)
[ 835 ]32.875(LT)
[ 835 ]32.875(XT)
Standard dIe LengthS
SPecIaL ear PIece
When ordering a special ear section from Wilson Tool, please indicate the following dimensions.
“C”
“W”
“A”
R.375
“B”
LARGE RADIUS PUNCHESPAGE
LARGE 1V DIESPAGE
1300
LARGE RADIUS PUNCHESPAGE
URETHANE PADSPAGE
URETHANE HOLDERSPAGE
1500
5.118[ 130 ]
STANDARD PUNCHESPAGE
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
100
GOOSENECK PUNCHESWITH THIN TIPPAGE
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
400
DEEP GOOSENECK PUNCHESPAGE
2V DIESPAGE
2V DIE HOLDERSPAGE
300
these are the right size
EXTRA PARTS
5.118[ 130 ]
NARROW 1V DIEHOLDERSPAGE
NARROW 1V DIESPAGE
SASH PUNCHESPAGE
600
LARGE 1V DIESPAGE
LARGE RADIUS PUNCHESPAGE
1200
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
NARROW PUNCHESPAGE
500
STANDARD PUNCHESWITH THIN TIPPAGE
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
200
STANDARD PUNCHESPAGE 8
STANDARD PUNCHESWITH THIN TIPPAGE 8
NARROW PUNCHESPAGE 12
QUICk CHANGE 2v DIESPAGE 38-41
QUICk CHANGE 2v DIESPAGE 38-41
QUICk CHANGE 2v DIESPAGE 38-41
QUICk CHANGE 2v DIESPAGE 38-41
2v DIE HOLDERSPAGE 46
2v DIE RAILPAGE 46
2v DIE HOLDERS PAGE 46
2v DIE RAIL PAGE 46
2v DIE HOLDERSPAGE 46
2v DIE RAILPAGE 46
LARGE RADIUS PUNCHESPAGE 16
LARGE RADIUS PUNCHESPAGE 16
LARGE RADIUS PUNCHESPAGE 16
LARGE 1v DIESPAGE 51-54
LARGE 1v DIESPAGE 51-54
URETHANE PADSPAGE 61
2v DIE HOLDERSPAGE 46
2v DIE RAILPAGE 46
SASH PUNCHESPAGE 13
GOOSENECk PUNCHESWITH THIN TIPPAGE 10
QUICk CHANGE 1v DIESPAGE 47-50
QUICk CHANGE 1v DIE HOLDERSPAGE 50
URETHANE HOLDERSPAGE 61
2v DIESPAGE 42-45
GOOSENECk PUNCHESPAGE 9
2v DIE HOLDERSPAGE 46
90 DEGREE BENDING(27 GA - 10 GA)
90 DEGREE BENDING WITHTHIN TIP GOOSENECK PUNCH
90 DEGREE BENDING WITH GOOSENECK PUNCH
90 DEGREE BENDING(SASH)
LARGERADIUS BENDING
90 DEGREE BENDINGWITH NARROW PUNCH
90 DEGREE BENDINGWITH THIN TIP PUNCH
90 DEGREE BENDING(3/8" - 1/2")
3V HEMMING DIESPAGE
FLATTENING PUNCHESPAGE
1000
FLATTENING PUNCHESPAGE
FLATTENING DIESPAGE
1100
OFFSET TOOLSPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
1800
HEMMING(27 GA - 16 GA)
HEMMING(27 GA - 11 GA)
OFFSET BENDING(27 GA - 16 GA)
FLATTENING PUNCHESPAGE 57
FLATTENING PUNCHESPAGE 57
RAIL STYLE OFFSET TOOLSPAGE 55
2v DIE HOLDERSPAGE 46
2v DIE RAILPAGE 46
FLATTENING DIESPAGE 56
3v HEMMING DIESPAGE 56
ACUTE ANGLE PUNCHESPAGE
ACUTE ANGLE LARGE1V DIESPAGE
1400
ACUTE ANGLE PUNCHESPAGE
ACUTE ANGLE QUICKCHANGE 2V DIESPAGE
2V DIE RAILSPAGE
2V DIE HOLDERSPAGE
700
STANDARD PUNCH HOLDER(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERSPAGE
STACKING PUNCH HOLDEROR NARROW PUNCH HOLDERSPAGE
STANDARD PUNCHESPAGE
LOW PROFILE NARROW1V DIESPAGE
NARROW 1V DIE HOLDERSPAGE
1900
DEEP PUNCH HOLDERPAGE
STANDARD PUNCHESPAGE
1600
these are the right size
EXTRA PARTS
5.118[ 130 ]
ACUTE ANGLE PUNCHESPAGE
LARGE 1V DIESPAGE
900
ACUTE ANGLE PUNCHESPAGE
HEMMING DIES
STEP 1
PAGE
STEP 2
800
ACUTE-ANGLE BENDING(12 GA - 6 GA)
ACUTE-ANGLE BENDING(27 GA - 14 GA) DEEP BOX BENDING DEEP PUNCH HOLDER
90 DEGREE BENDING(9 GA - 3/8")
HEMMING (2 STAGE)(27 GA - 14 GA)
ACUTE ANGLE PUNCHESPAGE 14-15 ACUTE ANGLE
PUNCHESPAGE 14-15
ACUTE ANGLE PUNCHES PAGE 14-15
STEP 1
STEP 2
HEMMING DIESPAGE 58-59LARGE
1v DIESPAGE 51-54
DEEP PUNCH HOLDERPAGE 64STANDARD PUNCH HOLDER
(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERS PAGE 63
STANDARD PUNCHESPAGE 8
LOW PROFILE QUICk CHANGE 1v DIES PAGE 47
QUICk CHANGE 1v DIE HOLDERS PAGE 50
STANDARD PUNCHESPAGE 8
ACUTE ANGLE LARGE 1v DIESPAGE 51
ACUTE ANGLE PUNCHESPAGE 14-15
ACUTE ANGLE QUICkCHANGE 2v DIEPAGE 41
2v DIE RAILPAGE 42-45
2v DIE HOLDERSPAGE 46
STACkING PUNCH HOLDER PAGE 65
NARROW PUNCH HOLDER PAGE 63
7 WILSon exPreSS cLamPIng SyStem™
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
*Note: Other Punch Holders Shown On Pages 63-66
Z2 Series With Wedge HEIGHT PRICE
43818I-2 2 Front Clamp Plates 120mm
43818I 2 Front & 2 Back Clamp Plates 120mm
Conventional Press Brakes With Wedge HEIGHT PRICE
43815-2 2 Front Clamp Plates 100mm
43815 2 Front & 2 Back Clamp Plates 100mm
Z1 Series With Wedge HEIGHT PRICE
43817I-2 2 Front Clamp Plates 100mm
43817I 2 Front & 2 Back Clamp Plates 100mm
Trumpf Press Brakes With Wedge HEIGHT PRICE
43819-2 2 Front Clamp Plates 100mm
43819 2 Front & 2 Back Clamp Plates 100mm
Mitsubishi Toyokoki HEIGHT PRICE
43031HYB Series Press Brakes Dual Clamping
Included70mm
Mitsubishi Toyokoki HEIGHT PRICE
43033APB Series Press Brakes Dual
Clamping Included70mm
exPreSS cLamP torque Wrench KIt
CAT. No.
0800208003437260679306795
COMPONENT
Complete kitCasePivot
WrenchHex Tip
PRICE
8Standard 88˚ & 90˚ PuncheS
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
R .354[ 9 ]
R .197[ R 5 ]
.394[ 10 ]
1.378[ 35 ]
1.181[ 30 ]
"H"
1.378[ 35 ]
Part No. 40002
(Ear Pirce)
A
(Ear Piece)
Part No. 40212
"H"
R.158
[ 4.02 ]
.394[ 10 ].197
[ 5 ]
R .197[ R 5 ]
.394[ 10 ]
(Ear Piece)
1.181[ 30 ]
A
(Ear Piece)
Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
Part No. 40212
"H"
R.158
[ 4.02 ]
.394[ 10 ].197
[ 5 ]
R .197[ R 5 ]
.394[ 10 ]
(Ear Piece)
1.101[ 27.97]
A
R .354[ 9 ]
R .197[ R 5 ]
.394[ 10 ]
1.378[ 35 ]
1.101[ 27.97]
"H"
1.378[ 35 ]
Part No. 40002
(Ear Pirce)
A
Standard 88˚ & 90˚ PuncheS With thin tiP
Bend Limit Graph - Page 20
CAT. No.MAX. TON
FT / METER(LT & ST)
40002400084001540023400304010240108401154012340130
.008
.030
.060
.090
.120
.008
.030
.060
.090
.120
[0.2][0.8][1.5][2.3][3.0][0.2][0.8][1.5][2.3][3.0]
30 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 100
2.634 [66.9]2.624 [66.6]2.612 [66.3]2.598 [66.0]2.586 [65.7]2.634 [66.9]2.624 [66.7]2.613 [66.4]2.600 [66.0]2.588 [65.7]
14 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 47
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
88˚88˚88˚88˚88˚90˚90˚90˚90˚90˚
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.MAX. TON
FT / METER(LT & ST)
4021240202
.008
.008[0.2][0.2]
6 / 206 / 20
2.634 [66.9]2.634 [66.6]
3 / 103 / 10
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
88˚90˚
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
Part No. 40402
"H"
.354[ 9 ]
R
1.378[ 35 ]
1.378[ 35 ]
R .197[ R 5 ]
.394 (Ear Piece)[ 10 ]
these are the right size
1.181[ 30 ]
A(Ear Piece)
.354[ 9 ]
.394[ 10 ]
R .197[ R 5 ]
1.378[ 35 ]
1.378[ 35 ]
Part
No.
403
02
(Ear Piece)R
"H"
1.181[ 30 ]
A(Ear Piece)
.354[ 9 ]
.394[ 10 ]
R .197[ R 5 ]
1.378[ 35 ]
1.378[ 35 ]
Part
No.
403
02
(Ear Piece)R
"H"
1.101[ 27.97]
A
Part No. 40402
"H"
.354[ 9 ]
R
1.378[ 35 ]
1.378[ 35 ]
R .197[ R 5 ]
.394 (Ear Piece)[ 10 ]
these are the right size
1.101[ 27.97]
A
9 88˚ GooSeneck PuncheS
88˚ & 90˚ GooSeneck PuncheSBend Limit Graph - Page 21
Bend Limit Graph - Page 22
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.MAX. TON
FT / METER(LT, ST & XT)
4030240308
.008
.030[0.2][0.8]
15 / 5015 / 50
4.721 [119.9]4.711 [119.7]
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
88˚88˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.MAX. TON
FT / METER(LT & ST)
4040240408404154043040502
.008
.030
.060
.120
.008
[0.2][0.8][1.5][3.0][0.2]
15 / 5015 / 5015 / 5015 / 5015 / 50
4.130 [104.9]4.120 [104.6] 4.108 [104.3]4.082 [103.7] 4.130 [104.9]
14 / 47 14 / 47 14 / 47 14 / 47 14 / 47
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
88˚88˚ 88˚ 88˚ 90˚
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
"H"
.354[ 9 ]
R
1.378[ 35 ]
1.378[ 35 ]
R .197[ R 5 ]
.394[ 10 ]
WT-40602
1.181[ 30 ]
A
(Ear Piece)
.984[ 25 ]
.394[ 10 ]
R .394[ R 10 ]
1.181[ 30 ]
"H"
R.236[ 6 ]
WT-40702
1.181[ 30 ]
A
(Ear Piece)
.984[ 25 ]
.394[ 10 ]
R .394[ R 10 ]
1.181[ 30 ]
"H"
R.236[ 6 ]
WT-40702
1.101[ 27.97]
A
"H"
.354[ 9 ]
R
1.378[ 35 ]
1.378[ 35 ]
R .197[ R 5 ]
.394[ 10 ]
WT-40602
1.101[ 27.97]
A
Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
1088˚ GooSeneck PuncheS
88˚ & 90˚ GooSeneck PuncheS With thin tiPBend Limit Graph - Page 23
Bend Limit Graph - Page 24
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.MAX. TON
FT / METER(LT & ST)
40602406084061540630
[0.2][0.8][1.5][3.0]
21 / 7021 / 7021 / 70 21 / 70
3.539 [89.9]3.529 [89.6] 3.517 [89.3]3.491 [88.7]
14 / 47 14 / 47 14 / 47 14 / 47
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
88˚88˚ 88˚ 88˚
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.MAX. TON
FT / METER(LT & ST)
40702407084071240718
.008
.030
.008
.030
[0.2][0.8][0.2][0.8]
15 / 50 15 / 50 15 / 50 15 / 50
3.539 [89.9]3.529 [89.6] 3.539 [89.9]3.530 [89.7]
9 / 30 9 / 30 9 / 30 9 / 30
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
88˚88˚ 90˚ 90˚
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
.008
.030
.060
.120
11 85˚- 90˚ Z2 Style GooSeneck Punch
.787 [20]
9.568 [243]THEO. SHARP
.751 [19.1]
R
A
.925 - .950[23.5 - 24.1]
Reference only,Varies by angleand radius.
1.101[ 27.97]
Bend Limit Graph - Page 25
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
Note: This punch mounts to Z2 upper beam. Please call sales desk for further explanation.
Cat. No. AAngle
RTip Radius
Max. TonFt/Meter
(ST)
PRICE(ST)
43080c 85˚- 90˚ .008 - .7 [0.2 - 17.75] 25 / 83
1285˚ GooSeneck PuncheS
*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
"H"
.590[ 15 ]R .394
[ 10 ]
R .197 [ R 5 ]
1.378[ 35 ]
1.378[ 35 ]
44540
EAR PIECE
1.181[ 30 ]
A
(Ear Piece)
"H"
.590[ 15 ]R .394
[ 10 ]
R .197 [ R 5 ]
1.378[ 35 ]
1.378[ 35 ]
44540
EAR PIECE
1.101[ 27.97]
A
2.756[ 70 ] .236
[ 6 ]
"H"
R
WT-40902
1.101[ 27.97]
A
Bend Limit Graph - Page 26
Bend Limit Graph - Page 27
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
88˚ & 90˚ narroW PuncheS
CAT. No.MAX. TON
FT / METER(LT & ST)
4454044560
.188
.250[4.8][6.4]
30 / 10030 / 100
4.134 [105.0]4.105 [104.3]
14 / 4714 / 47
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
85°85°
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.MAX. TON
FT / METER(LT, ST & XT)
4080240902
.008
.008[0.2][0.2]
15 / 5015 / 50
3.740 [95.0]3.740 [95.0]
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
88˚90˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
R .394[ R 10 ]
.984[ 25 ]
.394[ 10 ]
.394[ 10 ]
"H"
.315[ 8 ]
R.788[ 20 ]
WT-41002
1.181[ 30 ]
A
13 88˚ SaSh PuncheS
Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
R .394[ R 10 ]
.984[ 25 ]
.394[ 10 ]
.394[ 10 ]
"H"
.315[ 8 ]
R.788[ 20 ]
WT-41002
1.101[ 27.97 ]
A
.394[ 10 ]
"H"
.315[ 8 ]
R
.984[ 25 ]
R .394[ R 10 ]
.394[ 10 ]
.788[ 20 ]
WT-41202
1.101[ 27.97 ]
A(Ear Piece)
Bend Limit Graph - Page 28
Bend Limit Graph - Page 29
88˚ & 90˚ SaSh PuncheS
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.A
ANGLE
R TIP RADIUS
INCHES [mm]
H HEIGHT INCHES
[mm]
MAX. TON FT / METER (LT, ST & XT)
LT 32.87"
(835mm)
ST 16.34"
(415mm)
XT 32.87"
(835mm)
41002 88˚ .008 [0.2] 3.993 [99.0] 10/30
CAT. No.A
ANGLE
R TIP RADIUS
INCHES [mm]
H HEIGHT INCHES
[mm]
MAX. TON FT / METER (LT, ST & XT)
LT 32.87"
(835mm)
ST 16.34"
(415mm)
XT 32.87"
(835mm)
41102 88˚ .008 [0.2] 2.752 [69.9] 10/3041202 90˚ .008 [0.2] 2.752 [69.9] 10/30
1430˚ acute-anGle PuncheS
"H"
R
.788[ 20 ]
R .315[ R 8 ]
.472[ 12 ]
.709[ 18 ]
WT-41308
1.101[ 27.97 ]
A
"H".788[ 20 ]
R .315[ R 8 ]
.472[ 12 ]
.788[ 20 ]
41908
R .709[ 18 ](Ear Piece)
1.101[ 27.97]
A
(Ear Piece)
*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
Bend Limit Graph - Page 30
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.MAX. TON
FT / METER(LT & ST)
41908 .030 [0.8] 30 / 1004.095 [104.0] 6 / 20
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
30˚
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.MAX. TON
FT / METER(LT, ST & XT)
4131541330
.060
.120[1.5][3.0]
30 / 10030 / 100
4.016 [102.0] 3.846 [97.7]
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
30˚30˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
15 30˚ acute-anGle PuncheS
60˚ acute-anGle PuncheS
*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
Part No. 42610
"H"
.718[ 18.24 ]
R
1.101[ 27.97 ]
A
"H"
R
WT-41440
1.101[ 27.97 ]
A
Bend Limit Graph - Page 31
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.MAX. TON
FT / METER(L, S & X)
4144041460
.188
.236[4.8][6.0]
30 / 10030 / 100
2.607 [66.2]2.559 [65.0]
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
60˚60˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.MAX. TON
FT / METER(L, S & X)
42610 .030 [0.8] 30 / 1002.579 [65.5]
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
30˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
16Large radIuS PuncheS
"H"
R .875[ R 22.2 ]
WT-41722
1.101[ 27.97 ]
"H"
R 1.000[ R 25.4 ]
WT-41725
1.101[ 27.97 ]
*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Additional radii available, please contact our application sales desk.
"H"
R .375 [ R 9.5 ]
WT-41709
1.101[ 27.97 ]
"H"
R .500 [ R 12.7 ]
WT-41712
1.101[ 27.97 ]
"H"
R .625[ R 15.9 ]
WT-41715
1.101[ 27.97 ]
"H"
R .750[ R 19 ]
WT-41719
1.101[ 27.97 ]
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
41709
41719
41712
41722
41715
41725
CAT. No.ST
16.34” (415mm)
41709417124171541719 4172241725
HHEIGHT
INCHES [mm]
MAX. TONFT / METER
(L, S & X)
LT32.87”
(835mm)
3.268 [83.0]3.504 [89.0] 3.425 [87.0]3.583 [91.0] 3.701 [94.0]3.780 [96.0]
XT 32.87"
(835mm)
30 / 10030 / 10030 / 10030 / 10030 / 10030 / 100
17 75˚ PuncheS
R .197[ R 5 ]
1.378[ 35 ]
"H"
.377[ 9.6 ]
R
1.378[ 35 ]
.394[ 10 ]
44000
1.181[ 30 ]
A
(Ear Piece)
1.378[ 35 ]
.394[ 10 ]
1.378[ 35 ]
R .197[ R 5 ]
R
"H"
.394[ 10 ]
44030
1.181[ 30 ]
A
(Ear Piece)
*Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
R .197[ R 5 ]
1.378[ 35 ]
"H"
.377[ 9.6 ]
R
1.378[ 35 ]
.394[ 10 ]
44000
1.101[ 27.97]
A
1.378[ 35 ]
.394[ 10 ]
1.378[ 35 ]
R .197[ R 5 ]
R
"H"
.394[ 10 ]
44030
1.101[ 27.97 ]
A
Bend Limit Graph - Page 32
Bend Limit Graph - Page 33
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.MAX. TON
FT / METER(LT & ST)
440004400144003
.030
.060
.120
[0.8][1.5][3.0]
30 / 10030 / 10030 / 100
2.662 [67.6] 2.645 [67.2] 2.607 [66.2]
14 / 4714 / 4714 / 47
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
75° 75° 75°
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.MAX. TON
FT / METER(LT, ST & XT)
440304403144033
.030
.060
.120
[0.8][1.5][3.0]
15 / 50 15 / 50 15 / 50
4.724 [120.0]4.707 [119.5]4.669 [118.6]
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
75° 75° 75°
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
1.378[ 35 ]
.394[ 10 ]
1.378[ 35 ]
R .197[ R 5 ]
R
"H"
.394[ 10 ]
44020
1.181[ 30 ]
A(Ear Piece)
(Ear Piece)
*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost (44010). Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.
1.378[ 35 ]
.394[ 10 ]
1.378[ 35 ]
R .197[ R 5 ]
R
"H"
.394[ 10 ]
44020
1.101[ 27.97 ]
A
R
"H"
.187[ 4.8 ]
44010
1.101[ 27.97 ]
A
.394[ 10 ]
"H"
1.101[ 27.97 ]
.394[ 10 ]
A
1875˚ PuncheS
4401044040
Bend Limit Graph - Page 32 Bend Limit Graph - Page 34
Bend Limit Graphs - Page 35-36
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.MAX. TON
FT / METER(LT & ST)
44020 .030 [0.8] 21 / 703.543 [90.0] 14 / 47
AANGLE
RTIP RADIUS
INCHES [mm]
HHEIGHT
INCHES [mm]
75˚
MAX. TONFT / METER
(XT)
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
CAT. No.A
ANGLE
R TIP RADIUS
INCHES [mm]
H HEIGHT
INCHES [mm]
MAX. TON FT / METER
(LT & ST)
MAX. TON FT / METER
(XT)
LT 32.87"
(835mm)
ST 16.34"
(415mm)
XT 32.87"
(835mm)
44010 75˚ .030 [0.8] 3.740 [95.0] 15/50 15/5044040 75˚ .030 [0.8] 6.299 [160.0] 15/50 14/47
“B”( T.S. ).394
[ 10 ]
1.378[ 35 ]R .197
[ R 5 ]
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
W
W
L
40002SLS
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
19 Bend LImIt graPhSTANDARD 88° & 90° PUNCHES
Product Details - Page 8
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88 90
CAT. No.
40002 40102
40008 40108
40015 40115
40030 40130
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
W
L
W
40202SLS
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
20Bend LImIt graPhSTANDARD 88° & 90° PUNCHES WITH THIN TIP
Product Details - Page 8
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88 90
CAT. No. 40212 40202
1
2
3
5
6
7
8
1 2 3 4 5 6 7
L
4
L
W
W
40302SLS
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
21 Bend LImIt graPh88° GOOSENECK PUNCH
Product Details - Page 9
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88
CAT. No.40302
40308
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
L
W
W
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
40402SLS
22Bend LImIt graPh88° & 90° GOOSENECK PUNCHES
Product Details - Page 9
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88 90
CAT. No.
40402 40502
40408
40415
40430
1
2
3
5
6
7
8
1 2 3 4 5 6 7
L
W
L
W
WT-40602.08.15.30.PB
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
4
23 Bend LImIt graPh88° GOOSENECK PUNCH
Product Details - Page 10
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88
CAT. No.
40602
40608
40615
40630
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
W
L
W
WT-40702.40708.PB
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
24Bend LImIt graPh88° & 90° GOOSENECK PUNCHES WITH THIN TIP
Product Details - Page 10
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88 90
CAT. No.40702 40712
40708 40718
L
W
L
W
25 Bend LImIt graPh85° - 90° Z2 STYLE GOOSENECK PUNCH
Product Details - Page 11
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 85-90
CAT. No. 43080
26Bend LImIt graPh85° GOOSENECK PUNCH
W
L
W
WT-44540.44560.PB GRAPH
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
1
2
3
5
6
7
8
1 2 3 4 5 6 7
L
4
Product Details - Page 12
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 85
CAT. No.44540
44560
27 Bend LImIt graPh88° & 90° NARROW PUNCHES
Product Details - Page 12
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
W
L
W
WT-40802.40902.PB
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88 90
CAT. No. 40802 40902
28Bend LImIt graPh88° SASH PUNCH
1
2
3
5
6
7
8
1 2 3 4 5 6 7
L
W
L
W
WT-41002.PB
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
4
Product Details - Page 13
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88
CAT. No. 41002
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
W
L
W
WT-41102. 41202.PB
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
Product Details - Page 13
29 Bend LImIt graPh90° SASH PUNCH
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 88 90
CAT. No. 41102 41202
1
2
3
5
6
7
8
1 2 3 4 5 6 7
L
4
L
W
W
41908SLS
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
30Bend LImIt graPh30° ACUTE ANGLE PUNCH
Product Details - Page 14
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 30
CAT. No. 41908
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
L
W
W
42610SLS
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
31 Bend LImIt graPh30° ACUTE ANGLE PUNCH
Product Details - Page 15
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 30
CAT. No. 42610
1
2
3
5
6
7
8
1 2 3 4 5 6 7
L
4
L
W
W
44000
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
32Bend LImIt graPh75° STANDARD PUNCH
Product Details - Page 17
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 75
CAT. No.
44000
44001
43001
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
L
W
W
44030
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
33 Bend LImIt graPh75° GOOSENECK PUNCH
Product Details - Page 17
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 75
CAT. No.
44030
44031
43033
1
2
3
5
6
7
8
1 2 3 4 5 6 7
L
4
L
W
W
44020
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
34Bend LImIt graPh75° GOOSENECK PUNCH
Product Details - Page 18
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 75
CAT. No. 44020
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
L
W
W
44010
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
35 Bend LImIt graPh75° NARROW PUNCH
Product Details - Page 18
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 75
CAT. No. 44010
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7
L
L
W
W
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
36Bend LImIt graPh75° GOOSENECK PUNCH
Product Details - Page 18
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
ANGLE 75
CAT. No. 44040
3737 Bend LImIt graPh
ToLL FrEE MExiCoTel: 001-800-741-2510Fax: 001-800-544-2096
WEbSiTE & [email protected]
CATALOG NO.43002
1
2
3
4
5
6
7
9
8
1 2 3 4 5 6 7 8 9
L
W
L
W
37
Z2 STYLE DEEP PUNCH HOLDER
Product Details - Page 64
CAT. No. 43002
38Quick chanGe 75° 2V dieS
1.811[ 46 ]
.630[ 16 ]
.442[ 11.2 ]
.394[ 10 ]
.304[ 7.7 ]
.593[ 15.1 ]
.512[ 13 ]
1.770 [ 45 ]
.256[ 6.5 ]
R .098[ R 2.5 ]
.512[ 13 ]
R .138[ R 3.5 ]
44100
1.811[ 46 ]
.787[ 20 ]
.530[ 13.5 ]
.236[ 6 ]
.206[ 5.2 ]
.593[ 15.1 ]
.512[ 13 ]
1.760 [ 44.7 ]
.256[ 6.5 ]
R .059[ R 1.5 ]
.512[ 13 ]
R .157[ R 4 ]
44101
1.811[ 46 ]
.866[ 22 ]
.580[ 14.7 ]
.394[ 10 ]
.304[ 7.7 ]
.593[ 15.1 ]
.512[ 13 ]
1.908 [ 48.5 ]
.256[ 6.5 ]
R .098[ R 2.5 ]
.512[ 13 ]
R .177[ R 4.5 ]
44102
1.811[ 46 ]
.984[ 25 ]
.658[ 16.7 ]
.472[ 12 ]
.354[ 9 ]
.593[ 15.1 ]
.512[ 13 ]
2.035 [ 51.7 ]
.256[ 6.5 ]
[ R 3 ]
.512[ 13 ]
R .216[ R 5.5 ]
44103
R .118
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 2v dies provides HRC-70.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
44100
44102
44101
44103
CAT. No. V2INCHES [mm]
44100441014410244103
.630 [16.0]
.787 [20.0]
.866 [22.0]
.984 [25.0]
.394 [10.0]
.236 [6.0]
.394 [10.0]
.472 [12.0]
ANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
75˚75˚ 75˚ 75˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
30 / 10030 / 10030 / 10030 / 100
39 Quick chanGe 88˚ & 90˚ 2V dieS
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 2v dies provides HRC-70.
R .016[ R 0.4 ]
1.358[ 34.5 ]
.593[ 15.05 ].256
[ 6.5 ]
.512[ 13 ]
.512[ 13 ]
1.811[ 46 ]
.276[ 7 ]
.158[ 4 ]
.138[ 3.5 ]
.197[ 5 ]
( 4 )
.256[ 6.5 ]
1.811[ 46 ] .512
[ 13 ].512[ 13 ]
R. 016[ R 0.4 ]
R .024[ R 0.6 ]
1.457[ 37 ]
.593[ 15.05 ]
.394[ 10 ]
.236[ 6 ]
.177[ 4.5 ]
.256[ 6.5 ]
( 2 ) ( 2 )
1.811[ 46 ]
R .031[ R 0.8 ]
.512[ 13 ]
.256[ 6.5 ]
1.536[ 39 ]
.295[ 7.5 ]
.472[ 12 ]
.315[ 8 ]
.217[ 5.5 ]
.512[ 13 ]
.593[ 15.05 ]
R .019[ R 0.5 ]
( 2 ) ( 2 ) 1.811[ 46 ]
R .019[ R 0.5 ]
.512[ 13 ]
1.772[ 45 ]
.709[ 18 ]
.413[ 10.5 ]
.335[ 8.5 ]
.551[ 14 ]
.593[ 15.05 ]
.256[ 6.5 ]
.512[ 13 ]
( 4 )
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No. V2INCHES [mm]
420004200842001420024200942003
.276 [7.0]
.276 [7.0] .394 [10.0] .472 [12.0] .472 [12.0] .709 [18.0]
.158 [4.0]
.158 [4.0]
.236 [6.0]
.315 [8.0]
.315 [8.0]
.551 [14.0]
ANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
90˚88˚ 90˚ 90˚88˚90˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
18 / 6018 / 6021 / 7024 / 8024 / 8030 / 100
42001
42003
42008, 42000 88˚ 90˚
42009, 42002 88˚ 90˚
40Quick chanGe 88˚ 2V dieS
1.811[ 46 ]
.512[ 13 ]
.512[ 13 ]
1.772[ 45 ]
.413[ 10.5 ]
.709[ 18 ]
.551[ 14 ]
.335[ 8.5 ]
.256[ 6.5 ]
R .019[ R 0.5 ]
.593[ 15.05 ]
( 4 ) 1.811
.512[ 13 ]
.512[ 13 ]
1.792[ 45.5 ]
.593[ 15.05 ]
.787[ 20 ]
.472[ 12 ]
.295[7.5]
.472[ 12 ]
[ 46 ]
R .019[ R 0.5 ]
( 4 )
.256[ 6.5 ]
1.811[ 46 ]
.256[ 6.5 ]
R .031[ R 0.8 ]
.512[ 13 ]
1.969[ 50 ]
.593[ 15.05 ]
.571[ 14.5 ]
.984[ 25 ]
.630[ 16 ]
.374[ 9.5 ]
( 4 )
.512[ 13 ]
.256[ 6.5 ]
.394[ 10 ]
.236[ 6 ]
.177[ 4.5 ]
1.811[ 46 ]
R .024[ R 0.6 ]
.512[ 13 ]
.256[ 6.5 ]
1.457[ 37 ]
.512[ 13 ]
.593[ 15.1 ]
R .016[ R 0.4 ]
42007
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 2v dies provides HRC-70.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42004
42006
42005
42007
CAT. No. V2INCHES [mm]
42004420054200642007
.709 [18.0]
.787 [20.0]
.984 [25.0]
.394 [10.0]
.551 [14.0]
.472 [12.0]
.630 [16.0].236 [6.0]
ANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
88˚88˚ 88˚ 88˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
30 / 10030 / 10021 / 7021 / 70
41Quick chanGe 2V dieS
WIth Large ShouLder radII
acute-anGle Quick chanGe 2V dieS
1.811[ 46 ]
( 2 )
R .059[ R 1.5 ]
.256[ 6.5 ] 1.575
[ 40 ]
.593[ 15.05 ]
.315[ 8 ]
.394[ 10 ]
.236[ 6 ]
R .098[ R 2.5 ]
.512[ 13 ]
.236[ 6 ]
.512[ 13 ]
( 2 )
1.969[ 50 ]
.512[ 13 ]
.512[ 13 ]
.593[ 15.05 ]
1.969[ 50 ]
R .039[ R 1 ]
.591[ 15 ]
.394[ 10 ]
.236[ 6 ]
.354[ 9 ]
( 4 )
.256[ 6.5 ]
1.969[ 50 ]
( 4 )
.472[ 12 ]
.709[ 18 ]
.315[ 8 ]
.571[ 14.5 ]
R .039[ R 1 ]
.593[ 15.05 ]
.512[ 13 ]
2.303 [ 58.5 ]
.256[ 6.5 ]
.512[ 13 ]
1.811[ 46 ]
( 2 )
.256[ 6.5 ]
1.969[ 50 ]
.512[ 13 ]
.551[ 14 ]
.787[ 20 ]
.472[ 12 ]
.394[ 10 ]
R .118[ R 3 ]
R .158[ R 4 ]
.512[ 13 ]
( 2 )
[ 15.05 ].593
1.811[ 46 ]
.394[ 10 ]
.315[ 8 ]
.236[ 6 ]
.236[ 6 ]
.593[ 15.1 ]
.512[ 13 ]
1.575 [ 40 ]
.256[ 6.5 ]
R .059[ R 1.5 ]
.512[ 13 ]
R .098[ R 2.5 ]
42012
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 2v dies provides HRC-70.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No. V2INCHES [mm]
420104201242011
.394 [10.0]
.394 [10.0]
.787 [20.0]
.236 [6.0]
.236 [6.0].472 [12.0]
ANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
90˚88˚ 88˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
24 / 80 24 / 80 30 / 100
42010
42020
42012
42021
42011
CAT. No. V2INCHES [mm]
4202042021
.394 [10.0]
.472 [12.0].236 [6.0].315 [8.0]
ANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
30˚ 30˚
ST16.34”
(415mm)
LT32.87”
(835mm)
XT 32.87"
(835mm)
9 / 309 / 30
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 2v dies provides HRC-70.
42Bolt doWn 2V dieS (old Style)
Note: All mounting hardware is included. v-opening modifications and die relief available
at an additional cost. Contact application sales desk for pricing and lead times.
Nitrex standard on all 2v dies provides HRC-70.
1.024[ 26 ]
( 4 )
R .016[ R 0.4]
1.969[ 50 ]
.138[ 3.5 ]
.197[ 5 ]
.276[ 7 ]
.158[ 4 ]
1.024[ 26 ]
( 2 )( 2 )
R .016[ R 0.4 ]
R .024 [ R 0.6 ]
.256[ 6.5 ]
.394[ 10 ]
.236[ 6 ]
.177[ 4.5 ]
1.969[ 50 ]
1.024[ 26 ]
1.969[ 50 ]
R .031[ R 0.8 ]
R .020 [ R 0.5 ]
.217[ 5.5 ]
.295[ 7.5 ]
.472[ 12 ]
.315[ 8 ]
( 2 ) ( 2 )
1.024[ 26 ]
1.969[ 50 ]
R .020[ R 0.5 ]
.413[ 10.5 ]
.709[ 18 ]
.551[ 14 ]
.335[ 8.5 ]
( 4 )
1.969[ 50 ]
R .020[ R 0.5 ]
.709[ 18 ]
.413[ 10.5 ]
.551[ 14 ]
.335[ 8.5 ]
1.024[ 26 ]
( 4 )
1.024[ 26 ]
R .031[ R 0.8 ]
1.969[ 50 ]
.374[ 9.5 ]
.630[ 16 ]
.984[ 25 ]
.571[ 14.5 ]
( 4 )1.024[ 26 ]
( 4 )
R .020[ R 0.5 ]
1.969[ 50 ]
.472[ 12 ]
.787[ 20 ]
.472[ 12 ]
.295[ 7.5 ]
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42030
42032 42034
42036
42031
42033
42035
CAT. No. V2INCHES [mm]
42030420314203242033420344203542036
.276 [7.0] .394 [10.0] .472 [12.0] .709 [18.0] .709 [18.0] .787 [20.0] .984 [25.0]
.158 [4.0]
.236 [6.0]
.315 [8.0]
.551 [14.0]
.551 [14.0]
.472 [12.0]
.630 [16.0]
AANGLE
MAX. TONFT / METER
(LT & ST)V1
INCHES [mm]
90˚90˚ 90˚ 90˚ 88˚ 88˚ 88˚
ST16.34”
(415mm)
LT32.87”
(835mm)
18 / 6021 / 7024 / 8030 / 10030 / 10030 / 10021 / 70
432V dieS With larGe Shoulder radii
(old Style)
SectionaliZed 2V dieS (old Style)
1.024[ 26 ]
R .059[ R 1.5 ]
2.165[ 55 ]
R .098[ R 2.5 ]
( 2 ) ( 2 )
.394[ 10 ]
.236[ 6 ]
.236[ 6 ]
.394[ 10 ]
2.165[ 55 ]
R .157[ R 4 ]
.591[ 15 ]
.787[ 20 ]
.472[ 12 ]
.394[ 10 ]
R .118[ R 3 ][ 26 ]
1.024
( 2 )( 2 )
1.811[ 46 ]
R .016 [ R 0.4 ]
.276[ 7 ]
.197[ 5 ]
.138[ 3.5 ]
.158[ 4 ]
.256[ 6.5 ] 1.969
[ 50 ]
.593[ 15.05 ]
( 4 )1.811[ 46 ]
( 2 ) ( 2 )
.256[ 6.5 ]
R .016[ R 0.4 ]
R .023[ R 0.6 ]
.394[ 10 ]
.256[ 6.5 ]
.177[ 4.5 ]
.236[ 6 ]
.593[ 15.05 ]
1.969[ 50 ]
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 2v dies provides HRC-70.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No. V2INCHES [mm]
42040 42041
.276 [7.0] .394 [10.0]
.158 [4.0]
.236 [6.0]
AANGLE
MAX. TONFT / METER
(LT & ST)V1
INCHES [mm]
90˚88˚
ST16.34”
(415mm)
LT32.87”
(835mm)
24 / 8030 / 100
CAT. No. V2INCHES [mm]
4205042051
.276 [7.0] .394 [10.0]
.158 [4.0]
.236 [6.0]
AANGLE
MAX. TONFT / METER
(XT)V1
INCHES [mm]
90˚90˚
XT32.87"
(835mm)
18 / 6021 / 70
42040
42050
42041
42051
44SectionaliZed 2V dieS (old Style)
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.
Nitrex standard on all 2v dies provides HRC-70.
1.811[ 46 ]
.256[ 6.5 ]
R .020[ R 0.5 ]
R .031[ R 0.8 ]
.593[ 15.05 ]
1.969[ 50 ]
.295[ 7.5 ]
.217[ 5.5 ]
.472[ 12 ]
.315[ 8 ]
( 2 ) ( 2 ) 1.811[ 46 ]
.256[ 6.5 ]
.593[ 15.05 ]
1.969[ 50 ]
.551[ 14 ]
.335[ 8.5 ]
.413[ 10.5 ]
.709[ 18 ]
R .020[ R 0.5 ]
( 4 )
1.811[ 46 ]
R .020[ R 0.5 ]
.593[ 15.05 ]
1.969[ 50 ]
.295[ 7.5 ]
.472[ 12 ]
.787[ 20 ]
.472[ 12 ]
( 4 )
.256[ 6.5 ]
1.811[ 46 ]
R .031[ R 0.8 ]
.984[ 25 ]
.630[ 16 ]
.256[ 6.5 ]
1.969[ 50 ]
.593[ 15.05 ]
.374[ 9.5 ]
.571[ 14.5 ]
( 4 )
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42052
42056
42054 / 42053 880 900
42055
CAT. No. V2INCHES [mm]
42052 42053420544205542056
.472 [12.0]
.709 [18.0]
.709 [18.0]
.787 [20.0]
.984 [25.0]
.315 [8.0]
.551 [14.0]
.551 [14.0]
.472 [12.0]
.630 [16.0]
AANGLE
MAX. TONFT / METER
(XT)V1
INCHES [mm]
90˚90˚ 88˚ 88˚ 88˚
XT32.87"
(835mm)
21 / 7030 / 10030 / 10030 / 10030 / 100
45SectionaliZed 2V dieS With larGe
Shoulder radii (old Style)
loW Profile SectionaliZed 2V dieS (old Style)
1.969[ 50 ]
R .023[ R 0.6 ]
.177[ 4.5 ]
.256[ 6.5 ]
.394[ 10 ]
.236[ 6 ]
R .016[ R 0.4 ]
1.969[50]
1.969[50]
.630[ 16 ]
1.969[50]
.593[ 15.05 ]
( 2 )( 2 )
.256[ 6.5 ]
.236[ 6 ]
R .059[ R 1.5 ]
(2)
.236[ 6 ]
R .098[ R 2.5 ]
(2)
.394[ 10 ]
.394[ 10 ]
1.811[ 46 ]
.256[ 65 ]
.593[ 15.05 ]
2.165[ 55 ] 2.165
[ 55 ]
.593[ 15.05 ]
R .157[ R 4 ]
.591[ 15 ]
.787[ 20 ]
.472[ 12 ]
.394[ 10 ]
1.811[ 46 ]
R .118[ R 3 ]
( 2 )( 2 )
.256[ 6.5 ]
.630[ 16 ]
R .019[ R 0.5 ]
.256[ 6.5 ]
R .031[ R 0.8 ]
.295[ 7.5 ]
.472[ 12 ]
.315[ 8 ]
1.969[ 50 ]
.593[ 15.05 ]
( 2 )( 2 )
.217[ 5.5 ]
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 2v dies provides HRC-70.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42070
42061
42071
42062
CAT. No. V2INCHES [mm]
4207042071
.394 [10.0]
.787 [20.0].236 [6.0] .472 [12.0]
AANGLE
MAX. TONFT / METER
(XT)V1
INCHES [mm]
90˚88˚
XT32.87"
(835mm)
24 / 8030 / 100
CAT. No. V2INCHES [mm]
4206142062
.394 [10.0]
.472 [12.0].236 [6.0] .315 [8.0]
AANGLE
MAX. TONFT / METER
(XT)V1
INCHES [mm]
90˚90˚
XT32.87"
(835mm)
21 / 7021 / 70
END VIEW
.591[ 15 ]
.591[ 15 ]
1.969[ 50 ].394
[ 10 ]
FRONT VIEW
462V die rail and clamP
StacKIng raILS
american to euroPean Quick chanGe 2V die
“H”
2.362[60]
.591[ 15 ]
["X"]
.592
1.969[ 50 ]
[15 ].276[ 7 ]
END VIEW
.591[ 15 ]
.591[ 15 ]
1.969[ 50 ].394
[ 10 ]
FRONT VIEWEND VIEW
.591[ 15 ]
.591[ 15 ]
1.969[ 50 ].394
[ 10 ]
FRONT VIEW
.500
“H”
2.362[60]
07.21005.
78.51 .625
60 2.362
31215.
07.21005.
78.51 .625
60 2.362
31215.
2V die holderS
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No.
4355332.87” (835mm) 16.34” (415mm)
CATALOGNUMBER
420914209242093
HEIGHTRANGE
X= .575 - 1.250X=1.251 - 2.000X=2.001 - 2.750
X32.87" (835mm)
L32.87” (835mm)
S16.34” (415mm)
CCAT. No.
53090
Max Ton/ftL & S
30
L32.87” (835mm)
S16.34” (415mm)
CAT. No.H
HEIGHT INCHES [mm]
L 32.87" (835mm)
S 16.34" (415mm)
43021 AT 1.536 [39mm]43022 AT 1.772 [45mm]43023 AT 2.953 [75mm]
CAT. No.H
HEIGHT INCHES [mm]
L 32.87" (835mm)
S 16.34" (415mm)
43021 1.536 [39mm]43022 1.772 [45mm]43023 2.953 [75mm]
CAT. No.L
32.87" (835mm)S
16.34" (415mm)
42089 [28-32 HRc]42090 [48-54 HRc]
47 Quick chanGe 88˚ & 90˚ 1V dieS
Note: Quick Change 1v Dies require die holder #43030 or #43530. v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.Nitrex standard on all Quick Change 1v dies provides HRC-70.
3.288[ 83.5 ]
( 2 )
.551[ 14 ]
R .059[ R 1.5 ]
.236[ 6 ]
.551[ 14 ]
R .059[ R 1.5 ]
( 2 )
.315[ 8 ]
3.288[ 83.5 ]
.669[ 17 ]
R .098[ R 2.5 ]
.472[ 12 ]
3.288[ 83.5 ]
( 2 )
.551[ 14 ]
3.288[ 83.5 ]
( 2 )
R .098[ R 2.5 ]
.669[ 17 ]
.551[ 14 ]
.472[ 12 ]
3.288[ 83.5 ]
.709[ 18 ]
R .098[ R 2.5 ]
( 2 )
.551[ 14 ]
.551[ 14 ]
3.288[ 83.5 ]
R .078[ R 2 ]
.551[ 14 ]
.394[ 10 ]
( 2 )
Note: Low Profile Quick Change 1v Dies require die holder #43030 or 43530. Nitrex standard on all Quick Change 1v dies provides HRC-70.
1.181[ 30 ]
R .059[ R 1.5 ]
.236[ 6 ]
.551[ 14 ]
( 2 )
1.181[ 30 ]
R .059[ R 1.5 ]
.551[ 14 ]
.315[ 8 ]
( 2 )
.551[ 14 ]
R .078[ R 2 ]
1.181[ 30 ]
.394[ 10 ]
( 2 )
.551[ 14 ]
.669[ 17 ]
[ R 2.5 ] R .098
.472[ 12 ]
1.181[ 30 ]
( 2 )
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42120, 42100880 900
42103900
42121, 42101880 900
42104880
42122, 42102880 900
42110 4211242111 42114
42105880
CAT. No.LT
32.87” (835mm)
4210042120 4210142121 421024212242103 4210442105
.236 [6.0]
.236 [6.0]
.315 [8.0]
.315 [8.0]
.394 [10.0]
.394 [10.0]
.472 [12.0]
.472 [12.0]
.551 [14.0]
AANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
90˚ 88˚ 90˚ 88˚ 90˚ 88˚ 90˚ 88˚ 88˚
XT32.87"
(835mm)30 / 10030 / 10030 / 10030 / 100 30 / 100 30 / 10030 / 10030 / 10030 / 100
ST16.34”
(415mm)
CAT. No.
42110421114211242114
AANGLE
90° 90° 90° 88°
MAX. TONFT / METER
V1INCHES [mm]
30 / 100 30 / 100 30 / 100 30 / 100
.236 [6.0]
.315 [8.0].394 [10.0].472 [12.0]
Call for priceand lead time.
loW Profile Quick chanGe 88˚ & 90˚ 1V dieS
48
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42200
3.288[ 83.5 ]
.551[ 14 ]
.630[ 16 ]
R .118[ R 3 ]
(2)
.236[ 6 ]
3.288[ 83.5 ]
.551[ 14 ]
.748[ 19 ]
R .118[ R 3 ]
(2)
.315[ 8 ]
42201
.394[ 10 ]
.551[ 14 ]
3.288[ 83.5 ]
42202
.945[ 24 ]
R .118[ R 3 ]
(2)
42203
3.288[ 83.5 ]
.551[ 14 ]
1.102[ 28 ]
R .197 [ R 5 ]
(2)
.472[ 12 ]
3.288[ 83.5 ]
.551[ 14 ]
1.260[ 32 ]
R .197[ R 5 ]
(2)
.551[ 14 ]
42204 42205
3.288[ 83.5 ]
R .197[ R 5 ]
(2)
1.417[ 36 ]
.551[ 14 ]
.630[ 16 ]
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 1v dies provides HRC-70.
42200
42203
42201
42204
42202
42205
CAT. No.LT
32.87” (835mm)
42200 4220142202 422034220442205
AANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
30˚30˚ 30˚ 30˚ 30˚ 30˚
ST16.34”
(415mm)
22 / 76 27 / 90 30 / 100 30 / 100 30 / 100 30 / 100
XT32.87"
(835mm).236 [6.0].315 [8.0] .394 [10.0] .472 [12.0] .551 [14.0].630 [16.0]
30˚ acute-anGle Quick chanGe 1V dieS
Quick chanGe 75° 1V dieS
3.288[ 83.5 ]
R .016
.551[ 14 ]
.118[ 3 ]
[ R 4 ]
44200
3.288[ 83.5 ]
R .059
.551[ 14 ]
.236[ 6 ]
[ R 1.5 ]
44201
3.288[ 83.5 ]
R .098
.669[ 17 ]
.394[ 10 ]
[ R 2.5 ]
.551[ 14 ]
44202
3.288[ 83.5 ]
R .118
.748[ 19 ]
.472[ 12 ]
[ R 3 ]
.551[ 14 ]
44203
3.288[ 83.5 ]
R .138
.945[ 24 ]
.630[ 16 ]
[ R 3.5 ]
.551[ 14 ]
44204
[ 28 ]
[ R 4 ]
1.102
R .157
.787[ 20 ]
.551[ 14 ]
[ 83.5 ]3.288
44205
[ 32 ]
[ R 4.5 ]
1.260
R .177
.866[ 22 ]
.551[ 14 ]
[ 83.5 ]3.288
44206
[ 36 ]
[ R 5.5 ]
1.417
R .216
.984[ 25�]
.551[ 14 ]
[ 83.5 ]3.288
44207
Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 1v dies provides HRC-70.
49
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
44200
44204 44206
44202
44201
44205 44207
44203
CAT. No.LT
32.87” (835mm)
44200442014420244203 44204442054420644207
.118 [3.0]
.236 [6.0]
.394 [10.0]
.472 [12.0]
.630 [16.0]
.787 [20.0]
.866 [22.0]
.984 [25.0]
AANGLE
MAX. TONFT / METER(LT, ST & XT)
V1INCHES [mm]
75° 75° 75° 75° 75° 75° 75° 75°
ST16.34”
(415mm)
30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100
XT32.87"
(835mm)
50
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
2.362 [ 60 ]
.866 [ 22 ]
.555 [ 14.1 ]
1.181 [ 30 ]
1.102 [ 28 ]
1.181[ 30 ]
.555[ 14.1 ]
.866[ 22 ]
2.362[ 60 ]
1.102[ 28 ]
SIDE VIEW
TOP VIEW
Note: Available with die tang. Contact application sales desk for pricing and lead times.
1.181[ 30 ]
.555[ 14.1 ]
.866[ 22 ]
2.362[ 60 ]
1.102[ 28 ]
SIDE VIEW
TOP VIEW
CAT. No.
43559PRICE
CAT. No.
43030
L32.87” (835mm)
S16.34” (415mm)
CAT. No.
43530
LT32.87” (835mm)
ST16.34” (415mm)
Quick chanGe 1V die holder and Wedge BLocK
Note: Available with die tang. Contact application sales desk for pricing and lead times.
acute-anGle 30° & 45° larGe 1V dieS51
2.362[ 60 ]
R .118[ R 3 ]
2.362[ 60 ]
( 2 )
.709[ 18 ]
2.362[ 60 ]
.984[ 25 ]
2.559[ 65 ]
R .157[ R 4 ]
(2)
1.260[ 32 ]
R .196[ R 5 ]
2.362[ 60 ]
2.362[ 60 ]
( 2 )
2.362[ 60 ]
1.575[ 40 ]
R .196[ R 5 ]
3.150[ 80 ]
3.150[ 80 ]
( 2 )
R .236[ R 6 ]
1.969[ 50 ]
2.362[ 60 ]
3.740[ 95 ]
3.740[ 95 ]
( 2 )
Note: Acute-Angle Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering. v-opening modifications and die relief available at an
additional cost. Contact application sales desk for pricing and lead times.
Nitrex standard on all large 1v dies provides HRC-70.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42300
42302
42304
42301
42303
CAT. No.LT
32.87” (835mm)
4230042301423024230342304
.709 [18.0]
.984 [25.0] 1.260 [32.0]1.575 [40.0]1.969 [50.0]
AANGLE
MAX. TONFT / METER
(LT & ST)V1
INCHES [mm]
30°30° 45°45°45°
ST16.34”
(415mm)
24 / 80 18 / 6012 / 40 21 / 7021 / 70
30° 30°
45°
45°
45°
52
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
2.362[ 60 ]
1.260[ 32 ]
2.362[ 60 ]
R .157[ R 4 ]
( 2 )
2.362[ 60 ]
1.575[ 40 ]
2.362[ 60 ]
R .157[ R 4 ]( 2 )
2.362[ 60 ]
1.968[ 50 ]
R .157[ R 4 ]
2.362[ 60 ]
( 2 )
3.150[ 80 ]
2.362[ 60 ]
2.953[ 75 ]
R .196[ R 5 ]
2.480[ 63 ]
( 2 )
Note: Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering. v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all large 1v dies provides HRC-70.
CAT. No.LT
32.87” (835mm)
42400424014240242403
1.260 [32.0]1.575 [40.0] 1.968 [50.0]2.480 [63.0]
AANGLE
MAX. TONFT / METER
(LT & ST)V1
INCHES [mm]
85°85°85°85°
ST16.34”
(415mm)
30 / 10030 / 10030 / 10030 / 100
42400
42402
42401
42403
larGe 85° 1V dieS
larGe 85° 1V dieS53
Note: Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering.v-opening modifications and die relief available at an additional cost.
Contact application sales desk for pricing and lead times.
Nitrex standard on all large 1v dies provides HRC-70.
3.740[ 95 ]
2.362[ 60 ]
3.150[ 80 ]
3.740[ 95 ]
R .236[ R 6 ]
( 2 )
R .275[ R 7 ]
4.331[ 110 ]
2.362[ 60 ]
4.724[ 120 ]
3.937[ 100 ]
( 2 )
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42404
42405
CAT. No.LT
32.87” (835mm)
4240442405
3.150 [80.0]3.937 [100.0]
AANGLE
MAX. TONFT / METER
(LT & ST)V1
INCHES [mm]
85°85°
ST16.34”
(415mm)
30 / 10030 / 100
54
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
Note: Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering.
Please check width of lower beam of press brake prior to ordering die #42406.
v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.
Nitrex standard on all large 1v dies provides HRC-70.
1.969[ 50 ]
2.362[ 60 ]
6.063[ 154 ]
3.543[ 90 ]
4.921[ 125 ]
[ 123 ] 4.843
R .354[ R 9 ]( 2 )
larGe 1V die holderCAT. No.
43040
L32.87” (835mm)
S16.34” (415mm)
CAT. No.ST
16.34” (415mm)
42406 4.921 [80.0]
AANGLE
MAX. TONFT / METER
(LT & ST)V1
INCHES [mm]
80° 30 / 100
1.969[50]
850
880
1.378[35]
2.362[60]
2.362[60]
.630[16]
.867[22]
eXacta 4 Way die
Cat.No. V Opening Angle Max TonFt/Meter
32.87" L[835mm]
32.87" X[835mm]
42340
V1 .630" [16] 88
30/100V2 1.378" [35] 85
V3 .867" [22] 88
V4 1.969" [50] 85
larGe 80° 1V die
Note: Exacta 4 Way Die is hardened, but does not have Nitrex surface enhancement.
55
Note: *Dimensions are for shut height. †Offset height may vary as much as +- .020" (0.5mm) after bending. All angles will be obtuse. Special offset sizes are available at additional cost. Nitrex (HRC-70) standard on all dies. Quick change offset tools are available at additional cost.
Part No. 43104
.375[ 9.52 ]
3.524[ 89.51 ]
†
*
3.569[ 90.65 ]
.312[ 7.9 ]
Part No. 43103
†
*
3.480[ 88.39 ]
.438[ 11.1 ]
Part No. 43105
†
*
3.701[ 94 ]
.125[ 3.18 ]
PART NO.43100
†
*
these are the right size
EXTRA PARTS
5.118[ 130 ]
3.657[ 92.88 ]
.188[ 4.8 ]
PART NO. 43101
†
*
.250[ 6.4 ]
3.612[ 91.76 ]
PART NO. 43102
†
*
3.436[ 87.27 ]
.500[ 12.7 ]
Part No. 43106
*
†
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
raIL StyLe offSet tooLS
CAT. No.LT
32.87” (835mm)
43100 4310143102 4310343104 43105 43106
.125 [3.18]
.188 [4.8]
.250 [6.4]
.312 [7.9]
.375 [9.52]
.438 [11.1]
.500 [12.7]
MAX. TONFT / METER(LT, ST & XT)
MAX.MATERIAL
OFFSET DIM. INCHES [mm]
30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100
ST16.34”
(415mm)
18 GA. CRS 18 GA. CRS 18 GA. CRS 18 GA. CRS 16 GA. CRS 16 GA. CRS 16 GA. CRS
XT32.87"
(835mm)
43100 4310343101
43104
43102
43105 43106
EFFECTIVE V
.177" .266".354".441".530".619".707"
56
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
quIcK change raIL StyLe fLattenIng dIe
30˚ 3V hemminG die
fLattenIng dIe
3.780[ 96 ]
2.362[ 60 ]
4.110[ 104.4 ]
3.110[ 79 ]
2.362[ 60 ]
.394[ 10 ]
R .039[ R 1 ]
.236[ 6 ]
.472[ 12 ]
R .039[ R 1 ]
2.362[ 60 ]
R .039[R 1]( 2 ) ( 2 )
( 2 )
1.969[ 50 ]
.593[ 15.05 ]
1.969[ 50.0 ]
.570[ 14.5 ]
Nitrex standard on all dies provides HRC-70.
Note: Designed to run with standard 2v Quick Change die system. Custom heights available for stage bending. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change dies provides HRC-70.
Nitrex standard on all dies provides HRC-70.
CAT. No.
42312
MAX. TONFT / METER(LT, ST & XT)
30 / 100
XT32.87" (835mm)
ST16.34” (415mm)
LT32.87” (835mm)
CAT. No. V3INCHES [mm]
42310 .276 [7.0].276 [7.0]
MAX. TONFT / METER
(LT & ST)V1
INCHES [mm]V2
INCHES [mm]
30 / 100 .158 [4.0]
ST16.34” (415mm)
LT32.87” (835mm)
CAT. No.
42311
MAX. TONFT / METER
(L & S)
30 / 100
S16.34” (415mm)
L32.87” (835mm)
fLattenIng PuncheS57
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
.906[ 23 ]
"H"
1.575[ 40 ]
WT-41523
1.101[ 27.97 ]
"H"
.551[ 14 ]
1.181[ 30 ] .472
[ 12 ]
WT-41630
1.101[ 27.97 ]
41523 41630
CAT. No.
4152341630
MAX. TONFT / METER
(LT & ST)
30 / 10030 / 100
ST16.34” (415mm)
LT32.87” (835mm)
HHEIGHT
INCHES [mm]
2.559 [65.0]3.307 [84.0]
58
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
rePlacement V-BlockS for WilSon hemminG dieS
.236[ 6 ]
.039[ 1 ]
.630[ 16 ]
.551[ 14 ]
.906[ 23 ]
Part No.43522
.315[ 8 ]
.630[ 16 ]
.551[ 14 ]
.906[ 23 ]
.039[ 1 ]
.394[ 10 ]
.630[ 16 ]
.866[ 22 ] 1.220
[ 31 ]
.039[ 1 ]
1.181[ 30 ]
.394[ 10 ]
1.720[ 43.7 ]
.118[ 3 ]
Note: Nitrex (HRC-70) standard on all dies.
H
2.362
[ 60 ]
43522
43524
43523
43528
CAT. No. V1INCHES [mm]
43522435234352443528
.236 [6.0]
.315 [8.0].394 [10.0] .394 [10.0]
20 GA. CRS16 GA. CRS14 GA. CRS 14 GA. CRS
MAX. TONFT / METER
(LT & ST)MAX.
MATERIAL
20 / 6720 / 6720 / 67 25 / 83
ST16.34” (415mm)
LT32.87” (835mm)
CAT. No.V1
INCHES [mm]
H HEIGHT INCHES
[mm]
MAX. TON FT / METER
(LT & ST)
MAX MATERIAL
LT 32.87"
(835mm)
ST 16.34"
(415mm)
42601 .236 [6.0] 4.587 [116.5] 20/67 20 GA. CRS
42602 .315 [8.0] 4.587 [116.5] 20/67 16 GA. CRS
42603 .394 [10.0] 4.902 [124.5] 20/67 14 GA. CRS
42608 .394 [10.0] 5.402 [137.2] 25/83 14 GA. CRS
hemmIng dIeS
2 StaGe hemminG Punch & die59
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
.394[ 10 ]
4.094[ 104 ]
30˚
4.331[ 110 ]
2.362[ 60 ]
R.039[ 1 ]
2 Stage Hemming Punch & Die Assembled
CAT. No.
4190943595
MAX. TONFT / METER(LT, ST & XT)
30 / 100 30 / 100
XT32.87" (835mm)
ST16.34” (415mm)
LT32.87” (835mm)
41909
43595
Note: 16 ga. maximum material.Nitrex (HRC-70) standard on all dies.
60
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
magnetIc SquarIng arm SIde gauge
quIcK change BacK gauge StoPPer PLate/PadS
*Note: Intended for use with Quick Change, 2v, Sectionalized 2v, and Quick Change 1v Dies.
Note: Quick Change Back Gauge Stopper Pads are for Amada Style Back Gauges.
Adjustable Back Gauge Stopper Plate
Single Point PadCAT. No. 42709
Reworkable PadCAT. No. 42712
Sheet Support Pad CAT. No. 42708
Replaces Original Pad CAT. No. 42707
CAT. No.
42750L (left) 42750R (right)
PRICE
CAT. No.
42701
PRICE
CATALOGNUMBER
42703PRICE
CAT. No. PRICE
42707 427084270942712
DESCRIPTION
Replaces Original Pad Sheet Support Pad Single Point Pad Reworkable Pad
61 urethane holderS & PadS
1.693[ 43 ]
2.362[ 60 ]
.984[ 25 ]
1.181[ 30 ]
3.268[ 83 ]
2.362[ 60 ]
4.724[ 120 ]
1.181[ 30 ]
3.150[ 80 ]
3.583
[ 60 ]
[ 91 ]
2.362
[ 100 ]3.937
1.969[ 50 ]
1.969[ 50 ]
5.906[ 150 ]
2.362[ 60 ]
4.252[ 108 ]
1.772[ 45 ]
4.331[ 110 ]
Note: All urethane die holders are machined from 6061-T6 aluminum. Urethane holders may require die holder #43040.
Check height against machine stroke prior to ordering.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No. DESCRIPTIONSHORE
HARDNESS
L 32.87"
(835mm)
S 16.34"
(415mm)
42501 Urethane Holder N/A
42511 Urethane Pad 80A/Red42521 Urethane Pad 90A/Blue
CAT. No. DESCRIPTIONSHORE
HARDNESS
L 32.87"
(835mm)
S 16.34"
(415mm)
42502 Urethane Holder N/A
42512 Urethane Pad 80A/Red42522 Urethane Pad 90A/Blue
CAT. No. DESCRIPTIONSHORE
HARDNESSL 32.87" (835mm)
S 16.34" (415mm)
42503 Urethane Holder N/A
42513 Urethane Pad 80A/Red42523 Urethane Pad 90A/Blue
CAT. No. DESCRIPTIONSHORE
HARDNESSL 32.87" (835mm)
S 16.34" (415mm)
42504 Urethane Holder N/A
42514 Urethane Pad 80A/Red42524 Urethane Pad 90A/Blue
62
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No. DESCRIPTIONSHORE
HARDNESSL 32.87" (835mm)
S 16.34" (415mm)
42503 Urethane Holder N/A
42513 Urethane Pad 80A/Red42523 Urethane Pad 90A/Blue
CAT. No. DESCRIPTIONSHORE
HARDNESSL 32.87" (835mm)
S 16.34" (415mm)
42504 Urethane Holder N/A
42514 Urethane Pad 80A/Red42524 Urethane Pad 90A/Blue
urethane ProductS
CAT. No. ANGLE V1Opening
V2Opening
HHeight
WWidth
PRICEL
PRICES
42001u 900 .23" [6] .39" [10] 1.81" [46] 1.45" [37]42002u 900 .31" [8] .47" [12] 1.81" [46] 1.53" [39]42004u 880 .55" [14] .70" [18] 1.81" [46] 1.77 [45]42005u 880 .47" [12] .78" [20] 1.81" [46] 1.79" [45.5]42006u 880 .63" [16] .98" [25] 1.81" [46] 1.96" [50]42021u 300 .31" [8] .47" [12] 1.81" [46] 2.30" [58.5]
1.53[39]
1.81[46]
.31[8]
.47[12]
.51[13]
.47[12]
.78[20]
1.81[46]
1.79[45.5]
.51[13]
.51[13]
1.81[46]
2.30[58.5]
.31[8]
.47[12]
.23[6]
.39[10]
1.81[46]
1.45[37]
.51[13]
.51[13]
.51[13]
1.77[45]
1.81[46]
.55[14]
.70[18]
1.81[46]
1.96[50]
.63[16]
.98[25]
900 900
300
880
880 880
42001ue 42002ue 42004ue
42005ue 42006ue 42021ue
.39[10]
.31[8]
.47[12]
.55[14]
.70[18]
.47[12]
.63[16]
.78[20]
.98[25]
.31[8]
.47[12]
.51[13]
.51[13]
.51[13]
.51[13]
.51[13]
.51[13]
63 Z1 narroW Punch holderS
5.118[ 130 ]
1.969[ 50 ]
3.937[ 100 ]
.276[ 7 ]
Part No. 43000
5.118[ 130 ]
1.969[ 50 ]
3.937[ 100 ]
.276[ 7 ]
Part No. 43000
1.969[ 50 ]
5.906[ 150 ]
Part No. 43001
4.724[ 120 ]
.787[ 20 ]
1.969[ 50 ]
5.906[ 150 ]
Part No. 43001
4.724[ 120 ]
.787[ 20 ]
Z2 narroW Punch holderS
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No. PRICE MAX. TON
43001 30 T/FT
CAT. No. PRICE MAX. TON
43000 30 T/FT
64Z2 Style deeP Punch holder
9.842[ 250 ]
.787[ 20 ]
8.662[ 220 ]
Part No. 43002
Note: Punch holder #43002 is designed for Z2 style upper beams, but may be modified for a Z1 center by using kit #980079.
Bend Limit Graph - Page 37
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CAT. No. MAX. TONFT/METER LENGTH PRICE
43002 15/50 5.906 [150mm]980079 Z1 Conversion kit 5.906 [150mm]
43002 Z2 Punch Holder
980079 Z1 Conversion Kit
65 StacKIng Punch hoLder
5.118[ 130 ]
3.937[ 100 ]
5.906[ 150 ]
Part No. 43003
.276[ 7 ]
EXISTING CLAMP PLATEPart #43531CLAMP PLATE
SPECIAL BOLT
Part No. 42720
EXISTING DISTANCE PIECEASSEMBLY (PUNCH HOLDER)
EXISTING SPRINGSPRING
CLAMP FRONT (CW)
CLAMP REAR (CCW)
SPECIAL LOCKING CAP
Part No. 42710
EXISTING SPRING
EXISTING CLAMP PLATE
EXISTING DISTANCE PIECEASSEMBLY (PUNCH HOLDER)
SPRING
Part #43519CLAMP PLATE
WITH SAFETY TONGUE
SPECIAL LOCKING CAP
SPECIAL BOLT
CLAMP FRONT (CW)
CLAMP REAR (CCW)
5.118[ 130 ]
3.937[ 100 ]
5.906[ 150 ]
Part No. 43003
.276[ 7 ]
duaL cLamPIng KItS
Part No. 42710 Part No. 42720
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
42710, 43531 42720, 43519
CAT. No. MAX. TON PRICE
43003 30 T/FT
CAT. No. PRICE
42710427204351943531
66euroPean Punch hoLderS
5.906[ 150 ]
2.638[ 67 ]
1.575[ 40 ]
Part No. 43004
these are the right size
EXTRA PARTS
5.118[ 130 ]
5.906[ 150 ]
2.638[ 67 ]
1.575[ 40 ]
Part No. 43004
these are the right size
EXTRA PARTS
5.118[ 130 ]
euroPean dIe hoLder
1.536[ 39 ]
2.362[ 60 ]
*Note: Please verify press brake tongue slot width when ordering.
For Conventional Press Brakes without punch holder height adjustment.
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
08.05000.2
06263.2
European to AmericanEuropean to American
CAT. No. Description
Max Ton/ft=
L & S
L 36"
S 18"
43590 European to American Punch Holder 40
American to EuropeanAmerican to European
CAT. No. Description
Max Ton/ft=
L & S
L 36"
S 18"
43006 American to European Die Holder 40
CAT. No. PRICE
43004
67 WILSon PreSS BraKe tooLIng caBInet
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
90007 Cabinet Features: • Mobile base with heavy duty casters with a
rated capacity of 3600 pounds • Dies are separated by custom U-channels to
prevent damage to v-openings • Individual latches on all drawers • Full width handles with end caps and paper
labeling strips with clear protective label covers
urethane roLLS
Note: Urethane dies are also available for mark-free bending. Contact application sales desk for pricing and lead times.
meaSurinG deViceS
Urethane Rolls For Mark-Free Bending
CAT. No. PRICE
425304253142532
DIMENSIONS
.015 [0.4] x 6” [152] x 100'
.030 [0.8] x 6” [152] x 100'.022 [0.56] x 6” [152] x 100'
91007 Tip-up Punch Cabinet for European Style Press Brake Tooling Features: • Integrated locking easily activated with one hand • Handle and base extensions for casters
• Solid steel construction• Drawer capacity of 440lbs/drawer• Retainer top with rubber mat• Label protectors for each drawer• Lock in Mechanism• 2 swivel casters with total brake (2) fixed
casters• Safety interlock to prevent the opening of more
than one drawer at a time • Punches are held upright in custom steel
U-channels to prevent damage to tips and mounting tongues
974117 974118974119
Common Features
055 Avalanche Blue
051 Everest Blue
052 Classic Blue
057 Midnight Blue
102 Boreal Green
091 Black
041 Beige
061 Frost White
071 Light Gray
072 Charcoal Gray
208 Yellow
085 Sienna Orange
081 Flame Red
616 White
*Colors may differ slightly from those illustrated.
• Allow 15 days lead time for custom colors
CUSTOM COLOR OPTIONS
STOCKCAT. No.
Lead Time
(Days)Height Width Depth
Drawers IncludedPrice2"
[50mm]3"
[76mm]7"
[175mm]8"
[203mm]
90007 20 42" 40.25" 22.5" 2 N/A 3 N/A
91007 5-15 45.5" 42" 24" N/A 2 1 2
CAT. No. PRICE
974117974118974119974150980065
DESCRIPTION
Thickness GaugeCaliperCube
MagnetDigital Ruler Protractor Set
(includes 4", 8" 12")
TIR
V
MF
AIR
BEN
DIN
G F
OR
CE
CH
ART
M
ETR
IC
Soft
Bras
s....
......
......
......
......
......
...To
ns P
er M
eter
x 5
0%So
ft Al
umin
um...
......
......
......
......
...To
ns P
er M
eter
x 5
0%H
eat T
reat
ed A
lum
inum
Allo
ys...
..Ton
s Pe
r Met
er x
100
%St
ainl
ess
Stee
l.....
......
......
......
......
.Ton
s Pe
r Met
er x
150
%
STA
ND
AR
D F
OR
MU
LAS
FO
R S
ELE
CT
ING
A V
-OP
EN
ING
MAT
ER
IAL
TH
ICK
NE
SS
: 2.6
mm
OR
LES
S =
T x
6
3.00
mm
- 8.
0mm
= T
x 8
9.
00m
m -
12.0
0mm
= T
x 1
0
14.0
0mm
& T
HIC
kER
= T
x 1
2N
OTE
: The
ab
ove
form
ulas
are
for
ref
eren
ce o
nly.
For
mor
e sp
ecifi
c in
form
atio
n, p
leas
e re
fer
to t
he c
hart
bel
ow.
The
ben
din
g fo
rce
(tonn
age)
fig
ures
list
ed a
bov
e ar
e b
ased
on
mild
ste
el w
ith a
ten
sile
str
engt
h of
45-
50 k
ilogr
ams
per
sq
uare
m
illim
eter
. To
calc
ulat
e th
e ap
pro
xim
ate
ben
din
g fo
rce
(tonn
age)
req
uire
men
ts f
or o
ther
mat
eria
ls, p
leas
e us
e th
e m
ultip
liers
list
ed.
Not
e: *
Base
d on
ben
ding
to a
n in
clud
ed a
ngle
of 8
8 de
gree
s. T
his
dim
ensi
on w
ill in
crea
se w
hen
bend
ing
to a
n in
clud
ed a
ngle
of l
ess
than
88
degr
ees.
T =
MAT
ERIA
L TH
ICKN
ESS
• V =
V-O
PENI
NG •
MF
= M
INIM
UM F
LANG
E LE
NGTH
• IR
= IN
SIDE
RAD
IUS
V (m
m)
34
67
810
1214
1618
2022
2532
4050
6380
100
125
160
200
250
*MF
2.2
2.8
4.2
4.9
5.6
7.0
8.6
10.1
11.5
13.0
14.4
*15.
818
24.0
30.0
37.5
47.3
60.0
75.0
96.3
123.
215
4.0
192.
5
IR0.
50.
71.
01.
21.
31.
72.
02.
32.
73.
03.
33.
74.
25.
36.
78.
310
.513
.316
.720
.826
.733
.341
.7
TH
ICK
NE
SS
0.5m
m5.
24.
52.
8
0.6m
m6.
04.
23.
33.
2
0.8m
m8.
07.
25.
64.
4
1.0m
m11
.010
.09.
07.
05.
5
1.2m
m14
.013
.210
.88.
47.
56.
6
1.4m
m15
.414
.012
.69.
88.
87.
7
1.6m
m17
.616
.014
.411
.210
.08.
8
2.0m
mT
22.0
20.0
18.0
16.0
14.0
12.5
11.0
2.3m
mO
25.3
23.0
20.7
18.4
16.1
14.4
12.7
2.6m
mN
28.6
26.0
23.4
20.8
18.2
14.3
3.0m
mS
33.0
30.0
28.5
327
.021
.016
.5
3.2m
m35
.231
.928
.822
.417
.614
.4
3.5m
mP
38.5
35.0
28.0
21.9
15.8
14.0
4.0m
mE
44.0
36.0
28.0
22.0
18.0
4.5m
mR
45.0
36.0
28.1
20.3
5.0m
m55
.045
.035
.026
.322
.5
6.0m
mM
60.0
54.0
37.5
31.5
24.0
7.0m
mE
56.0
43.8
31.5
28.0
9.0m
mT
72.0
56.3
40.5
10.0
mm
E90
.070
.052
.545
.0
12.0
mm
R10
8.0
84.0
63.0
54.0
16.0
mm
144.
011
2.0
84.0
72.0
19.0
mm
152.
011
8.8
99.8
22.0
mm
176.
013
7.5
25.0
mm
225.
017
5.0
30.0
mm
270.
0
TIR
V
MF
AIR BEN
DIN
G FO
RC
E CH
ART IN
CH
Soft Brass.....................................Tons Per Meter x 50%
Soft Aluminum
..............................Tons Per Meter x 50%
Heat Treated Alum
inum Alloys.....Tons Per M
eter x 100%Stainless Steel..............................Tons Per M
eter x 150%
STA
ND
AR
D F
OR
MU
LAS
FO
R S
ELE
CT
ING
A V-O
PE
NIN
G
MAT
ER
IAL T
HIC
KN
ES
S: .105” O
R LESS = T x 6
.120” - .313” = T x 8
.375” - .500” = T x 10
.625” & TH
ICkER
= T x 12
MAT
ER
IAL T
HIC
KN
ES
S: .036” - .437” = T x 8
.500” & TH
ICkER
= T x 10N
OTE
: The above form
ulas are for reference only. For more sp
ecific information, p
lease refer to the chart below
.
The bend
ing force (tonnage) figures listed ab
ove are based
on mild
steel with a tensile strength of 45-50 kilogram
s per sq
uare m
illimeter. To calculate the ap
proxim
ate bend
ing force (tonnage) requirem
ents for other materials, p
lease use the multip
liers listed.
Note: * Based on bending to an included angle of 88 degrees. This dim
ension w
ill increase when bending to an included angle of less than 88 degrees.
T = MATERIAL THICKNESS • V = V-OPENING • M
F = MINIM
UM FLANGE LENGTH • IR = INSIDE RADIUS
V (m
m)
46
78
1012
1416
1820
2532
4050
6380
100125
160200
250
V (“)
0.1570.236
0.2760.315
0.3940.472
0.5510.630
0.7090.787
0.9841.260
1.5751.969
2.4803.150
3.9374.921
6.2997.874
9.843
*MF
0.1100.165
0.1930.220
0.2760.331
0.3970.454
0.5100.567
0.7090.945
1.1811.476
1.8602.362
2.9533.789
4.8506.063
7.579
IR0.026
0.0390.046
0.0520.066
0.0790.092
0.1050.118
0.1310.164
0.2100.262
0.3280.413
0.5250.656
0.8201.050
1.3121.640
GA
UG
ED
EC
.
200.036
5.43.6
3.02.5
2.01.7
180.048
T7.2
5.84.8
3.72.7
2.42.0
160.060
O7.8
6.05.0
4.23.5
3.12.7
140.075
N11.3
7.57.1
5.64.8
4.13.2
120.105
S15.8
13.010.5
9.57.5
5.64.0
110.120
16.113.1
10.17.2
5.03.8
100.135
P12.0
8.16.2
4.73.5
3/160.188
E24.1
15.011.3
7.55.8
1/40.250
R30.0
20.015.0
10.58.5
5/160.313
37.625.0
18.813.1
10.0
3/80.375
F38.3
28.122.5
15.011.3
1/20.500
O52.0
39.030.0
22.016.0
5/80.625
O70.0
52.537.5
27.520.0
15.0
3/40.750
T66.0
45.032.3
22.5
11.000
90.060.0
44.0
1-1/41.250
102.575.0
70termS of SaLe
Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
CREDIT REQUIREMENTS All orders are subject to approval by our Credit Department. If you are a new account, please
furnish us with your tax exempt status, a bank reference, three current supplier references and/
or your current D&B rating with your first order. A credit limit will be imposed on new accounts
until credit has been established.
PAYMENT TERMS Terms are net 10 days. Catalog prices are subject to change without notice.
FREIGHTOrders are shipped F.O.B. from our manufacturing facility. (International Shipments are
Incoterms: Ex Works).
ORDER CANCELLATION In the event an order is cancelled, an additional charge will be assessed to cover the cost of
labor and material.
RETURNED MATERIAL A handling/restocking fee will be applied to all standard products returned for credit. A return
authorization number and shipping instructions must be obtained in advance before an item can
be returned.
CLAIMSAll claims or product shortages must be made within 30 days of the invoice date.
Press Brake Tooling Division12909 Farnham Avenue • White Bear Lake, MN 55110
Tel (Free): 800-445-4518Fax (Free): 800-539-4590Email: [email protected]
PRECISION TOOLING.UNBEATABLE PERFORMANCE.
For more than 40 years, Wilson Tool International ® has
provided industry-leading tooling solutions that enhance
the performance of sheet metal fabricators and
stampers worldwide.
The three divisions of Wilson Tool – Punching, Press
Brake, and Impax – represent the most comprehensive
line of tooling systems and accessories available. Our
ability to consistently provide innovative, high quality
products that outlast and outperform the competition
is why the world’s most successful fabricators rely
upon Wilson Tool tooling systems.
A knowledgeable global sales force, multilingual
customer support staff, same-day shipping and
extensive distribution network are just a few of the
benefits that keep our customers coming back time
and again.
© 2012 Wilson Tool International®
WILSON TOOL INTERNATIONAL
B300C
Wilson Tool International, Inc. - United States
Tel (Free): 800-328-9646 | Tel: 651-286-6001 Fax (Free): 800-222-0002 | Fax: 651-286-5959 Email: [email protected]
Wilson Tool International, Ltd. - United Kingdom
Tel (Free): 0800-373748 | Tel: +44 1793 831818 Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46 Email: [email protected]
Wilson Tool International - China
Tel: +86 21 51089638 | Fax: +86 21 64422195 Email: [email protected]
Wilson Tool International - Germany
Tel (Free): 00800-9457668665 | Tel: +49 5723 747 0 Fax (Free): 00800-945766329 | Fax: +49 5723 747 10 Email: [email protected]
Wilson Tool International A/S - Denmark
Tel (Free): 80 20 20 24 | Tel: +45 44 53 1699 Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607 Email: [email protected]
Wilson Tool International - France
Tel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81 Email: [email protected]
Wilson Tool International - Argentina
Tel: +54 114 7634004 | Fax: +54 114 5084190 Email: [email protected]
Wilson Tool - South Africa (Pty) Limited
Tel: +27 877 217 875 | Fax: 086 657 8629 Email: [email protected]
The Wilson Tool Company S. de R.L. de C.V. - Mexico
Tel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599 Email: [email protected]
Exacta Precision Products - Ontario
Tel: 800-268-5573 | Fax: 800-668-9314 Email: [email protected]
Exacta FabTool - Ontario
Tel: 905-840-2240 | Fax: 905-840-1032 Email: [email protected]
Milling Puncionadeiras - Brazil
Tel/Fax: 55 11 5621-2100 Email: [email protected]