PRESS-BLOW MACHINE W-SERIES · Press-blow machine W-series Our press-blow machine is the consequent...

2
PRESS-BLOW MACHINE W-SERIES MACHINERY FOR THE GLASS INDUSTRY

Transcript of PRESS-BLOW MACHINE W-SERIES · Press-blow machine W-series Our press-blow machine is the consequent...

Page 1: PRESS-BLOW MACHINE W-SERIES · Press-blow machine W-series Our press-blow machine is the consequent further development of the conventional process, where high-quality hollow glasses

PRESS-BLOW MACHINE W-SERIES

MACHINERY FOR THE GLASS INDUSTRY

Page 2: PRESS-BLOW MACHINE W-SERIES · Press-blow machine W-series Our press-blow machine is the consequent further development of the conventional process, where high-quality hollow glasses

Press-blow machine W-series

Our press-blow machine is the consequent further development of the conventional process, where high-quality hollow glasses are produced by pre-forming, pre-pressing and blowing, both in rotation blown-ware operation and in non-rotation blown-ware operation.

Contrary to the well-known machine concept, where the process mo-vements, such as pre-pressing and others, are realised pneumatically, WALTEC replaced the pneumatic drives, which could only be adjusted

in a dissatisfying way, by the latest servo technology in all ranges. That means, all move-ments of pressing plungers, pre-mould and article support are realised with servo tech-nology. For the fi rst time the press-blow process becomes transparent, can be controlled exactly and is reproducible.

Thus, all movements have a very high repeat accuracy, resulting in high process stability.

Furthermore, WALTEC met the requirements of the market for big-ger products. Our machine is fi t to produce articles with the following maximum dimensions. max. diameter: 160 mm max. height: 350 mm

In connection with our burn-off as well as laser crack-off machines we enable our customers to produce stem ware in high quality, increasing the range of application and consequently the effi ciency of the machine essentially.

Due to the modular construction technique our press-blow machines are available with all common numbers of stations: W1 / W2 / W3 → W24

Waltec Maschinen GmbH | Kronacher Str. 2a | 96352 Wilhelmsthal / Steinberg | Germany Phone +49 9260 9901-0 | Fax +49 9260 9901-99 | [email protected] | www.waltec.de

The information in this document contains general descriptions of technical possibilities and corresponds to the state-of-the-art at the time of printing. We reserve the right to make technical modifi cations.

Therefore, the required performance characteristics have to be specifi ed individually at the time of contract. Our employees are gladly at your disposal for individual consultation.

08-2016