Presentation to Why Waste Seminar 25 th February 2010 by Phil Pease IPA Chief Executive Officer IPA...
-
Upload
jewel-newman -
Category
Documents
-
view
215 -
download
0
Transcript of Presentation to Why Waste Seminar 25 th February 2010 by Phil Pease IPA Chief Executive Officer IPA...
Presentation to Why Waste Seminar
25th February 2010
by Phil PeaseIPA Chief Executive Officer
IPAThe Industrial Packaging Association
www.theipa.co.uk
www.theipa.co.uk
Phil Pease Chartered Wastes Manager
Specialty: Clinical & Hazardous Wastes Treatment
Member Chartered Institute of Wastes Management
Dangerous Goods Safety Adviser
CEO Industrial Packaging Association
Chair: of DfT Packaging Scheme Review Committee
Chair: British Standards Institution (BSI) Committees for - “Drums” & “Packaging and The Environment”
Also…. Instructor-Trainer for First Aid at Work
….and Scuba Diving Instruction !!!
www.theipa.co.uk
Purchase, Re-Use and Disposal Options for
Industrial Packaging Treatment Options for used Industrial Packaging
UN & ADR Transport Regulations for Industrial
Packaging Re-Use Consignment issues: Dangerous Goods vs Hazardous Wastes
Local opportunities lost ? / to be gained?
The Future….
www.theipa.co.uk
Purchase, Re-Use and Disposal Options for Industrial Packaging
www.theipa.co.uk
Not just Chemical Company Packaging of
course...• Drinks Manufacturers: Fruit Juice Concentrates =
Flammable
• Perfume Manufacturers: Concentrates = Irritant / Flammable
• Resins & Adhesives: Base Products = Flammable & Toxic
• Engineering : Mineral Oils = Hazardous Waste
• All Manufacturing Sectors: Paints, Adhesives, Lubricants
• Soaps & Detergents: Concentrates = Corrosive
www.theipa.co.uk
World-Wide Re-Use Infrastructure
IPAJDRA
RCMASA
EIPARIPA
AOSD
ICCR
www.theipa.co.uk
Purchase & Use of Industrial Packaging
Gaining real benefit from understanding Life Cycle Value
Review of a true situation....
Company’s Purchaser requires lowest cost 1000 litre IBC for non hazardous hair-care product base. Handling approx’ 10,000 units per year.
Options are: 1. 1000 ltr, UN Approved, Metal Base, with Ball or Ball Valve @ £752. 1000 ltr, Non UN, Wood Base with Butterfly Valve @ £65
Option 2 has a face value saving of £10 per unit x 10,000 = Saving of £100k per year - quite significant !
...or so you might think.......
www.theipa.co.uk
.....Company’s actual position:
Following use, the IBCs require disposal – with following options:
1. The Option 1 IBCs retain a market value for re-use as a UN container.Typical Market Value: circa £17 credit
2. The Option 2 IBCs retain little / if any market value as not permitted for hazardous (UN) products, or even for food products.
Nil re-use market = disposal options only, hence represent a cost: Typical Market Cost: circa £10 charge
Original saving of £10 per unit must be balanced against loss of £17 value at end of life plus a £10 cost for disposal
Result: Perceived saving of £10 is actually negated by disposal costs plus the further loss of £17 value – so true position shows that
Option 2 actually represents a net loss of £17 per unit or £170,000 .......now that’s REALLY significant!!!
www.theipa.co.uk
• UN & ADR Dangerous Goods Transport
• Disposal Options for Used Packaging
• Re-Use options (in-house or 3rd Party)
• Hazardous Waste Consignment
• International Service Provision
Purchase Considerations should include:
www.theipa.co.uk
The IPA represents UK and European leading Manufacturers and Reconditioners of Drums and IBCs.
These companies typically offer:
• Drums and IBCs in Steel, Plastic & Fibreboard
• National & International Delivery & Collection
• Variety of Packaging Designs and Types• Special / Hazardous Waste Treatment• UN Reconditioning & Leak Testing• Closed-Loop `Launder’ & Return• Final Disposal / Recycling Systems
Treatment Options for Used Packaging
www.theipa.co.uk
Treatment Options for Used PackagingDrum Disposal in the `Good Old Days’ - Circa 1970
www.theipa.co.uk
Current typical recovery operation 2010Treatment Options for Used Packaging
www.theipa.co.uk
Treatment Options for Used PackagingA professional reconditioning service will ensure each used industrial container (typically from 20 to 1200 litres) is inspected, cleaned and tested in an effort to gain the maximum re-use…..either returned to the supplier for refilling or for re-sale to the wider industry.
Only the non re-useable containers (having been cleaned) will be crushed / shredded / granulated etc. in preparation for materials recycling or energy recovery.
This inspection and cleaning of every container handled and the streaming for re-use or recycling means the Reconditioner is gaining the most environmentally and commercially efficient option for every used Drum & IBC collected.
www.theipa.co.uk
Treatment Options for Used PackagingTo gain the maximum benefit from the services offered by reconditioners, the following should be considered:
• Used packaging should be as empty as practically possible for the container type
• Pre-Rinsing is not usually required – and could reduce values - for example steel drums could rust if not properly dried internally.
• Product labels must always remain in place – to indicate true contents
• Correct closures should be securely in place
www.theipa.co.uk
UN and ADR Transport Regulations provide for various
aspects of packaging and IBC re-use
including;
Reconditioning, Re-Use, Repair, Routine Maintenance and also
Remanufacture
www.theipa.co.uk
Reusable Drums and IBCs manufactured for use with Dangerous Goods must be embossed with both
the UN symbol & the tested standard to enable fillers to ensure safety in
first use & repeated re-use with dangerous goods.
1A1/X/300/07/GB/1027
Example of a typical embossed UN mark
www.theipa.co.uk
The embossed markings show the tested standard of the packaging and (with reference to ADR) which classes
of product it can contain
1A1/X/300/07/GB/****
1 = drum
A = steel
1 = non removable head
X = packing group I, II or III
300 = vapour pressure in kPa
07 = year of manufacture
GB = country of certification
**** = manufacturer’s certificate number
Unless shown in the mark (eg; 1A1/X1.4/300) the specific gravity for liquids is 1.2
www.theipa.co.uk
The UK Department for Transport operates a Reconditioner Scheme
which regulates the industry, audits the companies registered
and issues the UN Certificates and marks for drums reconditioned for
dangerous goods use
Note the same format for the UN manufacturers’ marking – but with the addition of “RL” which indicates;Reconditioned & Leak Tested
The reconditioner’s certificate number may be replaced by the company name
There is no similar scheme for IBCs in the UK However the IPA are developing a Code of Practice – to be issued Jan 2008
www.theipa.co.uk
IBCs are also suitable for multiple re-use but not referred to in UN & ADR as “reconditioned” but
as;
Routine Maintenance (cleaned, dried & inspected)Repair (new part/s fitted)Remanufacture (different design parts with re-testing)
The modular design of the typical rigid, composite IBC makesthem ideal for repeated repair & re-use- however beware !!....
The replacement of any part that is not as per the original tested specificationwill cancel the UN certificate – meaningit is no longer suitable for use with Dangerous Goods.
www.theipa.co.uk
The company carrying out IBC Repair work for Dangerous Goods / Haz Wastes must also maintain a
record for each unit processed and leak tested
Also – any IBC that has been subject to Routine Maintenance or Repair must have durable markings to
identify who, when and where the work was carried out
In addition: for “Repair” (replacement of any worn / damaged parts) – that the IBC has been leak tested to the correct UN/ ADR standard
www.theipa.co.uk
BE CAREFUL…When re-using any packaging for dangerous goods /
hazardous wastes which utilises plastic elements (such as all the Drum and IBC types below) – there is a 5 year
maximum life limit !
This is why it is critical that the date of manufacture, repair or re-manufacture is indicated on the container.
Consignment Issues – Dangerous Goods vs Haz Waste
The UN & ADR Transport Regulations includes exemptionsspecific to the transport of Empty, Uncleaned Packaging.
This is (as always) a little complex – so seek the advice of a DGSA - but essentially it enables;
• No requirement for the orange marker plates• No requirement for full ADR Consignment Notes – basic wording
only• No requirement for external fire extinguishers (though this is still recommended and a small one in the cab is required)• No requirement for full 5 year ADR certified drivers (though awareness training is required)
Take care: Not Dangerous Goods – but still Hazardous Waste?.... eg; Mineral Oils www.theipa.co.uk
End of Life = End of Value ???..
www.theipa.co.uk
Resin Contaminated
IBCs
Shredding
Sticky mess !
Wash & Dry Systems
Clean, DryMaterial
For Sale !
Local Opportunities Lost ?.......
We are (slowly) beginning to understand the fact that materialscan be reduced, re-used, recycled, recovered etc…
Unfortunately we have a long way to go …… in Yorkshire alone we landfilled approx’ 90,000 tonnes of rigid plastics materials in 2007
At a (low) average of £150 / tonne in value that’s £13.5 million !
www.theipa.co.uk
Enough to make even a hedge fund manager cry!
Local Opportunities to be gained ?.......
In West Yorkshire alone we have a wealth of specialists:
www.theipa.co.uk
Waste Cleaning Equipment manufacturers: eg; Rotajet Systems, Ossett
Waste Shredding & Compaction Equipment manufacturers:
eg; Meltog Machinery Co. Leeds Specialised Plastics Recyclers / Reprocessors: eg; Linpac Castleford, i-Plas Halifax, etc
Specialist Advice & Support: Chamber of Commerce / Yorkshire Forward CO2 Sense etc.
The future ?.......
With increased awareness, cultural change and new technologieswe can see real progress – but we must not allow ourselves to be left behind in the UK….
www.theipa.co.uk
IPA Website
HOMEPAGE
MEMBER
PRODUCTS
& SERVICES STEEL DRUMS PLASTIC DRUMS FIBRE DRUMS IBCs
RECONDITIONING
&
RECYCLING CONTACT US
HOMEPAGE
The Industrial Packaging Association was formed in May 2004 from the merger of The Association of Drum Manufacturers, (ADM) The Rigid Intermediate Bulk Container Association (RIBCA) and members of the Federation of Drum Reconditioners (FCDR). The IPA is the leading UK trade organisation for Industrial Packaging and is directly involved with numerous UK, European and International Working Groups (inc; BSI, CEN,\ISO & United Nations) focusing on the essential Design, Safety and Environmental aspects of Industrial Packaging - to ensure the highest standards are maintained across the whole industry. The IPA aims to be pro-active in ensuring the UK’s Industrial Packaging Industry is promoted, recognised and respected both within the UK and Internationally. Customers of IPA Member Companies can be assured of the very highest standards of quality, life-cycle service and environmental care when purchasing packaging that needs to perform in the toughest environments. Take your time to have a look through this web site and review our member companies and their extensive range of products & services – feel free to contact us at any time for additional information.
© Copyright 2004 The Industrial Packaging Association | Site by Optix Solutions
The IPA website provides detailsof all UK members involved inManufacture and Reconditioningof drums and IBC packaging- From the homepage select;Member Products & Services
We also have page ofNews & Information which provides Codes of Practice, Guides and updates on variousissues and regulations etc.
CONTACT:
Phil PeaseThe Industrial Packaging AssociationP.O. Box 110KnaresboroughNorth YorkshireHG5 8ZX
Tel: 07770 – 633320
E-Mail: [email protected]: www.theipa.co.uk
Thank you
www.theipa.co.uk