• Presentation on :- PDMS DRAFT GENERATION

DRAFT produces fully annotated scale drawings showing selected parts of the design model created in PDMS DESIGN. DRAFT is fully integrated with DESIGN.

A model can be viewed from any direction, with hidden detail automatically removed or shown in a different line style, as required.

A drawing may contain more than one view of a 3D model; for example, a plan view, a front elevation and an isometric view may be displayed simultaneously.

WHAT DOES DRAFT DO?

THE DRAFT DATABASE HIERARCHY

INTRODUCTION TO ANNOTATION HIERARCHY

This Section describes the part of the Draft database used to store annotation elements, that is dimensioning elements, labeling elements, and 2D drafting elements (i.e. geometric primitives, symbols, and text). This part of the database hierarchy

SHEE

NOTE

LAYE

VNOT

GLAB

SLAB

TEXP

SYMB

CIRCELLI

RECTTABLETRI

DMNDHEXAMRKPSTRAARC

VIEW

ADIM

LDIM

PDIM

RDIM

2D DRAFTINGELEMENTS

DIMENSIONINGELEMENTS

LABELLINGELEMENTS

• DIMENSIONING AND LABELLING ELEMENTS ARE OWNED BY LAYER.

• OTHER TEXT, SYMBOLS AND GRAPHICS ARE OWNED BY NOTES. THERE ARE TWO TYPES OF NOTE:

• SHEET NOTES (NOTE) OWNED BY SHEET.

• VIEW NOTES (VNOTE) OWNED BY VIEWS.

THE DIMENSIONNING HIERARCHY

BENEFITS

• WE CAN TAKE FOLLOWING OUTPUTS FROM PDMS DRAFT

• NOZZLE REPORT TABLE :- (SIZE, RATING, ELEVATION, PROJECTION, DIRECTION, DEGREE )

• FULLY ANNOTATED AND DIMENSIONED ENGINEERING DRAWING.

• DRAWING CREATED IN DRAFT OR ISODRAFT TO BE TRANSFERRED TO AUTOCAD, WHICH CAN THEN BE USED TO FINISH THE DRAWING.

HOW TO START DRAFT GENERATION

SETUP BY DTS

CLICK

PDMS DRAFT MAIN MENU DISPLAY WINDOW

MAIN MENU BARMAIN TOOL BAR

MODIFY MODE

STATUS AREA

CREATE DEPARTMENT

CLICK

CLICK

CLICK

CLICK

CLICK

CLICK

CLICK

CLICK

WORKING TOOL

CLICK FOR MEMBER BAR

CLICK FOR COMMAND WINDOW

COMMAND WINDOW FOR TO SEE QUERY OF ELEMENTS & ITS UPDATION

VIEW LAYER

VIEWS HIERARCHY

VIEWS

ELEVATION

PLAN

ISOMETRIC

TEMPLETE WITH THREE VIEW

HOW TO ADD EQUIPMENT

SELECT

HOW TO SELECT EQUPMENT

SELECTEQUIP.

YOU CAN SEE HERE ADDEDEQUIP. NAME

CLICK

1

2

CLICK 3CLICK 4

MODIFY VIEW

PROCEDURE FOR UPDATION OF DRAFT

DIMENSION TOOLBAR

DIMENSION TOOLBAR

AFTER SELECTION OF ANY TYPE OF DIMENSION, THIS DIALOUGUE

BOX WILL APPEAR

LAYERS

NOTE LAYER

DIMENSIONLAYER

ANNOTATION & LABEL TOOLBAR

SELECT SYMBOL FROM LIBRARY

ANNOTATION & LABEL TOOLBAR

HOW TO ADOPT CHANGES DONE IN MODEL IN THE DRAFT COPY

1

2 3

HOW TO CREATE INDIVIDUAL SECTION

NORTH

SOUTH

WESTEAST

ELEVATION