PREFABRICATED WALL SOLUTION

MiTek ONEWALL integrates Benson

unitized curtain wall design principles and

pressure equalized rain screen into an

innovative prefabricated wall solution.

Why ONEWALL?• One Manufacturer

• One Installer

• One Warranty

• Prefabricated Quality

• Eliminate Scope Gaps

• Schedule Compression*Patent Pending

How it Works it Works

1. Pressure Equalized Perimeter Extrusions

2. Cold-Formed Steel Stud

3. Exterior Sheathing and Vapor Barrier

4. Mineral Wool Insulation - Inboard & Outboard

5. Thermally Broken Carrier System

6. Rain Screen Cladding

7. Wind

2

4 1

5

7

3

6

Utilize Benson Curtain Wall Stack Joint Technology

Installation• Simple Crane Hoist

• No Scaffolding or Mast Climbers

• Reduces Field Personnel

• Type A Construction

Why ONEWALL is Right for Your Project

Quality, Performance and Speed:• Unitized, thermally broken, pre-engineered • Enables traditional façade design that incorporates rain screen and glazing to be prefabricated into

modules and brought to the job site ready to install• Taking a traditional fi eld installed application utilizing multiple trades and requiring intricate coordination

and instead building in a controlled environment to increase installation speed and quality• Dried in quicker. One entity, one system for weatherproofi ng, one holistic warranty• Less material on the fl oors, less material required to be transported in the material hoist• Eliminates scope gaps and diffi cult coordination between trades• Fewer tradespeople—greater safety• Limits amount of mobilization of trades• No need for scaffolding or mast climbers on the exterior to do the work• World-Renowned Benson quality• Multiple cladding options• Accomodates direct interior drywall attachement

Available Standard Exterior Finishes

Performance Tested: ONEWALL meets the following:• Air Infi ltration: ASTM E 283-12• Static Water @15 PSF: ASTM E 331-16• Dynamic Water @ 15 PSF: AAMA 501.1-17• Structural Design Load +/- 40 PSF: ASTM E 330-14• Structural Over Load +/- 60 PSF: ASTM E 330-14• Thermal R 20 or greater, U value of .05 or less with 5-1/2” insulation• ASTM E2307 for perimeter fi re containment rated up to three hours• Vertical Live Load +/- 1/2”: AAMA 501.7-17• Interstory Drift Elastic +/- 3/8”: AAMA 501.4-18• Interstory Drift Inelastic +/- 1-1/4”: AAMA 501.4-18

503.226.7611 www.BensonGlobal.com