PRECISION TOOL - TRACTO-TECHNIK GmbH & Co. KG · nal hydraulic station with hydraulic drive energy...
Transcript of PRECISION TOOL - TRACTO-TECHNIK GmbH & Co. KG · nal hydraulic station with hydraulic drive energy...
AUGER BORING UNIT
GRUNDOBORE 200S
PRECISION TOOL
trenchless technology – simple & easy
PINPOINT ACCURACYGRUNDOBORE 200S
The Horizontal Auger boring method is a reliable static pro-cess for installing sewer house connections as well as prod-uct and steel protection pipes under streets and railways tracks. Installations can be either steered or non-steered. With the steered method in sewer construction, high levels of on-target precision required in sewer construction can be achieved.
The compact GRUNDOBORE 200S is powered by an exter-nal hydraulic station with hydraulic drive energy and is par-ticularly suitable for installing sewer house connections and product and protection pipes up to DA 280.
Since the GRUNDOBORE 200S support frame and auger boring unit can be installed separately, launching is possible from a 1 m-manhole or exceptional small work pit.
GRUNDOBORE - 02/03
GRUNDOBORESYSTEMATIC PRECISION
01
03
02
06
05
04
01 Long stroke for extremely short construction lengths – effective rod length of 450 mm
02 Compact powerful rotary drive – installation of large pipe diameters in the most limited of spaces
03 Galvanised grid – safe base stand operator to stand on
ROTARY DRIVE
With quick-locking rods – simple rod connection,
no screwing together at the rotary drive.
04/05 - GRUNDOBORE
CORE BIT GUIDE
Precise spot drilling of the manhole wall.
BORE DIRECTION
Vertical adjustment of the drilling direction by +/- 11 %
is possible after installing the machine.
04 Thrust locking via foot pedal – for ease of operation
05 Mechanical, close-fitting rod clamp – safe rod release, minimum wear and tear
06 Semi-circular support plates – secure bracing in a 1 m manhole
FUNCTION PRINCIPLESAUGER BORING AND SPECIAL APPLICATIONS
GRUNDOBORE - 06/07
STANDARD APPLICATION FOR INSTALLING SEWER HOUSE CONNECTIONS AND CROSSINGS BENEATH ROADS AND RAILWAY TRACKS.
PHASE 1: PILOT ROD INSTALLATION
The pilot rods with the pilot bore head are pushed forward directionally (or nondirectionally) from out of the
manhole or pit.
PHASE 2: UPSIZING BORE
After installing the pilot rod, the drill rods are linked to the bore head and augers and are pulled back towards
the drill rig whilst rotating. Simultaneously, the augers transport the soil into a target pit, and the casing pipes
or retrievable steel pipes are pushed in over a bearing carrier at the end of the auger without need for rotation.
PHASE 3: PUSHING IN THE PIPE
By pressing in the product pipes from the direction of the drill rig, the retrievable pipes are pushed into the
target pit from where they are recovered.
SPECIAL APPLICATION: LINEAR HDD METHOD
One special application is the creation of HDD bores in difficult stony and rocky ground conditions.
SPECIAL APPLICATION: PIPE BURSTING METHOD
The renewal of property sewer service connections is another special application.
GRUNDOBORE ACCESSORIES
GRUNDOBORE - 08/09
CORE HOLE DRILL
HYDRAULIC UNIT HP-031
SUPPORT LAUNCH FRAME FOR PIT LAUNCHES
ACCESSORIES FOR SPECIAL APPLICATIONS
available on request
HDD ACCESSORIES PIPE BURSTING ACCESSORIES
ADAPTER RODS WITH TRIPLE-WING CUTTER BIT
non-directional
PILOT RODS WITH TRIPLE-WING DRILL BIT
CALIBRE AUGER DRILLSHOE PIPE RETRIEVABLE PLUG-ON PIPE
CONVEYOR AUGER BEARING CARRIER
TRANSMITTER HOUSING WITH STEERING HEAD
directional
GRUNDOBORE 200S
TECHNICAL SPECIFICATIONS
MANHOLE OR PIT LAUNCHING
GRUNDOBORE - 10/11
567
325
1789
625
Ø 1000
Support launch frame for pit launch.For launch from a 1 m circular manhole with a fracture open-ing of only Ø 62.5 cm, the rig can be disassembled into its single components (bore drive with pressing cylinders/ pressing frames).
PERFORMANCE DATAmetrical
GRUNDOBORE 200Simperial
Max. thrust force 200 kN 44,961.80 lbfMax. pulling force 250 kN 56,202.25 lbfCylinder stroke 280 mm 11.02 inMax. thrust speed 2 m/min 78.74 in/minMax. torque 3.800 Nm 2,802.88 lbf ftMax. spindle speed 60 U/min 60 rpmmax. hydraulic pressure 250 bar 3,625.95 psiLength x Width x Height 960 x 570 x 630 mm 37.80 x 22.44 x 24.80 inWeight 400 kg 881.84 lbsAxis height/axis height with steel frame application (pit launch) 325/375 mm 12.80/14.76 inLaunch manhole (circular manhole) Ø 1 m Ø 3.28 inLength of launch pit 1,2 m 3.94 ftLength of target pit 1 m 39.37 ftEffective length of pilot rods 450 mm 17.72 inDiameter of pilot rods 82,5 mm 3.25 inRetrievable pipe/effective length 450 mm 17.72 inMax. outside pipe diameter 280 mm 11.02 inMax. bore length (depends on soil conditions) 25 m 82.02 ft
SwitzerlandTRACTO-TECHNIK Schweiz AGRatihard 38253 DiessenhofenTel +41 79 820 38 [email protected]
United Kingdom TRACTO-TECHNIK UK Ltd10 Windsor RoadBedford MK 42 9SUTel +44 1234 342566Fax +44 1234 [email protected]
FranceTRACTO-TECHNIK France S.a.r.l. 1/3 Rue de la PrairieF-77700 Bailly RomainvilliersTél +33 1 60 42 49 40Fax +33 1 60 42 49 [email protected]
USATT TECHNOLOGIES Inc.2020 East New York StreetAurora, IL. 60502Tel +1 630 851 8200Fax +1 630 851 [email protected]
AustraliaTRACTO-TECHNIK Australia Pty Ltd.6 Devlan Street Mansfi eld, Qld 4122Tel +61 7 3420 5455Fax +61 7 3420 [email protected]
GermanyTRACTO-TECHNIK GmbH & Co. KG HeadquartersPaul-Schmidt-Straße 2 57368 Lennestadt Tel. +49 2723 808-0 Fax -180 [email protected]
TRACTO-TECHNIK Headquarters
TRACTO-TECHNIK Sister companies
TRACTO-TECHNIK Distributors
Presented by your TRACTO-TECHNIK partner:
MoroccoTRACTO-TECHNIK Afrique S.a.r.l.Route de Tamesna 4022Poste 2044, 12220 TamesnaTel +212 5 37 40 13 63 / 64Fax +212 5 37 40 13 [email protected]
WORLDWIDE
trenchless technology – simple & easy
BOR
01EN
V02
Editi
on 0
7/20
19Te
xt a
nd im
ages
sub
ject
to c
hang
e.