Precast Box Culvert Design Output Using Eriksson Culvert
64
10/14/2021 1 PRECAST BOX CULVERT DESIGN OUTPUT USING ERIKSSON CULVERT VERSION 5.11.0.0
Transcript of Precast Box Culvert Design Output Using Eriksson Culvert
10/14/2021 1
PRECAST BOX CULVERT DESIGN OUTPUT
USING ERIKSSON CULVERT
VERSION 5.11.0.0
Presenters
10/14/21 2
Wayne Hodge, PE• Rinker
Corey Haeder, PE• Forterra
Brian Barngrover, PE• Eriksson
The Goal• Compare program input and design output
– What is it telling us?– What is behind the curtain?
10/14/2021 3
The Challenge• 16’ Span x 8’ Rise Box • 2’ Fill (1.99)• HL93 Loading• AASHTO LRFD• No Skew• Thinnest Top Slab
Possible . . . ??
10/14/2021 4
Discussion Format• Parallel Comparison
– Program Input– Design Output
• Pre-Recorded• Poll Questions• Q/A at the end
– # on each slide– Enter # and ? in Chat
10/14/2021 5
Poll Question #1
10/14/2021 6
54321
10/14/2021 7
10/14/2021 8High Level Recap – “Up To Date”
10/14/2021 9
Quick Check of Rating
10/14/2021 10
10/14/2021 11
Same as the Design Output
10/14/2021 12
10/14/2021 13
10/14/2021 14
• “Design Mode” – program calculates starting steel design• “Analysis Mode” – user can customize steel per production preferences
10/14/2021 15
• AASHTO LRFD 5th, 6th, 7th, 8th or 9th available• STD Code, CSA and AREMA also available• “Method” only applies to STD code (ASD / LFD)
10/14/2021 16
Analysis Options: Consider internal water pressure: yes Check slenderness: no Use haunches in analysis model: yes Use haunches for critical sections: yes Extend critical sections: no Use max moment with max shear: yes Always distribute wheel load: yes Combine axle overlaps: yes Live load deflection criteria: 1 / 800 Limit LL distribution width if fill > 2 ft: no Limit LL distribution width if fill < 2 ft: yes Include impact on bottom slab: yes Automatically account for skew effects: no Use LRFD 12.10.4.2.4a-1: yes Always check iterative beta method: no
Static Loads: Soil equivalent fluid pressure, max: 60 Soil equivalent fluid pressure, min: 30
Live Loads: Include lane load: no Traffic direction: parallel
Reinforcement: Type: mesh Epoxy type: none
10/14/2021 17
• Precast or Cast-In-Place• US or Metric Units
10/14/2021 18
6” Top Slab –Starting Point
10/14/2021 19
Design Types: Four-sidedThree-sided
Three-sided Inverted Vertical Box
Support Types only apply to Three-sided
Length of a precast piece
10/14/2021 20
For Skew Angles – can be used to determine Parallel (<30 deg) or Perpendicular (>30 deg)Or
Choose Parallel / Perpendicular on Live Load Input Screen
10/14/2021 21
MoR Factors
LL Distr Factor
10/14/2021 22
Design Deficiencies appear if present.If design meets code – does not appear.
Poll Question #2
10/14/2021 23
54321
10/14/2021 24
16’ SPAN - include lane load
1.05
10/14/2021 25
Option –Trapezoidal
Reaction
Future –Flexible
Foundation
10/14/2021 26
10/14/2021 27
10/14/2021 28
10/14/2021 29
10/14/2021 30
10/14/2021 31
10/14/2021 32
10/14/2021 33
10/14/2021 34
10/14/2021 35
10/14/2021 36
10/14/2021 37
10/14/2021 38
10/14/2021 39
10/14/2021 40
10/14/2021 41
10/14/2021 42
10/14/2021 43
10/14/2021 44
10/14/2021 45
10/14/2021 46
Poll Question #3
10/14/2021 47
54321
10/14/2021 48
Try 12”
10/14/2021 49
10/14/2021 50
10/14/2021 51
10/14/2021 52
10/14/2021 53
Poll Question #4
10/14/2021 54
54321
10/14/2021 55How do we get this into AASHTOWare?
10/14/2021 56
10/14/2021 57
10/14/2021 58
10/14/2021 59
10/14/2021 60
What is really behind the Curtain?
10/14/2021 61
10/14/2021 62
10/14/2021 63
10/14/2021 64
Wayne HodgeRinker Materials6560 Langfield Road; Bldg 3Houston, TX [email protected]
Corey HaederForterra6655 Wedgwood Rd; Suite 130Maple Grove, MN [email protected]
Brian BarngroverEriksson Software5460 Ward Road; Suite 200Arvada, CO [email protected]
Thanks for your participation!
