PR6 D.E.M.S Network - Pinnacle Response · When a PR6 camera is connected to a PC running the...

1
PR6 D.E.M.S When a PR6 camera is connected to a PC running the D.E.M.S. sync application, any video on the device will be securely uploaded to the web application server. The video will then be queued to the transcode server for processing, and eventually stored in the video file storage. When a video is viewed, it is retrieved from storage by the web application server and is streamed to the user’s browser. All network communications are over TCP/HTTP port 80 and TCP/HTTPS port 443 (recommended). Note that alternative ports may be used with the appropriate configuration. The Digital Evidence Management Software (D.E.M.S.) solution is composed of two major parts: D.E.M.S. Sync utility The purpose of this component is to connect to the camera and securely offload and upload the video content. The utility is a lightweight application that will run on any standard Windows PC (certain hardware and software pre-requisites apply). The Sync Utility should be installed close to where the cameras are actually being used, i.e. in an office location that camera users return to at the end of each working day. The utility can be deployed in multiple locations, which suits a distributed office environment, or on multiple PCs in the same office if required. It can also be installed onto virtualised desktop applications, assuming these have access to the local USB port on the physical PC. D.E.M.S. Web Application. This application is used to securely store the video and provides all of the searching and viewing functions to users according to their permissions. It is deployed in one centralised location, which is either in the customer's own data centre or in the Cloud. If deployed on- premise, the web application is installed on one or more servers (depending on the overall capacity of the system) and is connected to disk storage to hold the video. Users connect to the application using a standard web browser. FOR FURTHER INFORMATION CONTACT [email protected] OR CALL A MEMBER OF OUR SALES TEAM ON 028 95 320 222

Transcript of PR6 D.E.M.S Network - Pinnacle Response · When a PR6 camera is connected to a PC running the...

Page 1: PR6 D.E.M.S Network - Pinnacle Response · When a PR6 camera is connected to a PC running the D.E.M.S. sync application, any video on the device will be securely uploaded to the web

PR6 D.E.M.SN E T W O R K

W I L S O N W E E K L Y | M A R C H 2 0 2 0 P A G E 1

When a PR6 camera is connected to a PC running the D.E.M.S. sync application, any video on the device will be securely uploaded to the web application server. The video will then be queued to the transcode server for processing, and eventually stored in the video file storage.

When a video is viewed, it is retrieved from storage by the web application server and is streamed to the user’s browser. All network communications are over TCP/HTTP port 80 and TCP/HTTPS port 443 (recommended). Note that alternative ports may be used with the appropriate configuration.

The Digital Evidence Management Software (D.E.M.S.) solution is composed of two major parts: D.E.M.S. Sync utility The purpose of this component is to connect to the camera and securely offload and upload the video content. The utility is a lightweight application that will run on any standard Windows PC (certain hardware and software pre-requisites apply). The Sync Utility should be installed close to where the cameras are actually being used, i.e. in an office location that camera users return to at the end of each working day. The utility can be deployed in multiple locations, which suits a distributed office environment, or on multiple PCs in the same office if required. It can also be installed onto virtualised desktop applications, assuming these have access to the local USB port on the physical PC.

D.E.M.S. Web Application. This application is used to securely store the video and provides all of the searching and viewing functions to users according to their permissions. It is deployed in one centralised location, which is either in the customer's own data centre or in the Cloud. If deployed on- premise, the web application is installed on one or more servers (depending on the overall capacity of the system) and is connected to disk storage to hold the video. Users connect to the application using a standard web browser.

FOR FURTHER INFORMATION CONTACT [email protected] OR CALL A MEMBER OF OUR SALES TEAM

ON 028 95 320 222