PowerPoint-Präsentation · Contents Introduction DO 160G: norm requirements up to level 3 AVI3000:...

AVI3000Indirect lightning test system L3+

The best just got better !

EMC PARTNER AG

Founded in 1994

Swiss private company, headquarters in Laufen

Largest choice of impulse generators

Market leader, recognized worldwide

Development, production and testing in house

Global representative network

EMC PARTNER - Largest range of impulse test equipment up to 100kV and 100kA

Contents

Introduction

DO 160G: norm requirements up to level 3

AVI3000: technical specification

AVI3000: calibration setup and test setup examples


Facts and figures


EMC Partner (90+ systems delivered for indirect lightning test L5): worldwide no. 1

Airbus, Boeing, Bombardier, AVIC, COMAC

NASA, Honeywell,

Rockwell Collins,

Goodrich (UTC),

Selenia, Aselsan,

Panasonic AviationTest labs TUV, NTS, IABG, Interspace

EMC Partner is # 1 worldwide in indirect lightning tests:

20+ years of experience and continuous improvement

Unique technology, highly appreciated

Full compliant and worldwide recognized tests

Accurate, reproducible and reliable results

Facts and figures


AVI3000: new test system for DO 160G, S22 and MIL STD 461G CS117


DO 160G, section 22 test requirements

Signal types:


Single stroke SS

Multiple stroke MS

Multiple Burst MB


Signal types: SS, MS, MB


AVI3000 generates all SS, MS, MB signals required in S22 (L3+)



Waveforms current and voltage, levels 1 – 3+

WF1 WF2 WF3

WF4 WF5 A WF6


Waveforms current and voltage


AVI3000 generates all waveforms required in S22 (L3+):

WF1, WF2, WF3, WF4, WF5A, WF6

DO 160G, section 22 test requirements for PIN and CI

AVI3000: all required waveforms and up to L3+


Test type Signal WF1 WF2 WF3 WF4 WF5A WF6

Pin injection

SS no req no req L3 L3 L3 no req

MS

no requirement

MB

Cable bundle

SS L3 L3 L3 L3 L3 no req

MS L3+ L3 L3 L3 L3 no req

MB no req no req L3 no req no req L3


Full compliance tests with EMC Partner system up to Level 3+


AVI3000 generates all waveforms required for

Pin Injection and Cable Bundle tests (L3+)

AVI3000: cutting-edge technology

Touch screen control, reduced system complexity

Sophisticated automation of calibration and test possible

Outstanding performance:

Subsequent strokes adjustable 0 – 100% from initial stroke

Synchronization up to 800 Hz for PIN (covers all power supplies in avionics field)



Touch screen with EPOS operating system (lifetime free upgrade)

Contextual help and explanatory diagrams


Unique new software for AVI3000


Lifetime upgrade at no extra charge

More generators controlled in parallel

DSO control

Sequence mode

Protocol

Norm library


Electronic polarity switch

Built-in AC/DC decoupler for pin injection test



Ultra-compact, all waveforms in one unit

Upgradable: slot for additional plug-ins



Only one coupler for all (CN-BT7: large aperutre 7 x 9 cm)

Minimum length of cable bundle: 40 cm



Solid state switching elements allow:

Accurate, highly reproducible, controllable pulses

PIN synchronisation up to 800 Hz

Long lifetime of equipment

No maintenance required

Safe to use




Requirement DO 160G S22

Pin Injection, WF3 (1 MHz), Level 3: 600V/24A

Performance of AVI3000

Pin Injection, WF3 (1 MHz), Maximum test level: 750V/30A




Pin Injection, WF4, Level 3: 300V/60A


Pin Injection, WF4, Maximum test level: 500V/100A




Pin Injection, WF5A, Level 3: 300A/300V


Pin Injection, WF5A, Maximum test level: 500A/500V




Cable Bundle SS/MS, WF1, Level 3: 600A


Cable Bundle SS/MS, WF1, Maximum test level: 850A (L3+)




Cable Bundle SS/MS, WF2, Level 3: 300V


Cable Bundle SS/MS, WF2, Maximum test level: 1600V (L5)




Cable Bundle SS/MS, WF3 1 MHz, Level 3: 600V

Cable Bundle MB, WF3 1 MHz, Level 3: 360V


Cable Bundle SS/MS, WF3 1 MHz, Maximum test level: 1700V (L4+)

Cable Bundle MB, WF3 1 MHz, Maximum test level: 600V




Cable Bundle SS/MS, WF3 10 MHz, Level 3: 600V

Cable Bundle MB, WF3 10 MHz, Level 3: 360V


Cable Bundle SS/MS, WF3 10 MHz, Maximum test level: 1100V

Cable Bundle MB, WF3 10 MHz, Maximum test level: 800V




Cable Bundle SS/MS, WF4, Level 3: 300V


Cable Bundle SS/MS, WF4, Maximum test level: 1600V(L5)




Cable Bundle SS/MS, WF5A, Level 3: 1000A


Cable Bundle SS/MS, WF5A, Maximum test level: 1600A(L3+)




Cable Bundle MB, WF6, Level 3: 30A


Cable Bundle MB, WF6, Maximum test level: 75A(L4)



Requirement MIL STD 461G, CS117

There are two test levels: for internal and external equipment

Test levels from DO160G S22 and MIL STD 461G CS117 are different


AVI3000 meets all test levels for internal equipment (CS117),

besides L3 from DO160G S22



Pin Injection, WF5A, calibration setup U



Pin Injection, WF5A, calibration setup I



Pin Injection, WF5A, test setup



Cable Bundle, WF5A, calibration setup U



Cable Bundle, WF5A, calibration setup I



Cable Bundle, WF3 1 MHz, calibration setup U



Cable Bundle, WF3 1 MHz, calibration setup I



Cable Bundle, WF3 1 MHz, test setup

I-PROBE-MB-P1

Current probe

V-PROBE-SI

Diff voltage probe

Accessories for AVI3000


DN-LISN160-32

EUT supply decoupling

SHUNT0E1

Calibration load (coupler)

DO 160G, section 22

Competence and assistance from EMC Partner


Guidance and advice before purchase

Installation, training and support after delivery

Latest advancements available

(EMC Partner is active in norm committees)

www.emc-partner.com


PowerPoint-Präsentation · Contents Introduction DO 160G: norm requirements up to level 3 AVI3000:...

Documents

Transcript of PowerPoint-Präsentation · Contents Introduction DO 160G: norm requirements up to level 3 AVI3000:...