Powering Axis Network Cameras with Power over LAN.
-
Upload
kayleigh-kipps -
Category
Documents
-
view
221 -
download
0
Transcript of Powering Axis Network Cameras with Power over LAN.
Powering Axis Network Cameras with Power over LAN™
Main Messaging
Network video from anywhere without the need for power outlets!
What is Power over LAN?
Technology for combining Power & Data over standard LAN cabling infrastructure
Safe, reliable way to save installation costs
Standard solution – IEEE 802.3af compliant
300ft (100m) range
Also known as:PoL
Power over Ethernet - PoE
Inline PowerActive Ethernet
What is Power over LAN?
Power (48V, 15.4W) is only activated for authenticated
compatible terminals.
Compatible with standard Category 5 cabling
infrastructure – no need to replace cables, patch-panels,
RJ-45 outlets, etc.
Safe solution – Power is automatically blocked to legacy
Ethernet devices (i.e. laptops, NICs, switches, etc.)
Systems are protected against overloads and short-
circuits
Axis/ PowerDsine Power over LAN™ Solutions
• 12,6 & 1 port Mid-spans – for all types of installations
• 1U rack mount for 12 & 6 port versions
• 802.3af compatible – future proof solution
Powering 12V Network Cameras
• Use the 12V Active Splitter with cameras or equipment that requires 12V, and is not yet POL enabled.
12V Power
Data
Active Splitter
Power over LAN Midspan
Network Camera
Simpler, more Cost effective Installation
Removal of the AC outlets dramatically reduces cost of the deployment.
No need for expensive electricians, deployment by IT personnel.
No adaptors – higher reliability of installation
Fast installation time and integration of cameras
Simplified site planning, enabling easy addition or relocation of a camera to get complete coverage.
The Power over LAN Advantage for Network Cameras
A Robust Security Network – a Must
Only a port with POL enabled devices will be powered
Will not damage non-POL devices such as NIC Cards, LAN Hubs and other peripherals
Eliminates accidental disconnection of Power to camera
Better survivability in the tough industrial floor
Can allow closing of the camera in an isolating box
Overload & short circuit protections
The Power over LAN Advantage for Network Cameras
A backup Security Network – a Must Continues operation during power failures by simple UPS backup
of the POL Midspan.
Utilize existing network UPS
UPS
The Power over LAN Advantage for Network Cameras
Power over LAN Business Case – from the WLAN world
Wireless Installer Saves Customer over $5,000 byusing Power over LAN
Site Application: Warehouse/Watch Factory
Application: 20 Access Points mounted 32ft high
Installation of Duplex Outlets/conduit: $432 each
Electrician Cost: $8,640
POL Cost : 6 Port units x 4 @ $800 = $3200
Savings: $5,440
Frequently Asked Questions
Which Axis Products can the Power over LAN midspan work with?
2100, 2110, 2120, 2420, 2400, 2401 and 9010.Can devices be damaged by connecting to the Power Hub?
No, only ports that terminate with PoE enabled devices will be powered. Therefore there is no need to manage individual cables or jacks.
No concerns about employees carelessly swapping cables No damage to Ethernet switch in case of input/output careless
swap No damage to legacy products on the network Protecting 1000BaseT Endpoints, ATM, ISDN, T1/E1 & POTS
Devices
Why use Power over LAN™ Solution?
Saves our Customer Money
Safer, more Reliable Solution