PowerBench™ Interactive Whiteboard Architect Analyze · Solutions from Source to Point of Load...
Transcript of PowerBench™ Interactive Whiteboard Architect Analyze · Solutions from Source to Point of Load...
Solutions from Source to Point of LoadVicor provides power solutions from source to point of load. Our family of products provide a broad breadth of choices from semiconductor power solutions to complete power modules. This brochure shows features of our newer products. For a full line of our product solutions from AC to point of load, visit our website at vicorpower.com.
Power Component Design MethodologyVicor’s Power Component Design Methodology is a predictable, reliable methodology that enables power systems designers to deliver designs that are high in power density, efficient and are economical. Utilizing Vicor’s online tools, power system designers select from an extensive portfolio of proven Vicor power components to architect, optimize and simulate their complete power system, all the way from their input sources to their points of load. This innovative approach to power system design delivers fast time-to-market and state-of-the-art performance while minimizing the possibility of last minute surprises and delays that so often occur with conventional or custom design methodologies.
PowerBench Tool Interactive Whiteboard A Simple & Fast Way to Design . . . IFCAC-DC PFC Universal Input
PFM. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1DC-DC Isolated Regulated DCM . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Cool-Power PI31xx . . . . . . . . . . . . . . .3 Isolated & Non-Isolated Fixed-Ratio BCM . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Non-Isolated Regulated Buck and Buck-Boost Cool-Power PI33xx, PI34xx. . . . . . . . .5
Products in this Brochure
PowerBench™ Interactive Whiteboard
Choose & Createn Enter your requirements to get solutions based on your specific needs.
n Easily sort, filter, and compare your results, and view any of your solutions in the Whiteboard.
n Add predefined solutions that solve industry specific issues, then go in and change
parameters on products.
Architectn Choose the Whiteboard from our tools menu. Here you can use the
product pallet to find specific Vicor products that fit your needs.
n Easily build your own solution from scratch.
n Once you have completed your design you can save it and share it.
Analyzen Analyze the efficiency of your design once supply, load, and operating
temperatures have been specified. The information will be calculated
and presented.
Experience a Simple and Fast Way to Design Power Systems
Isolated & Regulated Converter with PFC for AC-DC Systems
Features & Benefits
n Up to 400 W
n Up to 92% efficiency
n Active Power Factor Correction Exceeds 0.95 at most line/load conditions
n Chassis mount or PCB mounting options
n Available temperature grades – C-Grade: -20 to 100°C – T-Grade: -40 to 100°C
n Small size & low profile
n Allows designers to minimize the space needed for their applications
n Double sided thermal housing simplifies thermal design challenges
n Companion AIM in a VIA package provides rectification and EMI filtering for use in Class B power systems
n Product dimensions – PFM: 111 x 35.5 x 9.3 mm – AIM: 44.6 x 35.5 x 9.3 mm
PFM™ in a VIA Package
1
Applications
n Networking
n Telecom
n LED lighting
n Bench-top equipment
n Industrial AC-DC power systems
Part Numbering
Part Number Vout Max Power Mounting Style Companion AIM
PFM4414VB6M24D0T00 24 400 Chassis AIM1714VB6AMC7D5T00
PFM4414BB6M24D0T04 24 400 Board - Short AIM1714BB6AMC7D5T04
PFM4414BB6M24D0T08 24 400 Board - Long AIM1714BB6AMC7D5T08
PFM4414VB6M48D0T00 48 400 Chassis AIM1714VB6AMC7D5T00
PFM4414BB6M48D0T04 48 400 Board - Short AIM1714BB6AMC7D5T04
PFM4414BB6M48D0T08 48 400 Board - Long AIM1714BB6AMC7D5T08
AIM VIA
PFM VIA
Product DescriptionThe PFM is the lowest profile AC-DC solution in the market. Vicor’s VIA package enables designers to efficiently package power into their system thermal management solutions. Unlike the competition which offers solutions with twice the width and 3x the height, these slim line converters can do the same job in less space.
3.3 V
5 V
24 V
12 V
Cool-PowerZVS Buck
Cool-PowerZVS Buck
Cool-PowerZVS Buck
PFMAIM
Single-Phase AC84 – 264 VAC
TMOV24 VDC
Basic Application
24 VDC
16 V
5 V
48 V
12 V
(2)
DCM
DCM
Cool-Power ZVS Bucks
Cool-Power ZVS Bucks
5
DC-DC Isolated Regulated Converter
Featuresn Nominal input voltages of 300, 290, 270, 48, 28, 24 V
n Output voltages cover 48, 36, 28, 24, 15, 12, 5 V outputsn High power density: up to 1,244 W/in3 in a 1.67 in2 footprint (76 W/cm3 in a 10.77 cm2)n Output power: up to 600 Wn High efficiency: over 93%n Isolation: up to 4,242 VDC
n Array eight units with no power deratingn Double-sided cooling
2
DCM™
Applicationsn Industrial and process control
n Defense/Aerospace aircrafts requiring 270 and/or 28 VDC
n Railway, transportation
n Hybrid electric vehicle
n Capital equipment
n Server/telecom/datacom equipment
16 - 50 VDC 3.3 V
90 WTotal
28 V
5.0 V
2.5 V
150 WTotal
60 WTotal
(3)
(3)
(2)
VI ChipDCM
Cool-Power ZVS Bucks
Cool-Power ZVS Bucks
Cool-Power ZVS Bucks
MIL-COTS – 28 VIndustrial – Low Voltage
ApplicationNominalInput (V)
Package Size
Power (W) by Nominal Output Voltage (V)
5 12 13.8 15 24 28 36 48
Industrial HV 300 4623 400 600 500 500
Telecom/Datacom 48 3623 160 320 320 320 320 320
Industrial LV 24 3623 180 320 320 320 320 320 320
EV/HEV 290 4623 600
MIL-COTS 270 4623 250 500 500 500 500
MIL-COTS 28 3623 180 320 320 320 320 320
Product Table (Available Versions) = Also Available in VIA package
Device Vin Package Type
Output Voltage x10
Temperature Grade
Output Power Rev Package
Size Version
DCM 290 P 138 T 600 A 4 0
DCM
MDCM = (MIL-COTS)
48 (36 – 75)24 (18 – 36)290 (160 – 420)300 (180 – 420)
270 (160 – 420)28 (16 – 50)
P = ChiP Through-Hole
120 = 12 V138 = 13.8 V150 = 15 V240 = 24 V280 = 28 V360 = 36 V480 = 48 V
T = -40 to 125°CM = -55 to 125°C
180 = 180 W320 = 320 W400 = 400 W500 = 500 W600 = 600 W
A 4 = 46235 = 3623
0 = Analog
DCM in ChiP Packaging Part Numbering
Product
Function
Package
Length
Package
Width
Package
TypeInternal Reference
Product Grade
(Case Temperature)Option Field
D C M 37 14 x D2 H 26 D7 y z z
DCM = DC-DC
ConverterInches x 10 Inches x 10
B = Board VIA
V = Chassis VIAInternal Reference
C = -20 to 85°CT = -40 to 85°C
01 = Chassis/Analog 05 = Short Pin/Analog 09 = Long Pin/Analog
DCM in VIA Packaging Part Numbering
3
DC-DC Isolated Regulated Converters
Features n Complete isolated DC-DC with zero-voltage switching modulen 50 W / 60 W output power
n Efficiency up to 89% (dependent upon converter model)
n Output voltage sensing without opto coupler use for higher reliability
n Three input voltage ranges for communication, industrial, rugged/M-grade applications
n Communication converters have max peak input voltage of 100 V/100 ms (non-operating)
n Surface mount 0.87” x 0.65” x 0.265” high density package
n 900 kHz switching frequency, minimizes input filtering and reduces output capacitance
n On/Off control, positive logic ENABLE
n Wide trim range +10/-20% Trim
n Temperature Monitor (TM) & Over-Temperature Protection (OTP)
n Input UVLO & OVLO and output OVP
n Over current protection with auto restart
n Adjustable soft-start
n 2,250 VDC input to output isolation
Applications
n Networking
n Industrial
n Rugged defense applications
n Space constrained system
n Isolated, board-level power
Cool-Power Input Output IOUTMax Set Range
Communications (-40°C to 125°C)
PI3101-00-HVIZ36 – 75 Vin
3.3 V 3.0 to 3.6 V 18 A
PI3105-00-HVIZ 12 V 9.6 to 13.2 V 5 A
PI3110-01-HVIZ 41 – 57 Vin 18 V 16.2 to 19.8 V 3.3 A
Industrial (-40°C to 125°C)
PI3109-01-HVIZ18 – 36 Vin
5 V 4.0 to 5.5 V 10 A
PI3106-01-HVIZ 12 V 9.6 to 13.2 V 4.2 A
M-Grade (-55°C to 125°C)
PI3108-00-HVMZ
16 – 50 Vin
3.3 V 3.0 to 3.6 V 10 A
PI3109-00-HVMZ 5 V 4.0 to 5.5 V 10 A
PI3106-00-HVMZ 12 V 9.6 to 13.2 V 4.2 A
PI3111-00-HVMZ 15 V 12 to 16.5 V 3.3 A
ChfCbulkCssVin Rload
Cout
Vout
+
Lin
Input Fuse Input Filter
Optional
Picor Cool-Power®
DC-DC Converter
Basic Application
Cool-Power® DC Converter
4
DC-DC Non-Isolated Fixed-Ratio Converters
Featuresn High power density: Up to 3,532 W/in3
n Reversible
n Output power: Up to 2,400 W
n High efficiency: 97.9%
n Fast response time
n Low noise
n Innovative ChiP package
n Array units to create higher power conversion systems
n Double-sided cooling
NBM® Bus Converter Modules
12 VDC
60 V
12 V
NBM NBM
Part Numbering
Model Number Input Voltage (V)
Output Voltage (V)
Output Power (W)
Output Current (A)
Package Type
Control Interface
NBM6123x46C15A6yzz 36 – 46 12 – 15.3 2400 160 6123 Analog
NBM6123x60E12A7yzz 36 – 60 7.2 – 12 2000 170 6123 Analog
DC-DC Isolated Fixed-Ratio Converters
BCM® Bus Converter Modules
48 VDC5 V
5 V
12 V
12 V
12 V
5 V
5 V
5 V
5 V
Cool-PowerZVS Buck
Cool-PowerZVS Buck
Cool-PowerZVS Buck
Cool-PowerZVS Buck
Cool-PowerZVS Buck
Cool-PowerZVS Buck
BCM
BCM
BCM
380 VDC20 – 55 V
LOAD
48 V
380 VDC PRM
PRM
BCM
BCM
VTM LOAD48 V 0.7 – 55 V
LOAD
LOAD
PMBusTM
48 V
DigitalIsolator
DigitalSupervisor
SystemProcessor
26 – 55 V
380 VDC BCM
ZVS Buck
For BCM Part Numbering, go to www.vicorpower.com
Featuresn 98% peak efficiency
n Parallel operation for multi-kW arrays
n Protection features – Undervoltage and overvoltage lockout – Overcurrent protection – Short circuit protection
– Over-temperature protection
n Analog or digital control interface versions
n The High Voltage BCMs support 260 – 410 VIN systems with 48 or 12 V outputs and capable of up to 1.75 kW
n The Low Voltage BCMs support modern 48 V systems (up to 36 – 60 V input range) with a range of power capabilities (1.95 kW to 120 W)
5
DC-DC Non-Isolated Regulated Buck-Boosts and Bucks
Cool-Power® ZVS Regulators
ZVS Series Featuresn High efficiency
– >98% peak Buck-Boost
– >96% peak 24 VIN to 12 V Buck
– Light load and full load high efficiency performance
n High density 10 x 10 x 2.5 and 10 x 14 x 2.5 mm Sip packaging
n -40°C to 125°C operating range (Tj)
n Fast transient response
n Paralleling and single wire current sharing
n Frequency synchronization/ interleaving
– Input over/undervoltage lockout
– Output overvoltage protection (OVP)
– Over temperature protection (OTP)
ZVS Buck-Boost Featuresn General purpose and VTM compatible Buck-Boost Regulator
n High-side current sense amplifier
n General purpose amplifier
ZVS Buck Featuresn Optional I2C functionality & programmability
n Wide operating ranges
– 8 – 36 VIN, 8 – 18 VIN and 36 – 60 VIN
– Wide VOUT 1 – 16 V and 2.5 – 12 V
n Simple to use; fast development time
– Internal compensation – few external components
– No additional design or additional settings required
ZVS Buck-Boost Regulator Input Output Power PackagePart Number Voltage Range Max (LGA)
PI3749-00-LGIZ 16 V – 34 V 12 V – 34 V 200 W 10 x 14 mm
ZVS Buck-Boosts with PRM Function
PI3751-00-LGIZ 38 V – 60 V 38 V – 50 V 200 W 10 x 14 mm
PI3755-01-LGIZ 38 V – 60 V 28 V – 54 V 100 W 10 x 10 mm
ZVS Buck Regulator Input Output Power PackagePart Number[a] Voltage Range Max (LGA)
PI3301-x0-LGIZ 8 – 36 V 2.3 – 4.1 V 10 A 14 x 10 mm
PI3301-x1-LGIZ 8 – 36 V 2.3 – 4.1 V 15 A 14 x 10 mm
PI3302-x0-LGIZ 8 – 36 V 3.3 – 6.5 V 10 A 14 x 10 mm
PI3302-03-LGIZ 11 – 36 V 3.3 – 6.5 V 15 A 14 x 10 mm
PI3303-x0-LGIZ 17.4 – 36 V 6.5 – 13.0 V 8 A 14 x 10 mm
PI3305-x0-LGIZ 20.4 – 36 V 10 – 16 V 8 A 14 x 10 mm
PI3311-x0-LGIZ 8 – 36 V 1.0 – 1.4 V 10 A 14 x 10 mm
PI3311-x1-LGIZ 8 – 36 V 1.0 – 1.4 V 15 A 14 x 10 mm
PI3312-x0-LGIZ 8 – 36 V 2.0 – 3.1 V 10 A 14 x 10 mm
PI3312-x1-LGIZ 8 – 36 V 2.0 – 3.1 V 15 A 14 x 10 mm
PI3318-x0-LGIZ 8 – 36 V 1.4 – 2.0 V 10 A 14 x 10 mm
PI3318-x1-LGIZ 8 – 36 V 1.4 – 2.0 V 15 A 14 x 10 mm
PI3420-00-LGIZ 8 – 18 V 1.0 – 1.4 V 15 A 14 x 10 mm
PI3421-00-LGIZ 8 – 18 V 1.4 – 2.0 V 15 A 14 x 10 mm
PI3422-00-LGIZ 8 – 18 V 2.0 – 3.1 V 15 A 14 x 10 mm
PI3423-00-LGIZ 8 – 18 V 2.3 – 4.1 V 15 A 14 x 10 mm
PI3424-00-LGIZ 8 V – 18 V 3.3 – 6.5 V 15 A 14 x 10 mm
PI3542-00-LGIZ 36 V – 60 V 2.2 – 3.0 V 10 A 10 x 10 mm
PI3543-00-LGIZ 36 V – 60 V 2.6 – 3.6 V 10 A 10 x 10 mm
PI3545-00-LGIZ 36 V – 60 V 4.0 – 5.5 V 10 A 10 x 10 mm
PI3546-00-LGIZ 36 V – 60 V 6.5 – 14.0 V 9 A 10 x 10 mm[a] -x indicates the I2C option; Replace -x with “-2” for I2C, or “-0” for no I2C option
85 – 264 VAC 48 VDC
5 V
3.3 V
12 V
2.5 V
Cool-PowerZVS Buck
Cool-PowerZVS Buck
Cool-PowerZVS Buck
Cool-PowerZVS Buck
PFM
Vicor Corporation Corporate Headquarters25 Frontage RoadAndover, MA 01810
Phone (US): 1 800 735 6200Europe: 00 800 (8426 7000)www.vicorpower.com
Rev 2.7 12/2015
Enabling Our Customers’ Competitive AdvantageAt Vicor, we enable customers to efficiently convert and manage power from the wall plug to point of load.
We master the entire power chain with the most comprehensive portfolio of high efficiency, high-density, power distribution architectures addressing a broad range of performance-critical applications.
Vicor’s holistic approach gives power system architects the flexibility to choose from modular, plug-and-play components ranging from bricks to semiconductor-centric solutions.
By integrating our world-class manufacturing and applications development, we can quickly customize our power components to meet your unique power system needs.
Focus Performance-Centric Industries/Applications
Communications/Computingn HVDC solutions at >2,000 W/in3
n 98%+ efficient IBCs
n Smallest, most efficient 48 V to processor/memory (VR12.x, etc.)
n Complete LTE repeater power
> 400 VDC Power Distribution
> Datacom
> Netcom
> Telecom Infrastructure
> Data Centers
> High Performance Computing
> Network Servers
Industrialn Pioneer and leader in HVDC
- 380 V infrastructure
- Energy storage
- 600/800 V Hybrid earth moving
n Rail industry leader
n Test & measurement cost leader
n Field-proven in harsh environments
> ATE
> Lighting
> Process Control
> Transportation
Automotiven 4X smaller, lighter 380 – 12 V auxiliary power
n Bi-directional powertrains
n Energy-recovery systems
> Electric Vehicles
> Hybrid Vehicles
Defense/Aerospacen MIL-COTS industry leader
n Land, sea, air: combat-proven
n 8 – 10X smaller, lighter airborne power
n Power components and turn-key solutions
> Aircraft Test Equipment
> Ground Vehicles
> Radar
> Telemetry
> Unmanned Vehicles