Power Ppt Vacuum and Dusting Purpose and Process
-
Upload
mario-wallace -
Category
Documents
-
view
32 -
download
0
description
Transcript of Power Ppt Vacuum and Dusting Purpose and Process
CAMPUS ENVIRONMENTAL SERVICES
Vacuum and Dusting Process
CEVS VACUUM PROCESS
• State the purpose for vacuuming and the type of vacuum required in a health care environment
• Describe the vacuuming requirements for outpatient and non-patient areas at UAMS
• List the 8 steps of vacuuming at UAMS
• Explain the vacuuming day requirements and the days
• Demonstrate the TPM system for checking in/out a vacuum
• Determine how to gage vacuuming cleaning levels in outpatient and non-patient areas
Objectives
Testing
Instructions
When you have completed the test, select one of three buttons below. Finish Later: if you want to returnGrade Test: if you are satisfied with you choicesCancel: if you want to start over.
CEVS VACUUM PROCESS
Navigation Instructions
Click the arrow to the right of the slide move the slide forward. Click the arrow on the left side to move to the previous slides.
CEVS VACUUM PROCESS
Navigation Instructions
Click the Post-Test to access the test.
CEVS VACUUM PROCESS
Hepa
Vacuums
HEPA vacuum filters trap small particles that may cause problems for allergy sufferers and others with health problems.
CEVS VACUUM PROCESS
Non Patient Areas
Non Patient areas
consist of offices, Labs,
classrooms, and any
area where patients are
not seen or treated.
Where to use a HEPA Vacuum?
CEVS VACUUM PROCESS
Know Your Area
Patient Area Non Patient Area
CEVS VACUUM PROCESS
CEVS initiates campus wide vacuum dusting days every Tuesday & Thursday as outlined in our SLA.
Remember to periodically dust from top down
CEVS VACUUM PROCESS
A Clean Neat
Space
When workers leave their offices at the end of the day, a cleaning crew typically comes in to tidy and freshen up the place for the next day.
Business offices have high expectations for the appearance and cleanliness of their domain.
CEVS VACUUM PROCESS