Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.
-
Upload
archibald-mccarthy -
Category
Documents
-
view
222 -
download
3
Transcript of Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.
![Page 1: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/1.jpg)
Power Plant Construction and QA/QC
Section 1.9– Biomass Energy
Engineering Technology Engineering Technology DivisionDivision
![Page 2: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/2.jpg)
2
Overview
• Introduction
• Resource Availability
• Fuel Properties
• Moisture
• Composition
• Size and Density
• Energy Plants
Section 1.9– Biomass Energy
![Page 3: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/3.jpg)
3
Introduction
Section 1.9– Biomass Energy
Energy Production from biological waste material
![Page 4: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/4.jpg)
4
Resource Availability
Section 1.9– Biomass Energy
![Page 5: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/5.jpg)
5
Fuel Properties
Section 1.9– Biomass Energy
MOISTURE CONTENT - A low moisture level in the fuel is usually preferable because high-moisture fuels burn less readily and provides less useful heat per unit mass. Extremely dry fuel can cause problems due to dust.
![Page 6: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/6.jpg)
6
Section 1.9– Biomass Energy
Fuel Properties
COMPOSITION - The three most significant compositional properties are (1) ash content, (2) susceptibility to slagging and fouling and (3) percent volatiles.
![Page 7: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/7.jpg)
7
Section 1.9– Biomass Energy
Fuel Properties
FUEL SIZE and DENSITY - The size and density of the biomass fuel particles affects the burning characteristics of the fuel. Fuel size dictates the type of handling equipment that is used.
![Page 8: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/8.jpg)
8
Energy Plants
Section 1.9– Biomass Energy
Economy
• Fuel Source
• Fuel Properties
• Fuel Cost
![Page 9: Power Plant Construction and QA/QC Section 1.9– Biomass Energy Engineering Technology Division.](https://reader030.fdocuments.net/reader030/viewer/2022032606/56649eb45503460f94bbbcfe/html5/thumbnails/9.jpg)
9
Questions?
Section 1.9– Biomass Energy