Power Pick Global -...
Transcript of Power Pick Global -...
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- © 2011 All rights reserved. Copyright by Kardex Software GmbH, D-This document - even partly - must not be printed and/or copied without the agreement of format and content is subject to change without special announcement.All trademarks in this document are property of the respective
Power Pick Global
Power Pick GlobalMobile Devices
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
-76744 Wörth, Germany. must not be printed and/or copied without the agreement of Kardex Software GmbH
format and content is subject to change without special announcement. All trademarks in this document are property of the respective owner, even though they are not extraordinarily marked.
Power Pick Global
Power Pick Global
Mobile Devices
Version 3.1
Kardex Software GmbH. Changing in
owner, even though they are not extraordinarily marked.
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
Date Version
12 February 2010 0.1
22 March 2010 2.1
22 March 2010 2.1
18 August 2010 2.1
10. June 2011 2.3
15. Mai 2012 3.1
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Revision History
Version Description
Technical description to use the mobile
solution
The document is prepared for release 2.1
Figure 7 updated
Figures updated
Figures updated and description adjusted
The document is prepared for release 3.1
Rev. Date:
8.16.2010
Page 2 of 23
Author
N.Verzano
A.Jamalian
N.Verzano
N. Verzano
N. Verzano
S. Reichert
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
1. Introduction
1.1 Installation
2. Prerequisites to use PP.Mobile2 on a mobile device with Power Pick Global
2.1 Technological Background how PP.Mobile2 works
2.2 Start the services on the workstation (PC/Server)
2.3 Network settings for windows mobile
3. Working with PP.Mobile2
3.1 Entry screen of PP.Mobile2
3.2 Set up the CEU
3.3 Set up the Language
3.4 Log in to PowerPick Global
3.5 Main Screen
3.6 Manual flow
3.7 Order managed flow
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Table of Contents
Prerequisites to use PP.Mobile2 on a mobile device with Power Pick Global
Technological Background how PP.Mobile2 works
ervices on the workstation (PC/Server)
Network settings for windows mobile
Entry screen of PP.Mobile2
Log in to PowerPick Global
Rev. Date:
8.16.2010
Page 3 of 23
4
4
4
5
5
6
8
8
9
10
11
12
13
16
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
1. Introduction
PP.Mobile2 is a mobile client of Power Pick Global and can be used on windows mobile platforms with at least
Windows Mobile 6.5 and .Net Compact Framework 3.5 installed
Motorola/Symbol has been used.
1.1 Installation
1st: Install .Net Compact Framework 3.5 on the device with Windows Mobile 6.5 as OS
2nd
: Manually copy the PP.Mobile2.cab f
Center (Windows 7)
3rd
: Install PP.Mobile2 by clicking the PP.Mobile
2. Prerequisites to use
• Device with Windows Mobile 6.5
• .Net Compact Framework 3.5 installed on the device
• Accessible Cross Enterprise Unit (CEU) through network connection
• Appropriate license
• Proper settings
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Power Pick Global
is a mobile client of Power Pick Global and can be used on windows mobile platforms with at least
Compact Framework 3.5 installed. As the reference product the device MC3190 from
: Install .Net Compact Framework 3.5 on the device with Windows Mobile 6.5 as OS
.cab file to the device – either with ActiveSync or Window Mobile Device
by clicking the PP.Mobile2.cab and confirm the popup dialogs (directly on the device).
Prerequisites to use PP.Mobile2 on a mobile device with Power Pick Global
6.5
.Net Compact Framework 3.5 installed on the device
Accessible Cross Enterprise Unit (CEU) through network connection
Figure 1: Network setup to use PP.Mobile
Rev. Date:
8.16.2010
Page 4 of 23
is a mobile client of Power Pick Global and can be used on windows mobile platforms with at least
reference product the device MC3190 from
either with ActiveSync or Window Mobile Device
(directly on the device).
on a mobile device with Power Pick Global
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
2.1 Technological Background how PP.Mobile
PP.Mobile uses Web Services of PowerPick Global to process orders or get information from warehouses. The
following figure shows the current implementation and curre
2.2 Start the services on the workstation (PC/Server)
It is required to provide at least one Cross Enterprise Unit (CEU) a mobile device can connect to. Install Powerpick
Global on a workstation that is accessible through the internet and intranet respectively.
of the workstation and the port number of the CEU service (e.g.: myhost:1353). The port number can be changed in
the System Configuration of the PP.Win client as shown in the following figure.
Figure 3: Parameters for the CEU can be changed in the
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Technological Background how PP.Mobile2 works
PP.Mobile uses Web Services of PowerPick Global to process orders or get information from warehouses. The
following figure shows the current implementation and currently available web services.
Figure 2: Currently available web services
Start the services on the workstation (PC/Server)
It is required to provide at least one Cross Enterprise Unit (CEU) a mobile device can connect to. Install Powerpick
Global on a workstation that is accessible through the internet and intranet respectively. Keep in mind
nd the port number of the CEU service (e.g.: myhost:1353). The port number can be changed in
.Win client as shown in the following figure.
: Parameters for the CEU can be changed in the System Configuration
Rev. Date:
8.16.2010
Page 5 of 23
PP.Mobile uses Web Services of PowerPick Global to process orders or get information from warehouses. The
It is required to provide at least one Cross Enterprise Unit (CEU) a mobile device can connect to. Install Powerpick
Keep in mind the IP address
nd the port number of the CEU service (e.g.: myhost:1353). The port number can be changed in
System Configuration
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
2.3 Network settings for windows mobile
A network connection needs to be set up to
figures show how to set up the mobile device to get connected with the internet/intrane
Figure 4
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Network settings for windows mobile
A network connection needs to be set up to establish a connection to the Cross Enterprise Unit.
figures show how to set up the mobile device to get connected with the internet/intranet.
4: Select Connections to get to the network settings
Figure 5: Select Set up my proxy server
Rev. Date:
8.16.2010
Page 6 of 23
establish a connection to the Cross Enterprise Unit. The following
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
Figure
Figure 6 shows how to make the internet or rather the intranet accessible. If proxy setting is necessary it
can also be set on this screen.
provided by the network administrator.
The wireless configuration may vary from manufacturer to manufacturer! Please
refer to the manual of the device!
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Figure 6: Check This network connects to the Internet
shows how to make the internet or rather the intranet accessible. If proxy setting is necessary it
can also be set on this screen. Further credentials to access the internet or rather intranet needs to be
provided by the network administrator.
The wireless configuration may vary from manufacturer to manufacturer! Please
refer to the manual of the device!
Rev. Date:
8.16.2010
Page 7 of 23
shows how to make the internet or rather the intranet accessible. If proxy setting is necessary it
access the internet or rather intranet needs to be
The wireless configuration may vary from manufacturer to manufacturer! Please
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3. Working with PP.Mobile
Once the network connection has been established and PP.Mobile
get started.
3.1 Entry screen of PP.Mobile
Every user who wants to use PP.Mobile
account to get access to PowerPick Global
figures show how to set up the device to get a permitted access to a CEU.
Figure 7: The start up screen shows no
If there is no CEU set in the settings or the provided CEU is not available the entry screen of the application looks
like Figure 7. The menu button visible but not enabled. Therefore the user cannot process any
PowerPick Global. If the settings have been provided properly and the CEU is available the
blue color (and the log in screen start automatic
No connection to CEU.
Connected to CEU, but user not yet logged on.
Connected to CEU and user logged on.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Working with PP.Mobile2
connection has been established and PP.Mobile2 has been installed on the device it can be used to
Entry screen of PP.Mobile2
Every user who wants to use PP.Mobile2 on a mobile device needs to have at least a valid
Global. It is not possible to create an account with PP.Mobile
figures show how to set up the device to get a permitted access to a CEU.
: The start up screen shows no available services (red information bar)
If there is no CEU set in the settings or the provided CEU is not available the entry screen of the application looks
utton visible but not enabled. Therefore the user cannot process any
If the settings have been provided properly and the CEU is available the
blue color (and the log in screen start automatically).
No connection to CEU.
Connected to CEU, but user not yet logged on.
Connected to CEU and user logged on.
Rev. Date:
8.16.2010
Page 8 of 23
has been installed on the device it can be used to
a valid PowerPick Global
with PP.Mobile2. The following
(red information bar)
If there is no CEU set in the settings or the provided CEU is not available the entry screen of the application looks
utton visible but not enabled. Therefore the user cannot process any functions of
If the settings have been provided properly and the CEU is available the information bar has a
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.2 Set up the CEU
Figure
PP.Mobile2 needs a CEU setting to access the PowerPick Global web services
host IP address of the CEU and the port number defined in the System Configuration for CEU web services in
PP.Win. After providing a station name which is comparabl
PowerPick Global the Test button can be
Test button , open internet explorer to test the http connection to the CEU
Test button, status not yet tested.
WebService test connection to the CEU.
Test button, status test was not successful.
WebService test connection to the CEU.
Test button, status test was successful.
WebService test connection to the CEU.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Figure 8: CEU needs to be set in the CEU settings form
setting to access the PowerPick Global web services. The credentials for this setting is a
and the port number defined in the System Configuration for CEU web services in
name which is comparable with the station name defined in the warehouse in
est button can be invoked to verify the accessibility of a CEU.
Test button , open internet explorer to test the http connection to the CEU
Test button, status not yet tested.
WebService test connection to the CEU.
Test button, status test was not successful.
WebService test connection to the CEU.
Test button, status test was successful.
WebService test connection to the CEU.
Rev. Date:
8.16.2010
Page 9 of 23
The credentials for this setting is a
and the port number defined in the System Configuration for CEU web services in
e with the station name defined in the warehouse in
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.3 Set up the Language
English is the default language inside PP.Mobile2 for the most texts. But during the work it can be that any texts will
come from the system or from CEU. These special texts will not translated from the PP.Mobile2.
To configure and update the default texts
PP.Mobile2.cab is not installing any additional language file. After setup the connection to CEU they can be
downloaded automatically from the CEU (no ActiveSync or Window
Save and reload the selected language file.
Cancel the form.
Download the PP.Mobile2 language files from CEU (for initial and later update possible).
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
English is the default language inside PP.Mobile2 for the most texts. But during the work it can be that any texts will
come from the system or from CEU. These special texts will not translated from the PP.Mobile2.
To configure and update the default texts of PP.Mobile2:
Figure 9: Language configuration
PP.Mobile2.cab is not installing any additional language file. After setup the connection to CEU they can be
downloaded automatically from the CEU (no ActiveSync or Window Mobile Device Center needed).
Save and reload the selected language file.
Cancel the form.
Download the PP.Mobile2 language files from CEU (for initial and later update possible).
Rev. Date:
8.16.2010
Page 10 of 23
English is the default language inside PP.Mobile2 for the most texts. But during the work it can be that any texts will
come from the system or from CEU. These special texts will not translated from the PP.Mobile2.
PP.Mobile2.cab is not installing any additional language file. After setup the connection to CEU they can be
Mobile Device Center needed).
Download the PP.Mobile2 language files from CEU (for initial and later update possible).
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.4 Log in to PowerPick Global
Figure 10: The Log In: verify user,
The user has the possibility to choose a language. If no language is selected in the combo box, PP.Mobile2 check the
default language of the user, if that is also default PP.Mobile2 take the stan
To confirm the input and process the log on.
Cancel the log on, PP.Mobile2 switch then in to “not logged on” status.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Log in to PowerPick Global
: The Log In: verify user, password and optional language
The user has the possibility to choose a language. If no language is selected in the combo box, PP.Mobile2 check the
default language of the user, if that is also default PP.Mobile2 take the standard language of his own settings.
To confirm the input and process the log on.
Cancel the log on, PP.Mobile2 switch then in to “not logged on” status.
Rev. Date:
8.16.2010
Page 11 of 23
and optional language
The user has the possibility to choose a language. If no language is selected in the combo box, PP.Mobile2 check the
dard language of his own settings.
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.5 Main Screen
Figure
Figure 12
Log on.
Page navigation
Back to the preview menu
Exit Application
System Settings
Manual handling
Order handling
Location handling
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Figure 11: The main screen with main menu
12: Example: The main screen with sup menu order
Back to the preview menu
Rev. Date:
8.16.2010
Page 12 of 23
: Example: The main screen with sup menu order
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.6 Manual flow
3.6.1 Put & Pick
Figure
On the first screen can be entered the material that has to handle
created (center). One element of the list shows in the first line the material and in the second line the quantity.
If the text box is not empty, PP.Mobile2 check if the value is a valid material and show the next screen
to create a new manual position.
If the text box is empty and there still positions in the list, PP.Mobile2 starting the confirmation
processing.
If the list is empty, the form will close and PP.Mobile2 jumps back to the
Otherwise it will show the actual option menu.
Option menu item:
Remove all manual X (depending to the mode, put or pick) from the database.
Close manual form and move back to the manual menu. Existing positions remain there.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Figure 13: As example the first manual put screen
(pick has the same flow and style)
be entered the material that has to handle (above). And a list of all manual lines they already
nter). One element of the list shows in the first line the material and in the second line the quantity.
If the text box is not empty, PP.Mobile2 check if the value is a valid material and show the next screen
to create a new manual position.
t box is empty and there still positions in the list, PP.Mobile2 starting the confirmation
If the list is empty, the form will close and PP.Mobile2 jumps back to the manual
Otherwise it will show the actual option menu.
Remove all manual X (depending to the mode, put or pick) from the database.
Close manual form and move back to the manual menu. Existing positions remain there.
Rev. Date:
8.16.2010
Page 13 of 23
. And a list of all manual lines they already
nter). One element of the list shows in the first line the material and in the second line the quantity.
If the text box is not empty, PP.Mobile2 check if the value is a valid material and show the next screen
t box is empty and there still positions in the list, PP.Mobile2 starting the confirmation
manual menu.
Remove all manual X (depending to the mode, put or pick) from the database.
Close manual form and move back to the manual menu. Existing positions remain there.
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
Scenario: Entered into the text box the material name “005”:
Figure 14
To create a manual position any information needed. Especially for put the bin is required. But depending to the
material properties behind the selected m
- Lot
- Serial Number
- Expiry Date
- Production Date
- Release Date
- Qualification
- Quantity
PP.Mobile2 show in the label above the text box which input is request. After entering or choosing PP.Mobile2
checks the value and will show the next request until all required information’s are given to create the manual
position. After a position is created, PP.Mobile2 go back to the first manual screen.
Confirm the actual input request.
Cancel creating a manual position and go
Combo Box:
The user can enter or scan the value inside the text box, or click that button to open a list. Inside the
list the user can choose one element and confirm
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Scenario: Entered into the text box the material name “005”:
14: Creating manual position, check information’s
after show the input screen
To create a manual position any information needed. Especially for put the bin is required. But depending to the
material properties behind the selected material PP.Mobile2 will also ask for:
PP.Mobile2 show in the label above the text box which input is request. After entering or choosing PP.Mobile2
show the next request until all required information’s are given to create the manual
After a position is created, PP.Mobile2 go back to the first manual screen.
Confirm the actual input request.
Cancel creating a manual position and go back to the first manual screen.
The user can enter or scan the value inside the text box, or click that button to open a list. Inside the
list the user can choose one element and confirm the takeover by pressing RETURN.
Rev. Date:
8.16.2010
Page 14 of 23
To create a manual position any information needed. Especially for put the bin is required. But depending to the
PP.Mobile2 show in the label above the text box which input is request. After entering or choosing PP.Mobile2
show the next request until all required information’s are given to create the manual
The user can enter or scan the value inside the text box, or click that button to open a list. Inside the
the takeover by pressing RETURN.
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.6.2 Direct Put
Direct put or direct store means the possibility to place the goods on a location and tell the software where it has to
store. In that case PP.Mobile2 is not sending move commands to machines or give a location proposal.
PP.Mobile2 show in the label above the text box which input is request. After entering or choosing PP.Mobile2
checks the value and will show the next request until all required information’s are given to create the
command. After direct store succeeded PP.Mobile2 clear the screen and waiting for the next direct store input.
To store direct the user has to enter first the “Material” and the “Location Name”. After, depending to the material
property, the following information´s also requested:
- Lot
- Serial Number
- Expiry Date
- Production Date
- Release Date
- Qualification
- Quantity
Confirm the actual input request.
Close the direct store screen and PP.Mobile2 jumps back to the manual menu.
Combo Box:
The user can enter or scan the value inside the text box, or click that button to open a list. Inside the
list the user can choose one element and confirm the takeover by pressing RETURN.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
put or direct store means the possibility to place the goods on a location and tell the software where it has to
store. In that case PP.Mobile2 is not sending move commands to machines or give a location proposal.
Figure 15: First step of direct storing
PP.Mobile2 show in the label above the text box which input is request. After entering or choosing PP.Mobile2
checks the value and will show the next request until all required information’s are given to create the
After direct store succeeded PP.Mobile2 clear the screen and waiting for the next direct store input.
To store direct the user has to enter first the “Material” and the “Location Name”. After, depending to the material
ormation´s also requested:
Confirm the actual input request.
Close the direct store screen and PP.Mobile2 jumps back to the manual menu.
enter or scan the value inside the text box, or click that button to open a list. Inside the
list the user can choose one element and confirm the takeover by pressing RETURN.
Rev. Date:
8.16.2010
Page 15 of 23
put or direct store means the possibility to place the goods on a location and tell the software where it has to
store. In that case PP.Mobile2 is not sending move commands to machines or give a location proposal.
PP.Mobile2 show in the label above the text box which input is request. After entering or choosing PP.Mobile2
checks the value and will show the next request until all required information’s are given to create the direct store
After direct store succeeded PP.Mobile2 clear the screen and waiting for the next direct store input.
To store direct the user has to enter first the “Material” and the “Location Name”. After, depending to the material
Close the direct store screen and PP.Mobile2 jumps back to the manual menu.
enter or scan the value inside the text box, or click that button to open a list. Inside the
list the user can choose one element and confirm the takeover by pressing RETURN.
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.7 Order managed flow
Orders means, on PP.Win or imported from a host system con
station but on the whole PP.Warehouse
3.7.1 Order Select
Order select is the fast way to start a couple of orders. For example a scenario:
The user has fife order request form in front. He scan each
After each scan PP.Mobile2 check, if the order …
- … is known
- … is valid
- … has the same direction as the order before
If it is, PP.Mobile2 note that order into a buffer list and the user scan the next order. After he sca
press “Process” on the screen or “RETURN” on the key board (the input box must be empty). PP.Mobile2 try now
to allocate that buffered orders and start after the confirmation process.
If the text box for the order name is empty and the user press “Process”, PP.Mobile2 check if any order is written in
the list below. If not it will inform the user to enter first any orders. If it is PP.Mobile2 will try to start the
confirmation process for the orders inside the list.
If the text box for the order name is not empty, PP.Mobile2 try to find a order name with that valued name.
Therefore is to known:
- The order direction is chosen by the first scanned order.
Is the list empty, any order directions can chosen. To process a mix of put and pick orders is not possible!
- The order or any of the lines may not
- If it is a pick order, depending to the CEU configuration ask PP.Mobile2 for the Handling Unit.
(Can be turn on or off on PP.Win).
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
Orders means, on PP.Win or imported from a host system contracts they relate not only to
PP.Warehouse.
Order select is the fast way to start a couple of orders. For example a scenario:
The user has fife order request form in front. He scan each order barcode (on each paper is one).
, if the order …
… has the same direction as the order before
If it is, PP.Mobile2 note that order into a buffer list and the user scan the next order. After he sca
press “Process” on the screen or “RETURN” on the key board (the input box must be empty). PP.Mobile2 try now
to allocate that buffered orders and start after the confirmation process.
Figure 16: collect order to be processed
If the text box for the order name is empty and the user press “Process”, PP.Mobile2 check if any order is written in
the list below. If not it will inform the user to enter first any orders. If it is PP.Mobile2 will try to start the
rmation process for the orders inside the list.
If the text box for the order name is not empty, PP.Mobile2 try to find a order name with that valued name.
The order direction is chosen by the first scanned order.
any order directions can chosen. To process a mix of put and pick orders is not possible!
The order or any of the lines may not link to a batch.
If it is a pick order, depending to the CEU configuration ask PP.Mobile2 for the Handling Unit.
or off on PP.Win).
Rev. Date:
8.16.2010
Page 16 of 23
to enter the local area of a
order barcode (on each paper is one).
If it is, PP.Mobile2 note that order into a buffer list and the user scan the next order. After he scanned all orders he
press “Process” on the screen or “RETURN” on the key board (the input box must be empty). PP.Mobile2 try now
If the text box for the order name is empty and the user press “Process”, PP.Mobile2 check if any order is written in
the list below. If not it will inform the user to enter first any orders. If it is PP.Mobile2 will try to start the
If the text box for the order name is not empty, PP.Mobile2 try to find a order name with that valued name.
any order directions can chosen. To process a mix of put and pick orders is not possible!
If it is a pick order, depending to the CEU configuration ask PP.Mobile2 for the Handling Unit.
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
If the text box is not empty, process the order validation.
If the text box is empty, process the confirmation of the buffered orders.
If the order list is empty, close the form and PP.Mobile2 jump back to the order menu.
If the list is not empty, shows the navigation screen.
Option item to reset the buffer list.
Option item to close the form and jump back to order menu.
The buffer order list is not saved!
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
If the text box is not empty, process the order validation.
If the text box is empty, process the confirmation of the buffered orders.
If the order list is empty, close the form and PP.Mobile2 jump back to the order menu.
the list is not empty, shows the navigation screen.
Option item to reset the buffer list.
Option item to close the form and jump back to order menu.
The buffer order list is not saved!
Rev. Date:
8.16.2010
Page 17 of 23
If the order list is empty, close the form and PP.Mobile2 jump back to the order menu.
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.7.2 Order List
Figure 17: First step of order list, choosing direction
and “IN” filter
Figure 17 is shown the filter screen of the list. The user has to select hear the direction type he want to see. Also he
has the possibility to enter first a filter value, that value is used for a “contains text” filtering of the master order
name. The filter value is not a mandatory.
In Figure 18 is shown the list that is shown after a direction is chosen. At the top th
(depends to the filter result, the count of orders) and
[Order Count]). The user can click the order line to check or uncheck the order. If the to check order is a pic
order, the request to enter the handling unit will shown (depending to the CEU configuration).
The lines show the following information’s:
- Order Name
- Handling Rank (automatically calculated of the checked lines)
- Handling Unit Name (depending of the
Start the confirmation process of the checked orders.
Cancel the list screen and PP.Mobile2 jump back to the list filter screen.
Page navigation.
Note: If found PP.Mobile2 the value of the text box as order (
directly the confirmation process for that single order.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
of order list, choosing direction
and “IN” filter Figure 18: Second step of order list, choosing orders
the filter screen of the list. The user has to select hear the direction type he want to see. Also he
has the possibility to enter first a filter value, that value is used for a “contains text” filtering of the master order
The filter value is not a mandatory.
is shown the list that is shown after a direction is chosen. At the top the navigation buttons are shown
(depends to the filter result, the count of orders) and an information label ([Checked Orders] / [Actual Index] /
The user can click the order line to check or uncheck the order. If the to check order is a pic
order, the request to enter the handling unit will shown (depending to the CEU configuration).
The lines show the following information’s:
Handling Rank (automatically calculated of the checked lines)
Handling Unit Name (depending of the CEU setting and the direction type)
Start the confirmation process of the checked orders.
Cancel the list screen and PP.Mobile2 jump back to the list filter screen.
If found PP.Mobile2 the value of the text box as order (Figure 17), PP.Mobile2 is not shown the list it is starting
directly the confirmation process for that single order.
Rev. Date:
8.16.2010
Page 18 of 23
: Second step of order list, choosing orders
the filter screen of the list. The user has to select hear the direction type he want to see. Also he
has the possibility to enter first a filter value, that value is used for a “contains text” filtering of the master order
e navigation buttons are shown
information label ([Checked Orders] / [Actual Index] /
The user can click the order line to check or uncheck the order. If the to check order is a picking
order, the request to enter the handling unit will shown (depending to the CEU configuration).
), PP.Mobile2 is not shown the list it is starting
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.7.3 Batch List
Figure 19: First step of batch list
Figure 20 is shown the filter screen of the list. The user has possibility to enter a filter value, that value is used for a
“contains text” filtering of the batch name. The filter value is
In Figure 20 is shown the list. At the top the navigation buttons are shown (depends to the filter result, the count of
batches) and an information label ([Checked Batches] / [Actual Index] / [Batch Count]). The user can click the batch
line to check or uncheck the batch. Only one line can checked at the same time.
Start the confirmation process of the checked
Cancel the list screen and PP.Mobile2 jump back to the list filter screen.
Page navigation.
Note: If found PP.Mobile2 the value of the text
directly the confirmation process for that single b
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
: First step of batch list Figure 20: Second step of batch list, choosing orders
is shown the filter screen of the list. The user has possibility to enter a filter value, that value is used for a
“contains text” filtering of the batch name. The filter value is not a mandatory.
is shown the list. At the top the navigation buttons are shown (depends to the filter result, the count of
batches) and an information label ([Checked Batches] / [Actual Index] / [Batch Count]). The user can click the batch
tch. Only one line can checked at the same time.
Start the confirmation process of the checked batch.
Cancel the list screen and PP.Mobile2 jump back to the list filter screen.
If found PP.Mobile2 the value of the text box as batch (Figure 20), PP.Mobile2 is not shown the list it is starting
directly the confirmation process for that single batch.
Rev. Date:
8.16.2010
Page 19 of 23
: Second step of batch list, choosing orders
is shown the filter screen of the list. The user has possibility to enter a filter value, that value is used for a
is shown the list. At the top the navigation buttons are shown (depends to the filter result, the count of
batches) and an information label ([Checked Batches] / [Actual Index] / [Batch Count]). The user can click the batch
), PP.Mobile2 is not shown the list it is starting
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.7.4 View Location / Quantity change
Figure 22: Second step choose break down
In Figure 21 the user has to enter / scan the location name
the location it will show Figure 22. There PP.Mobile2 will show the location
location index and found breakdown count
To change now the quantity of a break down, the user has to enter the location name (
break down in foreground (Figure 22
again the screen to Figure 23. In Figure
down.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
View Location / Quantity change
Figure 21: First step enter location name
: Second step choose break down Figure 23: Second step change quantity
the user has to enter / scan the location name and press enter on the keyboard
. There PP.Mobile2 will show the location information (bottom) and the actual
location index and found breakdown count (top).
To change now the quantity of a break down, the user has to enter the location name (Figure
22) and click “Change Quantity” (bottom right of Figure
Figure 23 PP.Mobile2 request from the user the new actual
Rev. Date:
8.16.2010
Page 20 of 23
: Second step change quantity
and press enter on the keyboard. If PP.Mobile2 can find
information (bottom) and the actual
Figure 21), brings the desired
Figure 22). PP.Mobile2 switch
PP.Mobile2 request from the user the new actual quantity for that break
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
Figure 22: PP.Mobile2 open screen
Figure 23: Confirm the entered new location quantity.
Figure 21: PP.Mobile2 close the form and jump back to the location menu
Figure 22: PP.Mobile2 jump back to
Figure 23: PP.Mobile2 jump back to
Location breakdown navigation.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
: PP.Mobile2 open screen Figure 23 for the actual shown brea
: Confirm the entered new location quantity.
: PP.Mobile2 close the form and jump back to the location menu
: PP.Mobile2 jump back to Figure 21
: PP.Mobile2 jump back to Figure 22
Location breakdown navigation.
Rev. Date:
8.16.2010
Page 21 of 23
for the actual shown break down
: PP.Mobile2 close the form and jump back to the location menu
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
3.7.5 Confirmation process
The confirmation process can be start from
- Manual put / pick
- Order Select
- Order List
- Batch List
Figure 24: Starting confirmation process
Figure 26: Process status information
(no process change possible)
In Figure 24 PP.Mobile2 starting up the confirmation processor. It checks if the WorkFlow
transmit the orders / batch to the WorkFlow
After Figure 24 PP.Mobile2 is controlled by the WorkFlow
Figure 25 request from the user to select the area where he want to work next. After,
the related storage units until the first arrives
the shown task for confirmation.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
The confirmation process can be start from
: Starting confirmation process Figure 25: Area selection
: Process status information
(no process change possible)
Figure 27: Task confirmation
PP.Mobile2 starting up the confirmation processor. It checks if the WorkFlow
transmit the orders / batch to the WorkFlow – Engine and any more.
PP.Mobile2 is controlled by the WorkFlow – Engine of Power Pick Global
request from the user to select the area where he want to work next. After, Figure
the related storage units until the first arrives. And in Figure 27 the user has to enter the requested inputs (bottom) of
Rev. Date:
8.16.2010
Page 22 of 23
: Area selection
: Task confirmation
PP.Mobile2 starting up the confirmation processor. It checks if the WorkFlow– Engine is running,
Engine of Power Pick Global (same as PP.Windows).
Figure 26 shows the status of
the user has to enter the requested inputs (bottom) of
Title:
Power Pick Global - Mobile Devices
KARDEX Software GmbH., 2012
Figure 28: Cancel menu of
To confirm the actual requested
Depends on the step opens a cancel menu (
processor.
Open the process selection screen.
Restart actual task and redrive therefore the actual process.
Moves the actual task to the end of the confirmation buffer.
Remove the actual task from the confirmation buffer.
Hide the close menu and shows again the screen where called from of the
Close the confirmation processor.
Mobile Devices
Rev:
28
Rev.
8.16.2010
2012
: Cancel menu of Figure 26 Figure 29: Cancel menu of
To confirm the actual requested input.
Depends on the step opens a cancel menu (Figure 28 or Figure 29) or close the confirmation
Open the process selection screen.
actual task and redrive therefore the actual process.
Moves the actual task to the end of the confirmation buffer.
Remove the actual task from the confirmation buffer.
Hide the close menu and shows again the screen where called from of the confirmation processor.
Close the confirmation processor.
Rev. Date:
8.16.2010
Page 23 of 23
: Cancel menu of Figure 27
) or close the confirmation
confirmation processor.