Power International - Brochure
-
Upload
saurabhrishu -
Category
Documents
-
view
221 -
download
0
Transcript of Power International - Brochure
-
7/30/2019 Power International - Brochure
1/19
17/B-2,SHIV SHAKTI
INDUSTRIAL ESTATE, L.B.S.
ROAD, OPP. DAMODAR
PARK, GHATKOPAR (W) ,
MUMBAI-400086.
-
7/30/2019 Power International - Brochure
2/19
Key Features:
1. Double Capstan Cable Pulling Machine.2. Display of real time cable pulling tension.
3. Display of total length pul led.
4. Display of speed of cable pulling.
5. Pre Set option for Total Length & Max. Tension for the cable pulling .
6. Printing protocol.
7. Deadman's lock.
8. Emergency Stop Button
THAL ER Cable Capstan Winch 10 T
-
7/30/2019 Power International - Brochure
3/19
STRAIGHT ROLLER
All powder coated, heavy duty assembly suitable for cables upto 140mm dia. Steel frame fitted large waisted solid aluminiumroller running on sealed bearings & galvanized shaft.
SMAL L STRAIGHT ROLLER
STRAIGHT ROLLER SMALL STRAIGHT ROLLER
Width 215 mm 220mm
Height 300 mm 230mm
Length 360 mm 300 mm
Roller Length 195 mm
(Tolerance: +/-10mm)
-
7/30/2019 Power International - Brochure
4/19
HEAVY DUTY STRAIGHT ROLLER
All powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted large waited solid aluminumroller running on sealed bearings & galvanized shaft.
Width: 265mmHeight: 180mmLength: 540mmRoller Length: 190mm(Tolerance: +/-10mm)
-
7/30/2019 Power International - Brochure
5/19
STRAIGHT ROLLER WITH V-ASSEMBLY
All powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted with large waited solid steelrollers running on sealed bearings & galvanized shaft in V assembly.
Width: 460mmHeight: 275mmLength: 460mmRoller Length: 135mm
(Tolerance: +/-10mm)
-
7/30/2019 Power International - Brochure
6/19
All powder coated finish & using two vertical & one horizontal Aluminum rollers for taking heaviest cables rounddifficult corners. The assembly is of a robust construction for use in the most arduous conditions and can be linkedtogether with stake pins provided to form a continuous corner roller system.
Height: 320mmWidth: 335mmLength: 525mm(Tolerance: +/- 10mm)
TRIANGULAR / TRIPLE CORNER ROLLER
-
7/30/2019 Power International - Brochure
7/19
All powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted on all four sideswith large waited solid steel rollers running on sealed bearings & galvanized shaft.
Height: 500mmWidth: 345mmLength: 380mmRoller Length: 195mm(Tolerance: +/-10mm
BEND GUIDE ROLLER
-
7/30/2019 Power International - Brochure
8/19
HEAVY DUTY V ROL LER ASSEMBLY V ROL LER ASSEMBLY
A guide roller in front of the drum which centralizes the cable from the drum into the trench. Sealed roller bearingsfitted in steel roller. Mounted in heavy duty steel frame.All powder coating as well as Zinc Plating Finish.
HEAVY DUTY V ROLLER
ASSEMBLY
V ROLLER ASSEMBLY
Width 500 mm 300mm
Height 480mm 270mm
Length 1000mm 750mm
(Tolerance: +/- 10mm)
-
7/30/2019 Power International - Brochure
9/19
PRESSURE CUM - BEND ROLLER
Combination of two vertical rollers & onehorizontal roller asa basefor cables movingtowards thebends. Theoutervertical roller help protectthecable jumpingoutside& thusensuring prevention ofanysort of cabledamage.Aboveroller comesalongwith ahorizontal rodadjusted on thetop & thebottomwith adjustablelength thatgetsfitted& tightened upattheextremeendsof thetrenches.
PressureCumBend roller is used wherethere is nobaseof ground to thecable& also when there areutilities belowthecablebeinglaid.
Height: 440 mmWidth: 330 mmLength: 390 mm(Tolerence: +/- 10mm)
-
7/30/2019 Power International - Brochure
10/19
KANYA ROLLER
All powder coated, heavy duty steel assembly suitable for laying cables as per the required site
condition. Steel rollers running on bearings & galvanized shaft.
-
7/30/2019 Power International - Brochure
11/19
Designed to place at the end of the manhole or pit entrance to ease the cable in. Triple Aluminium roller on tubular steelframe
Height: 365 mmWidth: 210mmLength: 490 mm(Tolerance: +/- 10mm)
MANHOLE ROLLERS
-
7/30/2019 Power International - Brochure
12/19
BASE ROLLER
Base roller is suitable for section between the cable drum and the start of thetrench as per the site requirement.Base rollers are made of steel rollers fitted in sealed bearing running on galvanized shaft &rubber bushing for smooth rotations.
-
7/30/2019 Power International - Brochure
13/19
HORIZONTAL & VERTICAL ROLL ER
Six vertical steel rollers each running on roller bearings and mounted in heavy duty steel frame.Power coated finish
Height: 310mmWidth: 90mmLength: 830mm
Note:These rollers are used in conjunction with horizontal rollers as per the photograph and where large diameter cableshave a limited bend radius.Vertical roller comprise of one frame with several verticals rollers attached in it.Horizontal roller comprise of one frame with two horizontal rollers attached in it.
-
7/30/2019 Power International - Brochure
14/19
NYLON CABLE CLEATHDPE CABLE CLEAT
FEATURES :-
Manufactured in high strength HDPE & glass fiber material.High impact resistance.Unaffected by corrosive environments.Higher mechanical strength than polythene.High level of resistance to UV lights.Available from 50 to 110 mm Diameter.
-
7/30/2019 Power International - Brochure
15/19
ALUMINUM TREFOIL CLEAT ALUMINIUM CLEAT
-
7/30/2019 Power International - Brochure
16/19
POWER ROLLER
Overall Dimensions
Length 600 mm
Width 550 mm
Height 485 mm
-
7/30/2019 Power International - Brochure
17/19
HYDRAULIC CABLE J ACK MECHANICAL CABLE J ACK
Features* Lifting Capacities : 3.0 Ton* Improved Screw Design* Extra Strong Base Plate* Robust and Easy to Use* L ifting Height 310mm* Design for Heavy Duty Use
* Easy to Handle and Simple Operation
-
7/30/2019 Power International - Brochure
18/19
20T Thaler make Hydraulic Jack
-
7/30/2019 Power International - Brochure
19/19
Cable Drum Trailer