POTENZA ST Remote Control How to program to control … go of the button when your device turns OFF....
2
Brand Code Method 1. Manually turn ON the TV that you want to program to the remote. 2. Press and release the TV button. 3. Press and hold Setup button until the TV button blinks twice. 4. Press and release the TV button. The TV button will stay lit. 5. Find your TV and brand from the chart below and note the digit key assigned to your brand. Press and hold down the “Digit” button for your device/brand while pointing the remote at the TV. 6. Let go of the button when your device turns OFF. 7. Press the Power button to turn your TV ON. Press the STB button. You are now ready to watch your favorite show! If you do not see your TV code on the list, follow these instructions: Basically, this means that you can transfer the information from the FACTORY ISSUED remote to the ADB remote (power, volume, etc.) It bypasses having to do the code search method. 1. Manually turn ON the TV that you want to program to the remote. 2. Press and release the TV button. 3. Press and hold Setup button until the TV button blinks twice. 4. Press 9-9-1. 5. Then press Channel Up button slowly and repeatedly until your TV turns off. 6. Press Setup button. 7. Press the Power button to turn your TV ON. Press the STB button. You are now ready to watch your favorite show! LYNXX Corporate Office Camp Douglas, WI 127 State Hwy 12 & 16 Phone: (608) 427-6515 Internet | Phone | TV POTENZA ST Remote Control How to program to control your TV DIGIT BRAND OF TV 1 Insignia 2 LG 3 Panasonic 4 Philips/Magnavox 5 Samsung 6 Sanyo 7 Sharp 8 Sony 9 Vizio 0 Westinghouse If you need additional assistance, please view our video tutorials on Channel 1 or visit our website, www.getlynxx.com/support *If you do not see the Guide once your remote is programmed, you may need an HDMI connection between your set top box and TV.
Transcript of POTENZA ST Remote Control How to program to control … go of the button when your device turns OFF....
Brand Code Method1. Manually turn ON the TV that you want to program to the remote.2. Press and release the TV button.3. Press and hold Setup button until the TV button blinks twice.4. Press and release the TV button. The TV button will stay lit.5. Find your TV and brand from the chart below and note the digit key assigned to your
brand. Press and hold down the “Digit” button for your device/brand while pointing the remote at the TV.
6. Let go of the button when your device turns OFF.7. Press the Power button to turn your TV ON. Press the STB button. You are now ready
to watch your favorite show!
If you do not see your TV code on the list, follow these instructions:
Basically, this means that you can transfer the information from the FACTORY ISSUED remote to the ADB remote (power, volume, etc.) It bypasses having to do the code search method.
1. Manually turn ON the TV that you want to program to the remote.2. Press and release the TV button.3. Press and hold Setup button until the TV button blinks twice.4. Press 9-9-1.5. Then press Channel Up button slowly and repeatedly until your TV turns o�.6. Press Setup button.7. Press the Power button to turn your TV ON. Press the STB button. You are now ready to watch your
favorite show!
LYNXX Corporate O�ceCamp Douglas, WI
127 State Hwy 12 & 16 Phone: (608) 427-6515
Internet | Phone | TVPOTENZA ST Remote Control How to program to control your TV
DIGIT BRAND OF TV
1 Insignia 2 LG 3 Panasonic 4 Philips/Magnavox 5 Samsung 6 Sanyo 7 Sharp 8 Sony 9 Vizio 0 Westinghouse
If you need additional assistance, please view our video tutorials on Channel 1 or visit our website, www.getlynxx.com/support
*If you do not see the Guide once your remote is programmed, you may need an HDMI connection between your set top box and TV.
LYNXX Corporate O�ceCamp Douglas, WI
127 State Hwy 12 & 16 Phone: (608) 427-6515
Internet | Phone | TVPOTENZA ST Remote Control Remote Buttons & Descriptions
TV, AUD, DVD, VCR, STB Use one remote to control multiple devices.
SetupUse for programming sequences of devices controlled by the remote.
Skip Forward, Skip Back, Rewind, Play, Forward, Stop, Pause, RecordIn STB mode, these control the DVR functions. In other modes, these can control a VCR, DVD Player or PVR.
MenuDisplays the menu.
GuideOpens the Interactive Program Guide.
Day +/-Jump ahead or back one day in the Interactive Program Guide.
Red, Green, Yellow, Blue Access additional features on your set-top box. Red=Weather, Green=Recent CallsYellow=Apps
Vol +/- Raise or lower the volume.
MuteTurn the sound o� or on.
Aspect Ratio*Temporarily change the conversion mode from Original Size or Fit to Screen.
InputIn TV control mode, will change the input of the device you are controlling.
PowerTurn on/o� a selected device.
LiveReturn to watching live TV.
ListDisplay a list of recorded, future and series rules on your DVR.
InfoDisplay the current channel and program information. Press again for more detail.
Browse, Search, Arrow, OKNavigate and select onscreen choices.
(Browse) Right Arrow Browse current station.
(Search) Left Arrow Search for a full title or word within a title of a program.
ExitExit the current screen.
Page +/-Page up or down in lists and Interactive Program Guide.
Channel +/-Changes to the next higher or lower channel.
On Demand (VOD)Access video on demand services.
LastRecall the last channel you were watching.
FAV (Formerly Network)View your favorite channels.
Number Keys (0-9) Directly select a channel or enter options.
Closed Captioning Turn on and o�
