NIGHT VIEW

WYNDHAM CITY GATEWAY PROPOSAL

SITE PLAN

PANEL 28

PANEL 53

PANEL 131

ROOF

WING

TWIST

PANEL 197

PANEL 231

Panels of different numbers shows the changing shapes of the form as one progress-es along the gateway. The position and affect of lights depends on the form of the panel.

The progression of the form follows the concept

of open-close-open. Direct light facing the driver

metal panel reduces glare

To Melbourne & Wyndham

Light receds as driver exits the gateway, signifying the end of the hateway experience

+-

ONGALVANIZED STEEL ANGLE WITH THREADED BOLT

panel-to-panel joinery detail

METAL PANEL

METAL PANEL

LED LIGHT

NOTE: 100 mm steel bar will run through along each longitudinal panel, welded to a steel plate in the foundation, embedded in a strip concrete footing.

(for the 1:50 model, LED lights are used. for 1.1 construction,type of light to be advised)

CUSTOM METAL PANEL

ASSEMBLY TECTONICS

LIGHT STUDY

The middle section is then further manipulated to form a section roof over the highway

The third section are lifted vertically to form the starter wings greeting drivers into the municipality

The single element is then split into two, further twisting and manipulating to get the ideal shape. The southern wing are reduced in length to minimize intrusion to the middle section.

The third section opens up the driver as he approaches Wyndham/Melbourne

WINGS

An overhead roof in the middle section to intensify the experience of the gateway through encapsulation

ROOF

west side, giving the driver a glimpse of Wydham before entering the gateway

WALL

form. Moving the slider changes the number of rectangles per panel and the number of panels per ground area.