Portland College Aviation Maintenance Tools

8/6/2019 Portland College Aviation Maintenance Tools

1/4

5/26/05 Page 2

PORTLAND COMMUNITY COLLEGE

AVIATION MAINTENANCE TECHNOLOGY

TOOL AND SUPPLIES LIST

This list is for a minimum A&P Tool Set

Keep a copy of this list as an inventory check list for insurance purposes.Keep it separate from your tool box. Enter the quantity and cost.

SOCKET WRENCH SET, 1/4" DRIVE - (12 Point)

Must contain at least the following items:

RATCHET HANDLE, 1/4" Drive (fine tooth preferred)

EXTENSION, 1/4" Drive, 3" Long


SOCKET, 1/4" Drive, Shallow 3/16"









SOCKET WRENCH SET, 3/8" DRIVE - (12 Point)Must contain at least the following items:

RATCHET HANDLE, 3/8" Drive (fine tooth preferred)



UNIVERSAL JOINT, 3/8" Drive

ADAPTER, 3/8" To 1/2" Drive

ADAPTER, 1/4" To 3/8" Drive



SOCKET, 3/8" Drive, Shallow 1/2"SOCKET, 3/8" Drive, Shallow 9/16"




SPEEDER WRENCH, 3/8" Drive with screwdriver bit socket 1/4" hex

(also called a speeder, or speed handle.)


2/4

5/26/05 Page 3

SPARK PLUG SOCKET, 3/8" DRIVE - (6 Point)

AIRCRAFT 6 POINT SPARK PLUG SOCKET, 3/8 Drive

ORSOCKET, 1/2" Drive, (12 Point) Deep 7/8" (must be deep broached to

accept maximum diameter to full depth.)

PLIERS

CHANNEL LOCK - 10"

DUCK BILL - 8"

NEEDLE NOSE - 6"

DIAGONAL CUTTER - 6"

COMMON SLIP JOINT - 8"

VICE GRIP - 6"

COMBINATION WRENCH SET

Must Contain at Least the Following Sizes:

WRENCH, Combination, 5/16"











MEASURING TOOLS

OUTSIDE MICROMETER, 0-1" range, (not digital) graduated to .0001"

DIAL CALIPER, (not digital or plastic) graduated to .001"

COMBINATION SET (includes 12" machinist's square,

protractor head, and centering head)

SCALE, 6" Long (1/10", 1/100", 1/32", and 1/64" graduations)

STEEL TAPE RULE, 24 ft. minimum

MULTIMETER, (digital, diode check, 10 amp circuit preferred)

INSPECTION TOOLS

INSPECTION MIRROR (approx. 2" size; round or rectangular)

FLASH LIGHT - 2 D cell, with plastic case

10 POWER MAGNIFYING GLASS (Rock Creek Book Store)


3/4

5/26/05 Page 4

SCREWDRIVERS

MAGNA TIP or equivalent - approx. 8" long with four replaceable 1/4" #1

hex Apex style tips. Ratcheting recommended. Tips should be one each

of the following: #1 Phillips, #2 Phillips, small straight slot, medium

straight slot.

SCREWDRIVER SET - 9 Piece minimum (must include straight slot and

Phillips. Blade sizes should range from 3" to 12")STRAIGHT SLOT STUBBY - approx. 1" long blade with 1/4"

blade width.

PHILLIPS STUBBY - approx. 1" blade length with #2 tip.

METAL WORKING TOOLS

CENTER PUNCH (automatic preferred)

SCRIBE (with one 90 degree end & one straight end)

HACK SAW FRAME, 12" (with blades, 28 to 32 teeth per inch)

FILE, Flat, smooth, single cut, 8"

FILE, Flat, medium, double cut, 8"

FILE, Round, smooth, 8"

FILE, Vixen (Nicholson Super Shear or equivalent, 8")

(available at: Hall Tool, General Tool, Sam Mesher Tool)

FILE HANDLES, Wood or plastic (One for each file)

FILE CARD

COLD CHISEL; approx. 4" long & 7/16" wide

PIN PUNCH, 3/32"

PIN PUNCH, 1/8"

PIN PUNCH, 5/32"

PIN PUNCH, 3/16"

PIN PUNCH, 1/4"

PIN PUNCH, 5/16"

SAFETY EQUIPMENT

LEATHER GLOVES, good quality

WELDING GLOVES, all leather, gauntlet-type (Rock Creek Bookstore)

RESPIRATOR, activated charcoal type

HEARING PROTECTION, ear-muff style is recommended, but ear plugs

are acceptable. (Rock Creek Bookstore)

EYE PROTECTION, must meet ANSI Z87.Lab Safety Supply, Inc. part # 24741B suggested; these fit over standard

eyeglasses, and are available in Rock Creek Bookstore. (Standard

corrective lenses must have ANSI Z87 eye protection worn over them.)


4/4

5/26/05 Page 5

OTHER TOOLS

BALL PEEN HAMMER - 12 oz.

DEAD BLOW HAMMER - 10 to 16 oz., soft faced, (no exposed metal)

PUTTY KNIFE, Small, 1-1/4" to 1-1/2" wide blade

POCKET KNIFETELESCOPING MAGNETIC PICK UP TOOL

MECHANICAL FINGERS (flexible pick-up tool with spring jaws)

HEX KEY WRENCH SET (Allen wrench) fractional, .050" to 3/16" range

WIRE STRIPPERS, (heavy duty, automatic preferred)

SOLDERING IRON, (25 watt)

TERMINAL CRIMPING TOOL, (ratcheting style preferred)

TIRE VALVE CORE TOOL

DIVIDERS (6 inch)

PENCIL COMPASS

PLASTIC PROTRACTOR

CALCULATOR (scientific, with inverting capability)

TOOL BOX

TOOL BOX, The tool box should be sturdy enough to be transported

between shops and home if needed. Put your name on your box. A box

with drawers is suggested. Boxes should not be so large that they take up

valuable shop floor space. Roller boxes have a separate designated storage

area that is limited and is based on space available. Roller cabinets must

be less than 30 inches in width. You will only be permitted to have one

tool box. Upper cabinet boxes must be stored on the tool box racks.

Roller cabinets cannot also have an upper cabinet.

LOCK & CHAIN, Tool boxes must be kept locked and chained to

designated racks when not in use. Tool boxes may be left overnight in

designated racks, however, security cannot be assured. Tool boxes found

chained to anything other than designated racks will be subject to having

the chain cut and tool box removed.

SUPPLIES

1/4" GRAPH PAPER

COLORED HIGHLIGHTING MARKERS

#2 PENCILS

3 RING BINDER ( 2-3")

3 x 5 CARDS (lined)

"ULTRA FINE POINT" PERMANENT MARKER, for marking sheet

metal (Rock Creek Bookstore)

Portland College Aviation Maintenance Tools

Documents

Transcript of Portland College Aviation Maintenance Tools