Porsche 928 Intake, Cam Cover, and Water Bridge Powder ... · Porsche 928 powder coating...
12
1 Rev. 2.0 Contact Information name: e-mail: address: phone: Project Powder coat Porsche 928 Parts: intake (with separate left and right end plates), two cam covers, water bridge, and thermostat elbow. Powder Selection base coat: top coat: Additional Items Supplied date:
Transcript of Porsche 928 Intake, Cam Cover, and Water Bridge Powder ... · Porsche 928 powder coating...
1
Rev. 2.0
Contact Information
name: e-mail:
address:
phone:
Project
Powder coat Porsche 928 Parts: intake (with separate left and right end plates), two cam covers, water
bridge, and thermostat elbow.
Powder Selection
base coat: top coat:
Additional Items Supplied
date:
2
Rev. 2.0
Part: Intake
General Information:
Material: aluminum/magnesium alloy
Coat this part promptly after baking; it oxidizes quickly!
Cleaning
Strip all interior and exterior surfaces using chemical strippers
and media blasting.
Bake until you are sure all oils and contaminants have been outgassed.
Masking
Mask, plug, and cap using the following annotated photos as a guide.
3
Rev. 2.0
Top:
4
Rev. 2.0
Bottom:
5
Rev. 2.0
Right side (left side is just mirror image of right side):
6
Rev. 2.0
Part: Intake End Plates
General Information:
Material: aluminum/magnesium alloy
Coat this part promptly after baking; it oxidizes quickly!
Cleaning
Strip all interior and exterior surfaces using chemical strippers
and media blasting.
Bake until you are sure all oils and contaminants have been outgassed.
Masking
Mask and plug using the following annotated photos as a guide.
7
Rev. 2.0
Front:
Back:
8
Rev. 2.0
Part: Cam Covers (Two Identical Units)
General Information:
Material: aluminum/magnesium alloy
Coat this part promptly after baking; it oxidizes
quickly!
Cleaning
Strip all interior and exterior surfaces using chemical strippers and media blasting.
Bake until you are sure all oils and contaminants have been outgassed.
Masking
Mask and plug using the following annotated photos as a guide.
9
Rev. 2.0
Front:
Back:
10
Rev. 2.0
Part: Water Bridge
General Information:
Material: aluminum
Cleaning
Strip all interior (as much as possible) and exterior surfaces
using chemical strippers and media blasting.
Bake until you are sure all oils and contaminants have been
outgassed.
Masking
Mask and plug using the following annotated photos as a guide.
Top:
11
Rev. 2.0
Bottom:
Front:
12
Rev. 2.0
Part: Thermostat Elbow
General Information:
Material: aluminum
Cleaning
Strip all interior (as much as possible) and exterior surfaces using chemical strippers and media
blasting.
Bake until you are sure all oils and contaminants have been outgassed.
Masking
Mask and plug using the following annotated photo as a guide.
