POOL HEATING - atecpool.international€¦ · Atecpool Supreme ATEC SPH Series only for heating...

POOL HEATING

Making Heat something Cool

Atecpool Reversible Cycle Heat Pump

ATECPOOL INTERNACIONAL ESPAÑA RCHP

(Reversible Cycle Heat Pump) offers optimum

return on your money and extend the swimming

pool season more than any other heat pump with

best COP. ATECPOOL Heat Pumps are fully tested

and certified and listed as ECO friendly.

ATECPOOL Heat Pumps are manufactured to offer

the highest international quality with an advanced

design resulting in lower sound and vibration levels

and invulnerable to extreme outdoor conditions.

ATECPOOL Top Selling heat cool pumps are

equipped with pure Titanium heat exchanger at its

core, fully resistant to any corrosion attacks. Uses

only refrigerants with low ecological impact like

R 407 C, R 134 A or R 410 A.

171atecpool.com

Reversible Cycle Heat PumpOutdoor Installation

Let’s start swimming all year round!

• ATECPOOL Reversible cycle heat pump can be used for heating and cooling swimming pool, spa or other water bodies.

• RCHP technology is based on the same principle employed in air conditioners and refrigerators, delivering up to five times more energy in heat than it consumes electricity. Heat pumps are designed to heat your pool by extracting ambient heat from the atmosphere. This heat is then transferred into a refrigerant gas which is compressed and heated further. The heat is then transferred into the pool water, and heats your pool.

• With a Coefficient of Performance (COP) of greater than 5.8 at an air temperature of 26°C and over 4.5 at just 15°C, ATECPOOL heat pumps are 15-30% more efficient than competitive units. This remarkable efficiency can save up to 80% on running costs compared to alternative gas or electric pool heating. 16 programs with synchronization capability, 2 Years manufacturer warranty.

• Whisper-quiet Operation

• Quality, Reliability and Durability

• Our Heat Pumps are manufactured using only top-quality components. The Titanium heat exchanger is not only extremely efficient, it will never rust or corrode. Our heat pumps also feature more accurate and durable commercial grade digital controllers with best user friendly features, specific water flow switches and high capacity compressor capacitors.

M SE T AUX

Data adjustmentand feature setbuttons

Parametersettings

LCDDisplay

Coolingmode

Automaticcycle mode

Heatingmode

Power

Auxiliaryheating key

Mode

172 atecpool.com


Atecpool Heat Cool Pump

ATECPOOL Heat Pump Benefits

• Uses freely available air energy = 4-5 times more effective than conventional electrical heaters.

• For every kW of power consumed, you get at least 4-5kW of free power

• Inexpensive to run

• Incredibly efficient Japanese inverter technology

• Quietest operation

• Top quality, maximum durability Titanium heat exchanger

• Installation is quick and easy

External Heat Exchanger (Evaporator coils)

• The tubes are made of copper and the fins in aluminium.

• The extra-large evaporator coils are designed to collect more heat from the outside air to ensure performance in even the most adverse conditions.

• Large axial fans, with precision engineered blades are used to draw maximum ambient air and pass it on to the evaporator coils.

Refrigerant

• We use the environmentally approved refrigerant R407-C, R410-A, R134-A depending on the client requirement.

• For maximum efficiency you can combine your reversible cycle heat pump and solar pool heating in one system to capitalise on the suns free energy. All components of ATECPOOL heat cool pumps are of the highest international quality.

Water Heat Exchanger

• This is made of double spiralled Titanium tubes encased in PVC or S.S. for additional protection against corrosive pool water.

• The double spiraling of the heat exchanger increases the surface area that comes in contact with the pool water, and also drastically reduces scaling.

173atecpool.com

Reversible Cycle Heat PumpOutdoor InstallationSpecification Model / Code

03310020H 03300030 03300040 03300050 03300060 03310070

Heating capacity Kw 8.8 13 17 21 25 35

BTU /hr 30000 44000 58000 72000 86000 120000

Heating Power Input Kw 1,9 2,65 3,7 4,6 5 7,5

Cooling Capacity Kw 5,8 8,8 12 14,5 17,4 25

BTU /hr 19720 30000 41000 49500 59500 86000

Cooling Power Input Kw 2,1 2,85 3,9 5,2 5,8 8,4

Running current A 8.6 / 9.6 13.6 / 14.3 18.0 / 19.1 7.1 / 7.35 8.91 / 10.33 14.5 / 13.2

COP 5.1 5.1 5.0 5.0 5.1 5.0

Power Supply V / PH / HZ 230 / 1 / 50 230 / 1 / 50 230 / 1 / 50 380 / 3 / 50 380 / 3 / 50 380 / 3 / 50

Compressor Quantity 1 1 1 1 1 2

Compressor Rotory Rotory Scroll Scroll Scroll Scroll

Fan Quantity 1 1 1 1 1 2

Fan Input Power W 150 200 200 200 200 200 x2

Fan Rotate Speed rpm 850 830 830 830 830 830

Fan Airflow cfm 3330 6960 6960 6960 6960 13920

Fan direction Horizontal Vertical Vertical Vertical Vertical Vertical

Noise dB (A) 50 51 51 51 54 59

Water connection mm 50 50 50 50 50 50

Water Flow volume m3/h 3 6 7.5 8 9 10

Water pressure drop (max) kPa 8 8 10 12 12 15

Unit net dimensions (L/W/H) mm 1010*420*650 660*660*860 660*660*860 660*660*860 660*660*860 1448*725*976

Unit net weight Kg 77 86 100 125 150 200

Specification Model / Code

03300080 03300090 03310110 03310120 03310140 03310160

Heating capacity Kw 45 55 90 105 160 210

BTU /hr 150000 187000 306000 357000 550000 714000

Heating Power Input Kw 9,5 11 17,5 22,5 34,2 46,3

Cooling Capacity Kw 34 42 70 88 120 150

BTU /hr 116000 143000 238000 300000 410000 510000

Cooling Power Input Kw 9 10,3 17,8 24,7 41,6 56,2

Running current A 16.4 / 15.7 19.2 / 18.0 31.2 / 31.7 40.1 / 44.0 61.0 / 74.2 81.8 / 99.1

COP 4,9 4,9 4,7 4,5 4,7 4,5

Power Supply V / PH / HZ 380 / 3 / 50 380 / 3 / 50 380 / 3 / 50 380 / 3 / 50 380 / 3 / 50 380 / 3 / 50

Compressor Quantity 2 2 3 4 4 4

Compressor Scroll Scroll Scroll Scroll Scroll Scroll

Fan Quantity 2 2 3 3 3 4

Fan Input Power W 200 X 2 200 X 2 200 X 3 200 X 3 550 X 3 550 X 4

Fan Rotate Speed rpm 830 830 830 830 870 870

Fan Airflow cfm 13920 13920 19500 19500 22500 30000

Fan direction Vertical Vertical Vertical Vertical Vertical Vertical

Noise dB (A) 61 61 62 62 65 65

Water connection mm 63 63 63 110 110 110

Water Flow volume m3/h 14 18 30 32 40 60

Water pressure drop (max) kPa 15 15 16 16 24 24

Unit net dimensions (L/W/H) mm 1450*730*1250 1450*730*1280 2150*760*1310 2170*1065*1930 2170*1065*2100 2850*1108*2220

Unit net weight Kg 250 265 370 695 950 1350

Data sheet is based on capacities:Cooling: Ambient air temperature: 42º / 36º C - Water temperature: 33º C // Heating: Ambient air temperature: 23º / 18º C - Water temperature: 26º C

174 atecpool.com


Atecpool Heat Cool Pump

// 03300090:03300080:

03300060

Heating capacity 25 kW

Cooling capacity 17.4 kW

// 03300090:03300080:

03310080


Cooling capacity 34 kW

// 03300090:03300080:

03300090



// 03300090:03300080:

03310110



175atecpool.com

Supreme Water to Water Heat PumpFuture solution heat pumps

Indoor Installation

ATECPOOL Supreme W2W Heat Pumps offer high efficiencies, advanced features, extremely quiet operation and application flexibility and the best suited for indoor installation with compact design with very little floor space . Plant rooms located within the buildings with many piping around is always a challenge but not for our compact W2W model. Super quiet units with anti-vibration techniques would support the usability of the adjacent rooms.

Smart Energy

Clean Energy is our mission and ATECPOOL Supreme W2W uses the energy contained in renewable resources: air, water and ground, with zero CO2 emissions and no fossil fuel use. The energy source from water / air is clean and unlimited, making the heat pump a precious renewable source, data based on RES European directive (Renewable Energy Source). We use only Eco-friendly refrigerant R410A for compressors.

High Efficiency

W2W heat pumps typically deliver 4 to 6 Watts of every watt of energy consumed to run the compressor and load line pumps. In other words, for each Watt of energy used, to provide 4 to 6 Watts of energy to heat the water body. The use of a high efficiency water-to-water heat pump combined with source line various application possibilities is an unbeatable combination. Energy cost reduction upto 50% is the highlight of ATECPOOL Supreme model in comparison with traditional systems.

Clean Air

With reduced 60% CO2 emissions, ATECPOOL W2W heat pump provides sustainable and green solutions in heating, cooling and hot water production. While taking 75% of the energy directly from the environment either from Air / Water, and 25% of it from the power grid, Supreme heat pumps consumption ensures a 60% reduction of CO2 emissions, subsequently adding to environmentally friendly.

Avant-Garde Technology

Advanced Technology supports water-to-water heat pump to be applied in a boiler / cooling tower setting, in a geothermal closed or open loop application, or in a hybrid application. Best utilization of resources at high efficiency is the key for W2W heat pumps. Technology supports to accommodate service access to the controls, and other major components to contribute to greater serviceability and maintainability of the unit.

Easy to Invest

Energy Class of building/towers is major concern in real estate valuation these days. A W2W heat pumps with great energy saving would be the right choice to increase your energy rating. Using ATECPOOL W2W in new buildings or in refurbishments is a simple and effective way to combine the energy class of the building with an higher quality of comfort, improving the present and future value of the property.

176 atecpool.com

Atecpool Supreme W2W Heat PumpSystem Design and principle

Atecpool Supreme Water to Water Heat Pump

Atecpool Supreme highly efficient Water-to-Water heat pumps with advanced features and extremely quiet operation. Atecpool Water to Water heat pumps are designed with application flexibility that can be used for various purpose, like radiant floor heating, melting snow/ice, domestic hot water heating, temperature controlled water bodies, swimming pools and many other hydronics heating applications where a system of heating or cooling that involves the transfer of heat by a circulating fluid (as water or vapor) in a closed system of pipes.

Atecpool Supreme Water-to-Water Heat Pumps are available as heating only or with reversible operation for heating and cooling ATEC SPH series.

Atecpool Supreme ATEC SPH Series only for heating includes a special high temperature scroll compressor coupled with heat exchangers designed specifically for water heating, which provides unmatched efficiency and performance. The evaporator is a coaxial (tube-in-tube) Titanium heat exchanger that is capable of operation over a wide range of temperatures, and is more rugged than other types of evaporators. The condenser uses a close approach temperature brazed plate heat exchanger that is designed for high temperature operation. This combination of coaxial/brazed plate heat exchangers provides the best combination of durability and efficiency. Atecpool uses coaxial heat exchangers for evaporators. Brazed plate heat exchangers may be used for condensers when the unit is not reversible.

To / From Chilled Water Loop

Figure 1-4: Reversible Water-to-Water Heat Pump, Heating Mode

Compressor

Expansion Valve

ReversingValve

Source

To / From Distribution Line

Figure 1-5: Reversible Water-to-Water Heat Pump, Cooling Mode

Source

Compressor

ReversingValve

Expansion Valve

To / FromWater Body

To / FromWater Body

To / FromWater Body

ATECPOOL SUPREMO Water to Water Heat Pump Refrigerant Circuit


CompressorCoaxial Titanium HX(Evaporator)

Coaxial Titanium HX(Evaporator)


Titanium HX(Condenser)



Source

Expansion Valve

Atecpool Water to Water Heat Pump refrigerant circuit

177atecpool.com

Atecpool Supreme W2W Heat PumpSystem Design and principle

Heating Cycle – Atecpool Supreme ATEC SPH Series

Atecpool Supreme reversible water-to-water unit in heating mode with the addition of a reversing valve, the chilled water line source heat exchanger and heating system heat exchanger can change functions, depending upon the desired mode of operation. In the heating mode, the heating system heat exchanger functions as the condenser, and the chilled water loop source heat exchanger functions as the evaporator. ATEC SPH Series compressors have a wide operating map, which allows high temperature operation, up to 45°C leaving water temperature, even at 7°C chilled water line temperatures. Chilled water line heat exchanger is always an evaporator, but for reversible units, the evaporator and condenser change, depending upon operating mode, heating or cooling.

Cooling Cycle – Atecpool Supreme ATEC SPH Series

Atecpool Supreme reversible water-to-water heat pump now provides chilled water on the closed water circuit/ swimming pool side instead of hot water. The swimming pool side heat exchanger becomes the evaporator, and the chilled water line or bypassed line for other application source heat exchanger becomes the condenser. Because the evaporator is susceptible to freezing under adverse operating conditions (e.g. failed pump, controls problem, etc.), a coaxial (Tube-in-Tube) heat exchanger is used on the swimming pool side for reversible units. When selecting equipment for systems that require cooling, all aspects of the system design should be considered.



Compressor

Expansion Valve

ReversingValve

Source



Source

Compressor

ReversingValve

Expansion Valve

To / FromWater Body

To / FromWater Body

To / FromWater Body









Source

Expansion Valve



Compressor

Expansion Valve

ReversingValve

Source



Source

Compressor

ReversingValve

Expansion Valve

To / FromWater Body

To / FromWater Body

To / FromWater Body









Source

Expansion Valve

Atecpool Supreme ATEC SPH Series Water-to-Water Heat Pump, Heating Mode

Atecpool Supreme ATEC SPH Series Water-to-Water Heat Pump, Cooling Mode

178 atecpool.com

Atecpool Supreme W2W Heat PumpSPH27 to SPH46

Specifications

• Compact Water/water heat pump for indoor or outdoor installation.

• With suction gas cooled scroll compressor.

• With extensive tube in tube Titanium Heat Exchanger as tube evaporator and coaxial condenser.

• Refrigerant cycle with thermostatic expansion valve, filter, gas-liquid separator, high and low pressure switches.

• With efficient automatic defrosting by hot gas principle.

• Electric and terminal box. With control and Disturbance signaling.

• Heating regulator for mounting to the wall.

• Refrigerant as R410A.

Water Connections

• Water connections to be done on site.

• Heating and condensate connections of flexible pipes with external thread.

Condensate Connections

• The water connections and the drain pipelines must be protected against frost on site in freezing climates.

• Its always recommended and necessary for long distance to insulate the water pipes from W2W to water bodies for maintaining the heat.

ReferencesTw: Condensor output water temperature (ºC)Ts: Water source temperature (ºC)Pi: Power consumption of the whole unit (W)

Hc: Heating capacity (W)COP: Coefficient of Performance

Atecpool Supreme ATEC SPH Series

Atecpool water source heat pumps absorb heat (energy) from any water source and transfers it to the spa or the swimming pool.

The cold water on entry side may be used for cooling the unit. The units can be installed indoor or outdoor and have a low sound level and vibrations being reduced or avoided due to insulation inside the units and around the compressors as well as floating supports.

The compact design heat pump has built-in Copeland compressor, and Emerson thermal expansion valve to ensure it works smoothly.

Model ATEC SPH27

Tw (ºC) Ts (ºC) Pi (W) Hc (W) COP

30

10 2127 10704 5

15 2163 11829 5.5

25 2448 14850 6.1

Model ATEC SPH36


30

10 3110 15683.5 5

15 3308 18451 5.6

25 3224 16430 5.1

Model ATEC SPH46


30

10 3505 18616 5.1

15 3696 21419 5.3

25 3599 19123 5.3

Front view Side view

Dimension and structure of ATEC SPH27, SPH36, SPH46

3

4 470

720

650

25

Front side view

Front side viewFront side view

5

21267

1247

466

727

203 344

6

7 9

10

8

1. High/Low pressure gauge2. High/Low pressure gauge3. Light touch controller4. Door lock5. Door lock 6. Heating water output7. Heating water input8. Water source output9. Water source input10. Cable wiring

31

1370

341 34

4

42

5 6 7

740

820

483

1560

80

Left side view Front side view

Topt side view

1. Water source output2. Water source input3. Heating water output4. Heating water input5. High/Low pressure gauge6. Light touch controller7. High/Low pressure gauge

1. Water source input2. Water source output3. Heating water input4. Heating water output

5. Light touch controller6. Door lock7. Door lock8. Cable wiring

620

8

800

830

Left side viewFront side view

1 2 3 4

700

5 6

7

note: all dimensions in mm

1. Water source input

2. Water source output

3. Heating water input

4. Heating water output

5. Light touch controller

6. Door lock

7. Door lock

8. Cable wiring

179atecpool.com

Dimension and structure of ATEC SPH92

Specifications












Model ATEC SPH105


30

10 9331 47051 5

15 9924 55353 5.6

25 9673 49290 5.1


Model ATEC SPH75


30

10 6221 31367 5

15 6616 36902 5.6

25 6448 32860 5.1

Model ATEC SPH92


30

10 7176 37637 5.3

15 7471 43912 5.5

25 6669 36994 5.6

Model ATEC SPH150


30

10 10514 55849 5.3

15 11087 64256 5.8

25 10798 57368 5.3

Model ATEC SPH52


30

10 4255 21408 5

15 4327 23659 5.5

25 4895 29699 6.1

1. High / Low pressure gauge



4. Door lock

5. Door lock

Front view Rear viewTop view



8. Water source output


10. Cable wiring

3

4 470

720

650

25

Front side view


5

21267

1247

466

727

203 344

6

7 9

10

8


31

1370

341 34

4

42

5 6 7

740

820

483

1560

80


Topt side view




620

8

800

830


1 2 3 4

700

5 6

7

3

4 470

720

650

25

Front side view


5

21267

1247

466

727

203 344

6

7 9

10

8


31

1370

341 34

4

42

5 6 774

0

820

483

1560

80


Topt side view




620

8

800

830


1 2 3 4

700

5 6

7

3

4 470

720

650

25

Front side view


5

21267

1247

466

727

203 344

6

7 9

10

8


31

1370

341 34

4

42

5 6 7

740

820

483

1560

80


Topt side view




620

8

800

830


1 2 3 4

700

5 6

7


180 atecpool.com



Model ATEC SPH270


30

10 21527 112911 5.2

15 22413 131736 5.9

25 20006 110981 5.5

Model ATEC SPH360


30

10 28703 150548 5.2

15 29884 175648 5.9

25 26675 147974 5.5

Model ATEC SPH225


30

10 18662 94101 5

15 19849 110706 5.6

25 19345 98580 5.1

Specifications









Dimension and structure of ATEC SPH360Dimension and structure of ATEC SPH180


337

848

1460

337

1197Ø16

462225225512

780 780

20001100

70

997

1060

Side view Front viewSide view Front view



3

4 470

720

650

25

Front side view


5

21267

1247

466

727

203 344

6

7 9

10

8


31

1370

341 34

4

42

5 6 7

740

820

483

1560

80


Topt side view




620

8

800

830


1 2 3 4

700

5 6

7Top view

Top view1. Water source output







Model ATEC SPH180


30

10 13973 75039 5.4

15 15864 86122 5.4

25 17448 108648 6.2

181atecpool.com

Atecpool Supreme W2W Heat PumpMain Components

Compressor

High quality brand scroll compressor with R410A, R407C or R134A. Copeland Scroll™ technology remains at the forefront for W2W heat pump applications, impressing with its superior efficiency, proven reliability and durability.

Heat Exchanger

Heat exchanger tube in tube Titanium or 316L plate type. Titanium Tube-In-Shell heat exchangers are designed for both refrigerant to water & water to water applications. The internal helical coil is constructed with titanium tubing and enclosed in a Schedule 40 PVC shell. All internal materials are non-corrosive in seawater and will not leach toxic elements into the system water. Titanium helical coil / insulated PVC shell / use as heat exchanger or condenser / fresh or saltwater use compact design compression fittings for titanium to copper connectors / compatible with refrigerant, water or glycol.

LED Controller

With touch-screen LED display panel board, sensitive keypad. Auto mode and manual mode optional. Functions as heat pump thermostat, condensate overflow protection and LED status on the board.

Thermal Expansion Valve

Emerson’s TXVs are designed for a wide range of air conditioning, refrigeration, heat pump, and chiller applications. Regulate the rate of refrigerant flow into the evaporator. Stainless steel power element eliminates failures caused by corrosion.

4 Way Valve

Danfoss SAGINOMIYA 4-way-valve to adjust refrigerant flow direction for heating/cooling. A 4-way reversing valve is the key component to provide Heating or Cooling from the system to the closed water circuit by reversing the flow direction of refrigerant. The reversing valves are designed for W2W heat pump with capacity from 12 kW to 580kW. They are suitable for most refrigerants as R407C - R410A - R134A. The cycle inversion is initiated by a small solenoid pilot valve controlling the movement of a slider, which changes the direction of the refrigerant.

Flow switch

Stronger flow switch inside is optional

182 atecpool.com


ATEC SPH27 ATEC SPH36 ATEC SPH46 ATEC SPH52 ATEC SPH75 ATEC SPH92

Power (V/ph/Hz) 380/3/50 380/3/50 380/3/50 380/3/50 380/3/50 380/3/50

* Heating capacity (kw) 12 16,5 20,5 23 31 42

(BTU) 40942 56295 69942 78472 105766 143296

* Rated power input (kw) 2,7 3,6 4,6 5,2 7,5 9,2

Test condition Water source temp. (In / Out): 15ºC / 7ºC, Water temp. (In / Out): 15ºC / 28ºC.

** Heating capacity (kw) 10,5 14,8 18,5 22 28,5 37,5

(BTU) 35824 50495 63119 75060 97237 127943

**Rated power input(kw) (kw) 2,2 3 3,7 4,5 5,8 7,2

Test condition Water source temp. (In/Out):10ºC / 7ºC, Water temp. (In/Out):15ºC / 28ºC

Cooling capacity (kw) 9 12 15 18 24 30

(BTU) 30707 40942 51177 61413 81884 102355

Rated power input (kw) 2,1 2,8 3,6 4,2 5,7 7,1

Test condition Water source temperature: (In/Out): 25ºC / 30ºC, Water temperature: (In/Out): 35ºC / 28ºC.

Refrigerant R410A

Compressor (type) scroll

(number) 1 1 1 1 2 2

Evaporator (type) Tube in Tube heat exchanger

Condenser/heat exchanger (type) Titanium-in-PVC heat exchanger

Throttling device Emerson thermal expansion valve

Controller Light touch pad control panel

Required hot water flow rate (m3/h) 4,5 6 7,5 9 12 15

Required water source flow rate (m3/h) 1,8 2,45 3,2 4 5,6 6,4

water connection mm 50 50 50 50 63 63

Suggested tank capacity (t) 3 4 5 6 8 10

Noise dB(A) ≤40 ≤40 ≤42 ≤42 ≤44 ≤44

Max current (A) 7,5 10 13 15 21 25

Level again eletric shock I I I I I I

Water proof grade IPX4 IPX4 IPX4 IPX4 IPX4 IPX4

Max.water output temp. (Cº) 45

Water source temp. range (Cº) 5~35

Net weight (kg) 80 100 120 140 220 250

Net size (L*W*H) (mm) 690X620X840 790X620X850 790X620X850 790X620X850 700X720X1290 700X720X1290

Atecpool Supreme W2W Heat PumpSPH27 to SPH92 - Data sheet

183atecpool.com


ATEC SPH105 ATEC SPH150 ATEC SPH180 ATEC SPH225 ATEC SPH270 ATEC SPH360

Power (V/ph/Hz) 380/3/50 380/3/50 380/3/50 380/3/50 380/3/50 380/3/50

* Heating capacity (kw) 45 60 83,5 105 125 167

(BTU) 153532 204709 284887 340068 426500 614160

* Rated power input (kw) 11 13,8 20 22 30 36

Test condition Water source temp. (In/Out):15ºC / 7ºC, Water temp. (In/Out):15ºC / 28ºC.

** Heating capacity (kw) 40 54 77 93 115 152

(BTU) 136473 184238 262710 300945 392380 558996

**Rated power input(kw) (kw) 7,8 11,1 16 17,9 23 31,2

Test condition Water source temp. (In/Out):10ºC / 7ºC, Water temp. (In/Out):15ºC / 28ºC

Cooling capacity (kw) 33 45 60 67 90 120

(BTU) 112590 153532 204709 216810 307080 441313

Rated power input (kw) 10 10,8 14,3 20 21,4 36,4

Test condition Water source temperature: (In/Out): 25ºC / 30ºC, Water temperature: (In/Out): 35ºC / 28ºC.

Refrigerant R410A

Compressor (type) scroll

(number) 2 3 4 4 6 8

Evaporator (type) Tube in Tube heat exchanger

Condenser/heat exchanger (type) Titanium-in-PVC heat exchanger

Throttling device Emerson thermal expansion valve

Controller Light touch pad control panel

Required hot water flow rate (m3/h) 15 25 30 30 45 60

Required water source flow rate (m3/h) 7,6 9,6 12,8 24 24 25,6

water connection mm 63 75 75 75 75 110

Suggested tank capacity (t) 12 12 16 20 24 32

Noise dB(A) ≤44 ≤45 ≤45 ≤50 ≤50 ≤52

Max current (A) 29 37 49 82 83 98

Level again eletric shock I I I I I I

Water proof grade IPX4 IPX4 IPX4 IPX4 IPX4 IPX4

Max.water output temp. (Cº) 45

Water source temp. range (Cº) 5~35

Net weight (kg) 250 500 500 650 750 920

Net size (L*W*H) (mm) 700X720X1290 1560X840X1380 1560X840X1380 2400X900X1380 2400X900X1380 2000X1100X1460

Atecpool Supreme W2W Heat PumpSPH105 to SPH360 - Data sheet

note: please request for bigger capacity units with selection calculation

184 atecpool.com

ThermalecTitanium Electrical Heater

The Thermalec pool and spa heater range

Built using Titanium elements, to the same exact standards traditionally associated with Thermalec® heaters, the THR TITANIUM range fulfils all the required electrical safety standards.

Size range from 3kW to 168kW

• Unique spiral flow allows efficient heat removal from the elements, minimising the scale and sediment build up.

• Unique design ensures cooler water from the filter pump does not strike the elements directly (giving longer life).

• Air generated from the pump passes harmlessly around the sides of the baffles and across the top of the heater elements (heat pumps heat both air and water).

• The control thermostat is positioned to sense the incoming water temperature and controls the pool to within 1oC.

• The safety thermostat senses the water temperature leaving the heater.

• Thermalec® heaters can be used in conjunction with other heating systems to provide year round heating solutions for your pool or spa.

• Each heater is designed with its own simple self diagnostic system.

• Heating elements always submerged.

Materials of Construction

Heater vessel: Fusion epoxy coated cast iron

Element holding plate: uPVC

Gasket: Silicone rubber

Water connections: uPVC socket

Heater elements: Titanium sheath

Electrical enclosure: Powder coated steel

Standards

Thermalec® pool and Spa heaters are CE marked and comply with:

EU Council Directive 89/336/EEC & 93/068/EEC on Electromagnetic compatibility

EU Council Machinery Directive 98/37/EEC

EU Council Low Voltage Directive 2006/95/EEC & 72/23EEC

Harmonised Standards: EN55014, EN55104, EN5501, EN5502, CEI801-2, CEI801-3 and EN60335-2-35

Operating data

Water inlet/outlet: Socket for 50mm or 2” NB pipe

Max. Water temperature: 52°C heater outlet

Operating pressure: 2.0 bar max.

Ambient temperature: 40°C max.

Pool temp. control range: 15°C to 45°C

Thermostat operating diff.: 0.5 C°

Control and indication

Water temperature cut-out: Factory set to trip at water outlet temperature of 52°C. Manual reset on front fascia

Thermostats: Pressurised liquid filled capillary type

Pool temperature control: Analogue dial, calibrated 15°C to 45°C and graduated at 1C° intervals.

Mains indicator lamps: Red (mains power on), Amber (filter pump interlock power present.

Status indicator lamps: Red (heater ON/OFF switch ON), White (safety thermostat trip armed), Amber (pump interlock relay OK), Green (heating elements powered)

185atecpool.com

Power ratings of Thermalec® heater standard models

*based on standard power supply 230V/1 ph/50Hz or 400V/3ph/50Hz

Single phase power supply only. Single or three phase power supply. Three phase power supply only.

Standard Models - Installed nominal power rating (kW)*

Series Ref 3 4 6 7.5 8 9 10 12 15 16 18 21 24 30 36 48 60 72 84 96 108 120 144 168

12THR

24THR

36THR

72THR

120THR

ZENITH Ti

Feature Series Reference

12THR 24THR 36THR 72THR 120THR ZENITH Ti

Body in robust fusion epoxy coated cast iron

Elements in corrosion resistant Titanium

Suitable for sea and salt water pools and spas

Pressure: tested to 4 bar, operating 2 bar max.

Safety pressure relief valve(s)

Easy installation – uPVC solvent weld sockets

Easy element replacement

Water drain for winterisation or repair

Removable top plate for easy vessel inspection

Water flow direction easy to reverse

Premium quality electrical components

Heavy duty contactors

Liquid filled capillary control and safety thermostats

Power isolation ON/OFF switch

Power isolation circuit breakers

Filter pump safety interlock

Fused control circuit protection

Two stage temperature controller

Time delay switch powers elements in 2 stages



At least 6 indicator lamps to monitor operation

Analogue heater outlet water temperature indicator

Over-temperature safety trip with manual reset

Special design enclosure for spa applications

Enhanced “Deluxe” model available

Suitable for fish pond and aquarium use

Protection in the event of pool filter pump failure

Special models available for marine, central heating & renewable energy applications

Available for non-standard power supplies

CE Mark - compliant with all relevant EU Directives

Two year return-to-base guarantee

Standard feature Available as an option

The Thermalec pool and spa heater range - main features

The heaters in the Thermolec pool and spa heater range are classified in service a according to the body size.There are six series in the range. Each series o�ers a choice of nominal power rating. The following tables summarisethe main features of the range and power ratings available in each series.


The Thermalec pool and spa heater range - main features

The heaters in the Thermalec® pool and spa heater range are classified in series according to the body size. There are six series in the range. Each series offers a choice of nominal power rating. The following tables summarise the main features of the range and power ratings available in each series.

186 atecpool.com


Packed dimensions: 425 x 450 x 190mm

Packed weight: 26kg


Packed weight: 42kg

12THR Series (3kW - 12kW)


Water Flow Rate Ranges

3 kW 4 kW 6 kW 7,5 kW 9 kW 10 kW 12 kW

Max. (hard water) l/min 152 152 152 152 152 152 152

Max. (soft water) l/min 76 76 76 76 76 76 76

Minimum l/min 4.5 6 9 11 14 15 18


15 kW 18kW 20kW 24kW

Max. (hard water) l/min 303 303 303 303

Max. (soft water) l/min 152 152 152 152

Minimum l/min 23 27 32 36

Code Standard Power Supply: 230V/1ph/50Hz or 400V/3ph/50Hz

Load kW Current Amps 1-ph/3-ph

Elements(no. x nominal kW)

1-phase version 3-phase version

12THRX3 3 14/n.a. 1 x 3 kW Yes No



12THRX7.5 7.5 33/11 3 x 2.5 kW Yes Yes

12THRX9 9 40/13 3 x 3 kW Yes Yes

12THRX12 12 53/17 3 x 4 kW Yes Yes

Code Standard Power Supply: 400V/3ph/50Hz

Load kW Current Amps Elements(no. x nominal kW)

24THRX15 15 22 6 x 2.5 kW

24THRX18 18 26 6 x 3 kW

24THRX21 21 31 3 x 4 kW + 3 x 3 kW

24THRX24 24 35 6 x 4 kW

390

630

210

260to wall

175to floor

390

630

210

260to wall

175to floor

24THR

187atecpool.com




30 kW 36 kW

Max. (hard water) l/min 300 300

Max. (soft water) l/min 150 150

Minimum l/min 46 55


Load kW

Current Amps


36THRX30 30 44 3x4 kW + 6x3 kW

36THRX36 36 53 9x4 kW


Packed weight: 52kg



48 kW 60 kW 72 kW

Max. (hard water) l/min 300 300 300

Max. (soft water) l/min 150 150 150

Minimum l/min 73 91 109


Load kW Current Amps


72THRX48 48 73 12x4 kW

72THRX60 60 91 15x4 kW

72THRX72 72 108 18x4 kW


Packed weight: 81kg

430

630

390

380to wall

175to floor

270

360

390

300to wall

175to floor



84 kW 96 kW 108 kW 120 kW

Max. (hard water) l/min 700 700 700 700

Max. (soft water) l/min 350 350 350 350

Minimum l/min 127 146 164 182


Load kW

Current Amps


120THRX84 84 122 21x4 kW

120THRX96 96 140 24x4kW

120THRX108 108 157 27x4 kW

120THRX120 120 174 30x4 kW


Packed weight: 140kg

645

390

630

150to floor

580

120THR

188 atecpool.com

DanthermDehumidification

CDP Pool Dehumidification - Efficient dehumidification for aggressive environments

Fully automatic operations

The small units are fully automatic. They are supplied with electronic control, built in adjustable hygrostat and a visual display showing the display modes.

The large units are supplied with electronic control and prepared for external hygrostat connection. An electronic module provides a visual display of working modes while the control panel provides push button selection of air heating and continuous fan run. The control panel can be moved to either side of the unit to suit plant room configuration..

Function

An integral fan draws humid air into the dehumidifier through a filter. Here the air passes through an evaporator, where the water vapour condenses on a cold surface and falls as water droplets, into the drip tray and then into the drain. The cooled air then passes through a condenser and picks up not only the heat equivalent of the previous cooling, but also the heat equivalent of the electrical input to the unit. Consequently, the air leaves the unit drier and several degrees warmer. The repeated circulation of air through the unit reduces the relative humidity, giving very rapid but gentle drying.

In swimming pool halls with large window areas, a solution where the dehumidified and warm supply air is led through pipes under the floor and blown under the windows is a reliable choice. In this way condensing of the windows can be avoided.

Remote control DRC1

A newly developed remote control allows reading and setting of relative humidity and temperature, alarms and service information.

Wall Mounted Version CDP 40/50/70

Wall mounted version CDP 40/50/70

CDP 40/50/70 units are designed for installation

directly in the pool hall or area to be dehumidified.

Technical data CDP 40/50/70

Dehumidification capacity at 28°C /

60% RH l/24h

Air flow(m³/h)

Operating range /humidity %RH

Operating range /temperature (°C)

Weight (kg)

CDP 40 34 400 40 - 100 10 - 36 56

CDP 50 52 680 40 - 100 10 - 36 65

CDP 70 69 900 40 - 100 10 - 36 75

Dimensions CDP 40/50/70

Height (mm)

Width (mm)

Depth (mm)

CDP 40 770 1010 326

CDP 50 770 1160 326

CDP 70 800 1495 326

Applications CDP and CDP (T)• Swimming pools

• Spas

• Shower rooms

• Gymnasia

• Larger private pools

• Hotel pools and spas

Quick selection guide

0 20 40 60 80 100 120

CDP 125

CDP 165

CDP 75

CDP (T) 70

CDP (T) 50

CDP (T) 40

Swimming pool surface - m²

Technical data CDP(T) 40/50/70/75/125/165

Which unit to choose in a swimming pool hall depends on the surface area. This graph is intended as a guide only, providing approximate recommendations.The selection of the correct dehumidifier for swimming pool halls requires that several factors are taken into account, e.g. air and water temperatures, usage levels and whether a floating cover is used.

Please consult your supplier for professional guidance as unit selection should be carried out only by qualified personnel to get an optimum solution.

189atecpool.com

DanthermDehumidification

CDP Pool Dehumidification - Efficient dehumidification for aggressive environments

Ducted version CDP 75/125/165

Flexible installation of the CDP

The CDP units are highly flexible regarding installation. They are designed for installation in plant rooms, with ducted supply and return air, but can also be installed directly in the room that needs dehumidification. A range of options are available for the CDP to meet individual requirements, including heating coils, outdoor air connection, wall-mount kit and floor mount kit. The CDP is also available with a water-cooled condenser allowing the excess heat to be used for pool or domestic hot water. The fresh air discharge can be from the top or from the side opposite to the air inlet. Both evaporator and condenser coils are epoxy-coated for higher corrosion resistance.

Features and benefits

• High quality product manufactured to exact standards

• Low energy consumption and impressive functionality

• Silent operation

• Pleasant design

• Easy to operate and control

• Designed to suit any plant room configuration

• Epoxy-coated coils

The humid air from the water surface passes through a dehumidifier,

leaving the supply air drier and several degrees warmer.

Technical data CDP 75/125/165


60% RH l/24h

Air flow(m³/h)



CDP 75 74 1500 40 - 100 20 - 38

CDP 125 124 2500 40 - 100 20 - 38

CDP 165 162 3600 40 - 100 20 - 38

Dimensions CDP 75/125/165

Heght (mm)

Width (mm)

Depth (mm)

Weight (kg)

CDP 75 650 1155 725 130

CDP 125 850 1300 900 160

CDP 165 975 1400 1010 190

Through-Wall Mounted Version CDP (T) 40/50/70

Ducted Version CDP 75/125/165

Through-wall mounted version CDP (T) 35/45/65

Technical data CDP (T) 40/50/70


60% RH l/24h

Air flow(m³/h)



Weight (kg)

CDP 40T 29 250 40 - 100 10 - 36 60/57

CDP 50T 42 500 40 - 100 10 - 36 74/68

CDP 70T 66 750 40 - 100 10 - 36 101/95

Dimensions CDP (T) 40/50/70

Height (mm)

Width (mm)

Depth (mm)

CDP 40T 680 890 290

CDP 50T 680 1192 290

CDP 70T 680 1735 290

CDP(T) 35/45/65 units are designed for installation in an

adjacent room and are supplied with a thorough-the-wall

duct kit with supply and return air grills.

190 atecpool.com

Note: Please ask for selection of Heat Exchanger for your pool.

Selection chart/datasheet on request.

Pool HeatingPlate Type Heat Exchangers

Standard Plate Heat Exchangers AISI 316 / AISI 316L

Atecpool offers Plate Type heat exchangers, copper brazed, semi-welded and all welded plate heat exchangers. With the big range of plate type heat exchangers. Atecpool has got the optimal technical solution for any possible task, with connection sizes from: Ø15mm - Ø500mm covering a liquid flow of 50l/hours - 2000 m3/hour.

Advantages

• The plates and plate patterns are constructed to obtain a high thermal efficiency with a low pressure drop

• There are two pattern designs available with different pressing angles giving respectively high/low turbulence flow, dependant on the given selection

• The inlet channels allow for maximum strength in the inlet area, whilst maintaining minimum of contact points, reducing blockage at the flow distribution zone

• The inlet design ensures even distribution of the liquids across the heating surface

• The gasket is placed in a dedicated retaining gasket groove. This secures the elasticity of the gasket even after a long time of compression

Plate Design

The construction of the inlet part makes a perfect distribution of the liquids across the heating surface. The inlet part is increased and supplied with grooves preventing “dead spots” which may cause the growth of bacteria in the plate heat exchanger. The inlet with grooves secures a strong inlet part with a minimum of contact points.

The inlet parts are constructed with a leakage drained zone fufilling the AAA specifications.

The heat transfer plates are designed with a gap between plates up to 11mm depending on the plate type. Because the pattern of the plate pressing is horizontal waves maintaining no “plate contact points” in the flow direction, the flow channels remain free of obstacles allowing the media / particles to flow freely.

Hightlights:• High operation safety

• Exact energy-transfer

• Low running costs

• Energy saving

• Environment-friendly

Head

Tie bolts

Lower bar

Plate package

Follower

Upper headColumn

POOL HEATING - atecpool.international€¦ · Atecpool Supreme ATEC SPH Series only for heating...

Documents

Transcript of POOL HEATING - atecpool.international€¦ · Atecpool Supreme ATEC SPH Series only for heating...