u

u

Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015 1

International Conference

Polymeric Materials

in Automotive PMA 2015&

Slovak Rubber Conference 2015

PROGRAM

LIST OF PARTICIPANTS

May 26 - 28, 2015

Congress Centre Hotel Park Inn Danube

Bratislava, Slovak Republic

Organised by: Slovak University of Technology Faculty of Chemical and Food Technology Institute of Polymer Materials

Polymer Institute Slovak Academy of Sciences

2 Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015

International ConferencePolymeric Materials

in Automotive PMA 2015&

Slovak Rubber Conference SRC 2015

ProgramTuesday (May 26, 2015)PMA 2015 & SRC 2015

Chairperson Ivan CHODÁK

10.00–10.15 Opening ceremony

10.15–11.00 Opening Invited Lecture

Štefan KLEIN AEROMOBILE - materials and development

11.00–11.45 Invited Main lecture Mohini M. SAIN Light-weighting for Automotive Industry

11.45–12.30 Invited Main lecture Frank CHARLES Advanced Technology of FE-SEM with Low kV Imaging for Functional Materials

12.30–14.00 Lunch

Chairperson Claus WRANA

14.00–14.45 Invited Main Lecture Toshio NISHI Polymer Nanotechnology for Advanced Elastomers

14.45–15.30 Invited Main Lecture Robert SCHUSTER

Increased Performance of speciality rubbers by Ionic Liquids

15. 30–16.00 Coffee Break

Chairperson Ulrich GIESE

16.00–16.30 Invited Lecture Joachim SUNDER Lab test procedures – valuable finding through lab tests for processing

16.30–17.00 Invited Lecture Libor HEGER Continental Matador Rubber, s.r.o. - focus R&D

17.00–17.30 Invited Lecture Tomáš DVOŘÁK Equipments for testing laboratory by JD Dvořák

17.30–18.30 Poster Session

Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015 3

List of Posters

1.Kamila WITOWSKA, Jacek ANDRZEJEWSKI

THE INFLUENCE OF MALEIC ANHYDRIDE ADDITION ON THE MECHANICAL PROPERTIES OF PP/BUCKWHEAT HUSK COMPOSITES

2.

Ján BOČKAJ,RoderikPLAVEC, Leona KALIŇÁKOVÁ, Zuzana VANOVČANOVÁ,Jozef FERANC,Dagmara PERĎOCHOVÁ

INFLUENCE OF ADDITIVES ON CRYSTALLIZATION OF POLYLACTIC ACID

3.

Lenka BUŇOVÁ,Darina ONDRUŠOVÁ, Mariana PAJTÁŠOVÁ, Michaela ĎURČEKOVÁ, Slavomíra DOMČEKOVÁ

INFLUENCE OF PARTICLE SIZE OF FILLERS BASED ON CLINOPTILOLITE ON THE PROPERTIES OF POLYMERIC MATERIALS

4.

Ľudmila ČERNÁKOVÁ, Mária HNÁTOVÁ, Magdaléna WOLFOVÁ, Monika BOTOŠOVÁ

MODIFICATION OF POLYPROPYLENE NONWOVEN WITH CYCLODEXTRINS AND CITRIC ACID AS CROSSLINKING AGENT

5.

Slavomíra DOMČEKOVÁ, Darina ONDRUŠOVÁ, Mariana PAJTAŠOVÁ,Zuzana MIČICOVÁ,Michaela ĎURČEKOVÁ and Lenka BUŇOVÁ

APPLICATION OF MODIFIED ALTERNATIVE FILLER IN THE RUBBER COMPOUNDS

6.Rastislav DOSOUDIL and Mariana UŠÁKOVÁ

MAGNETIC AND MICROWAVE ABSORPTION PROPERTIES OF COMPOSITES FOR SHIELDING PURPOSES IN VEHICLES

7.Slávka ĎURKÁČOVÁ, Martin DANKO,Jaroslav MOSNÁČEK

PREPARATION OF FUNCTIONAL COPOLYMERS OF �-METHYLENE-?-BUTYROLACTONE AND ?-CAPROLACTONE

8.

Jozef FERANC,Adriana MIKULAJOVÁ, Roderik PLAVEC,Katarína TOMANOVÁ,Leona KALIŇÁKOVÁ,Zuzana VANOVČANOVÁ,Ján BOČKAJ, Pavol ALEXY and Ida VAŠKOVÁ

STUDY OF THE INFULENCE OF SLIP AGENTS ON PROPERTIES OF BIODEGRADABLE BLENDS BASED ON PLA/PHB

9.

Hidetoshi HIRAHARA,Jing SANG, Sumio AISAWA, Miura KATSUYA,Jan ORAVEC, Jozef PRETO, Jan Hronkovic and Pavol MELUS

IMPROVEMENT OF THE ADHESION OF UNVULCANIZED NR BLENDS TO CARBON-STEEL VIA SURFACE MODIFICATION

10.

Mária HNÁTOVÁ,Dagmara PERĎOCHOVÁ, Monika MICHLIKOVÁ,Dušan BAKOŠ

SURFACE MODIFICATION OF POLYURETHANE NONWOVEN LAYER BY PLASMA TREATMENT

11.

Ján HRONKOVIČ,Jozef PREŤO,Vladimír VANKO,Ivan HUDEC, Ivan CHODÁK

ANTIOXIDANT EFFECT OF LIGNOSULFONATE IN SIDEWALL RUBBER COMPOUND

4 Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015

12.Ján HRONKOVIČ, Jozef PREŤO, Jan Oravec, Juraj VEREŠ and Ivan CHODÁK

THE APPROPRIATE COMPOSITION TO MODIFY RUBBER CRUMB AND ITS APPLICATION IN RUBBER COMPOUNDS

13.

Leona KALIŇÁKOVÁ, Roderik PLAVEC,Katarína TOMANOVÁ,Ján BOČKAJ,Zuzana VANOVČANOVÁ and Jozef FERANC

THE INFLUENCE OF INORGANIC FILLERS ON MECHANICAL PROPERTIES OF BIODEGRADABLE POLYMER BLENDS BASED ON POLYESTERS

14.

David MANAS, Miroslav MANAS, LenkaGAJZLEROVA,Michal STANEK, Martin OVSIK, Martin BEDNARIK, Jan NAVRATIL and Ales MIZERA

EFFECT OF LOW DOSES BETA IRRADIATION ON MECHANICAL PROPERTIES OF SURFACE LAYER OF INJECTION MOULDED POLYBUTYLENE TEREPHTHALATE (PBT)

15.

Zuzana MIČICOVÁ,Mariana PAJTÁŠOVÁ,Darina ONDRUŠOVÁ, Slavomíra DOMČEKOVÁ and Lukáš RANÍK

THE INFLUENCE OF SELECTED FILLERS ON TREAD COMPOUNDS PROPERTIES

16.Zuzana NÁDVORNÍKOVÁ, Miroslav VEČEŘA, Numan ALMONASY

THE USE OF COVALENTLY BOUND STABILIZERS IN POLYMER CHEMISTRY

17.

Jan ORAVEC, Jozef PRETO ,Pavol MELUS ,Michal ORAVEC andAlena KNAZEOVA

EVALUATION OF THERMOPLASTIC STARCHES AS COMPONENT OF RUBBER BLENDS

18. Zdeno PLEVÁKPOTENTIAL ACTIVATORS OF ADHESION OF REINFORCEMENT MATERIALS TO RUBBER

19.

Silvia PODHRADSKÁ,Matej MIČUŠÍK, Mária ŠIVOVÁ, František IVANIČ, Ivan CHODÁK

CORRELATION OF ELECTRICAL CONDUCTIVITY AND MECHANICAL PROPERTIES OF ELECTROCONDUCTIVE COMPOSITES BASED ON ELASTOMERIC OR THERMOPLASTIC MATRICES

20.

Jozef PREŤO, Ján HRONKOVIČ,Ján ORAVEC, Pavol MELUŠ,Dušan KOVÁČIK,Mirko ČERNÁK, Hidetoshi HIRAHARA and San Jing

SURFACE MODIFICATION OF CARBON-STEEL BY DCSBD PLASMA FOR IMPROVING GREEN RUBBER BLEND ADHESION

21.Franky PUYPE,Jiri SAMSONEKand David GREBENICEK

MASS SPECTRAL PROFILING OF ELEMENTS IN POLYMERS AND RUBBERS BY INDUCTIVELY COUPLED PLASMA – MASS SPECTROMETRY AND HYPHENATED SPECIATION ANALYSIS: A COMBINED ANALYTICAL AND EXPERIMENTAL STUDY

22.

Michaela SEDNIČKOVÁ, Daniela JOCHEC MOŠKOVÁ, Ivica JANIGOVÁ, Ľuboš JANKOVIČ, Zuzana NÓGELLOVÁ, Ivan CHODÁK

NATURAL RUBBER WITH MONTMORILLONITES AS THE COMPOSITES

23.

Petra SKALKOVÁ,Peter POČAROVSKÝ,Peter ČAKÁNEK,Mariana PAJTÁŠOVÁ, Eleonóra BENČÍKOVÁ

USING OF TPE WASTE IN BLENDS WITH NATURAL RUBBER

Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015 5

Wednesday (May 27, 2015)Slovak Rubber Conference SRC 2015

Chairperson Wilma DIERKES

9.00 – 9.30 KL SUNDER Joachim Universal rheological tools for a better prediction of the processing behaviour of elastomers

9.30 – 10.00 KL DICK John Effects of Variation in Strain Measurements with the Extended Dynamic Range (EDR) of the RPA on the Accuracy of Shear Thinning Measurements for Rubber Compounds

10.00 – 10.20 CL WEIDENHAUPT Hermann-Josef

Vulkanol P – a new processing plasticizer

10.20 – 10.50 Coffee Break

Chairperson Winfried KUHN

10.50 – 11.20 KL DIERKES Wilma Devulcanization – short –loop recycling of passenger car tires

11.20 - 11.40 CL LIPOVSKÝ Peter Technology HOMATECH -W for processing rubber waste and tires

11.40 – 12.00 CL HASSE Andre Si 363 – Mixing and compounding strategies for maximum performance

12.00 – 12.20 CL SANG Jing Carbon-steel surface modification and special analysis of surface composition

12.30 – 14.00 Lunch

Chairperson Toshio NISHI

14.00 – 14.30 KL BREJCHA Jiří Alternative sources of Natural rubber - TKS a Guayule

14.30 – 14.50 CL VAŠKOVÁ Ida The properties of rubber composites with content of corn starch

14.50 – 15.10 CL KARL Christian Wolfgang Friction and wear of elastomer composites

15.10 - 15.40 KL DROBNÝ George Thermoplastic elastomers in automotive industry – what´s new

15.40 – 16.00 Coffee Break

Chairperson Andre HASSE

16.00 – 16.30 KL DAS Amit Commercial rubbers to sensors, actuators and self-healing rubbers

16.30 – 16.50 CL ŠPITÁLSKÝ Zdenko Electrically conductive composites based on an elastomeric matrix filled with expanded graphite as a potential oil sensing material

16.50 – 17.10 CL KRUŽELÁK Ján Sulphur and peroxide cured rubber sites with incorporated magnetic filler

17.10 - 17.30 CL SÝKORA Richard Thermo-oxidative ageing of magnetic composites based on NBR

Wednesday (May 27, 2015) Plastics in Automotive PMA 2015

Chairperson Pavol ALEXY

9.00 – 9.30 KL MAŇAS Miroslav Effect of beta irradiation on mechanical properties of surface layer of injection moulded HDPE

9.30 – 10.00 KL PRENZER Timo Innovative engineering plastics of BASF

10.00 –10.20 CL MOSNÁČKOVÁ Katarína Electrical and nanomechanical properties of poly(methyl methacrylate)/multiwalled carbon nanotubes composites as a function of preparation methods

10.20– 10.50 Coffee Break

6 Polymeric Materials in Automotive PMA 2015 & Slovak Rubber Conference SRC 2015

Chairperson Zdenko ŠPITALSKÝ

10.50 – 11.20 KL ALEXY Pavol Biopolymer blends with improved mechanical and thermal properties

11.20 – 11.40 CL HÁZ Aleš Stability of the lignin usable in production of bioplastics

11.40 – 12.00 CL VALENTÍN Marian Study of nanomechanical properties of plasma treated poly(lactic acid) samples with different crystallinity content

12.00 – 12.20 CL PLAVEC Roderik Mechanical and rheological properties of biodegradable polymer blends based on biopolyesters

12.30– 14.00 Lunch

Chairperson Dušan BAKOŠ

14.00 – 14.30

KL COLAMARTINO Savino Metal replacement by light weight plastic solutions

14.30 – 14.50 CL NOVÁK Igor Adhesive, surface and electrical properties of Ni-based composites

14.50 – 15.10 CL TIŇO Radovan Effect of low temperature atmospheric plasma with runaway electrons (ADRE plasma) on the wettability and activation of natural polymer surfaces

15.10 – 15.40 KL HAD Michal Measurement of physical properties in industry

15.40 – 16.00 Coffee break

Chairperson Miroslav MAŇAS

16.00 – 16.30 KL KHUNOVÁ Viera Biodegradable polymer nanocomposites based on natural nanotubes: effect of magnetised halloysite on structure and properties of polycaprolactone

16.30 – 16.50 CL SAMSONEK Jiří Polyester cord fabrics: influence of titanium dioxidenucleating agent quality on final mechanical properties

16.50 – 17.10 CL BUDZÁK Martin STERED® - a unique technology for material reprocessing of textile wastes originated from automotive industry

17.10 - 17.30 CL UJHÉLYIOVÁ Anna Technical polypropylene fibres with inorganic additives

Thursday (May 28, 2015)PMA 2015 & SRC 2015

Chairperson Ivan HUDEC

9.00 – 9.45 SAKURAI Satoshi(Invited Main Lecture)

Approach to Functional Materials’ Measurement with Solid State NMR

9.45 – 10.15 KL KUHN Winfried Investigation of molecular dynamics in crosslinked polymers using NMR methods - crosslinking, aging, filler-matrix interactions

10.15 – 10.45 KL PUYPE Franky The enhancement of combining reactive and non-reactive pyrolysis sample introduction methods hyphenated with gas chromatography and mass spectrometry for the composition analysis of complex polymer structures

10.45 – 11.15 Coffee break

Chairperson Robert SCHUSTER

11.15 – 12.00 WRANA Claus(Invited Main Lecture)

Advanced thermal and dynamic-mechanical methods for the characterization of tire properties

12.00 – 12.45 GIESE Ulrich(Invited Main Lecture)

Aging stability of NBR and HNBR elastomers – chemical reactions and measures

12.45 – 13.15 Wang Runguo(Invited Lecture)

Bio-based elastomers for enigneering applications for silica compounds

13.15 – 13.30 Conference Closing Ceremony

13.30 – 14.30 Lunch

CL - contributed lecture KL - key lecture