Polyester and alkyd resins in Western Europe
1
with a 50 per cent mast~rbat~h content. After conditioning, addition levels can usually be reduced to 2-3 per cent PE9396 or 1.5-2 per cent PE9361, de~nding on polymer type and formulation. ~~~~~~: Cu&X P~~t~~s ~~te~~~~~~~~, tes P~~~~~s A3, Aveme des ~l~~~es II, B”~2~ Brussels, Belgian. Tel: -t-32-2-774-14-11, Fax: + 32-2- 771-23-62. Release agents KantStick Q Powder and K~tS~~ S Powder are internal lubricants, designed to increase the ffow of ~ermopiastic resins into the deeper recesses and areas of the mould cavity. KantStick S Powder can also be used to assist in the release of mouldings in processes such as extrusion Galendering~ blow and injection moulding, using all types of thermoplastic resin systems. Both KantStick Q and KantStick S Powders are ~proved for use as lubricants in the fabrication of various plastic food contact articles, ~~~~~~~: S~e~~~~i~ P~~d~~ts ~~~~ny, 75 ~~~tg~~~~ street, Jersey city, NJ 07303- U306, USA. Tel: -I- I-2~~-434~4~~. f;irx: +l- 201-434-6052, Silicon compounds in the USA G Path~nder report from TPC cosines Research Group predicts that ~rn~h in this sector witf be focused on the development of new appli~tions rather than in the expansion of existing markels, Silicone eiastomers, (silicone rubbers) will experience the highest growth with an average annuat rate of 8.7%. Liquid, two- com~rtme~t, heat-cured silicone ruhbers that can be jnjection-mounded, offer the most promise. This Pathfinder report provides primary market data for the three major silicon compounds groups: silicates, silicon alloys, and silicones. AppIiGation markets anaIyzed and forecast by the study include: desiccants/ catalysts, soaps/detergents, paints/coatings, professing aids, a~esives~binders, steel, cast iron, aluminium, superaIIoys~ rnis~ell~~us altoys, construction, transpo~ation, electrical/ electronics, industrial, chemicaf processing, househo~d/~rsonaI, and medical. It presents a concise, detaifed anaiysis of silicon compounds in the US with emphasis on: materiaIs and te~hnology~ applications markets, m~k~ing, competitive analysis, and company profiles. Polyester and alkyd resins in Western Europe A second Pathfinder repmt from the TPC Business Research Croup provides market analyses for each of the following resin product groups: saturated polyesters; unsa~rated polyesters; u~odi~ed alkyds; and alkyds modified with styrene, isocyanate, and silicone. Applications covered in the report include: inks; paly-ure~~es, glass- reinforced pl~~~~paints ~maintenan~e/~~~~ generaf industrial, wood coatings, vehicfe finishings, marine coatings, and construction); and other applications. The study presents separate market data and forecasts for the following eight territories: Benelux, France, Germany, Iberia, Italy, UK, remainder of the EC, and the remainder of Western Europe. The report, reference PF #9104 is priced at $S,C@O (SFr. 7,X@) and is available from: TPC Bminess Research Group, ~at~~~er ~~er~t~~~s, 8.51 New ~~~~u~d Averme, Box 3535, ~~~~~st~~* PA 17~4, USA. Tet: -t-f- 717-29~-56~9. Fm: + f-71 7-295-4538, or @I993 Etsevier Science ~bIishers Ltd 3
Transcript of Polyester and alkyd resins in Western Europe
with a 50 per cent mast~rbat~h content. After conditioning, addition levels can usually be reduced to 2-3 per cent PE9396 or 1.5-2 per cent PE9361, de~nding on polymer type and formulation. ~~~~~~: Cu&X P~~t~~s ~~te~~~~~~~~, tes P~~~~~s A3, Aveme des ~l~~~es II, B”~2~ Brussels, Belgian. Tel: -t-32-2-774-14-11, Fax: + 32-2- 771-23-62.
Release agents
KantStick Q Powder and K~tS~~ S Powder are internal lubricants, designed to increase the ffow of ~ermopiastic resins into the deeper recesses and areas of the mould cavity. KantStick S Powder can also be used to assist in the release of mouldings in processes such as extrusion Galendering~ blow and injection moulding, using all types of thermoplastic resin systems. Both KantStick Q and KantStick S Powders are ~proved for use as lubricants in the fabrication of various plastic food contact articles, ~~~~~~~: S~e~~~~i~ P~~d~~ts ~~~~ny, 75 ~~~tg~~~~ street, Jersey city, NJ 07303- U306, USA. Tel: -I- I-2~~-434~4~~. f;irx: +l- 201-434-6052,
Silicon compounds in the USA
G Path~nder report from TPC cosines Research Group predicts that ~rn~h in this sector witf be focused on the development of new appli~tions rather than in the expansion of existing markels, Silicone eiastomers, (silicone rubbers) will experience the highest growth with an average annuat rate of 8.7%. Liquid, two- com~rtme~t, heat-cured silicone ruhbers that can be jnjection-mounded, offer the most promise.
This Pathfinder report provides primary market data for the three major silicon compounds groups: silicates, silicon alloys, and silicones. AppIiGation markets anaIyzed
and forecast by the study include: desiccants/ catalysts, soaps/detergents, paints/coatings, professing aids, a~esives~binders, steel, cast iron, aluminium, superaIIoys~ rnis~ell~~us altoys, construction, transpo~ation, electrical/ electronics, industrial, chemicaf processing, househo~d/~rsonaI, and medical.
It presents a concise, detaifed anaiysis of silicon compounds in the US with emphasis on: materiaIs and te~hnology~ applications markets, m~k~ing, competitive analysis, and company profiles.
Polyester and alkyd resins in Western Europe
A second Pathfinder repmt from the TPC Business Research Croup provides market analyses for each of the following resin product groups: saturated polyesters; unsa~rated polyesters; u~odi~ed alkyds; and alkyds modified with styrene, isocyanate, and silicone. Applications covered in the report include: inks; paly-ure~~es, glass- reinforced pl~~~~paints ~maintenan~e/~~~~ generaf industrial, wood coatings, vehicfe finishings, marine coatings, and construction); and other applications. The study presents separate market data and forecasts for the following eight territories: Benelux, France, Germany, Iberia, Italy, UK, remainder of the EC, and the remainder of Western Europe.
The report, reference PF #9104 is priced at $S,C@O (SFr. 7,X@) and is available from: TPC Bminess Research Group, ~at~~~er ~~er~t~~~s, 8.51 New ~~~~u~d Averme, Box 3535, ~~~~~st~~* PA 17~4, USA. Tet: -t-f- 717-29~-56~9. Fm: + f-71 7-295-4538, or
@I993 Etsevier Science ~bIishers Ltd 3
