POLY-ROUND SPHERICAL BEARINGS - Poly-Round Inserts.pdfPOLY-ROUND® SPHERICAL BEARINGS Solid Polymer...
Transcript of POLY-ROUND SPHERICAL BEARINGS - Poly-Round Inserts.pdfPOLY-ROUND® SPHERICAL BEARINGS Solid Polymer...
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-1
POLY-ROUND®
SPHERICAL BEARINGS
Solid Polymer Self-aligning Bearing Inserts Greaseless, one-piece plane bearings offer reliable operation in locations where ball bearings with lubrication are a problem.
� Greaseless bearing eliminates issues of lubrication � Dimensionally interchange with all industry-standard self-aligning insert bearings � Variety of materials for optimum performance in different applications � USDA/NSF accepted � Available for all inch and metric sizes � Non-contaminating and corrosion-resistant � Styles available for high and low temperatures
FA material: Direct food contact and
high temperature capable
Standard Poly-Round® Narrow Poly-Round® Split style Poly-Round®
IDEAL FORHACCP PROGRAMS
DARK BLUE 0112
EDT GUARANTEES Poly-Round® bearing with sleeve to operate for 12 months of zero-maintenance wear on modular plastic- and wire-belt conveyors (wet or dry applications).
Poly-Sphere®
C-2 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Double the life of Poly-Round® plane bearings by rotating the bearingUsable life of EDT plane bearings can be directly correlated to the thickness of the polymer.
DARK BLUE 0412
Flip bearing insert 180º to fully utilize the polymer.
Poly-Round® has two anti-rotation slots at 180º
Fig 2Fig 1
Features of Poly-Round® spherical OD (‘self-aligning’) bearings � No grease – eliminate problems associated with grease: viscosity, contamination, expense, labor � Entire polymer unit is bearing (translates to longer usable life) � Variety of polymer materials offer various properties; choose the optimum for the application � Retrofit insert ball bearings (check operating conditions) � Predictable wear allows planned maintenance rather than emergency replacement � Ideal for HACCP and other maintenance programs: bearing construction is completely sanitary
Compare the Cost of Ownership of a Poly-Round® bearing versus other alternatives
(See page C-10)
EDT Corp 1006-J NE 146th Street, Vancouver, WA 98685 USA
PHONE 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected]
COMPARE THE COSTS OF OWNERSHIP OF
EDT NA Poly-Round® Solution® Bearings
ON STRAIGHT RUN MODULAR PLASTIC OR WIRE BELT CONVEYORS
EDT bearings save money, time, and labor!
0513
Poly-Round® Solution® bearings are GUARANTEED for 12 months of zero maintenance life on
modular plastic belt conveyors, wire belt conveyors, idler rolls, single pivot dumpers.
Cost of EDT NA Poly-Round® Solution®
(Poly-Round® polymer insert in polymer housing)
over 1 year
Cost of original bearing
(Non-corrosive ball bearing in polymer housing)
over 1 year
Original bearing cost $ 795.08 per bearing over 2 years ($397.54 + 397.54 = $795.08)
versus EDT bearing cost $ 265.00 per bearing over 2 years ($197 + $68 = $265)
2-YEAR SAVINGS $ 530.08 x 4 bearings per machine = $2,120.32 savings
Cost to purchase EDT bearing & housing
NA2GC7-1-LK
$ 167.00
Cost to install EDT bearing
Labor (1 hour at $30/hr)
$ 30.00
Cost to lubricate EDT bearing
No lubricant needed
0
Cost to change out
EDT components
No replacement
needed in first year
0
Year 1Cost for 2 total change-outs plus lubrication $397.54
Year 1Cost of bearing assembly
$197.00
Original bearing cost $ 397.54 per bearing over 1 year
versus EDT bearing cost $ 197.00 per bearing over 1 year
FIRST-YEAR SAVINGS $ 200.54 x 4 bearings per machine = $802.16 savings
Year 2Cost of new bearing ($114.17 x 2),
lubrication ($109.20), installation ($30 x 2) $397.54
Year 2Replace insert (p/n NAIUCO-C $38), lubrication ($0),
installation ($30) Note: Re-use housing & sleeve $68.00
Based on re-using
housing and sleeve,
and replacing only the
insert every 12 months
Based on replacing
bearing and housing
every 6 months
Cost to purchase original bearing & housing
F2BSCEZ100
$ 114.17
Cost to install original bearing
Labor (1 hour at $30/hr)
$ 30.00
Cost to lubricate bearing through 1 year
55¢/oz x 1 oz per week (i.e. Lubriplate® LFG) $ 0.55
Labor (50¢ per min) x 1 min
+ 0.50
x 104 (2 times per week)
x 104
$ 109.20
Cost to replace original bearing & housing
Cost of bearing & housing
$ 114.17
Labor (1 hour at $30/hr)
$ 30.00
x 1 (replace bearing every 6 months) x 1
$ 144.17
You can ultilize the
NAIUCO-C longer if you
rotate 180º after wear is
too much in one direction.
$2,120 SAVINGS
Poly-Round® bearings are ideal for tough applications where ball bearings don’t perform as reliably as desired, such as:
� Sanitary – HACCP � High or low temperature � Wash-down or steam � Exposure to processing liquids,
chemicals
� Incomplete rotation or oscillating motion � Submerged in liquids � Locations difficult to regularly maintain � Exposed to bulk solid contaminants
Applications where plane bearings are not recommended: � High tension applications (V-belt drives,
flat belt conveyors, urethane belts) � High speed devices (fans, pumps, table
top conveyors)
� Overhung loads (unsupported shaft mounted gear reducers)
� Trunnion applications
Applications where plane bearings are not suitable require ball bearings (see EDT catalog section K).
When the bearing is worn too far in one direction for proper operation... the insert can be flipped 180º
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-3
Plane bearing capacity is measured by PV and will determine the amount of heat generated in the bearing. PV is the relationship of the load to the shaft speed in a bearing. Factors influencing PV limits (heat generation) include: � Material selection � Journal surface finish � Bearing wall thickness � Running clearance � Proximity to moisture � Ambient temperature � Cycle time
HOW TO CALCULATE PV
PV - P x VP - pressure in PSI (lbs/sq in)V - velocity in SFM (surface ft/min)P - F/A where F = force (load) on bearing A = shaft dia (in) x LTB (LTB = bearing length through the bore)V - .262 x D x RPM where D = shaft diameter (in) RPM = shaft revolutions/min
DARK BLUE 0112
Material Section Chart
Poly-Round® Bearing Materials PV Limit*
Maximum Speed
V (SFM)
Maximum Loading P (PSI)
Continuous Operating
Temp.
Performance in Moisture∆ T
Dimensional Stability with Temp Change
Chemical Resistance
Abrasion Resistance
Impact Resistance
USDA/FDA Contact ApprovalWashdown Submerged
Bear
ings
PA UHMWwhite 1,000 50 800 150°F Excellent Excellent Poor Excellent
Abrasion
applications
are very non-
predictable.
Each application
must be tested
for abrasion
resistance.
Excellent Direct
AAwhite 2,000 200 1,000 160°F Excellent Good Fair Fair Fair Direct
NAgray 6,000 350 2,000 200°F Excellent Good Fair Good Excellent Incidental
FAwhite 6,000 350 1,000 500°F Excellent Excellent Poor Excellent Excellent Direct
QFblack 60,000 400 6,000 450°F Excellent Excellent Excellent Excellent Fair Incidental
MZblack 6000 300 4,000 650°F Excellent Excellent Excellent Excellent Fair Incidental
MYblack 5000 250 3,000 800°F Excellent Excellent Excellent Excellent Fair Incidental
* PV limits are shown for unlubricated radial bearing applications. Low temperature / submerged installation may permit PV limits up to 2x higher.
NAgray
MY, MZ, QFblack
PA UHMWwhite
AA, FAwhite
Poly-Round®
Fig 3
All-Round®
Fig 4
Arrows indicate wall thickness of polymer in EDT insert bearings
What are plane bearings?Plane bearings operate without rolling elements. The term ‘plane’ comes from geometry; it establishes the plane of operation of the centerline relative to the load.
Plane bearings can be made from a variety of materials (metals, woods, polymers, other materials). Bearing-grade polymers incorporate lubricity into the material to operate without needing any grease. Plane bearings without external grease are considered Class 3 plane bearings. EDT specializes in Class 3 polymer plane bearings.
EDT offers a complete line of polymer plane bearings that interchange with UC-style (setscrew) or SA-style (eccentric) insert ball bearings.
EDT Poly-Round® (Fig 3) solid polymer inserts and All-Round® (Fig 4) polymer-and-stainless inserts are available in a variety of polymer materials, each having different ranges of capabilities (see Material Selection Chart above).
Check with EDT regarding the most appropriate style of bearing and bearing material for the specific applications you have. Poly-Round® bearings are an excellent choice on most applications where speed is not too fast. (All-Round® bearings are described in Section D of the EDT catalog.)
C-4 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Comparison of setscrew locking sleeves and DoubleLock® sleeves
In some sizes, DoubleLock® sleeves have slightly wider collar than standard locking sleeves to accommodate hardware that is strong enough to draw the split flange together to properly secure around the shaft. For details on specific shaft sizes, refer to chart on page H-5.
Extra Advantages of DoubleLock® sleeves over setscrew locking sleeves � Holds better under higher thrust loads � Retains its position under temperature cycling
Recommended applications to definitely consider DoubleLock® sleeves � Vertical shaft installation � Ovens � High load angled or vertical screw conveyor � Freezers � Other high thrust load drives
Example: 1" Locking Sleeve Dimensional Change � Body length remains the same at 1.14" � ZALUC6-1 has 1-1/2" collar OD x .375 width, overall length at 1.53"
ZALUC6-1-LC has 1-3/4" collar OD x .50 width, overall length at 1.63"ZALUC6
ZALUC6-LC
ZALUC6-OS-LC
ZALUC6-04-LC
ZALUC6-OS-04-LC
Benefits of using Locking Sleeves with Plane BearingsEDT stainless steel locking sleeves protect shaft surfaces from abrasion and the normal wear caused by plane bearings. Locking sleeves provide:
� Optimal journal to increase bearing life � Contain lateral shaft movement (replaces standard locking collar) � Protection for shaft � Abrasion resistant � Repair damaged shafting
Locking sleeves must run adjacent to polymer, not against metal. On Poly-Round®, install sleeve on either side of the insert, depending on space available (see Fig 5).
About Locking Sleeves
DoubleLock® is available in all sizes/styles of locking sleeves � DoubleLock® ZALUC6-x-LC sleeve mates with standard Poly-Round®
� DoubleLock® ZAMUC6-x-LC sleeve mates with narrow Poly-Round®
� DoubleLock® ZALUC6-x-OS-LC sleeve mates with symmetrical Oven Style Poly-Round® (-HTV fixed end)
� DoubleLock® ZALUC6-x-04-LC sleeve mates with standard length Poly-Round® (-HTE expansion end)
� DoubleLock® ZALUC6-x-OS-04-LC sleeve mates with symmetrical Oven Style Poly-Round® (-HTE expansion end)
DARK BLUE 0112
Fig 5
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-5
DoubleLock® and Setscrew Locking SleeveEDT locking sleeves extend life of plane bearings of any configuration
X=Shaft Size
DoubleLock® Sleeve Setscrew Locking Sleeve
H DP/N
Group (Ring)
Wt. in
lbs.
G F K LP/N
Group (Ring)
Wt. in
lbs.
G1 F1 K1 L1
mm in. 16thsin.mm
in.mm
in.mm
in.mm
in.mm
2 eass SHCS
in.mm
in.mm
in.mm
2 ea SS set screw
121517
1/29/165/8
11/16
891011
0.7820.0
0.9123.2
ZALUA6-x-LC
A (203).18 1.38
35.10.4411.2
1.4938 1/4-28
ZALUA6-x
A (203).15 1.31
320.38
91.1328 1/4-28
12151720
1/29/165/8
11/163/4
13/16
8910111213
0.9023.2
1.0426.3
ZALUB6-x-LC
B (204).2 1.57
39.80.5012.7
1.6341 1/4-28
ZALUB6-x
B (204).15 1.44
350.38
91.2531 1/4-28
25
3/413/167/8
15/161
1213141516
1.0927.9
1.1027.9
ZALUC6-x-LC
C (205).2 1.63
41.40.5012.7
1.7544 1/4-28
ZALUC6-x
C (205).15 1.50
370.38
91.5037 1/4-28
30
11-1/161-1/81-3/161-1/4
1617181920
1.3434.3
1.2932.7
ZALUD6-x-LC
D (206).4 1.82
46.20.5012.7
2.050 1/4-28
ZALUD6-x
D (206).31 1.79
440.4812
1.7543 3/8-24
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
1.5339.1
1.4737.3
ZALUE6-x-LC
E (207).5 2.00
50.80.5012.7
2.2557 1/4-28
ZALUE6-x
E (207).55 2.0
490.5012
2.0049 3/8-24
40
1-7/161-1/21-9/161-5/8
23242526
1.7143.8
1.6040.6
ZALUF6-x-LC
F (208).6 2.13
54.10.5012.7
2.3860 1/4-28
ZALUF6-x
F (208).62 2.19
540.5614
2.2555 3/8-24
45
1-1/21-5/8
1-11/161-3/4
24262728
1.8747.5
1.6642.2
ZALUG6-x-LC
G (209).8 2.32
58.90.6315.9
2.7570 5/16-24
ZALUG6-x
G (209).86 2.25
550.5614
2.5061 3/8-24
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
2.0953.3
1.6642.2
ZALUH6-x-LC
H (210)1.1 2.32
58.90.6315.9
3.076 5/16-24
ZALUH6-x
H (210)1.0 2.25
550.5614
2.6966 3/8-24
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
2.3459.7
1.8547.0
ZALUI6-x-LC
I (211)1.3 2.50
63.60.6315.9
3.2583 5/16-24
ZALUI6-x
I (211)1.3 2.44
600.5614
2.8871 3/8-24
60
2-3/162-1/42-5/162-3/82-7/16
3132333435
2.5364.5
1.4436.5
ZALUJ6-x-LC
J (212)1.4 2.75
69.90.6315.9
3.486 5/16-24
ZALUJ6-x
J (212)1.3 2.68
660.5614
3.2580 3/8-24
70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
2.8472.4
2.1053.3
ZALUK6-x-LC
K (214)2.2 2.88
73.20.7519.1
3.896 3/8-24
ZALUK6-x
K (214)3.0 2.88
710.7518
4.0098 1/2-20
75
2-11/162-3/4
2-13/162-/8
2-15/16
434445464748
3.1479.8
2.1053.3
ZALUL6-x-LC
L (215)2.3 2.88
73.20.7519.1
4.13105 3/8-24
ZALUL6-x
L (215)2.2 2.88
710.7518
4.0098 1/2-20
80
2-3/42-15/16
33-1/8
3-13/16
4447485051
3.2883.5
2.3559.7
ZALUM6-x-LC
M (216)3.2 3.13
79.50.7518
4.7120 3/8-24
ZALUM6-x
M (216)3.0 3.16
770.7518
4.50110 1/2-20
DoubleLock® Sleeve Setscrew Locking Sleeve
DARK BLUE 0112
ZALU_6-04-x-04(LC) sleeve is 0.6" longer ‘G’ and ‘G1’ dimension
C-6 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Poly-Round® and Poly-Sphere® BearingsDimensionally interchanges with wide inner ring insert standard Poly-Round® bearings
Poly-Round® p/n Poly-Sphere® p/n
Group Ring OD in OD mm
x = Shaft Diameter OD B C D E2 Wt
mm in 16ths inmm
inmm
inmm
inmm
inmm lbs
_ _IUAO-x _ _OUAO-x
A 2031.575 40
121517
1/29/165/8
11/16A*
891011
1.57540
0.6015.2
0.348.7
0.9123.2
0.4611.6 .1
_ _IUBO-x _ _OUBO-x
B 2041.850 47
12151720
1/29/165/8
11/163/4
13/16B*
8910111213
1.85047
0.6015.2
0.4411.2
1.0426.3
0.5213.2 .1
_ _IUCO-x _ _OUCO-x
C 2052.047 52
25
3/413/167/8
15/161C*
1213141516
2.04752
0.6616.8
0.4711.9
1.1027.9
0.5513.9 .1
_ _IUDO-x _ _OUDO-x
D 2062.441 62 30
11-1/161-1/81-3/161-1/4D*
1617181920
2.44162
0.8020.2
0.5213.2
1.2932.7
0.6416.3 .2
_ _IUEO-x _ _OUEO-x
E 2072.835 72 35
1-3/161-1/41-5/161-3/81-7/16
E*
1920212223
2.83572
0.9724.6
0.5313.5
1.4737.3
0.7418.1 .3
_ _IUFO-x _ _OUFO-x
F 2083.150 80
40
1-7/161-1/21-9/161-5/8
F*
23242526
3.15080
1.0125.6
0.5915.0
1.6040.6
0.8020.3 .4
_ _IUGO-x _ _OUGO-x
G 2093.346 85
45
1-1/21-5/8
1-11/161-3/4G*
24262728
3.34685
1.0727.2
0.5915.0
1.6642.2
0.8021.9 .5
_ _IUHO-x _ _OUHO-x
H 2103.543 90 50
1-11/161-3/4
1-13/161-7/8
1-15/162
H*
272829303132
3.54390
1.0727.2
0.6015.2
1.6642.2
0.8321.1 .5
_ _IUIO-x _ _OUIO-x
I 2113.937 100 55
1-15/162
2-1/162-1/82-3/162-1/4
I*
313233343536
3.937100
1.2231.1
0.6215.8
1.8547.0
0.9323.6 .6
_ _IUJO-x _ _OUJO-x
J 2124.331 110 60
2-3/162-1/42-5/162-3/82-7/16
J*
3536373839
4.331110
1.4436.5
0.6616.8
1.4436.5
1.0526.7 .7
_ _IUKO-x _ _OUKO-x
K 2144.921 125 70
2-7/162-1/22-5/8
2-11/162-3/4K*
3840424344
4.921125
1.3534.3
0.7519.0
2.1053.3
1.0526.7 1.0
_ _IULO-x _ _OULO-x
L 2155.118 130 75
2-11/162-3/4
2-13/162-7/8
2-15/163L*
434445464748
5.118130
1.2932.7
.8120.5
2.1053.3
1.0526.7 1.1
_ _IUMO-x _ _OUMO-x
M 2165.511 140
80
2-15/163
3-1/83-3/16
M*
47485051
5.511140
1.5138.4
.8421.3
2.3559.7
1.1829.9 1.2Split Poly-Sphere®
( _ _ OUCT-x )
Poly-Round®
( _ _ IUCO-x )
Split Poly-Round®
( _ _ IUCT-x )
* Alphabetical shaft diameter is sized for use with locking sleeve
Poly-Sphere®
( _ _ OUCO-x )
DARK BLUE 0112
_ _ = Material Identifier (see selection chart on page H-3)
NOTE: Poly-Sphere® and Split Poly-Sphere® fit into special housings
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-7
Poly-Round® and Poly-Sphere® Bearings With DoubleLock® SleeveUse standard inserts with standard locking sleeve to maximize bearing life
DARK BLUE 0112
Poly-Sphere®
Sample p/n NAOUCT-1-LC (split insert)Sample p/n NAOUCO-1-LC (1 piece insert)
NOTE: Requires special housing.
DoubleLock® p/n Setscrew p/n
Group Ring OD in OD mm
x = Shaft Diameter OD A B C D E E2 F G G1 J
Replacement Polymer Bearing
Replacement DoubleLock®
Sleeve
Wt
mm in 16ths inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
with LC sleeve
with setscrew sleeve
inmm lbs
_ _IUA7-x-LC _ _IUA7-x
A 2031.575 40
121517
1/29/165/8
11/16
891011
1.57540.0
1.0426.4
0.6015.2
0.348.7
0.9123.2
0.7519.1
0.4611.6
0.4411.2
1.3835.1
1.23(-.15)
0.9624.3
_ _IUAO-A
ZALUA6-x-LC.2
_ _IUB7-x-LC _ _IUB7-x
B 2041.850 47
12151720
1/29/165/8
11/163/4
13/16
8910111213
1.85047.0
1.1027.9
0.6015.2
0.4411.2
1.0426.3
0.9423.8
0.5213.2
0.5012.7
1.5739.8
1.42(-.15)
1.0225.9
_ _IUBO-B
ZALUB6-x-LC.3
_ _IUC7-x-LC _ _IUC7-x
C 2052.047 52 25
3/413/167/8
15/161
1213141516
2.04752.0
1.1629.5
0.6616.8
0.4711.9
1.1027.9
0.9423.8
0.5513.9
0.5012.7
1.6341.4
1.48(-.15)
1.0526.7
_ _IUCO-C
ZALUC6-x-LC.4
_ _IUD7-x-LC _ _IUD7-x
D 2062.441 62 30
11-1/161-1/81-3/161-1/4
1617181920
2.44162.0
1.3032.9
0.8020.2
0.5213.2
1.2932.7
0.9925.1
0.6416.3
0.5012.7
1.8246.2
1.77(-.05)
1.1429.0
_ _IUDO-D
ZALUD6-x-LC.6
_ _IUE7-x-LC _ _IUE7-x
E 2072.835 72 35
1-3/161-1/41-5/161-3/81-7/16
1920212223
2.83572.0
1.4737.3
0.9724.6
0.5313.5
1.4737.3
1.0025.4
0.7418.1
0.5012.7
2.0050.8
1.97(-.03)
1.2632.0
_ _IUEO-E
ZALUE6-x-LC.8
_ _IUF7-x-LC _ _IUF7-x
F 2083.150 80 40
1-7/161-1/21-9/161-5/8
23242526
3.15080.0
1.5138.3
1.0125.6
0.5915.0
1.6040.6
1.0927.8
0.8020.3
0.5012.7
2.1354.1
2.16(+.03)
1.3033.0
_ _IUFO-F
ZALUF6-x-LC1.0
_ _IUG7-x-LC _ _IUG7-x
G 2093.346 85 45
1-1/21-5/8
1-11/161-3/4
24262728
3.34685.0
1.6943.0
1.0727.2
0.5915.0
1.6642.2
1.2231.0
0.8021.9
0.6315.9
2.3258.9
2.23(-.09)
1.4637.0
_ _IUGO-G
ZALUG6-x-LC1.2
_ _IUH7-x-LC _ _IUH7-x
H 2103.543 90
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
3.54390.0
1.6943.0
1.0727.2
0.6015.2
1.6642.2
1.2231.0
0.8321.1
0.6315.9
2.3258.9
2.23(-.09)
1.4837.6
_ _IUHO-H
ZALUH6-x-LC1.3
_ _IUI7-x-LC _ _IUI7-x
I 2113.937 100
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
3.937100.0
1.8547.0
1.2231.1
0.6215.8
1.8547.0
1.2531.8
0.9323.6
0.6315.9
2.5063.6
2.41(-.09)
1.5840.1
_ _IUIO-I
ZALUI6-x-LC1.8
_ _IUJ7-x-LC _ _IUJ7-x
J 2124.331 110 60
2-3/162-1/42-5/162-3/82-7/16
3536373839
4.331110.0
2.0652.4
1.4436.5
0.6616.8
1.4436.5
1.2832.5
1.0526.7
0.6315.9
2.7569.9
2.66(-.09)
1.7043.2
_ _IUJO-J
ZALUJ6-x-LC2.0
_ _IUK7-x-LC _ _IUK7-x
K 2144.921 125 70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
4.921125.0
2.1053.3
1.3534.3
0.7519.0
2.1053.3
1.5038.1
1.0526.7
0.7519.1
2.8873.2
2.85(-.03)
1.8346.5
_ _IUKO-K
ZALUK6-x-LC4.0
_ _IUL7-x-LC _ _IUL7-x
L 2155.118 130
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
5.118130.0
2.0451.8
1.2932.7
.8120.5
2.1053.3
1.5639.7
1.0526.7
0.7519.1
2.8873.2
2.85(-.03)
1.8346.5
_ _IULO-L
ZALUL6-x-LC3.4
_ _IUM7-x-LC _ _IUM7-xM 2165.511 140 80
2-15/163
3-1/83-3/16
47485051
5.511140.0
2.2657.4
1.5138.4
.8421.3
2.3559.7
1.5940.4
1.1829.9
0.7519.1
3.1379.5
3.13(0)
1.9349.0
_ _IUMO-M
ZALUM6-x-LC4.2
LC indicates DoubleLock® sleeve. No suffix after shaft size indicates setscrew sleeve.
Poly-Round®
Sample p/n NAIUC7-1-LCView A (standard) View B
_ _ = Material Identifier (see selection chart on page H-3)
View A (standard) View B
Profile of a Poly-Round® bearing in a housing
C-8 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Narrow Poly-Round® BearingsDimensionally interchanges with narrow inner ring (light duty) insert bearings
DARK BLUE 0112
_ _ = Material Identifier (see selection chart on page H-3)
PART #
Group Ring OD in OD mm
x = Shaft Diameter B3 C D3 Wt
mm in 16ths inmm
inmm
inmm lbs
_ _IUA3-x
A 2031.575 40
121517
1/29/165/8
11/16A*
891011
0.389.6
0.348.7
0.6917.5 .1
_ _IUB3-x
B 2041.850 47
12151720
1/29/165/8
11/163/4
13/16B*
8910111213
0.389.6
0.4411.2
0.8120.7 .1
_ _IUC3-x
C 2052.047 52 25
3/413/167/8
15/161C*
1213141516
0.5012.8
0.4711.9
0.9423.9 .1
_ _IUD3-x
D 2062.441 62
30
11-1/161-1/81-3/161-1/4D*
1617181920
0.5213.3
0.5213.2
1.0125.7 .2
_ _IUE3-x
E 2072.835 72
35
1-3/161-1/41-5/161-3/81-7/16
E*
1920212223
0.6616.7
0.5313.5
1.1629.4 .3
_ _IUF3-x
F 2083.150 80 40
1-7/161-1/21-9/161-5/8
F*
23242526
0.7519.1
0.5915.0
1.3534.2 .4
_ _IUG3-x
G 2093.346 85 45
1-1/21-5/8
1-11/161-3/4G*
24262728
0.7318.6
0.5915.0
1.3333.7 .5
_ _IUH3-x
H 2103.543 90
50
1-11/161-3/4
1-13/161-7/8
1-15/162
H*
272829303132
0.8321.0
0.6015.2
1.4236.1 .5
_ _IUI3-x
I 2113.937 100
55
1-15/162
2-1/162-1/82-3/162-1/4
I*
313233343536
0.9624.3
0.6215.8
1.5840.1 .6
_ _IUJ3-x
J 2124.331 110
60
2-3/162-1/42-5/162-3/82-7/16
J*
3536373839
1.3032.9
0.6616.8
1.3032.9 .7
_ _IUK3-x
K 2144.921 125
70
2-7/162-1/22-5/8
2-11/162-3/4K*
3840424344
1.2030.5
0.7519.0
1.9549.5 1.0
PA IU_3-x
NA IU_3-x
QF IU_3-x
FA IU_3-x
* Alphabetical shaft diameter is sized for use with locking sleeve
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-9
Narrow Poly-Round® Bearings with DoubleLock® SleeveUse narrow inserts with ‘ER length’ (short) locking sleeves
where there is not sufficient length for standard length Poly-Round® bearings
PART #
Group Ring OD in OD mm
x = Shaft Diameter B3 C D3 E F G3 K
Replacement Polymer Bearing
Replacement DoubleLock® Sleeve
Wt
mm in 16ths inmm
inmm
inmm
inmm
inmm
inmm
inmm lbs
_ _IUA4-x-LC
A 2031.575 40
121517
1/29/165/8
11/16
891011
0.389.6
0.348.7
0.6917.5
0.7519.1
0.4411.2
1.1629.4
1.4938
_ _IUA3-A
ZAMUA6-x-LC.2
_ _IUB4-x-LC
B 2041.850 47
12151720
1/29/165/8
11/163/4
13/16
8910111213
0.389.6
0.4411.2
0.8120.7
0.9423.8
0.5012.7
1.3534.2
1.6341
_ _IUB3-B
ZAMUB6-x-LC.3
_ _IUC4-x-LC
C 2052.047 52 25
3/413/167/8
15/161
1213141516
0.5012.8
0.4711.9
0.9423.9
0.9423.8
0.5012.7
1.4737.3
1.7544
_ _IUC3-C
ZAMUC6-x-LC.4
_ _IUD4-x-LC
D 2062.441 62 30
11-1/161-1/81-3/161-1/4
1617181920
0.5213.3
0.5213.2
1.0125.7
0.9925.1
0.5012.7
1.5439.2
2.050
_ _IUD3-D
ZAMUD6-x-LC.6
_ _IUE4-x-LC
E 2072.835 72 35
1-3/161-1/41-5/161-3/81-7/16
1920212223
0.6616.7
0.5313.5
1.1629.4
1.0025.4
0.5012.7
1.6942.8
2.2557
_ _IUE3-E
ZAMUE6-x-LC.8
_ _IUF4-x-LC
F 2083.150 80 40
1-7/161-1/21-9/161-5/8
23242526
0.7519.1
0.5915.0
1.3534.2
1.0927.8
0.5012.7
1.8747.6
2.3860
_ _IUF3-F
ZAMUF6-x-LC1.0
_ _IUG4-x-LC
G 2093.346 85 45
1-1/21-5/8
1-11/161-3/4
24262728
0.7318.6
0.5915.0
1.3333.7
1.2231.0
0.6315.9
1.9850.3
2.7570
_ _IUG3-G
ZAMUG6-x-LC1.2
_ _IUH4-x-LC
H 2103.543 90
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
0.8321.0
0.6015.2
1.4236.1
1.2231.0
0.6315.9
2.0752.7
3.076
_ _IUH3-H
ZAMUH6-x-LC1.3
_ _IUI4-x-LC
I 2113.937 100
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
0.9624.3
0.6215.8
1.5840.1
1.2531.8
0.6315.9
2.2456.8
3.2583
_ _IUI3-I
ZAMUI6-x-LC1.8
_ _IUJ4-x-LC
J 2124.331 110 60
2-3/162-1/42-5/162-3/82-7/16
3536373839
1.3032.9
0.6616.8
1.3032.9
1.2832.5
0.6315.9
2.6166.2
3.486
_ _IUJ3-J
ZAMUJ6-x-LC2.0
_ _IUK4-x-LC
K 2144.921 125 70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
1.2030.5
0.7519.0
1.9549.5
1.5038.1
0.7519.1
2.7369.3
3.896
_ _IUK3-K
ZAMUK6-x-LC4.0
_ _ = Material Identifier (see selection chart on page H-3)LC indicates DoubleLock® sleeve. No suffix after shaft size indicates setscrew sleeve.
NA IU_4-x-LC
PA IU_4-x-LC
QF IU_4-x-LC
FA IU_4-x-LC
DARK BLUE 0112
Profile of a narrow Poly-Round® in a housing
C-10 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp DARK BLUE 0513
Look at the savings that can be realized by changing from ball bearings to EDT Poly-Round® bearings
EDT Corp 1006-J NE 146th Street, Vancouver, WA 98685 USA PHONE 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected]
COMPARE THE COsTs Of OwnERsHiP Of
EDT nA Poly-Round® solution® BearingsOn sTRAigHT Run MODulAR PlAsTiC OR wiRE BElT COnvEyORs
EDT bearings save money, time, and labor!
0414
The above illustration is based on average plant conditions.Individual results can vary based on installation and maintenance practices, and environmental conditions.
Cost of EDT nA Poly-Round® solution®
(Poly-Round® polymer insert in polymer housing)Cost of original bearing
(Non-corrosive ball bearing in polymer housing)
Based on re-using housing and sleeve,
and replacing only the insert every 12 months
Based on replacing bearing and housing
every 6 months
1st year 1st yearCost to purchase EDT bearing & housingnA2gC7-16-lK
Cost to initially install bearingLabor (1 hour at $30/hr)Cost of bearing and installation
1 year cost to buy/install bearings
Cost of lubricant:EDT Poly-Round® bearing is greaseless
Total 1 year bearing costx number of bearings per machineOne year cost of bearings per machine
$167.00
$30.00$197.00
$197.00
$0.00
$197.004
$788.00
Cost to purchase original bearing & housingF2BSCEZ100
Cost to initially install bearingLabor (1 hour at $30/hr)Cost of bearing and installation
Bearing change-outs per year52 weeks divided by 6 months1 year cost to buy/install bearings
Cost of lubricant: Lubriplate® LFG1 oz per week at 55¢/ozLabor: 50¢ per min x 1 minPM frequency: 2 times per week
Total 1 year bearing costx number of bearings per machineOne year cost of bearings per machine
$114.17
$30.00$144.17
x 2$288.34
$0.550.50
x 104 $109.20
$397.544
$1,590.16
1YEAR
E D T
GU
AR A N
TEE
Poly-Round® bearing guaranteed to run12 months with zero maintenance
Machine’s 1 year cost with original bearingsversus 1 year cost with EDT bearings
savings per machine$1,590.16
$788.00$802.16 x 6 modular belt conveyors per facility $4,812.96
2nd year2nd year
Machine’s 2 year cost with original bearingsversus 2 year cost with EDT bearings
savings per machine
$3,180.32$1,060.00
$2,120.32 x 6 modular belt conveyors per facility $12,721.92
Continue same costs as 1st year
Total 2nd year bearing costx number of bearings per machine2nd year machine cost with original bearings
Total 2-year cost of bearings on 1 machine
Replace Poly-Round® insert
Poly-Round® nAiuCO-C
Labor: $30/hour x 1 hourx number of bearings per machine2nd year machine cost with EDT bearings
Total 2-year cost of bearings on 1 machine
Plus significantly reduced maintenance scheduling and less downtime!
$38.00
$30.00x 4$272.00
$1,060.00
$397.54x 4
$1,590.16
$3,180.32
You can ultilize the
nAiuCO-C longer if you
rotate 180º after wear is
too much in one direction.
Savings over 2 years using EDT bearings!
One year savings with EDT bearings!
0513
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-11
POLY-ROUND® BEARINGSOPERATING BELOW FREEZING
Self aligning polymer plane bearings eliminate problems of grease operating in low temperatures
Poly-Round® bearings have NO moving parts, therefore they require NO GREASE
EDT Poly-Round® bearings are ideal for low temperature operations like
� Spiral freezers � Freezer input conveyors � Ice makers, ice rakes � Any equipment that has movement at temperatures below
freezing (32ºF/0ºC) where standard lubricants do not operate well because of the low temperature
3 Bearing options: Which to choose?
� For 32ºF to -40ºF use ‘NA’ freezer bearing NAIU_7-xB-LC � For -40ºF to cryogenic use either
a. Cut style ‘PA’ Poly-Round® PAIU_7-xBC-LC Most reliable performance when application is within PV paramaters
b. ‘QF’ freezer bearing QFIU_7-xB-LC When PV design limit of the equipment is beyond ‘PA’
Low temperature housing selection: KG polymer acceptable to -40ºF (Section D); lower temperature requires stainless (Section F).
Low temperature installation may permit PV limits up to 2x higher than charted limits (page C-3).
FREEZER BEARINGS
DARK BLUE 0112
QFIU_O-xB NAIU_O-xB
PAIU_O-xBC
C-12 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp DARK BLUE 0112
Poly-Round® Freezer BearingsFreezer Poly-Round® bearings are specially bored for low temp environments.
Mate with standard DoubleLock® sleeves to maximize bearing life.
Low temp PA split
Low temp NA, QF
DoubleLock® Sleeve part #
x = Shaft Diameter
Ring Size
Industry EDT
OD in inches OD in mm
K H D F G L
mm in 16thsin
mmin
mmin
mmin
mmin
mm2 eaSHCS
PAIUAO-ABC NAIUAO-ABQFIUAO-AB ZALUA6-x-LC 12
1517
1/29/165/8
11/16
891011
203A
1.57540
1.4938
0.7820.0
59/6423.3
0.4411.2
1.3835.1 1/4-28
PAIUBO-BBC NAIUBO-BBQFIUBO-BB ZALUB6-x-LC 12
151720
1/29/165/8
11/163/4
13/16
8910111213
204B
1.85047
1.6341
0.9023.2
1-3/6426.5
0.5012.7
1.5739.8 1/4-28
PAIUCO-CBC NAIUCO-CBQFIUCO-CB ZALUC6-x-LC
25
3/413/167/8
15/161
1213141516
205C
2.04752
1.7544
1.0927.9
1-7/6428.1
0.5012.7
1.6341.4 1/4-28
PAIUDO-DBC NAIUDO-DBQFIUDO-DB ZALUD6-x-LC
30
11-1/161-1/81-3/161-1/4
1617181920
206D
2.44162
2.050
1.3434.3
1-19/6432.8
0.5012.7
1.8246.2 1/4-28
PAIUEO-EBC NAIUEO-EBQFIUEO-EB ZALUE6-x-LC
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
207E
2.83572
2.2557
1.5339.1
1-31/6437.6
0.5012.7
2.0050.8 1/4-28
PAIUFO-FBC NAIUFO-FBQFIUFO-FB ZALUF6-x-LC
40
1-7/161-1/21-9/161-5/8
23242526
208F
3.15080
2.3860
1.7143.8
1-39/6440.8
0.5012.7
2.1354.1 1/4-28
PAIUGO-GBC NAIUGO-GBQFIUGO-GB ZALUG6-x-LC
45
1-1/21-5/8
1-11/161-3/4
24262728
209G
3.34685
2.7570
1.8747.5
1-43/6442.4
0.6315.9
2.3258.9 5/16-24
PAIUHO-HBC NAIUHO-HBQFIUHO-HB ZALUH6-x-LC
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
210H
3.54390
3.076
2.0953.3
1-43/6442.4
0.6315.9
2.3258.9 5/16-24
PAIUIO-IBC NAIUIO-IBQFIUIO-IB ZALUI6-x-LC
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
211I
3.937100
3.2583
2.3459.7
1-55/6447.1
0.6315.9
2.5063.6 5/16-24
PAIUJO-JBC NAIUJO-JBQFIUJO-JB ZALUJ6-x-LC
60
2-3/162-1/42-5/162-3/82-7/16
3536373839
212J
4.331110
3.486
2.5364.5
2-3/3253.3
0.6315.9
2.7569.9 5/16-24
PAIUAK-KBC NAIUKO-KBQFIUKO-KB ZALUK6-x-LC
70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
214K
4.921125
3.896
2.8472.4
2-7/6453.5
0.7519.1
2.8873.2 3/8-24
PAIULO-LBC NAIULO-LBQFIULO-LB ZALUL6-x-LC
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
215L
5.118130
4.13105
3.1479.8
2-7/6453.6
0.7519.1
2.8873.2 3/8-24
PAIUMO-MBC NAIUMO-MBQFIUMO-MB ZALUM6-x-LC
80
2-15/163
3-1/83-3/16
47485051
216M
5.511140
4.7120
3.2883.5
2-11/3259.7
0.7519.1
3.1379.5 3/8-24
DoubleLock® Sleeve
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-13
Poly-Round® Freezer Bearing with DoubleLock® SleeveThe assembly of freezer bearing and sleeve won’t rust, and stays firmly located.
DARK BLUE 0112
x = Shaft Diameter A E B C D F G Wt
Assembly Part # mm in 16ths
inmm
inmm
inmm
inmm
inmm
inmm
inmm lbs
NAIUA7-xB-LCPAIUA7-xBC-LCQFIUA7-xB-LC
121517
1/29/165/8
11/16
891011
1.0426.4
0.7519.1
0.6015.2
0.348.7
0.9123.2
0.4411.2
1.3835.1 .2
NAIUB7-xB-LCPAIUB7-xBC-LCQFIUB7-xC-LC
12151720
1/29/165/8
11/163/4
13/16
8910111213
1.1027.9
0.9423.8
0.6015.2
0.4411.2
1.0426.3
0.5012.7
1.5739.8 .3
NAIUC7-xB-LCPAIUC7-xBC-LCQFIUC7-xB-LC 25
3/413/167/8
15/161
1213141516
1.1629.5
0.9423.8
0.6616.8
0.4711.9
1.1027.9
0.5012.7
1.6341.4 .4
NAIUD7-xB-LCPAIUD7-xBC-LCQFIUD7-xB-LC 30
11-1/161-1/81-3/161-1/4
1617181920
1.3032.9
0.9925.1
0.8020.2
0.5213.2
1.2932.7
0.5012.7
1.8246.2 .6
NAIUE7-xB-LCPAIUE7-xBC-LCQFIUE7-xB-LC 35
1-3/161-1/41-5/161-3/81-7/16
1920212223
1.4737.3
1.0025.4
0.9724.6
0.5313.5
1.4737.3
0.5012.7
2.0050.8 .8
NAIUF7-xB-LCPAIUF7-xBC-LCQFIUF7-xB-LC 40
1-7/161-1/21-9/161-5/8
23242526
1.5138.3
1.0927.8
1.0125.6
0.5915.0
1.6040.6
0.5012.7
2.1354.1 1.0
NAIUG7-xB-LCPAIUG7-xBC-LCQFIUG7-xB-LC 45
1-1/21-5/8
1-11/161-3/4
24262728
1.6943.0
1.2231.0
1.0727.2
0.5915.0
1.6642.2
0.6315.9
2.3258.9 1.2
NAIUH7-xB-LCPAIUH7-xBC-LCQFIUH7-xB-LC
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
1.6943.0
1.2231.0
1.0727.2
0.6015.2
1.6642.2
0.6315.9
2.3258.9 1.3
NAIUI7-xB-LCPAIUI7-xBC-LCQFIUI7-xB-LC
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
1.8547.0
1.2531.8
1.2231.1
0.6215.8
1.8547.0
0.6315.9
2.5063.6 1.8
NAIUJ7-xB-LCPAIUJ7-xBC-LCQFIUJ7-xB-LC 60
2-3/162-1/42-5/162-3/82-7/16
3536373839
2.0652.4
1.2832.5
1.4436.5
0.6616.8
1.4436.5
0.6315.9
2.7569.9 2.0
NAIUK7-xB-LCPAIUK7-xBC-LCQFIUK7-xB-LC 70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
2.1053.3
1.5038.1
1.3534.3
0.7519.0
2.1053.3
0.7519.1
2.8873.2 4.0
NAIUL7-xB-LCPAIUL7-xBC-LCQFIUL7-xB-LC
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
2.0451.8
1.5639.7
1.2932.7
.8120.5
2.1053.3
0.7519.1
2.8873.2 3.4
NAIUM7-xB-LCPAIUM7-xBC-LCQFIUM7-xB-LC 80
2-15/163
3-1/83-3/16
47485051
2.2657.4
1.5940.4
1.5138.4
.8421.3
2.3559.7
0.7519.1
3.1379.5 4.2
View A (standard) View B Sample p/n PAIUC7-1BC-LC Sample p/n QFIUC7-1B-LC
View A (standard) View B
Profile of a Freezer Poly-Round® in a housing
C-14 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Installing Poly-Round® bearing into EDT housingNOTE: Fig 7-1: Remove two (2) setscrews from an EDT housing in order to replace the Poly-Round®
bearing.Step 1: Put new bearing into a freezer or into ice water for an hour. Poly-Round® bearings are made for
a snug fit into the housing. Chilling the polymer will shrink it and make it easier to install, but it is still possible without chilling.
Step 2: Fig 7-2: Establish orientation of the insert into the housing (the slot on the bearing O.D. should be directly under the tapped hole in the housing). Roll the chilled bearing into the housing. If necessary, use a bar in the bearing bore to assist; the diameter of the bar should be as close to the bearing bore as possible (a wood or plastic bar is preferable because it will reduce possible damage).
Step 3: Fig 7-3: Install two setscrews through the housing. The 1st setscrew (the longest one) will make contact with the bottom of the slot in the bearing and then will be reversed 1 full turn. The 2nd setscrew will go on top of the 1st to lock it in place and to fill up the hole.
Fig 7-4: Current Poly-Round® bearings include two anti-rotation slots on the spherical outer diameter. One of these should be used in every installation. The second slot is used when the insert is flipped 180º after use, which doubles the life of the bearing.
The anti-rotation slot: � Allows insert to be retained within a range of motion so it can align with the shaft. � Keeps insert in place (so it doesn’t spin) while the operating temperature increases to lock the
bearing in the housing. (The bearing expands more than the housing.) Additional directions for mounting the assembly onto equipment can be found in the EDT catalog
on page O-8, or online at http://edtcorp.com/e.userhandbook/userhandbook.html, and go to page 8.
DARK BLUE 0112
Poly-Round® mounted bearings available for all styles and sizes of bearings 1/2" to 3-7/16"
Poly-Round® bearings can be installed in EDT housings or bearing housings by other manufacturers. See EDT catalog Section B (AMBER) for dimensions of mounted bearings.
When installing Poly-Round® bearings in a non-EDT housingFor anti-rotation device: DO NOT use the existing tapped hole of grease fitting. Instead, the following will apply:
1. Drill and tap a 1/4-28 hole on the centerline of the spherical ID.
2. Insert the Poly-Round® into the housing (freeze bearing for easier assembly).
3. Align one of the anti-rotation slots of the bearing with the tapped hole of the housing.
4. Thread setscrew through the housing and into the Poly-Round® anti-rotation slot (setscrew provided with Poly-Round®).
5. Setscrew should be screwed down until it just touches the bottom of the slot.
6. Then, reverse the setscrew (back it out) one FULL turn (360º).
7. EDT plugs any other holes in the housing with a very short setscrew so the hole is not a contamination trap, or gives an impression that “something is missing.”
8. The setscrews in the housing should NOT be adjusted after this time. Do NOT adjust the housing setscrew when housing is mounted on the equipment.
Fig 7-2
Fig 7-1
Fig 7-3
Poly-Round® has two anti-rotation slots at 180º
Fig 7-4See: EDT Poly-Round® Installation video: http://www.youtube.com/watch?v=N8mXjrZbwYA
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-15
EDT no-grease Poly-Round®* bearings operate reliably in high temperatures with ZERO maintenance
� ‘Fixed’ and ‘floating’ (expansion) options available – Expansion is accommodated with longer DoubleLock® sleeve – ‘Fixed’ bearing set includes DoubleLock® sleeve and a split collar (stainless steel)
� QF polymer bearing material is rated to 450°F – FA polymer bearing material offers high-temp with FDA-approval for direct and
continuous food or pharmaceutical contact – Other materials available for intermittent temperatures between 450° and 950°F**
� Poly-Round® insert for high temp is dimensioned to allow for part and equipment expansion at elevated temperature – High-temperature Poly-Round® is denoted with suffix ‘-HT’
� On new equipment: consider EDT’s OS (oven style) high temp bearings that offer higher PV capability and easiest installation – Fixed and floating OS Poly-Round® bearings available
(insert part number suffix ‘-OS’)
POLY-ROUND® BEARINGSOPERATING IN HIGH HEAT
Oven Bearings
DARK BLUE 0112
Machined stainless housing oven bearing:
fixed end
Cast steel housing oven bearing: expansion end
Cast stainless housing oven bearing
* All of this information also applies to EDT Poly-Sphere® bearings. Poly-Sphere® bearings require special housing. ** MZ and MY plane bearings that operate above 500°F do so at lower speed and load limits than QF.
EDT exclusive design accommodates shaft expansion
HTE - Expansion end HTV - Fixed end
C-16 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Poly-Round® Oven Bearings: Fixed EndOven Poly-Round® bearings are specially dimensioned for high temp environments.
Fixed-end units securely locate shaft within the bearing.
x = Shaft Diameter
Ring Size
Industry EDT
OD in OD mm
Fixed End Components
Bearing Assembly
S N F D M
mm in 16ths Poly-Round® Insert
DoubleLock® sleeve
Fixed End
Split collarV = single split
W = double split
inmm
inmm
inmm
inmm
inmm
121517
1/29/165/8
11/16
891011
203A
1.57540
QFIUAO-A-HT ZALUA6-x-LC ZATVAO-x QFIUA7-x-LCHTV .4511.4
.7920.0
0.4411.2
0.9123.2
1.2331.2
12151720
1/29/165/8
11/163/4
13/16
8910111213
204B
1.85047
QFIUBO-B-HT ZALUB6-x-LC ZATVBO-x QFIUB7-x-LCHTV .512.7
.9423.9
0.5012.7
1.0426.3
1.4436.6
25
3/413/167/8
15/161
1213141516
205C
2.04752
QFIUCO-C-HT ZALUC6-x-LC ZATVCO-x QFIUC7-x-LCHTV .512.7
.9724.6
0.5012.7
1.1027.9
1.4737.3
30
11-1/161-1/81-3/161-1/4
1617181920
206D
2.44162
QFIUDO-D-HT ZALUD6-x-LC ZATVDO-x QFIUD7-x-LCHTV .512.7
1.0225.9
0.5012.7
1.2932.7
1.5238.6
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
207E
2.83572
QFIUEO-E-HT ZALUE6-x-LC ZATVEO-x QFIUE7-x-LCHTV .512.7
1.0326.1
0.5012.7
1.4737.3
1.5338.8
40
1-7/161-1/21-9/161-5/8
23242526
208F
3.15080
QFIUFO-F-HT ZALUF6-x-LC ZATVFO-x QFIUF7-x-LCHTV .512.7
1.0927.6
0.5012.7
1.6040.6
1.5940.4
45
1-1/21-5/8
1-11/161-3/4
24262728
209G
3.34685
QFIUGO-G-HT ZALUG6-x-LC ZATVGO-x QFIUG7-x-LCHTV .512.7
1.0927.6
0.6315.9
1.6642.2
1.7243.7
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
210H
3.54390
QFIUHO-H-HT ZALUH6-x-LC ZATVHO-x QFIUH7-x-LCHTV .6717.1
1.2732.2
0.6315.9
1.6642.2
1.948.2
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
211I
3.937100
QFIUIO-I-HT ZALUI6-x-LC ZATVIO-x QFIUI7-x-LCHTV .7519.1
1.3734.8
0.6315.9
1.8547.0
2.050.8
60
2-3/162-1/42-5/162-3/82-7/16
3536373839
212J
4.331110
QFIUJO-J-HT ZALUJ6-x-LC ZATVJO-x QFIUJ7-x-LCHTV .7519.1
1.4135.8
0.6315.9
1.4436.5
2.0451.8
70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
214K
4.921125
QFIUKO-K-HT ZALUK6-x-LC ZATVKO-x QFIUK7-x-LCHTV .820.3
1.5539.4
0.7519.1
2.1053.3
2.358.4
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
215L
5.118130
QFIULO-L-HT ZALUL6-x-LC ZATVLO-x QFIUL7-x-LCHTV .8822.3
1.6942.9
0.7519.1
2.1053.3
2.4462.0
80
2-15/163
3-1/83-3/16
47485051
216M
5.511140
QFIUMO-M-HT ZALUM6-x-LC ZAT_MO-x QFIUM7-x-LCHTV .8822.3
1.7243.7
0.7519.1
2.3559.7
2.4762.7
DARK BLUE 0112
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] C-17
Poly-Round® Oven Bearings: Expansion EndHigh Temperature Poly-Round® with long (-04) DoubleLock® Sleeve
accommodates expansion of equipment as temperature rises and falls.
x = Shaft Diameter
Ring Size
Industry EDT
OD in inches OD in mm
Expansion End Components
Bearing Assembly
K A B C E D2 G
mm in 16ths Poly-Round® insert
DoubleLock® sleeve (long)
inmm
inmm
inmm
inmm
inmm
inmm
inmm
121517
1/29/165/8
11/16
891011
203A
1.57540
QFIUAO-A-HT ZALUA6-x-04LC QFIUA7-x-LCHTE 1.4938
1.0426.4
0.6015.2
0.348.7
0.7519.1
1.5438
1.3835.1
12151720
1/29/165/8
11/163/4
13/16
8910111213
204B
1.85047
QFIUBO-B-HT ZALUB6-x-04LC QFIUB7-x-LCHTE 1.6341
1.1027.9
0.6015.2
0.4411.2
0.9423.8
1.644
1.5739.8
25
3/413/167/8
15/161
1213141516
205C
2.04752
QFIUCO-C-HT ZALUC6-x-04LC QFIUC7-x-LCHTE 1.7544
1.1629.5
0.6616.8
0.4711.9
0.9423.8
1.743
1.6341.4
30
11-1/161-1/81-3/161-1/4
1617181920
206D
2.44162
QFIUDO-D-HT ZALUD6-x-04LC QFIUD7-x-LCHTE 2.050
1.3032.9
0.8020.2
0.5213.2
0.9925.1
1.948
1.8246.2
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
207E
2.83572
QFIUEO-E-HT ZALUE6-x-04LC QFIUE7-x-LCHTE 2.2557
1.4737.3
0.9724.6
0.5313.5
1.0025.4
2.153
2.0050.8
40
1-7/161-1/21-9/161-5/8
23242526
208F
3.15080
QFIUFO-F-HT ZALUF6-x-04LC QFIUF7-x-LCHTE 2.3860
1.5138.3
1.0125.6
0.5915.0
1.0927.8
2.256
2.1354.1
45
1-1/21-5/8
1-11/161-3/4
24262728
209G
3.34685
QFIUGO-G-HT ZALUG6-x-04LC QFIUG7-x-LCHTE 2.7570
1.6943.0
1.0727.2
0.5915.0
1.2231.0
2.358
2.3258.9
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
210H
3.54390
QFIUHO-H-HT ZALUH6-x-04LC QFIUH7-x-LCHTE 3.076
1.6943.0
1.0727.2
0.6015.2
1.2231.0
2.358
2.3258.9
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
211I
3.937100
QFIUIO-I-HT ZALUI6-x-04LC QFIUI7-x-LCHTE 3.2583
1.8547.0
1.2231.1
0.6215.8
1.2531.8
2.563
2.5063.6
60
2-3/162-1/42-5/162-3/82-7/16
3536373839
212J
4.331110
QFIUJO-J-HT ZALUJ6-x-04LC QFIUJ7-x-LCHTE 3.486
2.0652.4
1.4436.5
0.6616.8
1.2832.5
2.769
2.7569.9
70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
214K
4.921125
QFIUKO-K-HT ZALUK6-x-04LC QFIUK7-x-LCHTE 3.896
2.1053.3
1.3534.3
0.7519.0
1.5038.1
2.769
2.8873.2
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
215L
5.118130
QFIULO-L-HT ZALUL6-x-04LC QFIUL7-x-LCHTE 4.13105
2.0451.8
1.2932.7
.8120.5
1.5639.7
2.769
2.8873.2
80
2-15/163
3-1/83-3/16
47485051
216M
5.511140
QFIUMO-M-HT ZALUM6-x-04LC QFIUM7-x-LCHTE4.7120
2.2657.4
1.5138.4
.8421.3
1.5940.4
2.460
3.1379.5
DARK BLUE 0112
View A (standard) View BD2 - D = 0.6’ length for expansion
View A (standard) View B
Profile of an Oven Poly-Round® in a housing
C-18 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Diameter
Ring Size
Industry EDT
OD in OD mm
Components
Bearing Assembly Fixed End K S F L D1 B1 A2 A1 A3 M1
Poly-Round® insert
DoubleLock® sleeve Fixed End Split collar
(Fixed end only)V = single split
W = double splitmm in 16ths DoubleLock® sleeve
Expansion EndBearing Assembly
Expansion Endin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
121517
1/29/165/8
11/16
891011
203A
1.57540
QFIUAO-A-OSZALUA6-x-OS-LC ZATVAO-x QFIUA7O-x-OSHTV
1.4938
.4511.4
0.4411.2
1.3835.1
1.082.74
.5413.9
1.7343.9
.9824.9
.9925.1
1.9750.0
ZALUA6-x-OS-04-LC N/A QFIUA7-x-OSHTE
12151720
1/29/165/8
11/163/4
13/16
8910111213
204B
1.85047
QFIUBO-B-OS
ZALUB6-x-OS-LC ZATVBO-x QFIUB7O-x-OSHTV1.6341
.512.7
0.5012.7
1.5739.8
1.203.05
.6015.1
1.8346.4
1.127.9
1.127.9
2.255.9
ZALUB6-x-OS-04-LC N/A QFIUB7-x-OSHTE
25
3/413/167/8
15/161
13141516
205C
2.04752
QFIUCO-C-OSZALUB6-x-OS-LC ZATVCO-x QFIUC7-x-OSHTV
1.7544
.512.7
0.5012.7
1.6341.4
1.3333.8
.6616.7
1.9549.5
1.1629.5
1.1629.4
2.3259.0
ZALUC6-x-OS-04-LC N/A QFIUC7-x-OSHTE
30
11-1/161-1/81-3/161-1/4
1617181920
206D
2.44162
QFIUDO-D-OS
ZALUD6-x-OS-LC ZATVDO-x QFIUD7-x-OSHTV2.0050
.512.7
0.5012.7
1.8246.2
1.6040.6
.8020.3
2.2356.6
1.333.0
1.333.0
2.666.0
ZALUD6-x-OS-04-LC N/A QFIUD7-x-OSHTE
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
207E
2.83572
QFIUEO-E-OS
ZALUE6-x-OS-LC ZATVEO-x QFIUE7-x-OSHTV2.2557
.512.7
0.5012.7
2.0050.8
1.7043.2
.8521.5
2.3359.2
1.3534.3
1.3534.3
2.768.6
ZALUE6-x-OS-04-LC N/A QFIUE7-x-OSHTE
40
1-7/161-1/21-9/161-5/8
23242526
208F
3.15080
QFIUFO-F-OSZALUF6-x-OS-LC ZATVFO-x QFIUF7-x-OSHTV
2.3860
.512.7
0.5012.7
2.1354.1
1.8045.7
.9023.0
2.4361.7
1.4035.5
1.435.5
2.871.1
ZALUF6-x-OS-04-LC N/A QFIUF7-x-OSHTE
45
1-1/21-5/8
1-11/161-3/4
24262728
209G
3.34685
QFIUGO-G-OSZALUG6-x-OS-LC ZATVGO-x QFIUG7-x-OSHTV 2.75
70.5
12.70.6315.9
2.3258.9
2.1454.4
1.025.4
2.7670.1
1.6341.4
1.538.1
3.281.3
ZALUG6-x-OS-04-LC N/A QFIUG7-x-OSHTE
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
210H
3.54390
QFIUHO-H-OS
ZALUH6-x-OS-LC ZATVHO-x QFIUH7-x-OSHTV3.0076
.6717.1
0.6315.9
2.3258.9
2.1454.4
1.025.4
2.7670.1
1.6341.4
1.6742.4
3.384.6
ZALUH6-x-OS-04-LC N/A QFIUH7-x-OSHTE
55
1-15/162
2-1/162-1/82-3/162-1/4
313233343536
211I
3.937100
QFIUIO-I-OS
ZALUI6-x-OS-LC ZATVIO-x QFIUI7-x-OSHTV3.2583
.7519.1
0.6315.9
2.5063.6
2.3459.7
1.435.3
2.9875.7
2.050.8
2.154.6
4.110.41
ZALUI6-x-OS-04-LC N/A QFIUI7-x-OSHTE
60
2-3/162-1/42-5/162-3/82-7/16
3536373839
212J
4.331110
QFIUJO-J-OSZALUJ6-x-OS-LC ZATVJO-x QFIUJ7-x-OSHTV
3.4086
.7519.1
0.6315.9
2.7569.9
2.7068.6
1.332.9
3.3384.6
1.948.3
2.154.6
3.076.2
ZALUJ6-x-OS-04-LC N/A QFIUJ7-x-OSHTE
70
2-7/162-1/22-5/8
2-11/162-3/4
3840424344
214K
4.921125
QFIUKO-K-OSZALUK6-x-OS-LC ZATVKO-x QFIUK7-x-OSHTV
3.8096
.820.3
0.7519.1
2.8873.2
2.7068.6
1.332.9
3.3384.6
2.050.8
2.154.6
4.1104.1
ZALUK6-x-OS-04-LC N/A QFIUK7-x-OSHTE
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
215L
5.118130
QFIULO-L-OS
ZALUL6-x-OS-LC ZATVLO-x QFIUL7-x-OSHTV4.13105
.8822.3
0.7519.1
2.8873.2
2.5865.5
1.332.9
3.2181.5
2.050.8
2.255.9
4.2106.7
ZALUL6-x-OS-04-LC N/A QFIUL7-x-OSHTE
80
2-15/163
3-1/83-3/16
47485051
216M
5.511140
QFIUMO-M-OSZALUM6-x-OS-LC ZATWMO-x QFIUM7-x-OSHTV
4.70120
.8822.3
0.7519.1
3.1379.5
3.0577.4
1.538.1
3.6592.7
2.255.9
2.461.0
4.6116.8
ZALUM6-x-OS-04-LC N/A QFIUM7-x-OSHTE
Poly-Round® OS Oven SeriesAdditional width eliminates chance of metal-to-metal contact between housing and collars.
OS fixed and floating have longer length-thru-bore plus thrust margin-of-safety.
Expansion end sample p/n QFIUC7-1-OSHTE
Fixed end sample p/n QFIUC7-1-OSHTV
DARK BLUE 0613
Expansion endFixed end
Profile of an OS Oven Poly-Round® in a housing