Polhampton Farm Ashe Lane Ashe near Basingstoke RG25 · PDF fileOn behalf of Geoff Elliott...

Click here to load reader

  • date post

    12-Oct-2019
  • Category

    Documents

  • view

    1
  • download

    0

Embed Size (px)

Transcript of Polhampton Farm Ashe Lane Ashe near Basingstoke RG25 · PDF fileOn behalf of Geoff Elliott...

  • On behalf of Geoff Elliott Farming Ltd

    Polhampton Farm Ashe Lane

    Ashe near Basingstoke RG25 3BS

    By kind permission of Polhampton Farm Partnership

    ON FRIDAY 27

    TH SEPTEMBER 2019

    Commencing at 10.00am

    Auction Office Salisbury Auction Centre

    Netherhampton Road Salisbury SP2 8RH Tel: 01722 321215

    www.salisburyauctioncentre.co.uk

    http://www.salisburyauctioncentre.co.uk/

  • Foreword

    Southern Counties Auctioneers are pleased to have been instructed to

    carry out a Dispersal Sale on behalf of Messrs Geoff Elliott Farming Ltd. There is a good selection of modern up to date Combines, Tractors, Farm Implements & Machinery, which have all been carefully maintained with the benefit of a well-stocked farm workshop and most of the items on offer have come straight from work. This is a genuine retirement sale and the Auctioneers recommend the lots on offer which should give prospective purchasers many more hours of service. There are also included by permission quite a few introduced lots the property of local traders and farmers which will add interest to the sale.

    Directions

    Polhampton Farm is approached via a farm road off a lane heading North from the village of Ashe and the B3400 Whitchurch to Basingstoke Road. From the A34 trunk road, take the B3400 road through Whitchurch and Overton and turn left after 1 1/4 miles from Overton, sign posted North Oakley, pass the houses and church on the left (beware road quite narrow) and the farm road will be on the left hand side after approx. ½ mile. The postcode of RG25 3BS is accurate for those using satellite navigation.

    The Auctioneers temporary direction signs will be posted on the sale morning in the usual way.

    Viewing The goods for sale may be viewed on the day before the sale between 10am & 4pm or on sale morning from 8.30 am onwards. Any technical enquires should be directed to Simon Whaley at the auctioneers on 07971 571612 or Geoff Elliott Esq 07836 553919.

    Refreshments Hot & cold refreshments available on sale day by Holdens Farm Caterers.

  • Payment This Auction is conducted on a PAY ON THE DAY BASIS and all payments should be made immediately after the sale and not later than one hour after the last lot has been offered. Purchasers unknown to the Auctioneers should either bring with them a Bankers Draft, sufficient cash to pay for their purchases or if wishing to pay by cheque a supporting letter from their Bankers. Please note debit cards may be acceptable but prospective purchasers should also bring an alternative method of payment. PLEASE NOTE WE NO LONGER ACCEPT PAYMENT BY CREDIT CARDS. NO CREDIT WILL BE ALLOWED. PURCHASERS ATTENTION IS DRAWN TO THE CONDITIONS OF SALE.

    Removal of goods

    All goods become the responsibility of the purchaser at the fall of the hammer. Please remove goods as soon as possible after payment and in any case by Friday 4th October 2019. Any goods remaining after that date may be disposed of at no cost to the Auctioneers or their clients.

    Commission bids The Auctioneers will be pleased to execute commission bids on behalf of prospective purchasers providing such commissions are given to the Auctioneers in writing prior to the start of the sale.

    Important please note The Auctioneers and their clients accept no liability for any damage or injury to persons, plant or equipment etc at this sale and all attend at their own risk. Buyers should ensure that lots comply with current health & safety standards before use.

    Warranties All lots are sold as seen without any warranty whatsoever except where specifically stated at the time of sale.

    Value added tax There is value added tax to be added at the rate of 20% to the hammer price at this sale. There is no buyer’s premium.

    Conditions of sale Your attention is drawn to the conditions of sale printed at the back of this catalogue.

  • IMPORTANT NOTICE TO ALL PROSPECTIVE PURCHASERS AT THIS AUCTION

    Purchaser identification numbers. Every prospective purchaser must call at the sales office on the sale site to register their name & address and collect their purchaser identification number This purchaser identification number must be shown to the auctioneer at the time of each purchase (instead of giving name) The auctioneer will sell only to purchaser identification numbers – not to names and there will be no exception to this rule Please collect your identification number well before the start of the auction

    Your co-operation is very much appreciated

    Catalogue Commencing at 10.00am Prompt in the New Barn besides the Sale Field.

    1-2 OLD TARPAULINS 3-7 FARMHAND TOOLS TO BE SOLD IN SUITABLE LOTS 8-9 VARIOUS ROPE 10 TRAILER SIGNS 11 WIDE VEHICLE SIGNS 12 LONG VEHICLE SIGNS 13 HEDGECUTTING SIGNS 14-15 AMBER WARNING LIGHTS

    16 PERSPEX HEDGECUTTING DOOR GUARD 17 MESH HEDGECUTTING DOOR GUARD 18-19 SET WORKSHOP/MACHINERY SERVICING STEPS 20 PLATFORM STEPS ON WHEELS 21 WORKSHOP TROLLEY 22-25 LOAD STRAPS 26-29 LIFTING CHAINS 30-31 LIFTING SLINGS

    32-33 VARIOUS CHAIN 34 RATCHET LOAD CHAINS 35-36 SCATTERBIRD GAS SCARING GUN 37 2 GAS BIRD SCARING GUNS 38 1 GAS BIRD SCARING GUN 39 STATIC BIRD SCARERS 40-49 VARIOUS WORKSHOP TOOLS 50 FUEL HOSE, PUMP AND NOZZLE 51 GREASE GUNS ETC

    52-54 OIL MEASURES AND FUNNEL 55 ELECTRIC EXTENSION LEAD, PAT TESTED 56-57 BOTTLE JACKS 58 AXLE STANDS 59 DUAL WHEEL HOOK BOLTS 60 QTY MANITOU SPARES 61 2 MANITOU RAMS 62-66 VARIOUS MACHINERY SPARES

    67 HEDGECUTTER BRACKETS TO SUIT JOHN DEERE TRACTOR 68-69 JOHN DEERE PARTS 70 JOHN DEERE COMBINE PARTS

  • 71 BUILDING SITE SAFETY SIGNS 72 PTO SPARES 73 CABLE GUARD 74 MISCELLANEOUS BEARINGS 75 COUSINS ROLLER SPACERS

    76 COUSINS ROLLER SPARES 77 AMAZONE SPREADER SPARES 78 JOHN DEERE 740A DRILL SPARES 79 ACCORD DRILL SPARES 80-83 KVERNELAND PLOUGH SPARES 84 AIR HOSE TO SUIT DRILLS 85 86 QTY JOHN DEERE BELTS

    87 HYDRAULIC TOP LINK 88-89 QTY BERTHOUD SPRAYER PARTS 90 QTY SIMBA FREEFLOW SPARES 91 QTY SHAKERATOR SPARES 92 93 3 WEAVING STUBBLE RAKE TINES 94 TINES FOR KUHN POWER HARROW 95 QTY KNIGHT TRIPLE PRESS SPARES 96 2 ARC WELDERS, SPARES OR REPAIR

    97 SPARE DISCS FOR KVERNELAND VISIO DISC HARROWS 98 QTY CLAAS SPARES 99 BELLE ELECTRIC CEMENT MIXER - PAT TESTED 100 PTO AIR PUMP AND HOSE 101 ELECTRIC RAPE KNIFE 102 PETROL DRIVEN PRESSURE WASHER WITH BRIGGS & STRATTON 10HP

    ENGINE 103 DIESEL DRIVEN STEAM CLEANER WITH HOSE AND LANCE 104 ELECTRIC CEMENT MIXER – PAT TESTED 105 STOCKS FAN JET SLUG PELLETER 106 EVANS AND PEARCE SLUG PELLETER 107 LOGIC QUAD SPRAYER WITH LANCE AND BOOM 108 109 PETROL ENGINED WATER PUMP WITH INLET AND OUTLET HOSES AND

    FIRE NOZZLE 110 GRAIN STORE VACUUM CLEANER, PAT TESTED 111 LISHMAN 3 PHASE GRAIN FANS 112 LISHMAN SINGLE PHASE GRAIN FANS, PAT TESTED 113 8 TON WORKSHOP TROLLEY JACK

    114 TORQUE WRENCH 115-117 VARIOUS OILS TO BE SOLD IN SUITABLE LOTS 118-120 VARIOUS COOLANTS TO BE SOLD IN SUITABLE LOTS 121-122 OIL DRAINAGE TRAYS 123 124 STARFIRE ITC SATELITE SYSTEM & 2600 SCREEN 125 GREENSTAR 3000 RECEIVER & 2600 SCREEN 126 SINAR FARMPRO GRAIN MOISTURE METER

    127 WYLE 55 GRAIN MOISTURE METER 128 PROTIMETER GRAIN MOISTURE METER 129 ¾” IMPACT SOCKET SET

  • 130 1” IMPACT SOCKET SET 131 ¾” AIR IMPACT WRENCH 132 BENCH GRINDER – PAT TESTED 133 PILLAR DRILL – PAT TESTED 134 9” GRINDER – PAT TESTED

    135 VOLT/AMP METER – UNUSED 136 SPACE HEATER – PAT TESTED 137 OXYACETYLENE GAS BOTTLE TROLLEY, TORCHES AND HOSES 138 OXFORD ARC WELDER 139 KEMPPI MIG WELDER 140 CLARK STARTER/CHARGER/BOOSTER SET

    Lots Introduced by permission

    The property of local farmers Lots 141-150

    141 CLAAS COMBINE SIDE KNIFE

    142 JOHN DEERE COMBINE SIDE KNIFE 143 BOX SPARES/NEW POINTS TO FIT SIMBA SOLO 144 EVANS AND PEARCE ELECTRO SLUG PELLETER/BROADCASTER 145 STOCKS TWIN AG FAN JET BROADCASTER APPROX 30 METRES WORKING WIDTH, AS NEW PURCHASED 2017

    146-147 20 ROLLS 500MM SILAGE STRETCH WRAP 148 CLAAS ELECTRIC RAPE KNIFE 149-150

    Outside in the Sale Field Immediately after the Sale in the Barn.

    151-153 IBC TANK 154-158 GALVANISED GRAIN DRYING PEDESTAL 159

    160-161 A FRAME 162 HOMEMADE DRAWBAR 163 FRONT CROP DEFLECTOR/SHIELD TO FIT FENDT TRACTOR 164-165 166 PAIR PALLET FORK EXTENSIONS 167 PALLET FORK SLEEVE WITH TOW PIN 168 PALLET FORK SLEEVE WITH TOW BALL 169 PAIR FENDT REAR WHEEL BASE WEIGHTS

    170 PAIR FENDT REAR WHEEL WEIGHTS 171 1 TON SLAB WEIGHT 172 JOHN DEERE BASE WEIGHT & JOHN DEERE WEIGHT 173-174 JOHN DEERE 900KG FRONT WEIGHT 175 JOHN DEERE 1200KG FRONT WEIGHT 176 FARMFORCE FRONT WEIGHT 177 PAIR FENDT REAR WHEEL BASE WEIGHTS 178 STRONG BOX FOR OIL CONTAINER STORAGE 179 PORTABLE BUNDED OIL STORE FOR BARRELS, CANS AND DRAINERS

    180 HOMEMADE FRONT TOOL BOX TO FIT ON JOHN DEERE FRONT WEIGHT 181 FRONT LINKAGE MOUNTED SPRAY CONTAINER WITH LIGHTS AND MIRRORS 182 FRONT LINKAGE MOUNTED 1420KG WEIGHT WITH STORAGE BOXES

    FOR TOOLS ETC MADE BY ROSEWELL ENGINEERING

  • 183 ALUMINIUM LADDER 184 ALUMINIUM WORK PLATFORM