tk Polysius

POLAB® AMTLaboratory automation system with industrial robot

Our new name is

ThyssenKrupp Industrial Solutions

www.thyssenkrupp-industrial-solutions.com

POLAB® AMTThe laboratory automation system with industrial 6-joint robot

POLAB® AMT, a laboratory automation system of modular design, is equipped with an industrial robot. It integrates the existing POLAB® standard modules for capsule reception and sample preparation into a successful modular design.

The configuration can be adapted to project-specific requirements. Furthermore, POLAB® AMT can be individually equipped with the following components, according to the laboratory requirements:

n up to 2 POLAB® ART capsule receiving modules,

n up to 3 POLAB® APMplus sample preparation modules,

n up to 2 sample stores,

n 1 input/output magazine,

n different analysers such as XRF, XRD, colorimeter, laser granulometer, etc.

An optional housing encloses the modules on an area of just 5.7 m2. Its doors are safety-monitored. Thanks to the housing, access restrictions or monitoring of the room are not necessary.

During maintenance of the robot, the individual modules can be operated manually. POLAB® APMplus sample preparation modules as well as POLAB® ART capsule receiving modules are provided with a separate PLC and a control panel. Independent operation is thus possible.

No robot is required for transferring pressed tablets to the XRF and XRD analysers.

I/O magazine Sample store POLAB® ART capsule receiving module

Industrial robot

Colorimeter

Laser granulometer

Conveyor belt for conveyance to the analysers

POLAB® APMplus sample preparation module

Space for another laboratory module or analyser

XRD

XRF

POLAB® AMT equipped with

two POLAB® APMplus

sample preparation modules.

Optimised sample handling thanks to a combination of industrial robot and conveyor belts

Special features of POLAB® AMT

❍ Individually configurable

❍ Modular design

❍ Modest space requirements

❍ Attractive industrial design

❍ Optional housing

❍ POLAB® APMplus sample preparation system

❍ Robust industrial robot

Technical dataDimensions: 2,420 x 2,020 x 2,550 mm (w x h x d)Power supply: 1-phasePower consumption: depends on the configurationCompressed air supply: 7 – 9 barCompressed air consumptionper sample: approx. 210 dm³

Capsule receiver Type: POLAB® ART

Sample preparation system Type: POLAB® APMplus(see separate brochure)

Input/output magazinePositions: 18 positions for cups

(volume: 80 cm³) or steel rings (diameter: 51.5 mm)

Sample storeContainers: 8 x 5 l, made of stainless steel,

with integrated dust extraction system (further variants upon request)

Robot Type: Stäubli TX60Lalternatives: ABB or Fanuc (further robot types upon request)

Advanced

Module

Technology