Poarta Culisanta Curte Comat.salaj.ro

CATALOGUEGATES

411A

�

HERCULE ®

MANTION HAS AN INTERNATIONAL REPUTATION BASED ON : Innovation and a permanent adaptation of its range of products to its customers’ needs. A quality product, which responds to the requirements of the strictest standards.

THE MANTION KNOW-HOW MEANS BEFORE ALL : Its team : people with experience and great skills who do their best to keep bringing you the best service. Its permanent investment policy combined to the newest technologies.

WITH MANTION, YOU BENEFIT FROM A TOP QUALITY SERVICE : Salesmen who listen to your needs and advise you. A strong technical aid : an engineering department and technical advisers at your disposal. The study and the development of special products upon request. Very short delivery time. Very high quality products.

MANTION, THIS IS ALSO A COMPLETE RANGE : Fittings for sliding and folding doors. Fittings for sectional doors. Fittings for glass doors. Fittings in stainless steel quality A2 and A4.

Since MANTION has always cared about bringing you the best services within its organization and quality for its products, it is now up to standard :ISO EN ISO 9001 : 2000

We offer you the widest range of fittingsfor sliding doors

�

HIGH QUALITY TRACKS

MANTION manufactures its tracks in its factory in Besançon according to its own production process. This ensures a long durability and an optimal reliability of its hardware products.

7, rue Gay Lussac - ZI de Trépillot - F-25000 BESANÇON - Tel : +33 3 81 85 38 73/74 - Fax : +33 3 81 53 29 76Web : http://www.mantion.com - Email : [email protected]

�

HERCULE ®

GATES MOUNTED ON PIVOTS

CANTILEVER GATES

BOTTOM SLIDING GATES

�

SUMMARY

This document is not contractual. All specifications can be modified without prior notice.

CANTILEVER GATES 6

Cantilever gates with aluminium track 7

Recommended construction for steel cantilever gates 8

Cantilever gates with steel track 14

Gear for steel cantilever gates 16

BOTTOM SLIDING GATES 17

Cast iron wheels on round or square tracks 17

Ground fixing tracks - screwing and sealing type 17

Steel wheels 18

Wheels with internal or external mounting brackets 19

Sets for gates 20

STAINLESS STEEL range 21

Accessories 22

GATES MOUNTED ON PIVOTS 25

Adjustable pivots and hinges for gates 25

Pivots 27

Invisible door closer 28

Accessories 29

THE MANTION RANGES 23

INDEX 24

�

HERCULE ® CANTILEVER GATES

DESCRIPTION :

There is no track on the ground.The tubular track is either screwed or welded under the gate.The gate slides on 2 hangers, which are fixed on a concrete socle situated on the push back side.According to the opening position of the gate, the hangers press either on the upper or on the lower part of the track.

ADVANTAGES :

l No track on the ground.l No concrete tie-beam is requested to support the track.l The only construction work consists in the concrete blocks.l No risk of wear or deformation of the track due to the passage of lorries.l No risk of ground deformation due to the weather changes.l No obstruction of the track trough dust, gravel, stone chips...l The gate can be installed on a non-stabilized or perfectly horizontal ground ( grass, gravel, mould...).

DIMENSIONS OF THE CONCRETE BLOCK :

BCL C

P

66

66

Length = entre axle B + 1 m (50 cm on each side)Width = 50 cmDepth = 80 cm

�

CANTILEVER GATES WITH ALUMINIUM TRACK

SINGLE HANGERS FOR ALUMINIUM TRACKS

9952 NHanger with polyamide wheels mounted on high- precision ball bearings.


DOUBLE HANGERS FOR ALUMINIUM TRACK


9968 NHanger with polyamide wheels mounted on high- precision ball bearings. 9958 N/9968 N

9952 N/9962 N

DOUBLE HANGERS FOR ALUMINIUM TRACKS Part Nr. L H l R A B C D

9958 N 300 140 150 83 150 150 108 60

9968 N 430 145 150 83 150 200 110 165

L

H

SINGLE HANGERS FOR ALUMINIUM TRACKS Part Nr. L H l R A B C D

9952 N 120 120 125 74 125 50 89 -

9962 N 145 140 150 81 150 60 110 -

R ±7

l

A

A

A

C

Ø 16.2

L

H

DØ 16.2

A

B

C

ALUMINIUM TRACKS

Part Nr. Material Length Weight L H O

10500 PAF6 Aluminium 6 m 29 Kg 65 150 17

10600 PAF6 Aluminium 6 m 39 Kg80 200 21

10600 PAF9 Aluminium 9 m 58 Kg

H

O

L

POSITION OF THE DRILLINGS Ø14,5 FOR ITEMS 1050 GA AND 1060 GA

Part Nr. L H Ø

10500 PAF 33 mm 17 mm 60 mm

10600 PAF 38 mm 20 mm 69 mm

10510 PAF10610 PAF

1050 GA1060 GA

LH

Ø

ACCESSORIES for ALUMINIUM TRACKS

10510 PAFAluminium ornemental cap for track 10500 PAFScrewing type.

10610 PAFAluminium ornemental cap for track 10600 PAFScrewing type.

1050 GA Supporting end wheel for track 10500 PAF

1060 GA Supporting end wheel for track 10600 PAF

HANGERS DIMENSIONS

GATES WITH ALUMINIUM TRACKTotal gate weight W

Opening width L

3 m. 3,5 m. 4 m. 4,5 m. 5 m. 5,50 m. 6 m.

80 kg 9952N 9952N 9952N 9962N 9962N

130 kg 9962N 9962N 9962N 9962N 9962N 9968N 9968N

160 kg 9958N 9958N 9958N 9958N 9968N 9968N 9968N

250 kg 9968N 9968N 9968N 9968N 9968N 9968N 9968N

POSITIONING OF THE HANGERSPart Nr. Opening width (m) Dimension C (m) Part Nr. Opening width (m) Dimension C (m)

9952 N 4 0,190 9958 N 4.5 0,280

9962 N 5 0,205 9968 N 6 0,295

�

HERCULE ®

RECOMMENDED GATE CONSTRUCTION FOR GATES OF 3 TO 5.5 M OPENING

T2 T3

T5

T4 T2

T1 L C B C

HHT

Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1

Verticalframe Rep T2

Uppergirder Rep T3

Bars Rep T5

QtyInterm.

reinforcement Rep T4

QtyWeight for

LT with track

3

1,00 0,9 4,4 0,9 9952PAF 90 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 115

1,10 1 4,4 0,9 9952PAF 95 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 120

1,20 1,1 4,4 0,9 9952PAF 95 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 120

1,30 1,2 4,4 0,9 9952PAF 105 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 130

1,40 1,3 4,4 0,9 9952PAF 105 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 130

1,50 1,4 4,4 0,9 9952PAF 115 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 140

3,5

1,00 0,9 5,1 1,1 9952PAF 106 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 135

1,10 1 5,1 1,1 9952PAF 111 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 140

1,20 1,1 5,1 1,1 9952PAF 116 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 145

1,30 1,2 5,1 1,1 9952PAF 121 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 150

1,40 1,3 5,1 1,1 9952PAF 126 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 155

1,50 1,4 5,1 1,1 9952PAF 126 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 155

4

1,00 0,9 5,65 1,2 9952PAF 118 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 150

1,10 1 5,65 1,2 9952PAF 123 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 155

1,20 1,1 5,65 1,2 9952PAF 128 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 160

1,30 1,2 5,75 1,3 9952PAF 138 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 170

1,40 1,3 5,8 1,35 9952PAF 143 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 175

1,50 1,4 5,9 1,45 9952PAF 147 60x60x3 60x60x3 60x60x3 20x20x2 45 x x 180

4,5

1,00 0,9 6,6 1,6 9952PAF 143 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 180

1,00 0,9 6,55 1,35 9958PAF 143 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 180

1,20 1,08 6,55 1,35 9958PAF 158 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 195

1,40 1,28 6,55 1,35 9958PAF 178 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 215

1,60 1,48 6,6 1,4 9958PAF 193 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 230

5

1,00 0,88 7,25 1,55 9958PAF 194 80x80x3 80x80x3 80x80x3 25x25x2 51 40x40x2 4 235

1,20 1,08 7,5 1,8 9958PAF 213 80x80x3 80x80x3 80x80x3 25x25x2 54 40x40x2 4 255

1,40 1,28 7,7 2 9958PAF 232 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 275

1,40 1,24 7 1,5 9962PAF 206 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 265

1,60 1,44 7 1,5 9962PAF 226 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 285

1,80 1,64 7 1,5 9962PAF 241 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 300

2,00 1,84 7 1,5 9962PAF 266 80x80x3 80x80x3 80x80x3 25x25x2 50 40X40X2 4 325

5,5

1,20 1,04 7,7 1,65 9962PAF 200 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 265

1,40 1,24 7,7 1,65 9962PAF 225 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 290

1,60 1,44 7,7 1,65 9962PAF 245 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 310

1,80 1,64 7,7 1,65 9962PAF 260 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 325

2,00 1,84 7,9 1,9 9962PAF 288 80x80x3 80x80x3 80x80x3 25x25x2 56 40x40x2 4 355

See hangers dimensions on p. 14 and 15

CANTILEVER GATES equipped with "PAF" hangers

�


Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1


Uppergirder Rep T3

Bars Rep T5

QtyInterm.


QtyWeight for

LT with track

3

1,00 0,9 4,4 0,9 9952PAF 90 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 115

1,10 1 4,4 0,9 9952PAF 95 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 120

1,20 1,1 4,4 0,9 9952PAF 95 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 120

1,30 1,2 4,4 0,9 9952PAF 105 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 130

1,40 1,3 4,4 0,9 9952PAF 105 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 130

1,50 1,4 4,4 0,9 9952PAF 115 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 140

3,5

1,00 0,9 5,1 1,1 9952PAF 106 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 135

1,10 1 5,1 1,1 9952PAF 111 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 140

1,20 1,1 5,1 1,1 9952PAF 116 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 145

1,30 1,2 5,1 1,1 9952PAF 121 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 150

1,40 1,3 5,1 1,1 9952PAF 126 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 155

1,50 1,4 5,1 1,1 9952PAF 126 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 155

4

1,00 0,9 5,65 1,2 9952PAF 118 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 150

1,10 1 5,65 1,2 9952PAF 123 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 155

1,20 1,1 5,65 1,2 9952PAF 128 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 160

1,30 1,2 5,75 1,3 9952PAF 138 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 170

1,40 1,3 5,8 1,35 9952PAF 143 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 175

1,50 1,4 5,9 1,45 9952PAF 147 60x60x3 60x60x3 60x60x3 20x20x2 45 x x 180

4,5

1,00 0,9 6,6 1,6 9952PAF 143 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 180

1,00 0,9 6,55 1,35 9958PAF 143 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 180

1,20 1,08 6,55 1,35 9958PAF 158 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 195

1,40 1,28 6,55 1,35 9958PAF 178 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 215

1,60 1,48 6,6 1,4 9958PAF 193 60x60x3 60x60x3 60x60x3 25x25x2 48 x x 230

5

1,00 0,88 7,25 1,55 9958PAF 194 80x80x3 80x80x3 80x80x3 25x25x2 51 40x40x2 4 235

1,20 1,08 7,5 1,8 9958PAF 213 80x80x3 80x80x3 80x80x3 25x25x2 54 40x40x2 4 255

1,40 1,28 7,7 2 9958PAF 232 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 275

1,40 1,24 7 1,5 9962PAF 206 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 265

1,60 1,44 7 1,5 9962PAF 226 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 285

1,80 1,64 7 1,5 9962PAF 241 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 300

2,00 1,84 7 1,5 9962PAF 266 80x80x3 80x80x3 80x80x3 25x25x2 50 40X40X2 4 325

5,5

1,20 1,04 7,7 1,65 9962PAF 200 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 265

1,40 1,24 7,7 1,65 9962PAF 225 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 290

1,60 1,44 7,7 1,65 9962PAF 245 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 310

1,80 1,64 7,7 1,65 9962PAF 260 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 325

2,00 1,84 7,9 1,9 9962PAF 288 80x80x3 80x80x3 80x80x3 25x25x2 56 40x40x2 4 355

Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1


diagonalUppergirder Rep T3

Bars Rep T5

QtyInterm.


Qty

Weight for LT with track

6

1,20 1,04 8,3 1,8 9962PAF 219 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 290





6,5


1,40 1,24 9 2 9962PAF 259 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 335




7







7,5






8






8,5






H

T2 T3 T4

T5

T2 T2

T1L C B C

HHT



CANTILEVER GATES equipped with "PAF" hangersCANTILEVER GATES equipped with "PAF" hangers

10

HERCULE ® CANTILEVER GATES equipped with "PAF" hangers


Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1


DiagonalUppergirder Rep T3

Bars Rep T5

QtyRenfort Interm Rep T4

Qty


9







9,5






10

1,40 1,19 13,7 3 9978PAF 641 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 860





10,5





2 1,79 14,5 3,3 9978PAF 868 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1100

C CL B

T2 T2 T2T3 T4

T5

T1

HHT


The data of the above table have been calculated by our calculation programme. You also have 2 possibilities of obtaining this information by yourself :

from the internet : surf on our web site : www.mantion.comYou will have the possibility either to download our calculation software or to give in the data of your gate online

on request, we can also send you our Mantion calculation Software on a CD-Rom

www.mantion.com

11

CANTILEVER GATES equipped with "S" hangersCANTILEVER GATES equipped with "PAF" hangers


Opening L

Height/ground

HT

Height H

Total length

LT

entre-axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1


Uppergirder Rep T3

Bars Rep T5

Qty Interm. Qty


3

1,00 0,9 4,4 0,9 9952S 80 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 105

1,10 1 4,4 0,9 9952S 85 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 110

1,20 1,1 4,4 0,9 9952S 90 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 115

1,30 1,2 4,4 0,9 9952S 95 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 120

1,40 1,3 4,4 0,9 9952S 100 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 125

1,50 1,4 4,4 0,9 9952S 105 60x60x3 60x60x3 60x60x3 20x20x2 33 x x 130

3,5

1,00 0,9 5,1 1,1 9952S 91 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 120

1,10 1 5,1 1,1 9952S 96 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 125

1,20 1,1 5,1 1,1 9952S 101 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 130

1,30 1,2 5,1 1,1 9952S 106 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 135

1,40 1,3 5,1 1,1 9952S 111 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 140

1,50 1,4 5,1 1,1 9952S 116 60x60x3 60x60x3 60x60x3 20x20x2 38 x x 145

4

1,00 0,9 5,7 1,2 9952S 103 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 135

1,10 1 5,7 1,2 9952S 108 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 140

1,20 1,1 5,7 1,2 9952S 113 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 145

1,30 1,2 5,7 1,2 9952S 118 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 150

1,40 1,3 5,7 1,2 9952S 123 60x60x3 60x60x3 60x60x3 20x20x2 43 x x 155

1,50 1,4 5,8 1,3 9952S 133 60x60x3 60x60x3 60x60x3 20x20x2 44 x x 165

4,5

1,00 0,9 6,4 1,35 9952S 124 60x60x3 60x60x3 60x60x3 25x25x2 47 x x 160

1,20 1,1 6,6 1,6 9952S 138 60x60x3 60x60x3 60x60x3 25x25x2 49 x x 175

1,20 1,06 6,45 1,35 9958S 134 60x60x3 60x60x3 60x60x3 25x25x2 49 x x 170

1,40 1,29 6,9 1,9 9952S 156 60x60x3 60x60x3 60x60x3 25x25x2 49 x x 195

1,40 1,26 6,45 1,35 9958S 154 60x60x3 60x60x3 60x60x3 25x25x2 47 x x 190

1,60 1,46 6,45 1,35 9958S 169 60x60x3 60x60x3 60x60x3 25x25x2 47 x x 205

5

1,00 0,86 7,1 1,5 9958S 170 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 210

1,20 1,06 7,1 1,5 9958S 185 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 225

1,40 1,26 7,1 1,5 9958S 205 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 245

1,60 1,46 7,1 1,5 9958S 225 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 265

1,80 1,66 7,1 1,5 9958S 240 80x80x3 80x80x3 80x80x3 25x25x2 50 40x40x2 4 280

2,00 1,86 7,1 1,5 9958S 265 80x80x3 80x80x3 80x80x3 25x25x2 50 40X40X2 4 305

5,5

1,12 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4

1,20 1,06 7,7 1,65 9958S 202 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 245

1,40 1,26 7,7 1,65 9958S 222 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 265

1,60 1,46 7,7 1,65 9958S 242 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 285

1,80 1,66 7,7 1,65 9958S 262 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 305

2,00 1,86 7,8 1,78 9958S 286 80x80x3 80x80x3 80x80x3 25x25x2 55 40x40x2 4 330

Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1



Bars Rep T5


Qty


9







9,5






10






10,5





2 1,79 14,5 3,3 9978PAF 868 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1100

RECOMMENDED GATE CONSTRUCTION FOR GATES OF 9 TO 10.5 M OPENING RECOMMENDED GATE CONSTRUCTION FOR GATES OF 3 TO 5.5 M OPENING

T2 T3

T5

T4 T2

T1L C B C

HHT

1�

HERCULE ® CANTILEVER GATES equipped with "S" hangers


Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1



Bars Rep T5

Qty Interm. Qty


6

1,20 1,06 8,4 1,85 9958S 218 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 265

1,40 1,26 8,4 1,85 9958S 243 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 290

1,60 1,46 8,4 1,85 9958S 268 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 315

1,80 1,66 8,7 2,15 9958S 311 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 360

1,80 1,65 8,5 1,8 9968S 337 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 385

6,5

1,20 1,06 9 1,95 9958S 235 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 285

1,40 1,26 9 1,95 9958S 260 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 310

1,60 1,46 9,5 2,45 9958S 312 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 365

1,60 1,45 9,15 1,95 9968S 312 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 390

1,80 1,65 9,15 1,95 9968S 352 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 430

2,00 1,85 9,15 1,95 9968S 377 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 45 40x40x2 4 455

7

1,20 1,06 9,75 2,5 9958S 275 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 330

1,40 1,25 9,8 2,1 9968S 307 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 390

1,60 1,45 9,8 2,1 9968S 337 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 420

1,80 1,65 9,8 2,1 9968S 377 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 460

2,00 1,85 9,8 2,1 9968S 402 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 485

7,5

1,20 1,06 10,65 2,6 9958S 295 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 355

1,20 1,05 10,45 2,25 9968S 296 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 385

1,40 1,25 10,45 2,25 9968S 326 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 415

1,60 1,45 10,45 2,25 9968S 356 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 445

1,80 1,65 10,45 2,25 9968S 401 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 490

2,00 1,85 10,5 2,3 9968S 431 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 520

8

1,20 1,05 11,1 2,4 9968S 321 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 415

1,40 1,25 11,1 2,4 9968S 351 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 445

1,60 1,45 11,1 2,4 9968S 391 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 485

1,80 1,65 11,2 2,5 9968S 435 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 530

2,00 1,85 11,5 2,8 9968S 467 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 565

8,5

1,20 1,05 11,8 2,6 9968S 350 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 450

1,40 1,25 11,8 2,6 9968S 375 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 475

1,60 1,45 11,8 2,6 9968S 410 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 510

1,80 1,65 12 2,8 9968S 463 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 565

2,00 1,85 12,5 3,3 9968S 494 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 600

2,00 1,79 11,9 2,55 9978S 490 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 680

RECOMMENDED GATE CONSTRUCTION FOR GATES WITH 6 TO 8.5 M OPENING

H

T2 T3 T4

T5

T2 T2

T1L C B C

HHT

1�

CANTILEVER GATES equipped with "S" hangersCANTILEVER GATES equipped with "S" hangers


Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

Lowergirder Rep T1



Bars Rep T5


Qty


9

1,30 1,15 13,2 3,5 9968S 498 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 610

1,3 1,09 12,55 2,7 9978S 479 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 680

1,40 1,19 12,55 2,7 9978S 504 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 705

1,60 1,39 12,55 2,7 9978S 549 160x80x4 80x80x3 80x80x3 120x80x3 40x40x2 57 60x60x3 6 750

1,80 1,59 12,55 2,7 9978S 604 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 57 60x60x3 6 805

2,00 1,79 12,55 2,7 9978S 654 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 57 60x60x3 6 855

9,5

1,30 1,09 13,2 2,9 9978S 519 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 730

1,40 1,19 13,2 2,9 9978S 539 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 750

1,60 1,39 13,2 2,9 9978S 589 160x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 800

1,80 1,59 13,2 2,9 9978S 654 180x80x4 80x80x3 80x80x3 140x80x3 40x40x2 60 60x60x3 7 865

2,00 1,79 13,2 2,9 9978S 754 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 60 60x60x3 7 965

10

1,40 1,19 13,85 3 9978S 643 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 865

1,50 1,29 13,85 3 9978S 668 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 890

1,60 1,39 13,85 3 9978S 698 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 62 80x80x3 7 920

1,80 1,59 13,85 3 9978S 768 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 62 80x80x3 7 990

2,00 1,79 13,9 3,1 9978S 828 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 62 80x80x3 7 1050

10,5

1,4 1,19 14,5 3,15 9978S 668 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 900

1,5 1,29 14,5 3,15 9978S 698 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 930

1,6 1,39 14,5 3,15 9978S 728 180x80x4 80x80x3 80x80x3 160x80x4 40x40x2 66 80x80x3 7 960

1,8 1,59 14,5 3,15 9978S 818 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1050

2 1,79 14,8 3,5 9978S 863 180x80x4 80x80x3 80x80x3 180x80x4 40x40x2 66 80x80x3 7 1100

Opening L

Height/ground

HT

Height H

Total length

LT

entre axle

B

ItemNr

Weight for LT

without track

Lowergirder Rep T1



Bars Rep T5

Qty Interm. Qty


6

1,20 1,06 8,4 1,85 9958S 218 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 265

1,40 1,26 8,4 1,85 9958S 243 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 290

1,60 1,46 8,4 1,85 9958S 268 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 43 40x40x2 4 315

1,80 1,66 8,7 2,15 9958S 311 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 360

1,80 1,65 8,5 1,8 9968S 337 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 41 40x40x2 4 385

6,5

1,20 1,06 9 1,95 9958S 235 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 285

1,40 1,26 9 1,95 9958S 260 80x80x3 80x80x3 80x80x3 80x80x3 25x25x2 46 40x40x2 4 310

1,60 1,46 9,5 2,45 9958S 312 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 365

1,60 1,45 9,15 1,95 9968S 312 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 390

1,80 1,65 9,15 1,95 9968S 352 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 45 40x40x2 4 430

2,00 1,85 9,15 1,95 9968S 377 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 45 40x40x2 4 455

7

1,20 1,06 9,75 2,5 9958S 275 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 330

1,40 1,25 9,8 2,1 9968S 307 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 390

1,60 1,45 9,8 2,1 9968S 337 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 48 40x40x2 4 420

1,80 1,65 9,8 2,1 9968S 377 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 460

2,00 1,85 9,8 2,1 9968S 402 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 48 40x40x2 4 485

7,5

1,20 1,06 10,65 2,6 9958S 295 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 355

1,20 1,05 10,45 2,25 9968S 296 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 385

1,40 1,25 10,45 2,25 9968S 326 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 415

1,60 1,45 10,45 2,25 9968S 356 120x80x3 80x80x3 80x80x3 80x80x3 30x30x2 52 40x40x2 5 445

1,80 1,65 10,45 2,25 9968S 401 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 490

2,00 1,85 10,5 2,3 9968S 431 120x80x3 80x80x3 80x80x3 120x80x3 30x30x2 52 40x40x2 5 520

8

1,20 1,05 11,1 2,4 9968S 321 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 415

1,40 1,25 11,1 2,4 9968S 351 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 445

1,60 1,45 11,1 2,4 9968S 391 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 55 40x40x2 5 485

1,80 1,65 11,2 2,5 9968S 435 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 530

2,00 1,85 11,5 2,8 9968S 467 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 55 40x40x2 5 565

8,5

1,20 1,05 11,8 2,6 9968S 350 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 450

1,40 1,25 11,8 2,6 9968S 375 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 475

1,60 1,45 11,8 2,6 9968S 410 140x80x3 80x80x3 80x80x3 80x80x3 30x30x2 58 40x40x2 6 510

1,80 1,65 12 2,8 9968S 463 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 565

2,00 1,85 12,5 3,3 9968S 494 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 600

2,00 1,79 11,9 2,55 9978S 490 140x80x3 80x80x3 80x80x3 120x80x3 30x30x2 58 40x40x2 6 680

RECOMMENDED GATE CONSTRUCTION FOR GATES WITH 6 TO 8.5 M OPENING RECOMMENDED GATE CONSTRUCTION FOR GATES WITH 9 TO 10.5 M OPENING

C CL B

T2 T2 T2T3 T4

T5

T1

HHT

www.mantion.comThe data of the above table have been calculated by our calculation programme. You also have 2 possibilities of obtaining this information by yourself :

from the internet : surf on our web site : www.mantion.comYou will have the possibility either to download our calculation software or to give in the data of your gate online

on request, we can also send you our Mantion calculation Software on a CD-Rom

1�

HERCULE ® CANTILEVER GATES WITH STEEL TRACK

ALL HANGERS ARE EQUIPPED WITH WATERPROOF BEARINGS

HIGH PERFORMANCE SINGLE HANGERS

9952 PAFHanger equipped with reinforced ball bearings.For track : 9050


9972 PAFHanger equipped with reinforced ball bearings.For track 9070

HIGH PERFORMANCE DOUBLE HANGERS




HANGERS "PAF" version

9958 PAF / 9968 PAF

9978 PAF

9952 PAF / 9962 PAF

9972 PAF

STEEL TRACK

Part Nr. Material Length Weight L H O e

9050/600* Galvanized steel6 m 35,5 Kg 65 60 18 3,5

9050N/600* Plain steel

9060/600* Galvanized steel6 m 51,5 Kg

80 75 22 4,59060N/600* Plain steel

9060/900* Galvanized steel9 m 77 Kg



90 110 25 69070N/600* Plain steel



HANGERS DIMENSIONS

SINGLE HANGERS WITH BACKLASH ADJUSTMENT Part Nr. L H l R A B C D

9952 PAF 151 98 100 42 100 135 60 92

9962 PAF 191 153 130 81 130 185 90 135

9972 PAF 230 205 170 99 170 230 130 170

DOUBLE HANGERS WITH BACKLASH ADJUSTMENT Part Nr. L H l R A B C D

9958 PAF 297 117 130 61 130 235 90 100

9968 PAF 379 153 150 81 150 310 110 165

9978 PAF 429 206 200 99 200 360 160 260

DØ 16.2

A

B

C

O

e

L

H

STEEL TRACK

* FOR TRACKS IN SPECIAL LENGTHS, PLEASE CONSULT US.

1�

CANTILEVER GATES WITH STEEL TRACK CANTILEVER GATES WITH STEEL TRACK

"S" version HANGERS

ACCESSORIES

DOUBLE HANGERS WITH GUIDING WHEELPart Nr. L H l R A B C D

9958 S 300 140 150 83 150 150 110 60

9968 S 430 145 150 83 150 200 110 165

9978 S 560 196 200 103 200 300 160 260l

R ±7

DØ 16.2

A

B

C

SINGLE HANGERS WITH GUIDING WHEELPart Nr. L H l R A B C D

9952 S 241 90 106 45 106 50 70

9962 S 209 141 130 83 130 170 90 135

9972 S 275 196 170 103 170 210 130 170

A

A

A

C

Ø 16.2

SINGLE HANGERS WITH GUIDING WHEEL

9952 SHanger with steel wheels mounted on high-precision ball bearings.For track : 9050


9972 SHanger with steel wheels mounted on high-precision ball bearings For track : 9070

DOUBLE HANGERS WITH GUIDING WHEEL


9968 SHanger with steel wheels mounted on high-precision ball bearings. For track : 9060


9958 S

9962 S9972 S

9952 S

9968 S9978 SHANGERS DIMENSIONS

1051 G/1061 G/1071 G 1050 E /1060 E/1070 E

Part Nr. Designation

1050 E End guide for track 9050

1060 E End guide for track 9060 and 10500 PAF.

1070 E End guide for track 9070 and 10600 PAF

1051 G End wheel support for track 9050.



1�

HERCULE ® SET FOR CANTILEVER GATES

SET

9050 GPAF

Set comprising :

2 single hangers 9952 PAF

2 end wheel supports 1051 G

2 end guides 1050 E

2 adjustable guides 1062

TRACK

9050/600 Track for hangers 9952 PAF in galv. steel.6 m long

9050N/600 Track for hangers 9952 PAF in plain steel.6 m long

1062

1050 E

1051 G9050

CBCL

H

9952 PAF

Example of cantilever gate structure :

9050 GPAF

SET FOR CANTILEVER GATES UP TO :4 M OPENING AND 200 KG WEIGHT

1�

SET FOR CANTILEVER GATES BOTTOM SLIDING GATES

Needle bearing

Ball bearings

980/990/1000

TRACKS for hangers and wheels described on p. 18 and 19.


980 GR Hanger with round groove wheel

980 GCHanger equipped with square groove wheel

990 GRHanger equipped with round groove wheel


1000 GRHanger equipped with round groove wheel


1008 GR Round groove wheel with needle bearing

1008 GC Square groove wheel with needle bearing

1009 GR Round groove wheel with ball bearings

1009 GC Square groove wheel with ball bearings

1010 GR Round groove wheel with ball bearings

1010 GC Square groove wheel with ball bearings

HANGERS WITH ROUND GROOVE WHEEL GRHANGERS WITH SQUARE GROOVE WHEEL

GC

Part Nr. Capacity/wheel A B C D E F G Ø

TrackØ P

Ø Screw M

equipped with the wheel

Part Nr. Ø Ext. Ø Base of the wheel

Width of the wheel

equipped with the wheel

980 GR 150 kg 220 140 90 95 43 102 83 20 11 12x60 1008 GR 980 GC 102 86 16 14X14 1008 GC

990 GR 250 kg 300 180 125 130 60 150 123 30 15 20x100 1009 GR 990 GC 150 124 28 25x25 1009 GC

1000 GR 500 kg 300 180 125 130 71 180 152 35 15 20x100 1010 GR 1000 GC 180 154 34 30x30 1010 GC

CAST IRON WHEELS

9050

Ø19

3

60

60°

17

90°65

Ø6.5

3

Joining piece for tracksTRACKS - SCREWING TYPE FOR ROUND GROOVE L : 3 M

20012 RV/3In galvanized steelD = 12 ; d = 8 ; e = 2 ; H = 10 ; P = 6,5 ; L = 60

20016 RV/3In galvanized steelD = 15,5 ; d = 10,5 ; e = 2,5 ; H = 16 ; P = 6,5 ; L = 60

20016 M Joining piece for track 20016 RV/3

20020 RV/3In galvanized steelD = 19 ; d = 12 ; e = 3,5 ; H = 15 ; P = 8,5 ; L = 80

20020 M Joining piece for track 20020 RV/3

20021 RV/3In galvanized steelD = 19 ; d = 13 ; e = 3 ; H = 16 ; P = 6,5 ; L = 60

TRACKS - SCREWING TYPE FOR TRIANGULAR GROOVE L : 3 M.

20021 VV/3 In galvanized steel. H = 17 ; P = 6,5 ; L = 65 ; e = 3

TRACKS - SEALING TYPE FOR ROUND GROOVE L : 3 M.

20021 RS/3 In galvanized steel. D = 19 ; d = 13 ; e = 3 ; H = 60

1�

HERCULE ® BOTTOM SLIDING GATES

STEEL WHEELS ON ROUND OR TRIANGULAR TRACKS

ALL STEEL WHEELS ARE EQUIPPED WITH WATERPROOF BALL BEARINGS

* The capacity per wheel (which is different from the capacity of the bearing) includes the force required for the displacement of the gate. This capacity will determine the choice of the wheel, according to the weight of the

gate. Exemple : the type of wheel required for the equipment of a 800 kg gate is 20100R20.

STEEL WHEELSRound groove "V" groove Capacity/

wheel*Capacity of

ball bearings Ø D A B C Screw dimensions

- 20061 V10 100 315 60 10 14 19 M 10x45

20061 R12 20061 V12 100 315 60 12 16 19 M 10x45

20061 R16 - 100 315 60 16 20 32 M 10x60

20081 R12 20081 V12 200 455 80 12 16 32 M 14x70

20081 R16 - 200 455 80 16 20 32 M 14x70

20081 R20 20081 V20 200 455 80 20 25 32 M 14x70

20091 R12 20091 V12 200 455 90 12 16 32 M 14x70

20091 R16 200 455 90 16 20 32 M 14x70

20101 R12 20101 V12 200 455 100 12 16 32 M 14x70

20101 R16 - 200 455 100 16 20 32 M 14x70

20101 R20 20101 V20 200 455 100 20 25 32 M 14x70

20100 R20 20100 V20 400 670 100 20 25 32 M 14x70

20121 R16 - 225 455 120 16 20 32 M 14x70

20121 R20 20121 V20 225 455 120 16 25 32 M 14x70

20120 R20 20120 V20 500 670 120 20 25 32 M 14x70

20141 R16 - 250 455 140 16 20 32 M 14x70

20141 R20 20141 V20 250 455 140 20 25 32 M 14x70

20140 R20 20140 V20 550 670 140 20 25 32 M 14x70

20161 R16 - 300 455 160 16 20 32 M 14x70

20161 R20 20161 V20 300 455 160 20 25 32 M 16x70

20160 R20 20160 V20 700 880 160 20 25 32 M 16x70

20200 R20 20200 V20 750 880 200 20 25 32 M 16x70

reinforced ball bearings

1�

BOTTOM SLIDING GATES BOTTOM SLIDING GATES

STEEL WHEELS WITH EXTERNAL MOUNTING BRACKET

round groove "V" groove Capacity/wheel*

Capacity of ball

bearingsØ D L L1 A B C E

21081 R16 - 200 455 80 120 90 16 20 40 4621081 R20 21081 V20 200 455 80 120 90 20 25 40 4621101 R16 - 200 315 100 120 90 16 20 40 5621101 R20 21101 V20 200 455 100 120 90 20 25 40 46

21100 R20 21100 V20 400 670 100 120 90 20 25 40 56

D

reinforced ball bearings

STEEL WHEELS WITH INTERNAL MOUNTING BRACKET

round groove "V" groove Capacity/wheel*

Capacity of ball

bearingsØ D L L1 L2 A B C E

22081 R16 - 200 455 80 138 119 98 16 20 32 25.522081 R20 22081 V20 200 455 80 138 119 98 20 25 32 25.522101 R16 - 200 455 100 138 119 98 16 20 32 35.522101 R20 22101 V20 200 455 100 138 119 98 20 25 32 35.5

22100 R20 22100 V20 400 670 100 138 119 98 20 25 32 35.522121 R16 - 225 455 120 186 162 138 16 20 32 38.522121 R20 22121 V20 225 455 120 186 162 138 20 25 32 38.5

22120 R20 22120 V20 500 670 120 186 162 138 20 25 32 38.522141 R16 - 250 455 140 186 162 138 16 20 32 48.522141 R20 22141 V20 250 455 140 186 162 138 20 25 32 48.5

22140 R20 22140 V20 550 670 140 186 162 138 20 25 32 48.5

STEEL WHEELS WITH EXTERNAL MOUNTING BRACKETS

WHEELS WITH INTERNAL MOUNTING BRACKETS In steel and stainless steel

EASY and QUICK mounting Reduced space between the gate and the ground - Welding and screwing types

These hangers can be embedded in a 40 mm frame

�0

HERCULE ®

SET for manual gates up to 200 Kg

20016 RG

Set including :

2 steel wheels 22081R16

2 jointing brackets 20016M


1 stop (screwing type) 2099 V

1 gear of lock mortising type 957

1 double handle in zamac 1295/50

SET for motorized gates up to 200 Kg

20116 RG

Set including :





1062

20016M

SET for manual gates up to 400 Kg weight

20021 RG

Set comprising :



1 adjustable double guide 1065


1 gear of lock mortising type 957

1 double handle in zamak 1295/50

SET for motorized gates up to 400 Kg weight

20121 RG

Set comprising :



1 extensible guide 1065


957

1295/50

2099 V

22081R16

1062 20016M

2099 V22081R16

1065

20020M

957

1295/50

2099 V

22100R20

2099 V 22100R20

20020M1065

20016 RV/3 / 20021 RV/3 20021 RS/3

�001� RG

�011� RG

�00�1 RG

�01�1 RG

Track Ø 16 mm for gates up to 200 Kg

20016 RV/3Track in galvanised steel - Screwing typeLength = 3 m. - Width = 60 mm - Thickness = 2.5 mm

Track Ø 20 mm for gates up to 400 Kg

20021 RV/3Track in galvanised steel - Screwing typeLength = 3 m. - Width = 60 mm - Thickness = 3 mm

20021 RS/3Track in galvanised steel - Sealing typeLength = 3 m. - Width = 60 mm - Thickness = 3 mm

SETS FOR BOTTOM SLIDING GATES

SETS for gates up to 200 and 400 Kg - manual or motorized

�1

INOX RANGE for bottom sliding gatesSETS FOR BOTTOM SLIDING GATES

SCREWING TYPE TRACK FOR ROUND GROOVE - L : 3 M

20020 RVX/3 STAINLESS STEEL track Ø 20 - Length = 3 m.

20020M Joining piece

SEALING TYPE TRACK FOR ROUND GROOVE - L : 3 M

20020 RSX/3 STAINLESS STEEL track Ø 20 - Length = 3 m.

Ø19

3

60

60°

Joining piece for profileSTAINLESS STEEL TRACKS - SCREWING AND SEALING TYPES

STAINLESS STEEL WHEELS for round groove reinforced ball bearings

STAINLESS STEEL WHEELSround groove Capacity/

wheel (Kg)Capacity of ball bearings (Kg) Ø D A B C Screw dimensions

20100 R20 X 400 670 100 20 25 32 M 14x70

20120 R20 X 500 670 120 20 25 32 M 14x70

STAINLESS STEEL WHEELS WITH INTERNAL MOUNTING BRACKETround groove Capacity/

wheel (Kg)Capacity of ball bearings (Kg) Ø D L L1 L2 A B C D E

22100 R20 X 400 670 100 138 119 98 20 25 32 69 35.522120 R20 X 500 670 120 186 162 138 20 25 32 79.5 38.5

D

STAINLESS STEEL ACCESSORIES

Lock Nr 954 XSee description on p. 22

Lock Nr 958See description on p. 22

Pull Nr 1290 XSee description on p. 23

Guide Nr 23040 XSee description on p. 22

��


LOCKS - Mortising type

LOCKS with 8 mm square - Mortising type

Item Nr Designation

954

Hook lock in galvanised steel. Supplied with European Cylinder and 3 keys.A = 96 ; B = 60 ; C = 174

954 XHook lock in stainless steel. Supplied with European Cylinder and 3 keys.A = 106 ; B = 60 ; C = 185

955

Monoblock lock, in galvanised steel. Supplied with a keeper of lock without cylinder.A = 96 ; B = 60 ; C = 174

954 C40Box for lock 954 and 955.For a 40 mm tube.A = 65 ; B = 20 ; C = 40

954 C50Box for lock 954 and 955.For a 50 mm tube.A = 55 ; B = 10 ; C = 50

LOCKS with 8 mm square - Surface mounted

Item Nr Designation

958-40-A

Frame, mecanism and sliding bolt in STAINLESS STEEL. Box and handles in aluminium, silver colour. Nickeled cylinder 54 mm. European profileFor 40 mm tube.

958-50-A Ditto for 50 mm tube

958-40-B

Frame, mecanism and sliding bolt in STAINLESS STEEL. Box and handles in aluminium, white painted. Nickeled cylinder 54 mm. European profileFor 40 mm tube.

958-50-B Ditto for 50 mm tube

KEEPER for locks 958

958 G

Keeper of lock in STAINLESS STEEL for a tube of min. 80x40 mmEquipped with a rubber joint as shock absorber.

958 GCDitto with frame. To be used with a flat bar.

954955

954 C

44

15

12

2 x Ø5.5 pour la fixation

B

16

25

C

4

130

35

41

A

Ø12

54

59

210

20

30

72

8x8

12

B

A

72

C

175

B

958

958 G958 GC

Ø M8

75

24

50

140

189

90

75

24

189

2 M8

140

Ø19

Ø15

Ø9

30

4814

0

40x40

��

BOTTOM SLIDING GATES BOTTOM SLIDING GATES

HANDLES

RACKS

1290

1297 1298

2222 CR

3012 CR

1708 PL 3012 CP

1295

TURNING HANDLES for locks with a 8 mm square

Item Nr Designation

1295/50Double handle in Zamak.For 40 to 50 mm tubesvis en bout -XXX 8 mm square

1295/70Double handle in Zamak.For 30 to 70 mm tubesbinding screw - 8 mm square

TUNRING HANDLES for locks with a 7 mm square

1295/60Handle in white painted aluminium.For 30 to 70 mm tubes7 mm square (For locks Nr 957)

HANDLES - Screwing type

1290Dished flush pull, galvanised steel.Height : 200 mm - Width : 90 mm

1290 XDished flush pull, in stainless steel.Height : 200 mm - Width : 90 mm

1297Handle on a 265 mm platein galvanised steel.

1298Handle with end fasteners in galvanised steel.Length : 245 mm

cylindre européen.

CARRE 7X7

228

42

Ø8

Ø5,5

28

172

24 11

2

65,5

70

20

LOCKS with 7 mm square - Mortising type

Item Nr Designation

957

Frame and mechanism in stainless steel, sliding bolt and end section in STAINLESS STEEL.Handle plates in white painted aluminium.Keeper of lock in white painted brass.For European profile cylinder of 54 mm

RACKS AND SPACING PIECE

2222 CRRack for motorized gates. Length 1 m. Module 4.22 x 22 in galvanised steel.

3012 CR

Rack for motorized gates. Length 1 m. Module 4.Drilled for M8 screw.30 x 12 in black varnished steel.3 plots 1708 PL/rack are requested.

3012 CPRack with overmoulded core, 20 x 77mm.Length : 0.33 m - Module 4.

1708 PLSpacing piece in galvanised steelfor the fixing of racks. M8 screw.

1295/60

��


GUIDES - PILLAR COVER - STOPS

2099

1053

1052 334400

67 mini275 maxi

45

D

B

A

C

30 à 62

21

90

78 41

Ø 9

GUIDES


1052Adjustable upper guide Sealing type. For bottom sliding gate. Equipped with the 1050 guide.

1052 LDitto equipped with the 23040 L guide.

1053Adjustable upper guide Sealing type. For bottom sliding gate. Equipped with the 1050 guide.

1053 LDitto equipped with the 23040 L guide.

1050

Guide without plate mounted on needle bearing with a nylon olive.Supplying with the 1052 and 1053 guides.Ø 50 mm - Height 25 mm.

1059

Lower guide mounted on needle bearing with a nylon olive and fixed on a screwing plate for U 50 x 60. Ø 50 mm - Height 25 mm.

1115/600U-channel 50 x 60 in galvanized steel - Length : 6 meters.

23025Guide with a nylon olive.A = 65 - B = 25 - C = 35 - D = 14


23040 BGuide with a convex nylon olive.A = 84 - B = 40 - C = 40 - D = 14


23040 LLong guide with a nylon olive.A = 102 - B = 40 - C = 60 - D = 16

23040 XGuide with a stainless steel axle and a nylon olive.A = 84 - B = 40 - C = 40 - D = 14

1062Upper guide with 2 adjustable olives (Ø 40) for a 40 to 70 mm tubeLength : 105 mm.

1064Upper guide with 4 adjustable olives (Ø 40) for a 40 to 70 mm tubeLength : 245 mm.

1065Upper guide with 4 adjustable olives (Ø 40) for 40 to 60 mm tubeLength : 220 mm.

0CP20Square steel pillar cover. Welding type, 20 x 20 mm

0CP30 Ditto 30 x 30 mm








2099Galvanized stop, welding typeFor sliding gates

2099 V Ditto screwing type

1050

1059

1064

1062

230252303023040

1115/600

23040 B

2099 V

10650CP

��

BOTTOM SLIDING GATES GATES MOUNTED ON PIVOTS

25040 V25050 V

25040 S 25050 S

PIVOT WITH FASTENERS for gates up to 80 Kg

25040 S Pivot for gate in 40 tube, sealing type. Pivot

35 mm25040 V Pivot for gate in 40 tube, screwing type.

25050 S Pivot for gate in 50 tube, sealing type. Pivot

45 mm25050 V Pivot for gate in 50 tube, screwing type.

25040 BS

25050 BS

low

er p

art

up

per

par

t

EXTENSIBLE HINGES - WELDING TYPE

25060 SOThis hinge enables a 10 mm adjustment by unscrewing the upper nut and tightening it once the required position has been reached.

38

35

6187

34

36+/- 5mm

opening 180° !

F

G

D

E

H

R

C

L=120

A

B

HINGES - WELDING TYPE

Part Nr. A B R C D E F G HGate

weight (kg)

25184 SO 50 100 29 to 49 35 M18 40 42 22 8 100

25204 SO 50 100 31 to 51 35 M20 40 42 22 8 100

25224 SO 60 100 38 to 58 35 M22 70 50 30 10 150

25244 SO 60 100 40 to 60 35 M24 70 50 30 10 150

CAST IRON PIVOTS

25040 BS

Pivot in cast iron (welding type) including :1 upper part1 lower part (mounted on ball)

Pivot

35 mm

25050 BS

Pivot in cast iron (welding type) including :1 upper part1 lower part (mounted on ball)

Pivot

45 mm

ALL PIVOTS ARE EQUIPPED WITH AN OILER

��

HERCULE ® GATES MOUNTED ON PIVOTS

D

R

A E

C

R

A E

C

D

D

B

A

E

C

D

B

A

E

C

HINGS - WELDING TYPE with screwing type cap

Part Nr. A R C D E Gate weight (kg)

25163 76 10 to 30 25 M16 34 10025183 80 12 to 34 25 M18 34 15025203 84 14 to 38 25 M20 34 15025223 88 14 to 41 25 M22 34 20025243 92 17 to 46 25 M24 34 200

HINGES- WELDING TYPE with screwing type cap

25163 SO 74 10 to 30 25 M16 34 10025183 SO 78 12 to 34 25 M18 34 15025203 SO 82 14 to 38 25 M20 34 15025223 SO 86 14 to 41 25 M22 34 20025243 SO 90 17 to 46 25 M24 34 200

HINGES - SEALING TYPE with screwing type cap

Part Nr. A R C D E Gate weight (kg)

25162 60 42 to 60 25 M16 38 8025182 64 42 to 62 25 M18 38 10025202 75 40 to 62 25 M20 38 10025222 80 43 to 66 25 M22 38 15025242 80 43 to 69 25 M24 38 150

HINGES - SEALING TYPE with screwing type cap

25162 SO 60 42 to 60 25 M16 38 8025182 SO 64 42 to 62 25 M18 38 10025202 SO 75 40 to 62 25 M20 38 10025222 SO 80 43 to 66 25 M22 38 15025242 SO 80 43 to 69 25 M24 38 150

ADJUSTABLE HINGES FOR GATES UP TO 150 kg

HINGES- SCREWING TYPE with screwing type cap

Part Nr. A B C D E Gate weight (kg)

25163 L 172 125 25 M16 38 10025183 L 182 135 25 M18 38 15025203 L 192 143 25 M20 38 20025223 L 202 152 25 M22 38 20025243 L 212 160 25 M24 38 300

HINGES - SCREWING TYPE with screwing type cap

25163 SOL 170 125 25 M16 38 10025183 SOL 180 135 25 M18 38 15025203 SOL 190 143 25 M20 38 20025223 SOL 200 152 25 M22 38 20025243 SOL 210 160 25 M24 38 300

C

D

R

A

E

D

A

ER

C

B

A

C

D

R

F

E

HINGES ON PLATE - SCREWING TYPE

Part Nr. A B R C D E F Gate weight (kg)

25185 100 80 25 to 38 25 M18 42 35 150

25205 100 84 25 to 42 25 M20 42 35 150

25225 120 88 29 to 45 29 M22 42 35 200

25245 120 92 29 to 50 29 M24 42 35 200

��

GATES MOUNTED ON PIVOTSGATES MOUNTED ON PIVOTS

C

D

R

A

E

D

A

ER

C

B

A

C

D

R

F

E

PIVOTS WITH BALL BEARINGS FOR GATES UP TO 750 KG

ADJUSTABLE PIVOTS - WELDING TYPE


25051 X

Pivot Ø 50 in stainless steel, with welding fastener for heavy manual or motorized gates. Adjustable on the upper part.Comprising :- upper part- lower part

25051

Pivot Ø 50 in galvanized steel with welding fastener for heavy manual or motorized gates.Adjustable on the upper part.Comprising :- upper part- lower part

25051 B Lower part of pivot 25051

25051 H Upper part of pivot 25051

25071

Adjustable pivot Ø 70 in galvanized steel, with welding fastener for heavy manual or motorized gates. Comprising : - upper part- lower part

25071 B Lower part of pivot 25071.

25071 H Upper part of pivot 25071.

ADJUSTABLE PIVOTS - SCREWING TYPE

25052

Pivot Ø 50 (screwing type) in galvanized steel with "L" screwing fastener, for heavy manual or motorized gates.Comprising : - upper part- lower partThe screws enable an adjustment on both upper and lower parts.

25052 B Lower part of pivot 25052.

25052 H Upper part of pivot 25052.

25072

Pivot Ø 50 (screwing type) in galvanized steel with "L" fastener, for heavy manual or motorized gates.Comprising :upper part- lower partThe screws enable an adjustment on both upper and lower parts.

25072 B Lower part of pivot 25072

25072 H Upper part of pivot 25072

PIVOTS 25051 X and 25052

MAX. GATE WEIGHT (Kg) ACCORDING TO WIDTH "L" AND HEIGHT "H"

H L 1.5 m 2 m 2.5 m 3 m 3.5 m 4 m 4.5 m 5 m

1 m 350 350 300 250 214 187 166 150

1.5 m 350 350 350 350 320 280 250 225

2 m 350 350 350 350 350 350 333 300

2.5 m 350 350 350 350 350 350 350 350

3 m and + 350 350 350 350 350 350 350 350

PIVOTS 25071 and 25072

MAX. GATE WEIGHT (Kg) ACCORDING TO WIDTH "L" AND HEIGHT "H"

H L 1.5 m 2 m 2.5 m 3 m 3.5 m 4 m 4.5 m 5 m 5.5 m 6 m

1 m 750 750 600 500 428 375 333 300 272 250

1.5 m 750 750 750 750 643 562 500 450 409 375

2 m 750 750 750 750 750 750 666 600 545 500

2.5 m 750 750 750 750 750 750 750 750 681 625

3 m and + 750 750 750 750 750 750 750 750 750 750

Part Nr. A B ØD ØE F

25051 X 100 50 25 77 77±7

25051 100 50 50 25 77±7

25071 120 60 70 30 97±7

Ø D

Ø E

Ø D

A B

F

C

Ø D

Ø E

Ø D

A B

F

Part Nr A B C ØD ØE F

25052 110 50 60 50 25 85±7

25072 130 60 60 70 30 108±7

��

HERCULE ® GATES MOUNTED ON PIVOTS

INVISIBLE DOOR CLOSER

Item Nr. Designation

25310 D

25310 G

Pivot working in simple action, integrable in tubular tracks starting at Ø 40. For doors up to 80 kg.Entirely concealed system avoiding any deterioration.

25310 D : opening on the right25310 G : opening on the left

25318 D

25318 G

Pivot working in simple action, integrable in tubular tracks starting at Ø 50. For doors up to 200 kg.Entirely concealed system avoiding any deterioration.

25310 D : opening on the right25310 G : opening on the left

Concealed system :

avoids deterioration !

UTLIZATION FOR GATEIt is recommended to place a pivot in the upper part :Item Nr 25051 H : Welding versionItem Nr 25052 H : Screwing version

UTLIZATION FOR DOOR A special upper pivot for door is supplied with our door-closer.

HIGH-CLOSING STRENGTHThanks to a special high performance spring.

EASY SPEED ADJUSTMENT By moving the adjusting wheel in both directions. High precision and large range of adjustment.

SMOOTH CLOSINGThe hydraulic mechanism of this door closer guarantees a silent and smooth closing for all kinds of gates and doors and a durability of over 500.000 opening/closing cycles.

EASY MOUNTINGThe small sized fixing plate enables the utilization of this pivot for all types of doors and gates.

SLIDING SEATFacilitates the installation on site.

ADJUSTABLE CLOSING STRENGTHThrough adjustment of the spring.

Detailed view of the access trap

Opening direction

left

right

��

GATES MOUNTED ON PIVOTS GATES MOUNTED ON PIVOTS

12971298 1314/1316

1314 SO1316 SO

1314 GE/1316 GE

1314 GP/1316 GP

1303 V

2090 S

2090 V

2097 S

2097 V

1303 S

Item Nr. Designation

1297Handle on a 25 mm plate in galvanized steel.

1298Handle with end fastener, chased, in galvanized steel. Lengh : 245 mm.

1314Reinforced cane bolt. Screwing type.Length : 300 mm, Ø 14.

1314 SOReinforced cane bolt. Welding type.Length : 300 mm, Ø 14.

1316Reinforced cane bolt. Screwing type. Length : 500 mm, Ø 16.

1316 SOReinforced cane bolt. Welding type.Length : 500 mm, Ø 16.

1316 BBolt with padlock holder. Case in cast iron, cane and keeper in steelWeight : 660 gr. - Ø 16 mm

1314 GPKeeper of lock with end fastener for cane bolt 1314 and 1314 SO.

1316 GPKeeper of lock with end fastener for cane bolt 1316 and 1316 SO.

1314 GEKeeper of lock for setting in for cane bolt 1314 and 1314 SO.

1316 GEKeeper of lock for setting in for cane bolt 1316 and 1316 SO.

1303 S

Adjustable tilting gate stop with cataphoresis protection, sealing typeSpacing : 40-70 mm Height : 50 mm Width : 40 mm - Length : 150 mm.

1303 V

Adjustable tilting gate stop, in galvanized steel, screwing typeSpacing : 40-70 mm Height : 120 mmWidth : 40 mm - Length : 145 mm.

2090 SMiddle gate stop, sealing typeHeight : 85 mmWidth : 60 mm - Length : 100 mm.

2090 VMiddle gate stop, screwing typeWidth : 60 mm - Length : 100 mm.

2097 SMiddle gate stop, sealing typeHeight : 115 mm - Width : 100 mm Length: 160 mm.

2097 VMiddle gate stop, screwing type Height : 40 mm - Width : 100 mm Length : 140 mm.

ACCESSORIES

1316 B

�0

HERCULE ® THIS IS ALSO ...

THE MINISPORT® RANGE :

MINITUB, sliders and accessories for light doors up to 6 kg on an aluminium track.

PICO accessories for doors up to 25 kg on a PVC track for doors up to 55 kg

on an aluminium track

MEDIUM, fittings for light doors up to 14 kg and for curtains

up to 4 kg maxi/hanger.

TUBEL, fittings for doors up to 38 kg on an aluminium or galvanized tracks.

CADETTE-SUPER CADETTE, fittings for doors up to 60 kg on a galvanized steel track

OLYMPIC, fittings for doors up to 50 kg on a differential telescopic gear

SAF, fittings for doors up to 120 kg on an aluminium track with an aluminium anodized pelmet

5300, fittings for folding doors up to 15 kg

1300, «MANTION» shutter stays

THE SPORTUB® RANGE :

200 and 2200, fittings for straight SLIDING doors up to 2000 kg on 35 x 30 to 85 x 70 tubular tracks

300, fittings for ANGLE sliding doors on 35x30 to 85x70 tubular tracks

500, fittings for FOLDING doors with equal leaves on 35 x 30 to 85 x 70 tubular tracks

600, fittings for FOLDING doors with a half leaf on 35 x 30 to 85 x 70 tubular tracks

4000, fittings for up and over doors

7000, fittings for sectional doors

SPORT, fittings for straight SLIDING doors on a flat track

BOB, fittings for ANGLE sliding doors on a flat track

MANUTENTION, tubular monorails, switches and cable carriers

TUBULAR TRACKS and FIXING ACCESSORIES

THE RANGE FOR HANDLING SYSTEM /

TROLLEYS and LOAD CARRIERS

CURVES, SWITCHES, ELEVATING STATIONS and CONVEYORS

OVERHEAD CRANES, CABLE CARRIERS and JIBS

ALUMINIUM AND STEEL TRACKS

FIXING ACCESSORIES

THE HERCULE® RANGE :

9200, fittings for straight SLIDING doors up to 3000 kg

9300, fittings for ANGLE sliding doors

9500, fittings for FOLDING doors with equal leaves

9600, fittings for FOLDING doors with a half leaf

STAINLESS STEEL PRODUCTS

AIRSTOP, fittings for airtight doors up up to 400 kg.

ALUMINIUM and STEEL TRACKS

FIXING ACCESSSORIES

DO NOT HESITATE TO REQUEST OUR CATALOGUES OR LEAFLETS ABOUT :

�1

INDEXTHIS IS ALSO ...

954 LOCK 22

954 X LOCK 22

954 C40 HOOK LOCK 22

954 C50 HOOK LOCK 22

955 LOCK 22

957 LOCK 23

958-40-A LOCK 22

958-40-B LOCK 22

958-50-A LOCK 22

958-50-B LOCK 22

958 G KEEPER OF LOCK 22

958 GC KEEPER OF LOCK 22

980 GC HANGER 17

980 GR HANGER 17

990 GC HANGER 17

990 GR HANGER 17

1000 GC HANGER 17

1000 GR HANGER 17

1008 GC CAST IRON WHEEL 17

1008 GR CAST IRON WHEEL 17

1009 GC CAST IRON WHEEL 17


1010 GC GUIDE 17


1050 GUIDE 24

1050 E GUIDE 15

1050 GA WHEEL 7

1051 G SUPPORT 15

1052 GUIDE 24

1052 L GUIDE 24

1053 GUIDE 24

1053 L GUIDE 24

1059 GUIDE 16

1060 E GUIDE 15

1060 GA END WHEEL 7

1061 G SUPPORT 15

1062 GUIDE 24

1064 GUIDE 24

1065 GUIDE 24

1070 E GUIDE 15

1071 G SUPPORT 15

1115/600 U-CHANNEL 24

1290 PULL 23

1290 X PULL 23

1295/50 HANDLE 23

1295/60 HANDLE 23

1295/70 HANDLE 23

1297 HANDLE 23

1298 HANDLE 23

1303 S GATE STOP 29

1303 V GATE STOP 29

1314 CANE BOLT 29

1314 GE KEEPER OF LOCK 29

1314 GP KEEPER OF LOCK 29

1314 SO CANE BOLT 29

1316 CANE BOLT 29

1316 B BOLT 29

1316 GE KEEPER OF LOCK 29

1316 GP KEEPER OF LOCK 29

1316 SO CANE BOLT 29

1708 PL SPACING PIECE 23

2090 S STOP 29

2090 V STOP 29

2097 S STOP 29

2097 V STOP 29

2099 STOP 24

2099V STOP 24

2222 CR RACK 23

3012 CR RACK 23

3012 CP RACK 23

9050/600 TRACK 14

9050 GPAF SET "PAF" 16

9050N/600 TRACK 14

9060/600 TRACK 14

9060N/600 TRACK 14

9060/900 TRACK 14

9060N/900 TRACK 14

9070N/600 TRACK 14

9070N/900 TRACK 14

9952 N HANGER 7

9952 PAF HANGER 14

9952 S HANGER 15

9958 N HANGER 7

9958 PAF HANGER 14

9958 S HANGER 15

9962 N HANGER 7

9962 PAF HANGER 14

9962 S HANGER 15

9968 N HANGER 7

9968 PAF HANGER 14

9968 S HANGER 15

9972 PAF HANGER 14

9972 S HANGER 15

9978 PAF HANGER 14

9978 S HANGER 15

10500 PAF6 ALU TRACK 7

10510 PAF ORNEMENT. CAP 7



10610 PAF ORNEMENT. CAP 7

20012 RV/3 TRACK 17

20016 M JOINING PIECE 17

20016 RG SET 20

20016 RV/3 TRACK 17

20020 M JOINING PIECE 17

20020 RV/3 TRACK 17

20020 RVX/3 TRACK 21

20021 RG SET 20

20021 RS/3 TRACK 17

20021 RSX/3 TRACK 20

20021 RV/3 TRACK 17

20021 VV/3 TRACK 17

20061 R12 WHEEL 18

20061 V10 WHEEL 18

20061V12 WHEEL 18

20061R16 WHEEL 18

20081 R12 WHEEL 18

20081R16 WHEEL 18

20081 R20 WHEEL 18

20081V12 WHEEL 18

20081 V20 WHEEL 18

20091R12 WHEEL 18

20091R16 WHEEL 18

20091V12 WHEEL 18

20100R20 WHEEL 18

20100V20 WHEEL 18

20100R20X WHEEL 21

20101 R12 WHEEL 18

20101R16 WHEEL 18

20101 R20 WHEEL 18

20101 V12 WHEEL 18

20101 V20 WHEEL 18

20116 RG SET "RAS" 20

20120V20 WHEEL 18

20120R20 WHEEL 18

20120R20X WHEEL 21

20121 R20 WHEEL 18

20121R16 WHEEL 18

20121 RG SET "RAS" 20

20121 V20 WHEEL 18

20140 V20 WHEEL 18

20140 R20 WHEEL 18

20141R16 WHEEL 18

20141 R20 WHEEL 18

20141 V20 WHEEL 18

20160 V20 WHEEL 18

20160 R20 WHEEL 18

20161 R16 WHEEL 18

20161 R20 WHEEL 18

20161 V20 WHEEL 18

20200 V20 WHEEL 18

20200 R20 WHEEL 18

21081 R16 HANGER 19

21081 R20 HANGER 19

21081 V20 HANGER 19

21100 V20 HANGER 19

21100 R20 HANGER 19

21101 R16 HANGER 19

21101 R20 HANGER 19

21101 V20 HANGER 19

22081 R16 HANGER 19

22081 R20 HANGER 19

22081 V20 HANGER 19

22100 V20 HANGER 19

22100 R20 HANGER 19

22100R20X HANGER 21

22101 R16 HANGER 19

22101 R20 HANGER 19

22101 V20 HANGER 19

22120 V20 HANGER 19

22120 R20 HANGER 19

22120R20X HANGER 21

22121 R16 HANGER 19

22121 R20 HANGER 19

22121 V20 HANGER 19

22140 R20 HANGER 19

22140 V20 HANGER 19

22141 R16 HANGER 19

22141 R20 HANGER 19

22141 V20 HANGER 19

23025 GUIDE 24

23030 GUIDE 24

23040 GUIDE 24

23040 B GUIDE 24

23040 L GUIDE 24

23040 X GUIDE 24

25040 S PIVOT 25

25040 BS PIVOT 25

25040 V PIVOT 25

25050 S PIVOT 25

25050BS PIVOT 25

25050 V PIVOT 25

25051 PIVOT 27

25051 B PIVOT 27

25051 H PIVOT 27

25051 X PIVOT 27

25052 PIVOT 27

25052 B PIVOT 27

25052 H PIVOT 27

25060 SO HINGE 25

25071 PIVOT 27

25071 B PIVOT 27

25071 H PIVOT 27

25072 PIVOT 27

25072 B PIVOT 27

25072 H PIVOT 27

25162 HINGE 26

25162 SO HINGE 26

25163 HINGE 26

25163 L HINGE 26

25163 SO HINGE 26

25163 SOL HINGE 26

25182 HINGE 26

25182 SO HINGE 26

25183 HINGE 26

25183 L HINGE 26

25183 SO HINGE 26

25183 SOL HINGE 26

25184 SO HINGE 25

25185 HINGE 26

25202 HINGE 26

25202 SO HINGE 26

25203 HINGE 26

25203 L HINGE 26

25203 SO HINGE 26

25203 SOL HINGE 26

25204 SO HINGE 25

25205 HINGE 26

25222 HINGE 26

25222 SO HINGE 26

25223 HINGE 26

25223 L HINGE 26

25223 SO HINGE 26

25223 SOL HINGE 26

25224 SO HINGE 25

25225 HINGE 26

25242 HINGE 26

25242 SO HINGE 26

25243 HINGE 26

25243 L HINGE 26

25243 SO HINGE 26

25243 SOL HINGE 26

25244 SO HINGE 25

25245 HINGE 26

25310 D DOOR CLOSER 28

25310 G DOOR CLOSER 28

25318 D DOOR CLOSER 28

25318 G DOOR CLOSER 28

0CP20 PILLAR COVER 24









411

GB

/ 09

MANTION S.A.S7 rue Gay Lussac F-25000 BesançonTel. +33 3 81 85 38 73/74 Fax + 33 3 81 53 29 76E-mail : [email protected]

Poarta Culisanta Curte Comat.salaj.ro

Documents

Transcript of Poarta Culisanta Curte Comat.salaj.ro