Pneumatic glue pump with heating - Pneumatikkatalog · 54005200 PTI-D3-O-400 without heating •...
4
32 PUMPS Technical and visual modifications are reserved. Pneumatic glue pump model "2016" PTI-D3-H-400 for thick and thin media Pneumatic glue pump with heating Order No. Type Version Scope of supply 54005000 PTI-D3-H-400 with integrated heating • heating (stainless steel) • hose connector 19 mm stainless steel • air connection with ball valve 1/4" and plug nipple 7.2 NW • electrical cable with three-pin plug, 2 m • operating manual Pneumatic glue pump without heating Order No. Type Version Scope of supply 54005200 PTI-D3-O-400 without heating • hose connector 19 mm stainless steel • air connection with ball valve 1/4" • operating manual In contrast to the global pump version with electrical control, the version without heating is not operated electronically, but is controlled by a pneumatic oscillating valve. The flow rate of the medium is regulated by a valve in the exhaust air. 54005000 IP66 Programming options: • temperature display • temperature setting to 50 °C • change of temperature display from Celsius to Fahrenheit • stroke counting • stroke frequency indication for throttle setting • NFC: Data selection via Android smartphone or tablet • maintenance interval display Google Play and Google Play logo are brands of Google Inc. The Timmer glue pump is a pneumatically driven piston pump with integrated heater and elec- tronic control, which conveys glue in both stroke movements. The stroke frequency (max. 2 hertz) can be displayed on the display. As soon as the pump is started pneumatically, the glue feeding begins via suction and pressure valves. The flow rate of the medium is regulated by a valve in the exhaust air. PTI-D3-H-400 NEW! 2016 NEW! 2016
Transcript of Pneumatic glue pump with heating - Pneumatikkatalog · 54005200 PTI-D3-O-400 without heating •...
32
PUMPS
Technical and visual modifications are reserved.
Pneumatic glue pump model "2016"PTI-D3-H-400 for thick and thin media
Pneumatic glue pump with heating
Order No. Type Version Scope of supply
54005000 PTI-D3-H-400 with integrated heating • heating (stainless steel)
• hose connector 19 mm stainless steel
• air connection with ball valve 1/4" and
plug nipple 7.2 NW
• electrical cable with three-pin plug, 2 m
• operating manual
Pneumatic glue pump without heating
Order No. Type Version Scope of supply
54005200 PTI-D3-O-400 without heating • hose connector 19 mm stainless steel
• air connection with ball valve 1/4"
• operating manual
In contrast to the global pump version with electrical control, the version
without heating is not operated electronically, but is controlled by a pneumatic oscillating valve.
The flow rate of the medium is regulated by a valve in the exhaust air.
54005000
IP66Programming options:
• temperature display
• temperature setting to 50 °C
• change of temperature display from Celsius to Fahrenheit
• stroke counting
• stroke frequency indication for throttle setting
• NFC: Data selection via Android smartphone or tablet
• maintenance interval displayGoogle Play and Google Play logo are
brands of Google Inc.
The Timmer glue pump is a pneumatically driven piston pump with integrated heater and elec-
tronic control, which conveys glue in both stroke movements.
The stroke frequency (max. 2 hertz) can be displayed on the display.
As soon as the pump is started pneumatically, the glue feeding begins via suction and pressure
valves. The flow rate of the medium is regulated by a valve in the exhaust air.
PTI-D3-H-400
NEW!2016
NEW!2016
33
PUMPS
Technical and visual modifications are reserved.
Materials
Housing upper part Plastic material ABS Lower part of the housing Plastic material POMHousing suction nozzle Stainless steelFluid valve balls Stainless steelRiser pipe heating Stainless steelPiston rod Stainless steelHeater Stainless steelDrawbars (2 pcs) Stainless steelSpout (19 mm) Stainless steelHandle Stainless steelSuction and pressure valves O-ring FPM
Electrical data - pump with heating
Electrical connection* 200 - 240 V, 50/60 HzPower consumption approx. 950 W for max. heating powerConnection cable (three-pin plug**) 2 m rubber cordTemperature regulator ElectronicTemperature range adjustable to +50 °CTemperature adjustment via display u. foil keyboard / Timmer appProtection class IP66 (against dust and hose water)SPS interface on request * 110 V version on request ** other plugs available
Pneumatic data
Compressed air connection plug nipple 7.2 NWOperating pressure 3 - 6 bar filtered compressed airCompressed air consumption max. 170 l/min for max. outputdrive - pneumatic with heating 5/2-way valve, electricaldrive - pneumatic without heating pneumatic oscillating valve
Heater
Suction valve
Glue outlet
125 mm
43 mm
738
mm
125
mm
304
mm
83 mm
140 mm
Glue inlet
Pneumatic glue pump model "2016"PTI-D3-H-400 for thick and thin media
PTI-D3-H-400
General data
Drive pneumatic - self-primingSuction height approx. 2 m WS (20 °C)Transmission 3.8 : 1
max. delivery rate with water 33 cm³ per double stroke (4 l/min / 240 l/h for 2 Hz)
medium temperature max. 50 °C — electronically adjustableViscosity – pumped medium max. 100.000 mPa s
law pulsation media flow in suction and in pressure move-ment
suction side - connection suction pipe (standard length 420 mm)pressure side connection spout flange, 19 mmWeight 6.9 kgLifting speed 2 Hz max.
34 Technical and visual modifications are reserved.
PUMPS
The Timmer glue pump in the container version equals the glue pump with heating (54005000), but with an extra-long suction pipe of 1000 mm for con-veying glue from IBC containers.
The glue amount to be set via the integrated glue counter defines the amount of glue to be conveyed.As soon as the pump is started pneumatically, the glue feeding begins via suction and pressure valves.
The flow rate of the medium is regulated by a valve inthe exhaust air. When the set number of strokes is reached, the pump switches to stop.
54005400
Pump connection
Electrical cable
Glue outlet
compressed air connection with plug nipple
Glue inlet
additional compressed air connection
e.g. for maintenance unit
Pneumatic container glue pump with heating
Order No. Type Version Scope of supply
54005400 PTI-D3-H-Cont-400 with integrated heating • pump with integrated heating and
electronic stroke counter
• barrel cover of plastic material
• assembly clamping ring
• conveying hose with fill valve
• bracket for conveying hose
• air connection with ball valve 1/4"
• electrical cable with three-pin plug, 2 m
• operating manual
Container glue pump Model "2016"PTI-D3-H-Cont-400 for thick and thin media
PTI-D3-H-Cont-400
NEW!2016
35Technical and visual modifications are reserved.
PUMPS
Compressed air connection with hose
Pressure regulator ¼“, PVC hose 12/6, mini ball tap with spout 6 ¼“, completely assembled
Order No. Type hose lengthhose øinside
hose øoutside
54000191 PTI-D3-ZUB-compressed air connection-2m 2 m 6 mm 12 mm
54000192 PTI-D3-ZUB-compressed air connection-5m 5 m 6 mm 12 mm
conveying hose PVC
conveying hose PVC, incl. hose clamp
Order No. Type hose lengthhose øinside
hose øoutside
52020073 PTI-D2-ZUB-conveying hose-2M 2 m 19 mm 27 mm
52020068 PTI-D2-ZUB-conveying hose-5M 5 m 19 mm 27 mm
Glue lid for glue pump as a kit
Order No. Type
59010020 PTI-D3-ZUB-glue lid-kitconsisting of: glue lid VA, funnel with bayonet fitting POM, double screen VA
Assembly clamping ring for height adjustment of glue pump D3 series POM
55002010 PTI-D3-ZUB-Assembly clamping ringconsisting of: clamping ring with bayonet fitting POM, screws VA
Europlug (CEE plug)
52020071 PTI-D2-ZUB-CEE-plugCEE plug 3x16 A 220 V with cable sleeve support assembled
Procon plug
52020070 PTI-D2-ZUB-Procon plug Procon plug assembled
Glue lid glue lid for glue pump - stainless steel VA
59010018 PTI-D3-ZUB-glue lid-VA consisting of: glue lid VA
Glue funnel with double screen for glue pump POM
59010019 PTI-D3-glue funnel kit Material funnel: POM, material double screen: VA
59010020
59010018
59010019
55002010
5400019154000192
52020070
52020071
5202007352020068
Accessories (optional) Model "2016"PTI-D3-H-400 / PTI-D3-H-Cont-400
PTI-D3
