PNEUMATIC AUTOMATION - Univer · Pneumatic Gripper Locking Units for rodless cylinders S5 - VL1...
Transcript of PNEUMATIC AUTOMATION - Univer · Pneumatic Gripper Locking Units for rodless cylinders S5 - VL1...
PNEUMATICAUTOMATION
AUTOMOTIVE
MODULARTOOLINGSYSTEM
PRODUCT RANGE
CYLINDERSHIGH-TECHVALVESAIR TREATMENTACCESSORIES
POWER CLAMPSPIN UNITSPIN CLAMPSGRIPPER UNITSPOWER PIVOTSMARKING UNITSELECTRIC UNITS
GR8 TOOLING
1
2
6
8
16
20
22
28
Subject to change
UNIVER S.p.A.Headquarters
20128 Milano - ITALYVia Eraclito, 31Tel. +39 02 25298.1Fax +39 02 [email protected]
In light of technical updates, Univer S.p.A. reservesthe right to modify technical features of itsproducts with no obligation to issue prior notice.
Information contained in the present catalogue ispure indication. For further details about producttechnical features and related parameter values tobe respected for a proper functioning, please referto the datasheets available at:www.univer-group.com
All rights reserved to Univer S.p.A. Unauthorizedreproduction prohibited.
Valves
Cylinders
High-Tech
Air Treatment
Accessories
Power clamps
GR8 Tooling
2 Subject to change
UNITOP Compact Cylinders (RP Ø 16÷63 mm),ISO 21287 (RM Ø 16÷100 mm)
UNITOP Compact Cylinders (RO Ø 16÷63 mm),ISO 21287 (RN Ø 16÷63 mm)Octagonal tube NON-ROTATING
STANDARDS-BASED CYLINDERS
Microcylinders ISO 6432Ø 8÷25 mm
Pneumatic Cylinders ISO 15552Ø 32÷125 mmCLEAN PROFILE
Pneumatic Cylinders ISO 15552Ø 32÷125 mm
STANDARDS-BASED COMPACT CYLINDERS
Oval cylinderØ 18÷80 mm
Short stroke cylindersØ 12÷100 mmTUBE NEW DESIGN
Pneumatic Rotary ActuatorsØ 32÷125 mm
OVAL/SHORT STROKE/ROTARY CYLINDERS
PNEUMATICAUTOMATION
STRONG Compact Cylinders Ø 32÷100 mm
Pneumatic Cylinders ISO 15552Ø 32÷125 mmHEAVY SERIES TUBE
STRONG Compact Cylinders Ø 32÷100 mmOctagonal tube NON-ROTATING
Pneumatic Cylinders ISO 15552Ø 160/200 - Ø 250/320 mm CLEAN PROFILE
Easier to clean
QUICK INSTALLATIONSensors and connections on one side
UNIVER TECHNOLOGYStrong and Reliable
ISO 15552Interchangeability
KL
Double Rack Rotary Table PK/PMStainless Steel
Pneumatic Cylinders
ATEXCertifi ed productsAvailable on request
4 Subject to change
Rodless Cylinders standard versionØ 16÷50 mm
Slide Units for pneumatic cylindersM, KE/K, KD series
Slide Units for compact cylindersRP Ø25 series
GUIDED CYLINDERS
RODLESS CYLINDERS
Guided Compact CylindersBearings (JLS) - Ball bushing (JLV)
Rodless Cylinders with integrated guidesØ 25÷50 mm - Technopolymer sliding guides
Slide Units for rodless cylindersS1 series
Slide Units for STRONG compact cylindersRS series
Version with metallic
piston rod scraper
(Upon request)
ACCESSORIES
Clamping cylinder Magnetic and ElectronicProximity Sensors
Hydraulic Shock Absorbers
PNEUMATICAUTOMATION
CYLINDER ASSEMBLY KITSISO 6432ISO 15552UNITOP/ISO 21287STRONGRODLESS CYLINDERS
Guided Slides
Slide Units for telescopic cylindersRT2 series
Rodless Cylinders with 90° integrated guidesØ 25÷50 mm - Sliding on ball bearings UNIVER Original since 1988
A - B -
Internal strip (seal)External strip (protection)made of reinforced elastomer with Kevlar fi ber
B
A
S1/S5/VL1
ATEXCertifi ed productsAvailable on request
6 Subject to change
LOCKING UNITS
PROGRAMMABLE PNEUMATIC ACTUATORS
PNEUMATIC GRIPPERS
Locking units for cylinders and piston rods
Pneumatic actuator with integrated digital measuring detector and safety locking device
Pneumatic actuator with digital measuring system
Angular and ParallelPneumatic Gripper
Locking Units for rodless cylinders S5 - VL1 series
AngularPneumatic Gripper 180°
ParallelPneumatic Gripperwith Linear Guide
Low Profi le ParallelPneumatic Gripperwith Linear Guide
ORIGINALLocking systemUNIVER Original since 1998
STATIC/DYNAMICStatic locking and dynamic braking in asingle device
POWERFULThe highest locking force among marketequivalent devices
SAFENo rod slipping even if aff ected by oiland grease
PNEUMATICAUTOMATION
TELESCOPIC CYLINDERS
Telescopic cylinders2 stages (RT2 Ø 25÷63 mm) 3 stages (RT3 Ø 40÷63 mm)
Wide-type ParallelPneumatic Gripper
Pneumatic actuator with integrated safety locking device
Self-centering 3 JawPneumatic Gripper
Telescopic Cylinder
2 stages
Telescopic Cylinder
3 stages
ORIGINALUNIVER Original design and technology
INDUSTRIALIZEDIndustrialized components andadvanced technology
REDUCED DIMENSIONS
60% less than standardcylinders
NON-ROTATINGAnti-rotation octagonal tubestandard supplied
RT
ATEXCertifi ed productsAvailable on request
8
NEW 0,5 W
Subject to change
ISO 15218 - 10 mm NanovalvesB11 Standard
B10 Low consumption
B12 High fl ow rate
10 mm Nanovalves ISO 15218 - 15 mm Microvalves
ELECTROPILOTS
STANDARDS-BASED VALVESISO 5599/1 Valves- Mixed and spool system
ISO 15407-1/2 Valves
Size
1-2-3-4
M12
NAMUR Valves
MIXED AND SPOOL SYSTEMVersions with either mixed or spool system available for all series
Low power consumption
MIXEDfor heavy applications
SPOOLfor all applications
M12Connector
PNEUMATICAUTOMATION
ISO 5599/1 Light Series Valves
U1 Miniature Electropilots
18 mm (ISO 02) 26 mm (ISO 01)
U2 Miniature Electropilots
Size
1-2
ISO
01-02
BDBM12 connector(Automotive)
BDEIntegrated electricalconnection(ISO 15407/2)
ISO 15407-1/2 Valves
BDASingle electricalconnection(ISO 15407/1)
Sub-base with
integrated electrical
connection
Magnetic memory
LATCHING
CSA/UL Certifi cationCSA C22.2 N.139-13UL 429/2013
ATEXCertifi ed productsAvailable on request
10 Subject to change
SPOOL VALVES
UNIVERSAL Valves G1/8 - G1/4 COMPA 2 (E series) COMPA 4 (F series) Miniature Valves
20 mm Valves and Solenoid Valves - Threaded body G1/8
Poppet valves G1/82/2 - 3/2
POPPET VALVES
Poppet Valves for compressed air (AF)and for vacuum (AG) G1/8 ÷G1 1/2
Miniature Limit Switches (AI) JET series Pneumatic Switches (AI-JET)Valves with panel operation (AI-JET2)
26 mm Valves and Solenoid Valves - G1/8
PNEUMATICAUTOMATION
20 mm Valves and Solenoid Valves - For sub-base mounting
COMBOBOX Valves
Pneumatic and Solenoid Foot Valves
MIXED Valves G1/8 - G1/4 - G1/2
WIDE RANGE
G1/8 ÷ G1 1/22/2 - 3/2 NC-NO
COMPRESSED AIR VERSION
VACUUM VERSIONAvailable also with external pilot vacuum supply
HIGH FLOW RATE
Up to 35000 Nl/min (G1 1/2)
AF/AG
ATEXCertifi ed productsAvailable on request
12
310Nl/min
800Nl/min
NEW
Nl/min
W
Subject to change
COMPACT VALVES
10 mm - COMPACT Valves - For sub-base mounting 15 mm - COMPACT Valves - For sub-base mounting
Serial communication system
SERIAL SYSTEMS
Serial module for all manifold models
P10 P15 P22 BD18 BD26
up to36 coils
1700Nl/min
PNEUMATICAUTOMATION
NEW
22 mm - COMPACT Valves - For sub-base mountingCOMPACT Valves
P10/P15/P22HIGH FLOW RATE
UNIVER traditional spool technology
COMPACT SIZEHighest reduction of overall dimensions
EASY INSTALLATIONAll pneumatic connections on the same side
COMPLETE SOLUTIONThreaded body and body for sub-basemounting 5/2 - 5/3 - 3/2+3/2
ATEXCertifi ed productsAvailable on request
14
NEWNEW
Subject to change
10 mm COMPACT Valves - M5 15 mm COMPACT Valves - G1/8
In-lineCONNECTOR
In-lineCONNECTOR
External connector External connector
COMPACT VALVES
ESSENTIAL VALVES
18 mm ESSENTIAL Valves - G1/8 22 mm ESSENTIAL Valves - G1/4
Aluminium sub-baseTechnopolymer
modular sub-base 1÷10 positions
Modularsub-base1 place
Leftsupply plate
Rightsupply plate
PNEUMATICAUTOMATION
15 mm COMPACT Valves - G1/8 15 mm COMPACT ValvesFor sub-base mounting
ESSENTIAL Valves
EL18/22HIGH FLOW RATE800 Nl/min (G1/8) 1700 Nl/min (G1/4)
REDUCED DIMENSIONS18 mm (G1/8) 22 mm (G1/4)
COMPLETE SOLUTION5/2 - 5/3 - 3/2+3/2
STRONGMetallic body
SUB-BASE MOUNTINGEasy installation by meansof 2 screws
INDIVIDUAL MOUNTINGSide holes on valve body
UNIVER TRADITIONAL
SPOOL TECHNOLOGYThe dynamic spool guaranteesa long life and reliability
METALLIC MANUAL OVERRIDE
(standard supplied)Impulse and 1-2 positions
INTERCHANGEABLE
U6 COIL12 - 24 V DC24 - 110 - 220 V AC
ATEXCertifi ed productsAvailable on request
16
600Nl/min
2800Nl/min
1500Nl/min
4300Nl/min
FR+L FR+LFR+L FR+LNEW
Subject to change
AIR TREATMENT UNITS
Size 0 Size 05 Size 1 Size 2
Filtersize 0-05-1-2
Regulatorsize 0-05-1-2
Lubricatorsize 0-05-1-2
Filter regulatorsize 0-05-1-2
Gradual startersize 0-05-1-2
Diverter blocksize 0-05-1-2
Lockable valvesize 0-05-1-2
Shut-off valvesize 0-05-1-2
PNEUMATICAUTOMATION
Filter regulator + Lubricatorsize 0-05-1-2
Filter + Regulator + Lubricatorsize 0-05-1-2
Size 1 U05 Size 1 U3 CNOMOSize 0 U05
MODULAR40 mm (HZE0) 50 mm (HZE05)63 mm (HZE1) 80 mm (HZE2)
INTEGRATED GAUGEStandard supplied
COMPLETE SOLUTIONPossibility of assembling combinationscomplete with accessories
HZE
ATEXCertifi ed productsAvailable on request
18
NEW NEW
NEW
NEW
Subject to change
AIR TREATMENT UNITS
Lockable regulatorSize 1-2
Electro-pneumatic transducers
Regulator without gaugeSize 0
Check valve Size 0-1-2
Check valve Size 0-1-2
Electropneumatic Proportional Regulators G1/8 - G1/4 - G1/2
HZE Integrated DigitalPressure Switch
IP65 Digital Pressure Switchwith connector
HZE Coalescing FiltersSize 1 - 2
Digital pressure switch
PNEUMATICAUTOMATION
NEW
NEW
Precision regulators
Microregulator
Filter Regulator with
Digital PressureSwitch
Integrated square pressure gauge Round gauge
Precision regulator G1/4
Mini Regulator G1/4
20 Subject to change
FITTINGS AND TUBES
Technopolymer Push-In Fittings
Push-on Fittings Olive Compression Fittings
Space-saving Fittings Nickel-plated Brass Push-in Fittings
Quick Couplings for Compressed Air
Binary Counter (Flip Flop)
COMPLEMENTARY VALVES AND ACCESSORIES
Flow regulators with metallic body Signal processing valve
Blocking valve Pneumoelectrical transducer Adjustable pressure switchCheck valve
NEW
PNEUMATICAUTOMATION
HEA Polyamide tubesHEC Polyurethane tubesHED Co-polyurethane tubes
Fittings and Accessories with pneumatic functions
Standard fittings
HFA Polyamide Spiral TubesHFC Polyurethane Spiral Tubes
Gradual starter
Adjustable diaphragm pressure switch
G1/8 ÷ G1Fluid Valves
Economizer
Air/Oil reservoirAM4 series
22
NEW
Subject to change
UNIVERSAL Mini clamps
UNIVERSAL Pneumatic power clampswith hand lever
UNIVERSAL Pneumatic power clampswith hand leverinterchangeable with size 50/63 mm
Pneumatic gripper units with hand leverPneumatic gripper units
POWER CLAMPS
UNIVERSAL Pneumatic power clamps UNIVERSAL Pneumatic power clamps interchangeable with size 50/63 mm
UNIVERSAL Pneumatic power clampwith central hand lever
Pneumatic grippers
GRIPPER UNITS
UNIVER Original
Ø25/32
AUTOMOTIVE
AIRSAVING
ATEX
UNIVERSAL Pneumatic power clamps conforming to the N.A.A.M.S.Standard
UNIVERSAL Pneumatic power clamps with 2 arms
UNIVERSAL Pneumatic power clamps with hand lever conforming to the N.A.A.M.S. Standard
Manual power clamps
ALL SIZES AVAILABLE32 - 40 - 50 - 63 - 80 mm
TOGGLE JOINT MECHANISM AND
SPRING PACK SYSTEMSame internal system as standard UNIVER clamps
HIGH AIR SAVING IN EACH SIZE
STANDARD AND NAAMS VERSIONS
UA
DF-RW700Magnetic Field Immune Sensor
Certifi ed productsAvailable on request
24 Subject to change
PIN CLAMPS
Pneumatic pin clamps Pneumatic pin clampshorizontal shape
Pneumatic pin clamps with vanishing hook
Pneumatic retractable locatingpin unit with hand lever andorientable double rod
Pneumatic retractable locatingpin unit with hand lever andsingle rod
Manual retractable locatingpin unit with single rod
RETRACTABLE LOCATING PIN UNITS
Pneumatic retractable locatingpin units with single rod
Pneumatic retractable locatingpin units with single rod,conforming to the CNOMOStandard
Pneumatic retractable locatingpin units with orientabledouble rod and toggle-jointmechanism
Pneumatic retractable locatingpin units with single rod andtoggle-joint mechanism
Pneumatic pin clamps forlaser beam applications
Compact pneumatic retractablepin units with double guide
AUTOMOTIVE
DF-S DF-C
DF-S
Pneumatic pin clamps withvanishing hook and pin
Pneumatic retractable locatingpin unit with hand lever, single rodand toggle-joint mechanism
Pneumatic retractable locatingpin units with orientable double rod
Manual pin clamps
Pneumatic retractable locatingpin unit with hand lever, orientable double rod and toggle-jointmechanism
FULL METALLIC BODY
2 VERSIONS:DF-S M12 adjustable swivel connector(in steps of 10°)DF-C M12 fi xed connector(to minimize overall dimensions)REDUCED OVERALL DIMENSIONS
INTERCHANGEABLE WITH
DF-U SENSOR
DF-S/DF-C
POWER
CLAMPS
POWERPIVOTS
PIN UNITS
WITH SINGLE ROD
GRIPPER
UNITS
MARKING
UNITS
PIN UNITS
WITH TWO RODS
ATEXCertifi ed productsAvailable on request
Compact sensor
26 Subject to change
ELECTRIC UNITS
Electric power clamps Electric power clamps, fi xing conformingto the N.A.A.M.S. Standard
Electric gripper units
POWER PIVOTS
Pneumatic power pivots
TC-EModular Control System for Electric Clamping Units
SERIAL
COMMUNICATION
SYSTEM
POWER UNIT
EFFICIENT power management
ELECTRIC UNIT DRIVERControl module for 2 clamping unitsMax 8 electric devices
FLEXIBLECompatible with I/O modulesand valve manifolds
AUTOMOTIVE
0°120°
MARKING UNITS
Electric retractable locating pin units
Marking unit- 1 character Marking unit- 7 characters
Electric power pivots
LARPUNIVERSAL Power Pivot
ADJUSTABLE
OPENING ANGLE
ATEXCertifi ed productsAvailable on request
28
4530 70
Subject to change
Maximum stiff ness and minimun weight Precise and effi cient system to guarantee a high levelof positional accuracy
GR8 MODULAR TOOLING SYSTEM
Ø 30 - 45 - 70 mm BOOMS LOCKING RING
MODULARTOOLINGSYSTEM
KIT Considerable reductionof mounting elements
Unlimited swivel rotation
HIGH PRECISIONHigh level of positional repeatability;
low defl ection
MODULAR COMPONENTSConsiderable reduction of mounting components
QUICK INSTALLATION AND SET UPNo welding or doweling required,
easily replaceable components
FULLY ADJUSTABLEUnlimited orientation in space and free confi gurations
UNIVER Original
BALL MOUNTING
30
90 Nm
200 Nm
Subject to change
BOOMS AND BOOM ADAPTERS
Octagonal boom Ø45
Joint 30 without base
Joint 45-45
Interlocking end 30for ball mounting
Interlocking key insert
Joint 45 without base
Joint 70-70
Interlocking end 45
Octagonal boom Ø70
Base plate 45
Joint 70-45
Interlocking end 30 D
Octagonal boom Ø30
Base plate 30
Joint 45-30
Interlocking end 30
Boom end-cap Ø30 Boom end-cap Ø45
FRAME COMPONENTS
Coplanar Mount 70-70 Base linear plate 70Base linear plate 45Coplanar Mount 70-45
MODULARTOOLINGSYSTEM
90 Nm
200 Nm
Base plate 70
Interlocking end 45for ball mounting
Boom end-cap Ø70 Locking ring Locking ring D
Interlocking end 45 D
Joint 70 without base
Coplanar Mount 45-30
Base plate
Coplanar Mount 45-45
Max static load
32
200 Nm
200 Nm
90 Nm
90 Nm
90 Nm
90 Nm
90 Nm
200 Nm
90 Nm
90 Nm
90 Nm
200 Nm
Subject to change
JOINT
45 mm base connector
Double cross joint 30for ball mounting
Round Joint 30for ball mounting
Cross Joint 45for ball mounting
Cross Joint 30
Double cross joint 45
Round Joint 45
Cross Joint 70
70 mm base connector
Double cross joint 30 D
Round Joint 30 D
Cross Joint 45 D
30 mm base connector
Double cross joint 30
Round Joint 30
Cross Joint 45
Round Joint 70for ball mounting
Adapter octagon 30to round 25
Round Joint 70 DRound Joint 70
MODULARTOOLINGSYSTEM
200 Nm
200 Nm
200 Nm
200 Nm
90 Nm
200 Nm
Cross Joint 30for ball mounting
Double cross joint 45for ball mounting
Cross Joint 70for ball mounting
Cross Joint 30 D
Cross Joint 70 D
Double cross joint 45 D
Round Joint 45for ball mounting
Adapter octagon 45to round 40
Round Joint 45 D
Max static load
34
90 Nm
200 Nm
200 Nm
90 Nm
90 Nm
200 Nm
90 Nm
Subject to change
ANGLE ADAPTERS
BALL ADAPTERS
Orientable angle 45° for ball mounting
Proximity mount 18 mm
Orientable angle 45° D
Proximity mount 30 mm
Orientable angle 45°
Proximity mount 12 mm
Orientable angle 90°
Vacuum cup adapter
Edge mount orientable side for 30 mm boom D
Edge mounting 30-45
45° mounting element for 30 mm boom D
45° mounting element for 30 mm boom
Edge mounting 45-45
Edge mount orientable side for 30 mm boom
Edge mounting 30-30
MODULARTOOLINGSYSTEM
90 Nm
200 Nm
200 Nm
90 Nm
200 Nm
Orientable angle 90° for ball mounting
Ball mount 30
Orientable angle 90° D
Ball mount 45
Edge mount orientable side for 45 mm boom
Edge mount orientable side for 45 mm boom D
Max static load
36 Subject to change
FRONT MOUNT PLATES
REAR MOUNT PLATES
Interlocking adapter for GR8MF40A and GR8MFGL
Front mount plate D for clamps size 50/63
Rear mount plate Dfor clamps size 40
Rear mount plate with M8 threads
Mount platefor GR8MF40A and GR8MFGL
Mount plate for GR8MF50D
Rear mount plate for LCP50
Flange mount for LCP
Front mount platefor clamps size 40
Mount plate for GR8MF40D and GR8MFGL
Rear mount platefor clamps size 40
Rear mount plate
Mount fl ange angle for GR8MF40A and GR8MF40D
Mount fl ange angle for GR8MF50D
Rear mount plate D for LCP50
Flange mount for LCP with M8 threads
MODULARTOOLINGSYSTEM
Front mount plate D for clamps size 40
Interlocking adapter for GR8MF40D, GR8MF50D andGR8MFGLD
Front mount plate for UGP40VL
Rear mount plate with M8 threadsfor clamps size 50/63
Front mount plate Dfor UGP40VL
Counter mountfor GR8MFGL andGR8MFGLD
Rear mount plate D with M8 threadsfor clamps size 50/63
38 Subject to change
LGPS ADAPTERS
RISERS
Orbital mount 360°,ball Ø30 mm for LGPS32
Orbital mount 360°,ball Ø45 mm for LGPS40
Riser size 45
Middle fl ange mount for LGPS32
Rear fl ange mount 70 mm for LGPS32
Riser size 70
Orbital mount 360°,ball Ø25 mm for LGPS32
Riser size 30
Middle fl ange mount for LGPS40
Rear fl ange mount 80 mm for LGPS40
Orbital mount 360°,ball Ø25 mm for LGPS40
MODULARTOOLINGSYSTEM
Orbital mount 360°,ball Ø40 mm for LGPS40
Rear fl ange mount 110 mm for LGPS40
Orbital mount 360°,ball Ø30 mm for LGPS40
40 Subject to change
Compliance with International
Standards
DIRECTIVE 2014/34 EU “ATEX” Directive that specifi es the safetyrequirements for equipment/components for use in potentially explosive atmospheres
DIRECTIVE “REACH” EC 1907/2006 of the European Parliament and the Council concerning the Registration,Evaluation, Authorisation and Restriction ofChemicals.
DIRECTIVE 97/23/EC “PED” Directive which applies to the design,manufacture and conformity assessment of pressure equipment and assemblies with a maximum allowable pressure greater than 0.5 bar.
ISO 9001:2015
“QUALITY MANAGEMENT SYSTEM”
Standard specifying Quality Management System requirements.
For further information contact our Sales Offi ce or visit our website www.univer-group.com
DIRECTIVE 2006/42/EC “MACHINERY” Directive defi ning essential health and safety requirements for the design, construction,installation and maintenance of machinery.
DIRECTIVE 2011/65/EU “RoHS” Directive which regulates the use anddisposal of hazardous substances in electrical and electronic equipment and their wastedisposal.
PRODUCT CERTIFICATION “CSA/UL”
Nr. 24 48884Nr. LR 113373-1
Product Safety certifi cation for the North American market (Unite States - Canada)
DIRECTIVE 2012/19/EU “WEEE” Directive on waste electrical and electronic equipment.
www.univer-group.com
PR-100_EN - 0908 rev.10-1117Univer S.p.A. reserves the right to modify technical features of its products with no obligation to issue prior notice
UNIVER S.p.A.
20128 Milano
Via Eraclito, 31 Tel. +39 02 25298.1 Fax +39 02 [email protected]
20128 Milano
Via Empedocle, 20 Tel. +39 02 25298.1 Fax +39 02 [email protected] PIEMONTE/LIGURIA/VALLE D’AOSTA
10071 Borgaro Torinese Torino
Via Veneto, 18 Tel. +39 011 4501871 Fax +39 011 [email protected]
VENETO/FRIULI VENEZIA-GIULIA
TRENTINO-ALTO ADIGE
30030 Vigonovo Venezia
Via Prima strada 16/A - Loc. GaltaTel. +39 049 9834140Fax +39 049 [email protected]
40069 Zola Predosa Bologna
Via Balzani, 5Tel. +39 051 753907Fax +39 051 [email protected]
EMILIA ROMAGNA
CENTRO/SUD
40069 Zola Predosa Bologna
Via Balzani, 5Tel. +39 051 753907Fax +39 051 [email protected]
20128 Milano
Via Empedocle, 20 Tel. +39 02 25298.1 Fax +39 02 [email protected]
LOMBARDIA
Distributors worldwide:
Get in touch with UNIVER Sales Departmentor visit our website www.univer-group.com
Headquarters
Branch Offi cesUNIVER SERVICE S.r.l.Headquarters
UNIVER DO BRASIL Ltda
BRAZIL - 13474-764Americana São Paulo
Rua do Polyester, 29Distrito Industrial Abdo NajarTel. +55 19 3113-9400Fax +55 19 [email protected]
UNIVER CHINA
CHINA - Shanghai399 Fu Te North Road,Free Zone, [email protected]
UNIVER FRANCE S.a.s.
FRANCE - 68000Colmar
1, rue Denis PapinTel. +33 3 89210900Fax +33 3 [email protected]
UNIVER G.m.b.H.
GERMANY - D-65428Rüsselsheim
Eisenstraße 51Tel. +49 6142 408320Fax +49 6142 [email protected]
UNIVER NORTH AMERICA
USA - 48312Sterling Heights - Michigan
6620 Cobb DriveTel. +1 248 299 0525Fax +1 248 299 [email protected]
UNIVER S.L.
SPAIN - 08210Barbera Del Valles Barcelona
Ronda Industria, 26 - 28Tel. +34 93 7297360Fax +34 93 [email protected]
UNIVER POLSKA Sp. z o.o.
POLAND - 25-663Kielce
ul. K. Olszewskiego 21ETel. +48 41 278 72 53Fax +48 41 278 72 [email protected]