Pneumatic atomizing nozzlesnozzle range. Criteria for selecting pneu-matic atomizing nozzles 1....
Transcript of Pneumatic atomizing nozzlesnozzle range. Criteria for selecting pneu-matic atomizing nozzles 1....
Atomization of viscous liquidsCoolingGas coolingHumidification of airHumidification of goodsLubricationWeb dampeningand many others...
Pneumatic
atomizing
nozzles
1.2
Pneumatic atomizing nozzles
Pneumatic atomizing nozzlesare available in various de -signs to comply with specificspray and flow requirements:
n self-aspiration (siphon prin-ciple)
n supply of liquid from a ves-sel located at a higher level (gravity principle)
n supply of liquid underpressure (pressure prin -ciple)
n mixing of fluids inside oroutside the nozzle
n full cone or flat fan spraypattern
For many applications, ad -justability of liquid flow and,thereby, of the droplet size, ispossible with the aid ofmanually operated accessorycomponents.A pneumatically controlledpiston (series 136) ormagnetic valve (series 166)allows to perform automatic orintermittent opera tions.A number of special custom -ized designs complete thenozzle range.
Criteria for selecting pneu -matic atomizing nozzles
1. Spray pattern
Pneumatic flat fan atomizingnozzles should be chosen forhumidifying and cooling ofgoods, for web dampeningand for a number of paintingtasks; in short, wherever abroad linear impact is requi-red. Pneumatic full cone atomizing nozzles, however,should be used, when a com-pact, circular impact or amajor reach is required, e.g.for direct air humidifying, forgas cooling or for chemicalprocess applications.
2. Mode of liquid supply
Whenever liquid can be sup-plied under pressure, it isrecommended to use nozzlesfunctioning by the liquid pressure principle. Use ofpneumatic atomizing nozzlesopera ting to the siphon or thegravity principle is recom-mended when liquid is to besprayed in small quantities,e.g. for spraying of disinfect -ants.
3. Mixing of fluids
The supply of air or gas provi-des an additional breaking upof the liquid flow into finestdrop particles. This supplyand mixing can either takeplace inside or outside thenozzle. Inside mixing shouldbe preferred, when water, lowviscosity liquids or liquidswithout solid matter are to beatomized. Outside mixing isparticularly suited for atom -izing viscous liquids which areprone to impurities and there-fore tend to cause clogging ofthe nozzle. Low liquid pres -sures are used with this typeof nozzle due to its design.
We can also supply completemodular nozzle lances onrequest. We would be happy to sendyou detailed product informa-tion.
Siphon principle Liquid pressure principle
Gravity principle Pressure principle with pneumaticallycontrolled valve (example)
Air
Liquid
Air
Liquid
Liquid
Liquid
mm H2O
mm H2O
Control air forpneumatic valve
1.3
Pneumatic atomizing nozzles
Series 136
Spray Mode of Mixing Series V Water Application Pagepattern liquid of fluids [l/h]
supply<)
.
1.13
1.15
1.9
0.10 – 76.10 Web dampening,humidification ofgoods, cooling.
45°60°80°
Flatfan
Pressureprinciple
Inside
0.80 – 3.20 Web dampening,humidification ofgoods, cooling.
60°Flatfan
Siphon orgravityprinciple
Inside
1.70.40 – 93.20 Humidification of air, cooling.
20°Fullcone
Pressureprinciple
Inside
0.40 – 132.90 Humidification of air, cooling.
60°Fullcone
Pressureprinciple
Inside
1.100.30 – 66.70 Chemical industry,cooling, spraying ofviscous liquids.
20°Fullcone
Siphon orgravityprinciple
Out side
136.4
136.5
136.1
136.2
136.3
1.4
Pneumatic atomizing nozzles
Series 136
Spray Mode of Mixing Series V Water Application Pagepattern liquid of fluids [l/h]
supply<)
.
1.17136.6 1.70 – 102.10 Web dampening,humidification ofgoods, atomizationof viscous fluids.
45°60°
Flat fan
Pressureprinciple
Out side
1.5
Pneumatic atomizing nozzles
Series 166
Spray Mode of Mixing Series V Water Application Pagepattern liquid of fluids [l/h]
supply<)
.
1.24
1.23
0.10 – 76.10 Web dampening,humidification ofgoods, cooling.Version withmagnetic valve.
45°60°80°
Flat fan
Pressureprinciple
Inside
1.210.40 – 93.20 Humidification of air, cooling.Version withmagnetic valve.
20°Fullcone
Pressureprinciple
Inside
0.40 – 132.90 Humidification of air, cooling.Version withmagnetic valve.
60°Fullcone
Pressureprinciple
Inside
166.4
166.1
166.2
1.26166.6 1.70 – 102.10 Web dampening,humidification ofgoods, atomizationof viscous fluids.Version withmagnetic valve.
45°60°
Flat fan
Pressureprinciple
Out side
1.6
Pneumatic atomizing nozzles
Spray Mode of Mixing Series V Water Application Pagepattern liquid of fluids [l/h]
supply<)
.
1.30
On request.
Auf Anfrage.
140 4.50 – 12.00 Lubrication,cooling,humidification of air.
20°– 30°Fullcone
Siphon orgravityprinciple
Inside
170 8.50 – 290.00[l/min]
Gas cooling, flue gas desulphurisation,exhaust gas condi-tioning, dust control.
15°Fullcone
Pressureprinciple
Inside
150 0,15 – 63,00[l/min]
Chemische Verfah-renstechnik, Küh-lung, Zerstäubungviskoser Medien.
20°– 30°Voll -kegel-strahl
Druck-prinzip
außen On request.150 0.15 – 63.00[l/min]
Chemical processengineering, coo-ling, atomizing ofviscous liquids.
20°– 30°Fullcone
Pressureprinciple
Out side
1.31176ViscoMist™
7.80 – 307.00[l/h]
Coating processes,moistening, lubrica-tion, glazing, disin-fection,
variableSolidstream
Fullcone
Flat fan
Pressureprinciple
Out side
1.7
Fine full cone atomizationand fogging with air or gas.Liquid pressure principle.Internal mixing of fluids. Applications: Humidification of air, cooling.
Pneumatic atomizing nozzles, Full cone, pressure principle, internal mixingSeries 136.1
39,6 mm10 mm10 mm
Hex 11
35,8
mm
1/4
BS
PP
1/4
BS
PP19
,3 m
m
Ø 4
2 m
m
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 115. xx. A2 + 1Y = 136. 115. 1Y. A2
E = narrowest free cross section (water) Continued on next page.
1.7
Series 136.1
Locking plug
Liquid Shut-Off /Clean-Out Needle
Liquid Shut-Off /Clean-Out Needle
Pneumaticallycontrolled valve
Seal-ing
Nozzle body
Nozzle tip
Lockring
Accessories for series 136 please refer to page 1.28
<)
300
150
D2
D1
Series 136.1
136. 115. xx. A2 0.50
0.400.801.20
-----
5.903.801.70
-----
0.300.600.90
-----
1.401.802.202.60
----
5.804.102.201.20
----
0.801.001.401.70
----
2.402.803.203.604.004.404.805.20
9.107.505.904.402.902.001.100.40
1.101.201.501.802.102.502.803.00
3.003.403.804.204.605.005.405.80
11.009.608.206.805.504.102.902.10
1.201.401.601.902.202.502.803.10
0.701.502.003.004.00
6060605555
10095
10095
100l l
136. 125. xx. A2 0.50
0.801.201.602.002.402.803.203.604.004.404.80
--
4.704.404.003.503.002.702.001.601.301.000.60
--
1.501.902.302.603.003.203.704.104.504.905.20
--
1.201.602.002.402.803.203.604.004.404.805.205.606.00
7.006.606.205.805.404.904.403.903.503.102.702.301.90
1.802.202.603.003.403.704.104.504.805.205.605.906.30
2.803.203.604.004.404.805.205.606.00
----
9.108.708.408.007.707.307.006.606.20
----
3.303.704.104.504.805.205.605.906.30
----
3.403.804.204.605.005.405.80
------
10.6010.309.909.609.308.908.60
------
3.904.304.605.005.405.806.10
------
1.402.202.803.404.20
0.701.502.003.004.00
5555556060
9095
100100100
l l
Ordering no.
Type Mat. no.
316L
SS
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . .pA
ir[b
ar]
<)
Spray angle
20°
Weight brass: 200 g
D2[mm]
D1[mm]
0.801.802.603.204.40
1.8
Pneumatic atomizing nozzles,Full cone, pressure principle, internal mixingSeries 136.1
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 134. xx. A2 + 1Y = 136. 134. 1Y. A2
E = narrowest free cross section (water)
136. 134. xx. A2 0.7
1.201.602.002.402.803.203.604.004.404.805.205.606.00
13.2012.4011.8011.4011.1010.8010.6010.4010.109.909.509.008.50
2.703.303.904.404.905.506.006.507.007.608.108.609.20
2.002.402.803.203.604.004.404.805.205.606.00
--
19.4018.1017.3016.7016.1015.6015.2015.0014.6014.1013.80
--
3.904.404.905.506.006.507.007.608.108.609.10
--
3.003.403.804.204.605.005.405.80
-----
28.3027.5026.7025.9025.0024.2023.6023.10
-----
5.205.706.306.807.307.808.408.90
-----
3.804.204.605.005.405.80
-------
32.6032.0031.3030.6029.9029.30
-------
6.206.807.307.808.408.90
-------
1.802.803.805.206.00
0.701.502.003.004.00
5560606565
95105105110110
l l
136. 142. xx. A2 2.5
1.401.802.202.603.003.403.804.204.605.005.405.80
24.2020.4020.0019.3017.6016.5017.0016.3015.1014.0013.1012.40
5.106.307.208.209.30
10.4011.4012.4013.3014.3015.3016.20
1.602.002.402.803.203.604.004.404.805.205.606.00
53.4042.6035.3030.4028.6028.2027.3025.9024.3022.3021.8021.40
4.705.907.208.409.50
10.5011.5012.5013.5014.6015.7016.70
3.203.604.004.404.805.205.606.00
----
70.8062.5055.7049.3044.6041.9040.4039.70
----
8.009.20
10.6011.7012.9014.1015.1016.10
----
3.804.204.605.005.405.80
------
93.2083.1075.3069.0063.4057.50
------
9.2010.1011.3012.5013.7014.90
------
0.801.603.004.006.00
0.701.502.003.004.00
6065606565
100105105110110
l l
Ordering no.
Type Mat. no.
316L
SS
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir
[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . .pA
ir[b
ar]
<)
Spray angle
20°
D2[mm]
D1[mm]
1.9
Locking plug
Liquid Shut-Off /Clean-Out Needle
Liquid Shut-Off /Clean-Out Needle
Pneumaticallycontrolled valve
Seal-ing
Nozzle body
Nozzle tip
Lockring
Pneumatic atomizing nozzles,Full cone, pressure principle, internal mixingSeries 136.2
Fine full cone atomizationand fogging with air or gas.Especially wide spray angleof 60°. Pressure principle. Internal mixing of fluids. Applications: Humidification of air, cooling.
39,6 mm10 mm 10 mm
Hex 11
35,8
mm
1/4
BS
PP
1/4
BS
PP19
,3 m
m
Ø 4
2 m
m
E = narrowest free cross section (water)
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 215. xx. A2 + 1Y = 136. 215. 1Y. A2
Weight brass: 200 g
Accessories for series 136 please refer to page 1.28
300
D2D1
150
Series 136.2
Series 136.2
60°
136. 215. xx. A2 0.5
1.602.002.402.80
---
5.106.207.208.10
---
25.6017.8011.306.90
---
2.603.003.403.804.204.60
-
44.2033.0024.7018.1013.209.30
-
7.008.209.20
10.2011.2012.00
-
3.604.004.404.805.205.606.00
93.7078.3065.8054.9045.6038.0036.10
7.909.30
10.6011.9013.0014.1014.40
4.204.605.005.405.806.00
-
132.90117.20101.1087.9076.6071.20
-
7.309.00
10.4011.8013.2013.80
-
0.801.00
-------
2.804.30
-------
17.506.00
-------
1.601.802.002.20
-----
25.9014.706.701.90
-----
4.005.306.708.10
-----
3.003.203.403.603.804.00
---
40.4031.5022.2014.608.504.50
---
5.806.908.209.50
11.0012.30
---
3.804.004.204.404.604.805.005.205.40
54.9045.6037.6029.6021.6015.309.706.002.90
6.407.308.509.70
11.2012.4013.8015.2016.50
1.001.201.40
----
1.301.501.80
----
3.001.800.70
----
1.601.802.002.202.402.60
-
5.804.903.802.801.700.80
-
1.701.902.102.302.502.80
-
2.803.203.604.004.404.805.00
8.507.205.704.002.200.800.40
2.402.803.203.604.104.504.60
3.804.204.605.005.405.806.00
9.408.206.905.403.802.301.40
3.103.503.904.204.705.205.60
1.001.602.403.204.20
0.801.602.303.204.20
2.002.602.403.604.20
0.701.502.003.004.00
0.701.502.003.004.00
0.701.502.003.004.00
200230230245250
250245245250245
235245255255265
330380385390410
450465465465465
380415420425430
l l
136. 222. xx. A2 1.0
1.4
l l
136. 231. xx. A2 l l
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d
<)
D1[mm]
D2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . . .pA
ir[b
ar]
1.10
Locking plug
Liquid Shut-Off /Clean-Out Needle
Liquid Shut-Off /Clean-Out Needle
Pneumaticallycontrolled valve
Seal-ing
Nozzle body
Nozzle tip
Lockring
Particularly fine full coneatomization with air or gas.Siphon principle or gravityprinciple. External mixing of fluids. Applications: Chemical industry, cooling,atomization of viscous liquids.
Pneumatic atomizing nozzles,Full cone, siphon principle, external mixingSeries 136.3
39,6 mm10 mm 10 mmHex 11
31,3
mm
1/4
BS
PP
1/4
BS
PP19
,3 m
m
Ø 4
2 m
m
E = narrowest free cross section (water) Continued on next page.
Operational information:Liquid flow of pneumatic atomizing nozzles with external mixingcan be turned down to 0 with air pressure remaining constant.
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 316. xx. A2 + 1Y = 136. 316. 1Y. A2
Weight brass: 200 g
<)
300
150
D2
D1
Series 136.3
Series 136.3
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Water V [l/h] Spray dimensions
351Y
Bra
ss p
late
d
20°
<)
0.4
0.60.8
1.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00
0.700.901.101.201.401.601.801.902.102.202.402.602.802.903.103.203.403.603.80
-1.291.471.501.621.681.741.801.921.952.072.132.222.252.252.252.132.071.98
1.381.441.621.681.801.861.921.982.072.102.192.252.372.402.342.312.252.192.10
1.321.381.531.621.711.771.861.891.951.982.102.162.282.342.282.222.162.101.95
--
1.021.141.261.321.441.501.591.651.801.831.951.981.921.891.801.741.56
--
0.840.961.111.171.321.321.441.501.651.711.801.891.861.831.681.651.50
---
0.660.900.961.141.201.291.351.501.591.681.771.771.711.561.441.26
------
0.510.630.840.961.141.231.381.441.501.411.050.72
-
--------
0.390.480.720.811.081.141.140.840.30
--
1.403.204.806.00
150
Vn
[m3/h]
p
[bar] 450300 100 200 300 600 900
300300300300
60608070
110120135120
.
Water column[mm H2O]
Aspiration height[mm H2O]
.
Air
136. 316. xx. A2 ll
pAir
[bar]
Aspira-tion-
height[mmWS]
D1[mm]
D2[mm]
Accessories forSeries 136 please refer to page 1.28
1.11
Pneumatic atomizing nozzles,Full cone, siphon principle, external mixingSeries 136.3
20°
0.7
0.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00
0.901.101.201.501.601.801.902.102.202.402.602.802.903.103.203.403.503.80
-------
5.435.555.826.036.306.366.276.125.825.675.31
-----------
6.666.726.576.426.125.975.58
------------
7.056.846.756.486.306.00
2.493.123.363.753.964.294.414.714.805.075.225.645.885.975.885.495.224.80
1.712.532.783.223.393.733.914.184.314.564.725.155.385.475.365.034.844.48
-1.862.222.672.853.213.393.753.904.204.384.714.925.225.104.714.534.08
----
0.661.411.682.072.252.612.883.213.603.934.053.813.631.92
----------
2.102.852.971.93
----
1.203.204.806.00
300300300300
60657080
115125135135
ll136. 324. xx. A2
0.7
0.600.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00
1.201.401.802.002.302.502.803.003.403.503.904.004.404.604.905.105.405.605.90
----
5.195.435.796.006.306.426.756.877.297.628.378.528.348.197.86
-----
5.976.276.486.756.907.177.327.808.168.858.858.648.498.16
-----
6.426.726.907.147.297.597.808.348.739.219.158.888.768.43
2.192.643.393.694.204.474.864.985.375.525.826.036.396.697.327.717.717.597.26
-2.283.003.333.874.084.534.685.075.195.555.736.096.396.997.327.537.417.05
-1.442.733.063.513.784.204.414.714.895.195.375.796.096.697.057.297.206.84
--
0.781.112.162.583.303.573.874.024.294.474.835.135.766.066.486.456.15
-----
0.841.441.772.312.523.423.814.174.384.865.195.675.735.64
0.803.204.806.00
300300300300
65657075
120115115120
ll136. 334. xx. A2
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Water V [l/h] Spray dimensions
351Y
Bra
ss p
late
d<)
150
Vn
[m3/h]
p
[bar] 450300 100 200 300 600 900
.
Water column[mm H2O]
Aspiration height[mm H2O]
.
Air
1.11
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 324. xx. A2 + 1Y = 136. 324. 1Y. A2
E = narrowest free cross section (water) Continued on next page.
pAir
[bar]
Aspira-tion-
height[mmWS]
D1[mm]
D2[mm]
1.12
20°
1.5
1.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00
3.604.204.505.205.506.106.407.007.308.008.308.909.209.80
10.1010.80
--
11.9712.1812.2712.2712.3012.4212.5413.1713.5313.9814.0413.7413.3512.21
----
13.3213.2313.1713.2013.2613.8314.1314.5214.5214.3114.0412.90
-----
14.1614.0714.0714.1014.4914.7315.1515.1514.9414.64
-
8.829.459.75
10.2610.4710.6510.7411.0111.2812.1212.4812.9913.0512.6612.2710.98
-8.498.919.519.75
10.0510.2310.5310.8611.7612.1512.6312.6612.2411.8210.50
-7.5
7.958.739.039.429.63
10.0510.4411.4011.7612.1812.3011.7911.3710.17
3.935.225.766.757.147.748.138.859.30
10.4110.8011.1911.1610.6210.088.70
-3.394.055.195.586.396.817.868.469.69
10.0810.2910.119.218.527.05
1.803.004.206.00
300300300300
70707070
120120120120
ll136. 342. xx. A2
2.5
3.203.603.804.204.404.805.005.405.606.00
11.5012.5013.1014.2014.8015.9016.5017.6018.1019.20
-------
61.1260.9359.89
-----
63.3963.7564.1763.8762.88
------
66.6966.7266.4865.43
-45.7347.8151.6153.1055.3056.0556.7156.6655.69
38.9241.9445.1449.0750.8753.4054.1555.0455.0453.98
--
42.2946.4648.3051.2652.1853.1753.2252.11
-33.1735.3639.5841.5945.0646.2947.6247.6845.78
---
29.9431.5934.6835.8837.8338.4337.05
3.804.605.406.00
300300300300
9595
10095
135145150150
ll136. 351. xx. A2
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Water V [l/h] Spray dimensions
351Y
Bra
ss p
late
d<)
150
Vn
[m3/h]
p
[bar] 450300 100 200 300 600 900
.
Water column[mm H2O]
Aspiration height[mm H2O]
.
Air
Pneumatic atomizing nozzles,Full cone, siphon principle, external mixingSeries 136.3
E = narrowest free cross section (water)
pAir
[bar]
Aspirati-on-
height[mmWS]
D1[mm]
D2[mm]
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 342. xx. A2 + 1Y = 136. 342. 1Y. A2
1.13
136. 443. xx. A2 1.0
1.201.401.601.80
-------
1.501.701.902.10
-------
13.9011.909.507.80
-------
1.601.802.002.202.402.602.803.003.203.403.60
26.6024.3022.0019.9018.0016.2014.4012.8011.309.908.80
1.601.802.002.202.402.602.803.003.203.403.60
3.003.403.804.204.605.005.405.806.00
--
37.1033.1029.5026.2023.0020.2017.6014.9014.10
--
2.603.003.403.804.204.604.905.305.50
--
3.604.004.404.805.205.606.00
----
45.6041.9038.3035.0031.8029.0026.20
----
2.903.303.704.004.504.905.20
----
1.202.002.803.804.80
0.701.502.003.004.00
110115145150160
165190190210230
l l
E = narrowest free cross section (water)
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 414. xx. A2 + 1Y = 136. 414. 1Y. A2
45°
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d
<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . . .pA
ir[b
ar]
Locking plug
Liquid Shut-Off /Clean-Out Needle
Liquid Shut-Off /Clean-Out Needle
Pneumaticallycontrolled valve
Seal-ing
Nozzle body
Nozzle tip
Lockring
Particularly fine flat fan atomization with air or gas.Pressure principle. Internal mixing of fluids. Applications: Web dampening, cooling,humidification of goods.
Pneumatic atomizing nozzles, Flat fan, pressure principle, internal mixingSeries 136.4
39,6 mm10 mm 10 mmHex 11
39,8
mm
1/4
BS
PP
19,3
mm
1/4
BS
PP
Ø 4
2 m
m
Weight brass: 200 g
Accessories for series 136 please refer to page 1.28
300150
B2
B1
Series 136.4
Series 136.4
136. 414. xx. A2 0.7
1.001.201.401.601.80
------
1.301.501.701.902.10
------
7.706.004.202.701.30
------
1.401.601.802.002.202.402.602.803.003.203.40
14.3013.0011.6010.208.907.405.904.603.202.101.10
1.501.601.802.002.202.402.602.803.003.203.40
2.202.603.003.403.804.204.605.005.405.806.00
22.4020.0017.7015.5013.3011.008.806.604.302.501.60
2.002.302.603.003.403.704.104.504.905.305.50
3.003.403.804.204.605.005.405.806.00
--
25.1023.0020.9018.9016.9014.9012.8010.809.80
--
2.502.803.103.503.804.204.605.005.20
--
1.402.403.203.804.60
0.701.502.003.004.00
85100105120130
125145155170210
l l
Continued on next page.
1.14
136. 425. xx. A2 0.5
0801.201.602.002.402.803.00
------
1.201.601.902.302.602.903.10
------
6.505.504.704.003.202.602.20
------
1.401.802.202.603.003.403.804.004.404.805.205.606.00
9.408.707.907.206.405.705.104.804.203.602.802.201.60
1.702.102.402.703.103.403.703.904.204.504.805.105.50
2.402.603.003.403.804.204.605.005.405.806.00
--
13.2012.9012.3011.8011.1010.409.809.208.608.107.80
--
2.502.703.003.403.704.004.304.605.005.305.40
--
2.402.803.203.604.004.404.805.205.606.00
---
16.1015.5015.0014.5013.9013.4012.8012.2011.7011.20
---
2.502.903.203.503.804.104.504.805.105.40
---
1.202.203.003.405.60
0.701.502.003.004.00
155165170200200
195255265330330
l l
136. 462. xx. A2 1.5
1.201.602.002.402.803.203.604.004.40
---
2.603.404.104.805.406.006.607.207.80
---
19.0012.209.407.105.705.003.603.202.20
---
2.002.402.803.203.604.004.404.805.205.605.80
-
22.0018.0014.4011.308.808.106.204.603.201.600.80
-
2.002.402.803.203.603.904.304.604.905.305.40
-
3.003.403.804.204.605.005.405.806.00
---
61.8051.9044.6039.0033.4029.4025.5022.0020.60
---
4.004.805.806.607.408.108.909.609.90
---
3.804.004.204.404.604.805.005.205.405.605.806.00
76.1070.4065.6061.3057.3054.1051.3049.3046.5043.7041.3039.00
4.605.105.505.906.406.707.207.708.208.608.909.30
1.202.403.203.806.00
0.701.502.003.004.00
120120120140145
140170175205205
l l
136. 452. xx. A2 1.5
1.001.401.802.202.602.80
--
3.905.707.008.409.80
10.30--
18.808.607.404.101.000.10
--
1.802.002.202.402.602.80
--
31.0025.4020.1015.5012.4010.40
--
5.306.307.208.008.909.60
--
3.203.604.004.404.805.205.606.00
50.1039.5031.3024.0017.7013.4010.608.60
7.709.40
11.2012.9014.5016.0017.5018.80
3.804.204.605.005.405.806.00
-
70.7058.6048.6041.2033.6027.5024.40
-
8.209.60
11.2013.1014.8016.4017.20
-
1.001.802.603.605.00
0.701.502.003.004.00
130150155175180
185240245280285l l
136. 433. xx. A2 0.4
1.001.201.401.60
---
2.002.402.803.20
---
11.608.105.303.70
---
1.802.002.202.402.602.803.00
18.3015.3012.209.807.605.904.40
2.803.203.604.004.304.705.00
3.003.403.804.204.605.005.40
31.0025.4020.6016.3012.509.306.50
3.704.405.105.906.607.308.00
3.804.204.605.005.405.806.00
37.5032.4027.7023.4019.4015.9014.20
4.405.005.706.507.207.908.30
1.402.203.003.805.20
0.701.502.004.004.00
150185205300260
210255300485395
l l
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . . .pA
ir[b
ar]
E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 136. 462. xx. A2 + 1Y = 136. 462. 1Y. A2
Pneumatic atomizing nozzles,Flat fan, pressure principle, internal mixingSeries 136.4
45°
60°
80°
1.15
Locking plug
Liquid Shut-Off /Clean-Out Needle
Liquid Shut-Off /Clean-Out Needle
Pneumaticallycontrolled valve
Seal-ing
Nozzle body
Nozzle tip
Lockring
Particularly fine flat fan atomization with air or gas.Siphon principle or gravityprinciple. Internal mixing of fluids. Applications: Web dampening, cooling,humidification of goods.
Pneumatic atomizing nozzles,Flat fan, siphon principle, internal mixingSeries 136.5
39,6 mm
10 mm 10 mmHex 11
39,2
mm
1/4
BS
PP
1/4
BS
PP
19,3
mm
Ø 4
2 m
m
Weight brass: 200 g
Accessories for series 136 please refer to page 1.28
300150
B2
B1
Series 136.5
Series 136.5
60°
0.4
0.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00
1.802.202.502.903.103.503.704.204.404.805.005.505.706.106.306.807.007.40
-1.891.951.981.951.891.831.741.711.741.921.981.952.012.102.312.312.22
-2.132.162.222.192.252.252.011.921.831.802.042.042.042.132.342.282.22
-2.192.252.342.312.252.252.222.162.102.102.192.192.162.222.282.252.22
1.621.801.861.891.891.831.741.711.651.801.861.921.892.012.192.252.192.10
1.531.771.801.861.801.711.711.621.621.771.861.831.862.012.192.222.162.10
-1.681.681.771.681.681.591.561.591.741.801.831.802.042.162.162.102.04
1.171.411.471.531.501.471.441.441.591.681.711.681.742.042.102.042.011.92
0.881.161.211.261.261.221.181.281.381.471.491.701.771.981.931.861.801.79
1.003.004.606.00
300300300300
130150170180
165200225240
ll136. 516. xx. A2
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Water V [l/h] Spray dimensions
351Y
Bra
ss p
late
d
<)
150
Vn
[m3/h]
p
[bar] 450300 100 200 300 600 900
Water column[mm H2O]
Aspiration height[mm H2O]
.
Air
E = narrowest free cross section (water)
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 516. xx. A2 + 1Y = 136. 516. 1Y. A2
Continued on next page.
pAir
[bar]
Aspira-tion-
height[mmWS]
Spraywidth
B1[mm]
Spraywidth
B2[mm]
Operational information:Liquid flow of pneumatic atomizing nozzles with external mixingcan be turned down to 0 with air pressure remaining constant.
.
1.16
0.5
0.600.801.201.401.802.002.402.603.003.203.603.804.204.404.805.005.405.606.00
1.601.902.302.603.003.303.703.904.404.605.105.305.706.006.406.607.107.307.80
--
2.752.842.962.942.872.822.592.482.372.342.352.302.252.202.522.502.57
--
2.842.903.013.022.972.862.712.512.312.372.352.322.242.212.232.452.61
---
3.053.163.163.103.042.852.712.512.522.432.442.412.372.362.582.76
2.002.212.532.632.782.732.592.492.232.092.252.222.202.202.122.092.602.572.37
-2.102.392.512.642.692.502.462.111.962.182.232.132.072.032.032.552.542.40
-1.982.332.422.562.582.382.292.041.912.192.152.112.052.081.982.492.392.18
--
2.042.142.202.182.011.911.731.741.981.991.941.961.902.252.262.161.94
--
1.691.821.881.821.681.621.721.871.901.851.821.832.122.272.082.021.80
1.003.004.606.00
300300300300
155200215250
240295325400
ll136. 525. xx. A2
Pneumatic atomizing nozzles,Flat fan, siphon principle, internal mixingSeries 136.5
E = narrowest free cross section (water)
60°
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Water V [l/h] Spray dimensions
351Y
Bra
ss p
late
d<)
150
Vn
[m3/h]
p
[bar] 450300 100 200 300 600 900
.
Water column[mm H2O]
Aspiration height[mm H2O]
.
Air
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 525. xx. A2 + 1Y = 136. 525. 1Y. A2
pAir
[bar]
Aspira-tion-
height[mmWS]
B1[mm]
B2[mm]
1.17
Locking plug
Liquid Shut-Off /Clean-Out Needle
Liquid Shut-Off /Clean-Out Needle
Pneumaticallycontrolled valve
Seal-ing
Nozzle body
Nozzle tip
Lockring
Fine flat fan atomizationwith the aid of air or gas.Liquid pressure principle.External mixing of fluids. Applications: Web dampening, cooling,humidification of goods, atomization of viscous liquids.
Pneumatic atomizing nozzles, Flat fan, pressure principle, external mixingSeries 136.6
39,6 mm
10 mm 10 mmHex 11
31,3
mm
1/4
BS
PP
1/4
BS
PP
19,3
mm
Ø 4
2 m
m
Continued on next page.
Weight brass: 200 g
300150
B2
B1
Accessories for series 136 please refer to page 1.28
Series 136.6
Series 136.6
45°
136. 616. xx. A2 0.4
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.503.103.704.304.905.506.106.707.307.908.509.109.60
10.20
1.681.801.922.102.072.192.192.222.222.222.222.222.222.22
0.801.001.401.802.202.603.003.604.004.404.805.205.606.00
2.432.462.582.612.762.732.732.762.762.762.762.762.762.73
2.402.903.604.204.805.406.006.707.307.908.509.109.70
10.20
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.423.483.513.633.633.633.633.663.693.693.693.663.663.66
2.503.103.704.304.905.506.106.707.307.908.409.109.60
10.20
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
3.693.813.873.843.903.933.903.933.963.933.933.933.873.87
2.803.404.004.605.205.806.407.007.608.208.809.40
10.0010.20
1.402.203.204.005.00
0.070.150.200.300.35
80909095
100
115130135145145
l l
859595
100100
120130135140145
136. 635. xx. A2 0.5
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.503.103.704.304.905.506.106.707.307.908.409.009.60
10.20
2.372.612.853.033.123.153.213.183.213.213.213.213.123.18
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.453.543.663.723.903.873.963.963.963.963.963.963.903.84
2.403.103.704.304.905.506.106.707.207.908.409.009.60
10.20
0.801.201.602.102.402.803.203.604.004.404.805.205.606.00
4.805.105.015.105.135.165.225.255.225.225.225.225.225.16
2.403.103.704.304.905.506.106.707.307.908.409.009.60
10.20
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
5.345.375.465.465.585.585.585.585.585.585.585.585.585.58
2.803.404.004.605.205.806.407.007.608.108.709.309.90
10.20
1.402.203.204.005.00
0.070.150.200.300.35
l l
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d
<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.07 0.15 0.30 0.35
. . . . . . . . .pA
ir[b
ar]
1.18
Pneumatic atomizing nozzles, Flat fan, pressure principle, external mixingSeries 136.6
136. 645. xx. A2 0.5
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.803.504.204.905.606.207.007.608.309.009.70
10.4011.0011.70
2.732.823.093.273.363.393.453.483.513.543.573.573.603.60
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.693.873.994.114.174.204.264.294.324.354.384.354.354.38
2.803.504.204.905.606.307.007.608.309.009.70
10.4011.1011.70
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
5.165.315.375.375.435.495.495.555.555.585.555.615.615.61
3.203.904.605.205.906.607.208.008.609.30
10.0010.7011.4011.80
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
5.555.645.675.765.825.825.885.885.885.945.945.945.945.97
3.103.904.605.205.906.607.308.008.709.30
10.1010.7011.4011.80
1.602.403.204.005.20
0.070.150.200.300.35
100110115125130
140150155160165
l l
. . . . . . . . .
859090
100105
135140140145150
136. 626. xx. A2 0.4
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.803.604.304.905.606.307.007.608.409.009.70
10.4011.2011.80
1.831.982.102.162.252.342.312.342.402.402.402.432.432.43
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.492.582.702.822.852.882.882.882.942.912.972.972.972.97
2.803.504.204.905.606.307.007.708.409.009.70
10.4011.1011.80
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.483.603.663.693.693.723.783.783.813.813.813.813.813.81
2.803.504.304.905.606.307.007.608.309.009.70
10.4011.1011.80
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.783.873.903.963.964.023.994.024.054.024.084.054.054.05
2.803.604.204.905.606.307.007.708.309.009.70
10.4011.0011.80
1.602.403.204.005.20
0.070.150.200.300.35
l l
95100105105105
135150160160160
136. 654. xx. A2 0.7
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.403.103.704.304.905.506.106.607.207.808.409.009.60
10.20
5.255.645.796.186.246.276.396.426.456.426.306.246.095.85
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
7.297.447.627.867.928.048.138.138.138.078.047.867.837.59
2.403.103.704.304.905.506.106.707.207.808.409.009.60
10.20
1.201.602.002.402.803.203.604.004.404.805.205.606.00
-
10.1110.2310.3810.4710.5910.5910.6210.6210.6210.5910.5610.5010.35
-
3.103.704.304.905.506.106.707.207.808.409.009.60
10.20-
1.602.002.402.803.203.604.004.404.805.205.606.00
--
11.0711.2211.2811.3111.4311.4611.4311.3711.3711.3411.2211.16
--
3.704.304.905.506.106.607.207.808.409.009.60
10.10--
1.402.203.204.005.00
0.070.150.200.300.35
l l
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.07 0.15 0.30 0.35
pA
ir[b
ar]
E = narrowest free cross section (water)
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 654 xx. A2 + 1Y = 136. 654. 1Y. A2
Continued on next page.
45°
60°
1.19
. . . . . . . . .
136. 673. xx. A2 1.0
0.601.001.401.802.202.603.003.403.804.204.605.005.405.806.00
5.607.609.40
11.0012.6014.2018.9017.4019.1020.8022.4024.0025.6027.2028.10
13.8914.2814.2814.1013.6813.6213.2912.8712.5712.1811.7910.9510.449.578.97
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
-
18.5118.5118.3317.9117.3716.6515.9315.0614.5813.8313.0812.3011.5211.04
-
7.609.30
11.0012.7014.2015.9017.3019.0020.8022.3024.0025.6027.2028.10
-
1.602.002.402.803.203.604.004.404.805.205.605.806.00
--
24.8124.6624.4223.5222.4721.3020.1018.7817.5216.7115.6315.1214.76
--
10.2011.7013.3015.1016.6018.4019.8021.5023.2024.8026.4027.3028.00
--
2.002.402.803.203.604.004.404.805.205.606.00
----
26.6126.3125.6524.5723.2821.9320.3419.2018.0617.0115.87
----
11.8013.5015.1016.6018.3019.9021.5023.1024.7026.3028.00
----
1.602.403.204.005.20
0.070.150.200.300.35
115120120120120
160160160165170
l l
136. 682. xx. A2 1.5
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
7.509.30
11.0012.5014.2015.9017.5019.1020.7022.3023.9025.5027.2028.00
22.4120.1918.7517.8817.1016.4716.0815.9015.9015.8115.2113.9212.0911.07
1.401.802.202.603.003.403.804.204.605.005.405.806.00
-
28.9526.0723.9422.2321.1220.1019.4418.9918.4518.1817.2515.7214.91
-
9.3010.9012.5014.3015.9017.5019.1020.7022.3024.0025.4027.2028.00
1.802.202.603.003.403.804.204.605.005.405.806.00
--
41.2234.9233.1830.4528.2926.6425.3524.2423.1322.1421.1220.67
--
11.1012.6014.2015.9017.5019.1020.7022.3024.0025.5027.2028.00
--
2.002.402.803.203.604.004.404.805.205.606.00
---
44.0439.0935.1632.2230.1828.3226.9425.5924.3623.2822.17
---
11.8013.4015.1016.7018.3019.9021.5023.1024.8026.4028.00
---
1.602.403.204.005.20
0.070.150.200.300.35
110120120120120
155155160165175
l l
136. 664. xx. A2 0.7
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.803.504.204.905.606.306.907.608.309.009.70
10.4011.1011.80
5.465.916.156.426.636.756.936.997.057.117.117.177.117.20
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
7.687.958.138.348.468.588.678.738.768.828.828.828.858.85
3.203.904.605.305.906.607.308.008.709.30
10.1010.7011.4011.80
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
10.5010.7110.8311.0111.0711.1611.1911.2511.2811.3411.3711.3711.4011.40
3.203.904.605.305.906.607.308.008.609.40
10.0010.7011.4011.70
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
11.2811.5211.5811.7011.7911.8811.9412.0012.0312.0612.0612.0912.1212.15
3.203.904.505.205.906.607.308.008.709.40
10.1010.7011.4011.80
1.602.403.204.005.20
0.070.150.200.300.35
110130140150155
140160170180200
l l
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Spray dimensions
351Y
Bra
ss p
late
d<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.07 0.15 0.30 0.35
pA
ir[b
ar]
Pneumatic atomizing nozzles,Flat fan, pressure principle, external mixingSeries 136.6
E = narrowest free cross section (water)
Example Type + Material no. (xx) = Ordering no.for ordering: 136. 664 xx. A2 + 1Y = 136. 664. 1Y. A2
Continued on next page.
60°
Liquid pressure p [bar]
1.20
A1
A2
A3
1
2
A1
A2
A3
1
2
Liquid supply line
Control air for pneumatic valve
Atomizing air supply line
Pneumatically controlled valveOrdering no. 015. 601. xx. xx (see Page 1.28)
Pneumatic atomizing nozzleOrdering no. 136. 6xx. xx. xx
Cereal dampening in a mixing drum
136. 691. xx. A2 2.5
1.401.802.202.603.003.403.804.204.605.005.405.60
13.8016.3018.8021.3023.7026.1028.6031.0033.4035.8038.3039.40
52.0050.0048.6047.5046.5045.4044.4042.9041.5039.9038.9038.50
2.002.402.803.203.604.004.404.805.205.606.00
-
67.3064.6062.0060.4058.0056.2054.2052.4049.9048.1046.40
-
17.5020.1022.5024.9027.3029.8032.1034.7037.1039.5042.00
-
2.603.003.403.804.204.605.005.405.806.00
--
92.3087.7084.3080.7077.0074.4071.1068.1064.3063.20
--
21.2023.6026.0028.5030.9033.4035.9038.3040.8042.00
--
2.603.003.403.804.204.605.005.405.806.00
--
102.1097.2092.5088.4085.2081.3078.2074.3071.1068.90
--
21.2023.7026.1028.5031.0033.4035.8038.2040.7041.90
--
1.602.403.204.005.20
0.070.150.200.300.35
150160160160150
200205205210210
l l
Ordering no.
Type Mat. no.
316L
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
351Y
Bra
ss p
late
d<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.07 0.15 0.30 0.35
pA
ir[b
ar]
Pneumatic atomizing nozzles,Flat fan, pressure principle, external mixingSeries 136.6
E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 136. 691 xx. A2 + 1Y = 136. 691. 1Y. A2
60°
Operational information:Liquid flow of pneumatic atomizing nozz-les with external mixing can be turneddown to 0 with air pressure remainingconstant.
1.21
Pneumatic atomizing nozzles, Full cone, pressure principle, internal mixingSeries 166.1
Example Type + Material no. (xx) = Ordering no.for ordering: 166. 115. xx. A2 + 16 = 166. 115. 16. A2
E = narrowest free cross section (water) Continued on next page.
<)
300
150
D2
D1
Series 166.1
166. 115. xx. A2 0.50
0.400.801.20
-----
5.903.801.70
-----
0.300.600.90
-----
1.401.802.202.60
----
5.804.102.201.20
----
0.801.001.401.70
----
2.402.803.203.604.004.404.805.20
9.107.505.904.402.902.001.100.40
1.101.201.501.802.102.502.803.00
3.003.403.804.204.605.005.405.80
11.009.608.206.805.504.102.902.10
1.201.401.601.902.202.502.803.10
0.701.502.003.004.00
6060605555
10095
10095
100l
166. 125. xx. A2 0.50
0.801.201.602.002.402.803.203.604.004.404.80
--
4.704.404.003.503.002.702.001.601.301.000.60
--
1.501.902.302.603.003.203.704.104.504.905.20
--
1.201.602.002.402.803.203.604.004.404.805.205.606.00
7.006.606.205.805.404.904.403.903.503.102.702.301.90
1.802.202.603.003.403.704.104.504.805.205.605.906.30
2.803.203.604.004.404.805.205.606.00
----
9.108.708.408.007.707.307.006.606.20
----
3.303.704.104.504.805.205.605.906.30
----
3.403.804.204.605.005.405.80
------
10.6010.309.909.609.308.908.60
------
3.904.304.605.005.405.806.10
------
1.402.202.803.404.20
0.701.502.003.004.00
5555556060
9095
100100100
l
Ordering no.
Type Mat.no.
303
SS
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
16
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir
[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . .pA
ir[b
ar]
<)
Spray angle
20°
D2[mm]
D1[mm]
0.801.802.603.204.40
Version with magnetic valve.Fine full cone atomizationand fogging with air or gas.Liquid pressure principle.Internal mixing of fluids. Applications: Humidification of air, cooling.
Technical Data:n Service pressure: 0-6 barn Voltage: 24 V DCn Power: 8 W n Switching frequency:
ca. 500/minn Protective system: IP 67n Ambient temperature:
10°C / +50°Cn Cable length: 1.000 mmn Material of gasket: EPDM
Accessories for series 166please refer to page 1.29
77
22 15
3,5 1/4
BS
PP
37
M4
6 de
ep
1/4 BSPP
WaterAir
Weight brass: 200 gSeries 166.1
1.22
Pneumatic atomizing nozzles, Full cone, pressure principle, internal mixingSeries 166.1
Example Type + Material no. (xx) = Ordering no.for ordering: 166. 134. xx. A2 + 16 = 166. 134. 16. A2
E = narrowest free cross section (water)
166. 134. xx. A2 0.7
1.201.602.002.402.803.203.604.004.404.805.205.606.00
13.2012.4011.8011.4011.1010.8010.6010.4010.109.909.509.008.50
2.703.303.904.404.905.506.006.507.007.608.108.609.20
2.002.402.803.203.604.004.404.805.205.606.00
--
19.4018.1017.3016.7016.1015.6015.2015.0014.6014.1013.80
--
3.904.404.905.506.006.507.007.608.108.609.10
--
3.003.403.804.204.605.005.405.80
-----
28.3027.5026.7025.9025.0024.2023.6023.10
-----
5.205.706.306.807.307.808.408.90
-----
3.804.204.605.005.405.80
-------
32.6032.0031.3030.6029.9029.30
-------
6.206.807.307.808.408.90
-------
1.802.803.805.206.00
0.701.502.003.004.00
5560606565
95105105110110
l
166. 142. xx. A2 2.5
1.401.802.202.603.003.403.804.204.605.005.405.80
24.2020.4020.0019.3017.6016.5017.0016.3015.1014.0013.1012.40
5.106.307.208.209.30
10.4011.4012.4013.3014.3015.3016.20
1.602.002.402.803.203.604.004.404.805.205.606.00
53.4042.6035.3030.4028.6028.2027.3025.9024.3022.3021.8021.40
4.705.907.208.409.50
10.5011.5012.5013.5014.6015.7016.70
3.203.604.004.404.805.205.606.00
----
70.8062.5055.7049.3044.6041.9040.4039.70
----
8.009.20
10.6011.7012.9014.1015.1016.10
----
3.804.204.605.005.405.80
------
93.2083.1075.3069.0063.4057.50
------
9.2010.1011.3012.5013.7014.90
------
0.801.603.004.006.00
0.701.502.003.004.00
6065606565
100105105110110
l
Ordering no.
Type Mat.no.
303
SS
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
16
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir
[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . .pA
ir[b
ar]
<)
Spray angle
20°
D2[mm]
D1[mm]
1.23
Pneumatic atomizing nozzles, Full cone, pressure principle, internal mixingSeries 166.2
Version with magnetic valve.Fine full cone atomizationand fogging with air or gas.Especially wide spray angleof 60°. Pressure principle. Internal mixing of fluids. Applications: Humidification of air. cooling.
Technical Datas:n Service pressure: 0-6 barn Voltage: 24 V DCn Power: 8 W n Switching frequency:
ca. 500/minn Protective System: IP 67n Ambient temperature:
10°C / +50°Cn Material of gasket: EPDM
Accessories for series 166please refer to page 1.29
E = narrowest free cross section (water)
Example Type + Material no. (xx) = Ordering no.for ordering: 166. 215. xx. A2 + 16 = 166. 215. 16. A2
300
D2D1
150
Series 166.2
Series 166.2
60°
166. 215. xx. A2 0.5
1.602.002.402.80
---
5.106.207.208.10
---
25.6017.8011.306.90
---
2.603.003.403.804.204.60
-
44.2033.0024.7018.1013.209.30
-
7.008.209.20
10.2011.2012.00
-
3.604.004.404.805.205.606.00
93.7078.3065.8054.9045.6038.0036.10
7.909.30
10.6011.9013.0014.1014.40
4.204.605.005.405.806.00
-
132.90117.20101.1087.9076.6071.20
-
7.309.00
10.4011.8013.2013.80
-
0.801.00
-------
2.804.30
-------
17.506.00
-------
1.601.802.002.20
-----
25.9014.706.701.90
-----
4.005.306.708.10
-----
3.003.203.403.603.804.00
---
40.4031.5022.2014.608.504.50
---
5.806.908.209.50
11.0012.30
---
3.804.004.204.404.604.805.005.205.40
54.9045.6037.6029.6021.6015.309.706.002.90
6.407.308.509.70
11.2012.4013.8015.2016.50
1.001.201.40
----
1.301.501.80
----
3.001.800.70
----
1.601.802.002.202.402.60
-
5.804.903.802.801.700.80
-
1.701.902.102.302.502.80
-
2.803.203.604.004.404.805.00
8.507.205.704.002.200.800.40
2.402.803.203.604.104.504.60
3.804.204.605.005.405.806.00
9.408.206.905.403.802.301.40
3.103.503.904.204.705.205.60
1.001.602.403.204.20
0.801.602.303.204.20
2.002.602.403.604.20
0.701.502.003.004.00
0.701.502.003.004.00
0.701.502.003.004.00
200230230245250
250245245250245
235245255255265
330380385390410
450465465465465
380415420425430
l
166. 222. xx. A2 1.0
1.4
l
166. 231. xx. A2 l
Ordering no.
Type Mat.no.
303
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
16
<)
D1[mm]
D2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . . .pA
ir[b
ar]
77
22 15
3,5 1/4
BS
PP
WaterAir
37
M4
6 de
ep
1/4 BSPP
1.24
E = narrowest free cross section (water)
Example Type + Material no. (xx) = Ordering no.for ordering: 166. 414. xx. A2 + 16 = 166. 414. 16. A2
Version with magnetic valve.Particularly fine flat fan ato-mization with air or gas.Siphon principle. Internalmixing of fluids. Applications: Web dampening, cooling,humidification of goods.
Technical Data:n Service pressure: 0-6 barn Voltage: 24 V DCn Power: 8 W n Switching frequency:
ca. 500/minn Protective system: IP 67n Ambient temperature:
10°C / +50°Cn Cable length: 1.000 mmn Material of gasket: EPDM
Accessories for series 166please refer to page 1.29
Pneumatic atomizing nozzles,Flat fan, pressure principle, internal mixingSeries 166.4
300150
B2
B1
Series 166.4
Series 166.4
Continued on next page.
22 15
3,5 1/4
BS
PP
WaterAir
37
M4
6 de
ep
1/4 BSPP
81
166. 462. xx. A2 1.5
1.201.602.002.402.803.203.604.004.40
---
2.603.404.104.805.406.006.607.207.80
---
19.0012.209.407.105.705.003.603.202.20
---
2.002.402.803.203.604.004.404.805.205.605.80
-
22.0018.0014.4011.308.808.106.204.603.201.600.80
-
2.002.402.803.203.603.904.304.604.905.305.40
-
3.003.403.804.204.605.005.405.806.00
---
61.8051.9044.6039.0033.4029.4025.5022.0020.60
---
4.004.805.806.607.408.108.909.609.90
---
3.804.004.204.404.604.805.005.205.405.605.806.00
76.1070.4065.6061.3057.3054.1051.3049.3046.5043.7041.3039.00
4.605.105.505.906.406.707.207.708.208.608.909.30
1.202.403.203.806.00
0.701.502.003.004.00
120120120140145
140170175205205
l
45°
Ordering no.
Type Mat.no.
303
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
16
<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . . .pA
ir[b
ar]
166. 414. xx. A2 0.7
1.001.201.401.601.80
------
1.301.501.701.902.10
------
7.706.004.202.701.30
------
1.401.601.802.002.202.402.602.803.003.203.40
14.3013.0011.6010.208.907.405.904.603.202.101.10
1.501.601.802.002.202.402.602.803.003.203.40
2.202.603.003.403.804.204.605.005.405.806.00
22.4020.0017.7015.5013.3011.008.806.604.302.501.60
2.002.302.603.003.403.704.104.504.905.305.50
3.003.403.804.204.605.005.405.806.00
--
25.1023.0020.9018.9016.9014.9012.8010.809.80
--
2.502.803.103.503.804.204.605.005.20
--
1.402.403.203.804.60
0.701.502.003.004.00
85100105120130
125145155170210
l
1.25
Pneumatic atomizing nozzles,Flat fan, pressure principle, internal mixingSeries 166.4
166. 425. xx. A2 0.5
0801.201.602.002.402.803.00
------
1.201.601.902.302.602.903.10
------
6.505.504.704.003.202.602.20
------
1.401.802.202.603.003.403.804.004.404.805.205.606.00
9.408.707.907.206.405.705.104.804.203.602.802.201.60
1.702.102.402.703.103.403.703.904.204.504.805.105.50
2.402.603.003.403.804.204.605.005.405.806.00
--
13.2012.9012.3011.8011.1010.409.809.208.608.107.80
--
2.502.703.003.403.704.004.304.605.005.305.40
--
2.402.803.203.604.004.404.805.205.606.00
---
16.1015.5015.0014.5013.9013.4012.8012.2011.7011.20
---
2.502.903.203.503.804.104.504.805.105.40
---
1.202.203.003.405.60
0.701.502.003.004.00
155165170200200
195255265330330
l
166. 452. xx. A2 1.5
1.001.401.802.202.602.80
--
3.905.707.008.409.80
10.30--
18.808.607.404.101.000.10
--
1.802.002.202.402.602.80
--
31.0025.4020.1015.5012.4010.40
--
5.306.307.208.008.909.60
--
3.203.604.004.404.805.205.606.00
50.1039.5031.3024.0017.7013.4010.608.60
7.709.40
11.2012.9014.5016.0017.5018.80
3.804.204.605.005.405.806.00
-
70.7058.6048.6041.2033.6027.5024.40
-
8.209.60
11.2013.1014.8016.4017.20
-
1.001.802.603.605.00
0.701.502.003.004.00
130150155175180
185240245280285l
166. 433. xx. A2 0.4
1.001.201.401.60
---
2.002.402.803.20
---
11.608.105.303.70
---
1.802.002.202.402.602.803.00
18.3015.3012.209.807.605.904.40
2.803.203.604.004.304.705.00
3.003.403.804.204.605.005.40
31.0025.4020.6016.3012.509.306.50
3.704.405.105.906.607.308.00
3.804.204.605.005.405.806.00
37.5032.4027.7023.4019.4015.9014.20
4.405.005.706.507.207.908.30
1.402.203.003.805.20
0.701.502.004.004.00
150185205300260
210255300485395
l
Ordering no.
Type Mat.no.
303
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
16
<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.7 1.5 3.0 4.0
. . . . . . . . .pA
ir[b
ar]
E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 166. 425. xx. A2 + 16 = 166. 425. 16. A2
60°
80°
1.26
Version with magnetic valve.Fine flat fan atomizationwith the aid of air or gas.Liquid pressure principle.External mixing of fluids. Applications: Web dampening, cooling,humidification of goods, atomization of viscous liquids.
Technical Data:n Service pressure: 0-6 barn Voltage: 24 V DCn Power: 8 W n Switching frequency:
ca. 500/minn Protective system: IP 67n Ambient temperature:
10°C / +50°Cn Cable length: 1.000 mmn Material of gasket: EPDM
Accessories for series 166please refer to page 1.29
Pneumatic atomizing nozzles,Flat fan, pressure principle, external mixingSeries 166.6
300150
B2
B1
Series 166.6
Series 166.6
22 15
73 3,5
1/4 BSPP
WaterAir
37
1/4
BS
PP
M4
6 de
ep
Continued on next page.
45°
166. 616. xx. A2 0.4
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.503.103.704.304.905.506.106.707.307.908.509.109.60
10.20
1.681.801.922.102.072.192.192.222.222.222.222.222.222.22
0.801.001.401.802.202.603.003.604.004.404.805.205.606.00
2.432.462.582.612.762.732.732.762.762.762.762.762.762.73
2.402.903.604.204.805.406.006.707.307.908.509.109.70
10.20
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.423.483.513.633.633.633.633.663.693.693.693.663.663.66
2.503.103.704.304.905.506.106.707.307.908.409.109.60
10.20
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
3.693.813.873.843.903.933.903.933.963.933.933.933.873.87
2.803.404.004.605.205.806.407.007.608.208.809.40
10.0010.20
1.402.203.204.005.00
0.070.150.200.300.35
80909095
100
115130135145145
l
95100105105105
135150160160160
166. 654. xx. A2 0.7
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.403.103.704.304.905.506.106.607.207.808.409.009.60
10.20
5.255.645.796.186.246.276.396.426.456.426.306.246.095.85
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
7.297.447.627.867.928.048.138.138.138.078.047.867.837.59
2.403.103.704.304.905.506.106.707.207.808.409.009.60
10.20
1.201.602.002.402.803.203.604.004.404.805.205.606.00
-
10.1110.2310.3810.4710.5910.5910.6210.6210.6210.5910.5610.5010.35
-
3.103.704.304.905.506.106.707.207.808.409.009.60
10.20-
1.602.002.402.803.203.604.004.404.805.205.606.00
--
11.0711.2211.2811.3111.4311.4611.4311.3711.3711.3411.2211.16
--
3.704.304.905.506.106.607.207.808.409.009.60
10.10--
1.402.203.204.005.00
0.070.150.200.300.35
l
Ordering no.
Type Mat.-no.
303
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
16
<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.07 0.15 0.30 0.35
. . . . . . . . .pA
ir[b
ar]
1.27
Pneumatic atomizing nozzles, Flat fan, pressure principle, external mixingSeries 166.6
. . . . . . . . .
859090
100105
135140140145150
166. 626. xx. A2 0.4
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.803.604.304.905.606.307.007.608.409.009.70
10.4011.2011.80
1.831.982.102.162.252.342.312.342.402.402.402.432.432.43
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
2.492.582.702.822.852.882.882.882.942.912.972.972.972.97
2.803.504.204.905.606.307.007.708.409.009.70
10.4011.1011.80
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.483.603.663.693.693.723.783.783.813.813.813.813.813.81
2.803.504.304.905.606.307.007.608.309.009.70
10.4011.1011.80
0.801.201.602.002.402.803.203.604.004.404.805.205.606.00
3.783.873.903.963.964.023.994.024.054.024.084.054.054.05
2.803.604.204.905.606.307.007.708.309.009.70
10.4011.0011.80
1.602.403.204.005.20
0.070.150.200.300.35
l
Ordering no.
Type Mat.-no.
303
SS
Spray angle
EØ
[mm]
Liquid pressure p [bar] Spray dimensions
16
<)
B1[mm]
B2[mm]p
Air
[bar
]
pA
ir[b
ar]
pA
ir[b
ar]
pA
ir[b
ar]
pW
ater
[bar
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
VW
ater
[l / h
]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
Vn
Air
[m3
/ h]
0.07 0.15 0.30 0.35
pA
ir[b
ar]
E = narrowest free cross section (water)Example Type + Material no. (xx) = Ordering no.for ordering: 166. 654. xx. A2 + 16 = 166. 654. 16. A2
60°
166. 682. xx. A2 1.5
1.001.401.802.202.603.003.403.804.204.605.005.405.806.00
7.509.30
11.0012.5014.2015.9017.5019.1020.7022.3023.9025.5027.2028.00
22.4120.1918.7517.8817.1016.4716.0815.9015.9015.8115.2113.9212.0911.07
1.401.802.202.603.003.403.804.204.605.005.405.806.00
-
28.9526.0723.9422.2321.1220.1019.4418.9918.4518.1817.2515.7214.91
-
9.3010.9012.5014.3015.9017.5019.1020.7022.3024.0025.4027.2028.00
1.802.202.603.003.403.804.204.605.005.405.806.00
--
41.2234.9233.1830.4528.2926.6425.3524.2423.1322.1421.1220.67
--
11.1012.6014.2015.9017.5019.1020.7022.3024.0025.5027.2028.00
--
2.002.402.803.203.604.004.404.805.205.606.00
---
44.0439.0935.1632.2230.1828.3226.9425.5924.3623.2822.17
---
11.8013.4015.1016.7018.3019.9021.5023.1024.8026.4028.00
---
1.602.403.204.005.20
0.070.150.200.300.35
110120120120120
155155160165175
l
166. 691. xx. A2 2.5
1.401.802.202.603.003.403.804.204.605.005.405.60
13.8016.3018.8021.3023.7026.1028.6031.0033.4035.8038.3039.40
52.0050.0048.6047.5046.5045.4044.4042.9041.5039.9038.9038.50
2.002.402.803.203.604.004.404.805.205.606.00
-
67.3064.6062.0060.4058.0056.2054.2052.4049.9048.1046.40
-
17.5020.1022.5024.9027.3029.8032.1034.7037.1039.5042.00
-
2.603.003.403.804.204.605.005.405.806.00
--
92.3087.7084.3080.7077.0074.4071.1068.1064.3063.20
--
21.2023.6026.0028.5030.9033.4035.9038.3040.8042.00
--
2.603.003.403.804.204.605.005.405.806.00
--
102.1097.2092.5088.4085.2081.3078.2074.3071.1068.90
--
21.2023.7026.1028.5031.0033.4035.8038.2040.7041.90
--
1.602.403.204.005.20
0.070.150.200.300.35
150160160160150
200205205210210
l
Accessories for pneumatic atomizing nozzlesSeries 136.1 - 136.6
1.28Example Type + Material no. (xx) = Ordering no.for ordering: 013. 601. xx. 10 + 16 = 013. 601. 16. 10
Quick-cleaning device
6268
D
SW 18
UNF 5/16”-24
Pneumatically controlled valve.Opening pressure 2.1 bar, max. 180 cycles/min.
46
31
Air connection
1/8 NPT
UNF 5/16”-24D
Regulating device and shutting-off needle:
42,533,5*
UNF 5/16”-24
UNEF 9/1”-24
SW 11/16 AF
* max. geöffneter Zustand
SW 18
Regulating device with quick-cleaning needle
6268
D
SW 18
UNF 5/16”-24
Weight brass: 51 g
Weight brass: 120 g
Weight 303 SS: 33 g
Weight brass: 75 g
Ordering no.
For nozzlesType Mat. no.
303
SS
3516
Bra
ss
plat
ed
013. 601. xx. 20013. 602. xx. 20013. 603. xx. 20013. 604. xx. 20013. 605. xx. 20013. 606. xx. 20
136. xx1136. xx2136. xx3136. xx4136. xx5136. xx6
Needle diameter D
[mm]
2.11.20.80.60.40.3
015. 600
Ordering no.
For nozzlesType Mat. no.
303
SS
3516
Bra
ss
plat
ed013. 601. xx. 10013. 602. xx. 10013. 603. xx. 10013. 604. xx. 10013. 605. xx. 10013. 606. xx. 10
136. xx1136. xx2136. xx3136. xx4136. xx5136. xx6
Needle diameter D
[mm]
2.11.20.80.60.40.3
Ordering no.
Type Mat. no.
303
SS
16
Ordering no.
For nozzlesType Mat. no.
303
SS
3516
Bra
ss
plat
ed
013. 601. xx. 30013. 602. xx. 30013. 603. xx. 30013. 604. xx. 30013. 605. xx. 30013. 606. xx. 30
136. xx1136. xx2136. xx3136. xx4136. xx5136. xx6
Needle diameter D
[mm]
2.11.20.80.60.40.3
For all nozzlesof the series 136
Hex
Hex
*max. opened
Hex 18
Hex 18
1.29
Accessories for pneumatic atomizing nozzlesSeries 136 und 166
Angled screwed connection for hose diameter 6 mm
Ø 6
25
8
Hex 16
1/4 BSPP
26
Screwed connection for hose diameter 6 mm
Hex 13
Ø 6
1/4 BSPP
24
8
Screwed connection for hose diameter 8 mm
Hex 15
Ø 8
1/4 BSPP
26
8
Angled screwed connection for hose diameter 8 mm
25
8
Ø 8
Hex 16
1/4 BSPP
27.5
Material: Brass platedWeight: 12 g
Material: Brass platedWeight: 35 g
Material: Brass platedWeight: 14 g
Material: Brass platedWeight 35 g
095. 016. 35. 11. 79. 0
Ordering no.For all nozzles
of the series 136 and 166
095. 016. 35. 13. 13. 0
Ordering no.For all nozzles
of the series 136 and 166
095. 016. 35. 11. 80. 0
Ordering no.For all nozzles
of the series 136 and 166
095. 016. 35. 13. 14. 0
Ordering no.For all nozzles
of the series 136 and 166
Particularly fine full coneatomization. Siphon princi-ple. Internal mixing of fluids.Integrated regulating device.Applications: Lubrication, cooling, humidifi-cation of air.
Pneumatic atomizing nozzles, Full cone, siphon principle, internal mixing Series 140
Ordering no.
Spray angle
V W = Liquid Vn L = AirEØ
[mm]
Hs
Aspiration-height
Air
Wat
er
20°-30° 140. 252. 30. 01
<)
0.750.50500200
-4.50
-2.50
4.507.00
4.004.00
8.0010.00
6.006.00
10.5012.00
[mm WS]
W
[l/h]
L
[m3/h]
W
[l/h]
L
[m3/h]
W
[l/h]
L
[m3/h]
W
[l/h]
8.008.00
L
[m3/h]
. .
p [bar] Air pressure0.5 1.0 2.0 3.0
E = narrowest free cross section (water)
Weight brass: 70 g
Nipple014. 010. 30. 04(Material brass)Weight: 17 g
Accessories:
Gasket014. 040. 727.8 x 12 x 1 (EWP 210)
Assembly scheme
1.30
Air
Water
1.31
The ViscoMist™ series offersindependent regulation ofboth atomizing air and fanair, which provides the userwith infinite control over theviscous fluid’s spray patternand droplet size.
The ViscoMist™ nozzle features a standard ‘LiquidShut-Off/ Clean-Out Needle’function. This design elementactivates and deactivates theliquid supply, while simul-taneously removing excessfluid from the fluid nozzle preventing clogging. This feature is especially vital whenthe viscous liquids are beingapplied in continuous processenvironments.
The modular design of theViscoMist™ allows maximumflexibility to meet the exactspray requirements.
Interchangeable air caps andvarious flow capacities areavailable to suit any sprayingapplication needs.
Nozzle body configurations
One nozzle – three spraycharactersn - Solid stream
- Full cone- Flat fan
n Independent regulation ofliquid, atomizing air andfan air
n Fluid circulation possible(Nozzle body with 5 connections)
Atomizing air / Fan air / Signal airThe atomizing air causes theliquid to atomize at the nozzleorifice. The spray charactercan be adjusted with the fanair to suit the application. Thesignal air activates the nozzle.
Outside mixing to spray viscous liquids, for example:n Coatingn Moisturisingn Lubricationn Glazingn Sanitising
Fluid cap optionsØ 0.38 mm to 2.54 mm
Valve positionNormally closed, fail-safe withloss of air
Signal air pressureMin. 2 barMax. 3 bar
Cycles per minute(short term):180 cycles / min
Material1Y (316L SS)
Ports01 (1/8“ NPT (F))11 (1/8“ BSPP (F))
Flow rate rangen Water: 7.8 to 307 l/h,
at 2 barn Air: 7.5 to 28.4 m3/h i.N.,
at 2 bar
Pneumatic atomizing nozzles,for atomizing viscous mediaSeries 176 ViscoMist™
Nozzle body configuration 2 Nozzle body configuration 4 Nozzle body configuration 5
8681
48,4
Ø 39,4Hex 13
Hex 41
Atomizing Air / Fan Air
Signal Air Liquid
Atomizing Air
Fan Air
Signal Air
Signal Air
Liquid
Atomizing Air
Fan Air
LiquidLiquid
4 connections3 connections 5 connections
Further information andordering data on request.