PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home...

6

Transcript of PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home...

Page 1: PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home Theater toþil nce half-inch-thick drywall screwed or nailed to 2-by-4 studs. Rap your
Page 2: PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home Theater toþil nce half-inch-thick drywall screwed or nailed to 2-by-4 studs. Rap your
Page 3: PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home Theater toþil nce half-inch-thick drywall screwed or nailed to 2-by-4 studs. Rap your
Page 4: PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home Theater toþil nce half-inch-thick drywall screwed or nailed to 2-by-4 studs. Rap your
Page 5: PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home Theater toþil nce half-inch-thick drywall screwed or nailed to 2-by-4 studs. Rap your
Page 6: PMI Acoustical Design & Engineering articles/120926_HomeTheater_quiet_Oct… · Reduce a Home Theater toþil nce half-inch-thick drywall screwed or nailed to 2-by-4 studs. Rap your

Screwed Fittings

Screwed Fittings

Nailed-Plywood Gusset Roof Trusses

Nailed-Plywood Gusset Roof Trusses

AJ Nov/161124/ · Kingspan K12 insulation between 250 50 tanaliged softwood studs Timber rain screen cladding, square edge, screwed through face 45mm 45mm tana ised shaped

AJ Nov/161124/ · Kingspan K12 insulation between 250 50 tanaliged softwood studs Timber rain screen cladding, square edge, screwed through face 45mm 45mm tana ised shaped

WLB-Nailed It-2016

WLB-Nailed It-2016

TRADITIONAL ROPE HAMMOCK - NagsHeadHammocks.comALTERNATE LOCATIONS : If you’d like your hammock to be hung indoors, the hooks can be screwed into studs located in the walls of your

TRADITIONAL ROPE HAMMOCK - NagsHeadHammocks.comALTERNATE LOCATIONS : If you’d like your hammock to be hung indoors, the hooks can be screwed into studs located in the walls of your

THIN, FACE-NAILED HARDWOOD STRIP FLOORING

THIN, FACE-NAILED HARDWOOD STRIP FLOORING

2.86 Pitch, Two-Ply Template 108 Studs - 154 Track2.86 Pitch, Two-Ply Template 126 Studs - 120" Track 144 Studs - 137" Track 162 Studs - 154" Track 135 Studs - 129" Track 153 Studs

2.86 Pitch, Two-Ply Template 108 Studs - 154 Track2.86 Pitch, Two-Ply Template 126 Studs - 120" Track 144 Studs - 137" Track 162 Studs - 154" Track 135 Studs - 129" Track 153 Studs

B3.1 Detailing for Hurricanes - OAS · B3.1-6 Most barrel tiles of clay or concrete rely on screwed or nailed fixings located near the lagging edges only. This is unsatisfactory.

B3.1 Detailing for Hurricanes - OAS · B3.1-6 Most barrel tiles of clay or concrete rely on screwed or nailed fixings located near the lagging edges only. This is unsatisfactory.

Keeping your Lath and Plaster Walls and Ceilingsheritageplasterrestorations.com/files/Lathandplasterhandout.pdfthe building. Nailed onto the studs are rough wooden strips or lath,

Keeping your Lath and Plaster Walls and Ceilingsheritageplasterrestorations.com/files/Lathandplasterhandout.pdfthe building. Nailed onto the studs are rough wooden strips or lath,

Dudes You're Screwed

Dudes You're Screwed

Nailed to the cross

Nailed to the cross

Tuxedo studs

Tuxedo studs

shear studs

shear studs

Nailed Joint

Nailed Joint

GAS VENTILATION · manufacturers regardless of whether they are a sole ... 316 Stainless Steel Single . ... Flue Support Bracket is nailed between the studs before the heater is installed

GAS VENTILATION · manufacturers regardless of whether they are a sole ... 316 Stainless Steel Single . ... Flue Support Bracket is nailed between the studs before the heater is installed

Don't Get Nailed!

Don't Get Nailed!

Screwed Moves

Screwed Moves

gwi.us.com · Acoustic-Ply shall be nailed, screwed, stapled, or bolted to the understructure at no greater than 12" centers along the edges and not greater than 24" centers in the

gwi.us.com · Acoustic-Ply shall be nailed, screwed, stapled, or bolted to the understructure at no greater than 12" centers along the edges and not greater than 24" centers in the

CD WELD STUDS - Midwest Fasteners STUDS WEIGHT CHARTS (FLANGE D-STEEL) STUDS (General Information) 7-7 CD STUDS (NAVY) MCAL..... SPECIAL CAPACITOR DISCHARGE WELD ...

CD WELD STUDS - Midwest Fasteners STUDS WEIGHT CHARTS (FLANGE D-STEEL) STUDS (General Information) 7-7 CD STUDS (NAVY) MCAL..... SPECIAL CAPACITOR DISCHARGE WELD ...

Cork Screwed

Cork Screwed