Plywood - Finieris
16
o machining and decorative finishing EN SURFACE AND EDGE MACHINING, FINISHING Plywood
Transcript of Plywood - Finieris
omachining anddecorative finishing
EN
SURFACE AND EDGE MACHINING, FINISHING
Plywood
Cutting-to-size elements 3
CNC-machining 5
Edge machining 7
Decorative finishing 9
Special overlaying options 11
1
Other options 13
Contents
Cutting-to-size 1
Cut-to-size elementsMaterial – Riga Form Machining – cutting-to-size
Cuttinto-size
Length: 100 – 4100 mmWidth: 20 – 2290 mmThickness: up to 120 mm
Size Tolerances
Length and width: +/- 0.5 mm/mSquareness of elements: max 1 mm/mEdge straightness: +/- 0.5 mm
Cut-to-size elements
3
Cutting-to-size
CNC-machining 2
Gymnasium floorMaterial – Riga PlyMachining – milling
Length: 100 – 5760 mmWidth: 200 – 2290 mmThickness: up to 500 mm
Maximum sizes to be agreed upon.
Size
Milling, manufacture of various elements, even ellipses, polygons, ovals
Drilling
Blind and through holes
Profiling and sanding of edges
High quality CNC-machining
CNC-machining
5
CNC-machining
Edge machining 3
Trailer floorMaterial – Riga Tex Machining – cutting-to-size, profiled edges (partial groove H-DG)
Length: 100 – 4000 mmWidth: 260 – 3500 mmThickness: up to 50 mm
Size
Profiles
Standard profiles
Edge sealing, other profiles and specific tolerances upon request.
7
Edge machining
Tolerances
Width after machining: +/- 3 mm/mDifference of diagonals: max 0.3 mm/mTo centre of T&G from base line: +/-0.2 mm
H-TG1
H-TG2
H-TG4
H-TG3
Groove H-G
Half lap H-PS Chamfer H-L
Partial groove H-DG
Profile for table tops H-M 4
Profile for table tops H-M 11
Rounding H-R
Profile for table tops H-M 1
Profile for table tops H-M 5
Decorative finishing 4
Office furnitureMaterial – Riga Ply Machining – cut-to-size, milling, edge profilingDecorative finish - staining and lacquering
Priming, painting, lacquering, staining and impregnation
Length: 500 – 4400 mmWidth: 100 – 1250 mmThickness: 4 – 30 mm
Sizes
Priming with UV hardening (UV) or polyurethane (PU) primer
Acid curing (AC), polyurethane (PU) or water base (WB) paint coating
Nitrocellulose (NC), acid curing (AC) or polyurethane (PU) lacquer coting
Staining with water base stains
Surface treatment with wood preservatives
Silkscreen printing (logo, product, code etc.) with water resistant paints
9
Other decorative finishing solutions
Application of specific materials (epoxy etc.)
Veneering
Staining
Coating with granules
Decorative finishing
Decorative finishing options
StainingVeneering Coating with granules
Overlaying 5
Acoustic panelsMaterial – Riga HPLMachining – cut-to-size, perforating
Veneering or overlaying panels with plastic, cork and various other materials
Special overlaying options
Length: up to 3660 mmWidth: up to 1580 mmThickness: up to 50 mm
Size
Standard options
11
Veneering the panels with rotary cut or sliced veneer of various wood species
Overlaying the panels with plastic (HPL, CPL)
Overlaying the panels with linoleum, rubber, cork, aluminum, polypropylene (PPL), thermoplastic polyolefin (TPO) and other materials
Overlaying the panels with special wooden composite material (WPC)
Riga Color Riga HPL Riga Poliform
Riga Silent Riga Decor Riga Composite (AL, PPL, TPL)
Other product options 6
Trailer floor componentsMaterial – Riga Tex Machining – cut-to-size, milling, drilling, edge sealing, packaged as a set of components
Precise drawings basedon customer's sketches
Other product options
13
Other product options
Jointing of panels Panel sets Assembly of panels with complementarymaterials (rings, corks etc.)
Special packaging Precision machining Silk screen printing
Bended elements
