Plugs and Setting Tools - Oilfield Services - Halliburton ... · PDF filePlugs and Setting...

www.jetresearch.com • 8432 South I-35 West • Alvarado,Texas 76009-9775 • PHONE: 817-761-2000 •FAX: 817-783-5812

Plugs and Setting Tools

Jet Research Center offers a variety of field-proven, reliable plugs, setting tools, and associated equipment. Many of these products are in their second and third generation of development and have been improved to increase their efficiency and effectiveness. This section provides information concerning the following equipment:

• Wireline Pressure Setting Tools• Bridge Plugs• Dump Bailers


Jet Research Center’s Setting Tools feature top and bottom pistons to eliminate presetting of plugs, retainers, or packers. A slow burning power charge allows positive setting with less shock stress. These tools are easily maintained and have self-bleeding capabilities. In addition, “Long-Stroke” Wireline Pressure Setting Tools feature increased stroke length to enable the setting of casing patches, long travel bridge plugs, and any tool requiring more than normal stroke and tension than standard conventional pressure setting tools. Their features are the same as the standard tools except for the addition of a second working piston.

There are three types of redress kits for each JRC Setting Tool: Hight Temperature, Standard and Arctic. The redress kit consists of o-rings, the bleed plug and the shear pin.

Redress Kit Description

Temperature Rating

High Temperature 32°F-400° (°C-204°C)

Standard 32°F-350°F (°C-177°C)

Arctic -20°F (-29°C-107°C)

Wireline Pressure Setting Tools


Specifications:• Pressure rating: 20,000 psi• Temperature rating: 400°F• Shear force: 15,000 lb• Maximum stroke: 10.07 in.

Reference Objects:• Standard Kit: 101794905• RED Igniter: 101320910• Firing Head Adapter, RED Igniter: 101293376

Ref. Part No Description

A 101974677 Setting Tool Assembly, 1 11/16 Long Stroke, Self Bleeder

B 100013383 Assembly Hi-Pressure Firing Adapter

B001 100001949 O-Ring ( 2 Required, 90 Duro) B002 100113859 O-Ring ( 2 Required, 90 Duro)

1 100013382 Top Sub, 1 11/16 OD High Pressure, Multi-Stage Setting Tool

2 100142984 Cylinder, Powder Chamber3 100142981 Bottom Sub, Powder Chamber

4 100142976 Sub, Orifice, 1 11/16 MSST Self Bleeder

5 100142977 Cylinder, Upper,1 11/16 MSST Self Bleeder

6 100142980 Working Piston7 100142982 Tandem Sub

8 100142975 Bottom Cylinder, 1 11/16 OD High Pressure Multi-Stage Settting Tool

9 100142974 Bottom Piston, 1 11/16 OD High Pressure Multi-Stage Setting Tool

10 100142921 Lock Ring

11 100004226 Adapter, Sub (Special), 1 11/16 High Pressure Setting Tool

12 100142983 Release Ring, 25,000 lb ± 500 lb14 100113860 O-Ring (2 Required, 90 Duro)15 100113856 O-Ring (4 Required, 90 Duro) 16 100000162 O-Ring (14 Required, 90 Duro)

17 102164416 Bleed Plug

18 100004219Shear Pin, 1 3/8, 1 11/16, 1.70 and 2 1/8 in. OD Self Bleeder Setting Tool - 737 lb

19 494028 Power Charge, High Temperature20 100004220 Fuze Assembly

1 11/16" Long Stroke Self-Bleeder Setting Tool

1 11/16" O.D. Long Stroke Self-Bleeder Setting Tool

1 11/16" Long Stroke Self-Bleeder Setting Tool

3

16

2

1

2x

16 2x

15 2x

18

4

16

17

6

5

16 3x

16 2x

7

16 2x

8

9

16 2x

10

12

11

142x

152x

19

B001

B002

B

A

20


2-1/2" O.D. "Shorty" Self-Bleeder Setting Tool


11

2

3

1

4

5

7

8

9

10

12

13

15

16

17

14

6

11

11

11

11

oil

A

B

B001

B002

11

Ref. Part No Description

A 101965920 2 1/2 Inch, Shorty Self Bleeder-Setting Tool

B 100013383 Assembly Hi-Pressure Firing Head

B001 100001949 O-Ring ( 2 Required, 90 Duro) B002 100113859 O-Ring ( 2 Required, 90 Duro)

1 101001523 Firing Head Adapter2 101001522 Power Chamber3 100142944 Shear Sub4 100142943 Bleed Plug5 100142945 Top Piston 6 100142942 Top Cylinder, Self Bleeder7 100142950 Tandem Sub8 100142951 Bottom Cylinder

9 100142946 Bottom Piston, 2 1/2 OD Setting Tool

10 100142947 Lock Ring11 100000165 O-Ring (13 Required, 90 Duro) 12 100000159 O-Ring (2 Required, 90 Duro) 13 100013370 Shear Pin, 2210 Lbs 14 100010649 O-Ring (2 Required, 90 Duro) 15 102164416 Bleed Plug16 494030 Power Charge, High Temperature

17 100004220 Fuze Assembly


Specifications:

• Pressure rating: 17,000 psi note: The 2.5-in. Shorty can be upgraded to 20,000 psi by replacing the top piston with top piston part number 102133557.

• Temperature rating: 400°F

• Shear force: 35,000 lb

• Maximum stroke: 9.72 in.

Reference Objects:

• Sandard Kit: 101899261

• RED Igniter: 101320910

• Firing Head Adapter, RED Igniter: 101293430


Ref. Part No Description A 102112757 3-1/2-in. Shorty Setting Tool

1 100142916Nut, Lock, Adapter Rod 3 1/2 OD and 3 7/8 OD Setting Tool to Baker Tool No. 10 and No. 20

2 100013371 Bottom Piston 3 1/2 OD and 3 7/8 OD Setting Tool

3 100010655 O-Ring (13 Required, 90 Duro)4 101223305 Bottom Cylinder

5 101223307 Top Piston 3 1/2 OD and 3 7/8 OD Shorty Setting Tool

6 100113938 O-Ring (2 Required, 90 Duro)7 100142973 Top Cylinder8 102164416 Bleed Plug9 101223306 Top Sub

10 100013370Shear Pin, 2 1/2, 2 3/4, 3 1/2, 3 7/8 and 3 1/4 in. OD Self Bleeder Setting Tool

11 101223308 Shear Sub12 100010648 O-Ring (2 Required, 90 Duro) 13 101007635 Power Chamber14 102052890 GO Style Firing Head Adapter15 100000169 O-Ring (1 Required, 90 Duro)

16 100142917Ring Lock, Adapter Rod, 3 1/2 OD and 3 7/8 OD Setting Tool to Baker Tool No. 10 and No. 20

17 494031 Power Charge High Temperature

18 100004220 Fuze Assembly High Temperature


Specifications:• Pressure rating: 15,000 psi

• Temperature rating: 400°F

• Shear force: 57,400 lb

• Maximum stroke: 8.75 in.

Reference Objects:• Standard Kit: 100013381

• RED Igniter: 101320910

• Firing Head Adapter, RED Igniter: 101293591



11

13

3

5

7

8

910

12

16

6

15

14

3x

4

3 3x

3 3x

3 2x

2

1

2x

2x

A

17

18

3 4x


The Elite bridge plug is used mainly in cased hole for permanent or temporary plugging. Elite bridge plugs prevent movement of fluid or gas from either direction in below a perforated sec-tion before squeeze-cementing or fracturing, providing a pressure seal for testing casing, set-ting in a dry hole prior to abandonment (to allow recovery of upper casings), and repairing surface equipment.Mechanical bridge plugs can be run and set by drill pipe or tubing, but are usually set with a high-pressure electric WST. Other techniques include setting on coiled tubing using a pressure-actuated firing head. Where the plug is required for life of well applications or is planned or perforate the zone next to the plug, the durabil-ity and strength of the plug can be increased by dumping cement on top of the plug after is set. Before running a job, it is essential to select the proper size and type of bridge plug, considering the following factors:• Borehole temperature• Maximum differential pressure to which the plug

will be subjected.• Borehole restrictions through which the plug and

WST will have to pass.• Actual casing or tubing size where the bridge plug

will have to seal.

Elite Bride Plug

Release Ring

Ratchet Lock-Ring

One-Piece Slips

Sealing Elements

One-Piece Slips

Elite Bridge Plug


Part No. Element Material

PlugMax OD

(in.)

Setting Range (in.) Shear

Stud

Setting EquipmentSetting Tool

Min Max Setting Sleeve

Adapter Rod

Setting Nut

100009712 N

1.710 1.870 2.107

13,000

100142920 N/R

N/R

1 1/2-in. SST 100142901**

101933230 V1 11/14-in. SST 101974679

101933250 A

100007894 N

2.100 2.80 2.440

100142922

100142923

1 1/2-in. SST 100142901**

100000268 V1 11/16-in. SST 101974679

101939463 A

100009711 N

2.160 2.280 2.563

1 1/2-in. SST 100142901**

101940154 V1 11/16-in. SST 101974679

101940158 A

100013366 N

2.500 2.563 2.992100071889

1 1/2-in. SST 100142901**

101933592 V 1 11/16-in. SST 101974679

101934092 A 120022112 2 1/8-in. MSST 101909436

100007893 N

2.750 2.867 3.25869676

100142927

1 1/2-in. SST 100142901**

101943188 V 1 11/16-in. SST 101974679

101943194 A 101223293 2 1/8-in. MSST 101909436

100004213 N

3.120 3.340 3.732

25,000

100142949 696752 1/2-in. SST 101965920

101941678 V

101941679 A 2 3/4-in. SST 101916335***

120038196 N

3.500 3.826 4.090

100162433 10014298

2 1/2-in. SST 101965920101932174 V

101933184 A 2 3/4-in. SST 101916335***

100013355 N

3.710 3.920 4.560 29,000

2 1/2-in. SST 101965920

101954055 V 2 3/4-in. SST 101916335***

101940546 A 100013372 120042359

3 1/2-in. SST 101974666†102112757‡

101927328 N

4.240 4.580 5.047 33,400

100142935

64688

100013375101934541 V

101934542 A

69677 N

4.750 5.140 5.595 35,800 69702101935105 V

101935106 A

100013357 N

5.340 5.595 6.094

48,900 100013377 100013376

101938470 V

101938509 A

100013358 N

5.610 5.989 6.655101941324 V

102057004 A

Elite Bridge Plug Specifications

Elite Bride Plug



PlugMax OD

(in.)

Setting Range (in.) Shear

Stud

Setting EquipmentSetting Tool


Adapter Rod

Setting Nut

100013360 N

6.090 6.625 7.263

48,900

100013377

64688 100013376 3 1/2-in. SST 101974666†102112757‡

101950899 V

101950900 A

100142772 N

6.960 7.511 8.248

69680

101941000 V

101941001 A

120038198 N

7.710 8.435 8.921101952549 V

101952550 A

69678 N

8.710 9.250 9.784

69701

101955368 V

101955369 A

69679 N

9.500 9.850 11.150101955381 V

101955385 A

Elite Bridge Plug Specifications

Elite Bride Plug

* Element material: N=Nitrile -40-250°F, V=Viton -40-350°F, A=Aflas -20-400°F.**1 1/2-in. OD Shorty WST’s must be epuipped with Adapter Kit 100142906, which converts the bottom of the 1 1/2-in. tools to be compatible with the 1 11/16-in Setting Adapter.***WST’s require replacing the bottom piston with 100142946.†101974666 3 1/2-in. Shorty Wireline Setting Tol (20k Rated)‡102112257 Elite Bridge Plugs are not guaranteed against failure or damage caused by perforating shock unless sufficient sand or cement is dumped above the plug.


Elite Magna-Range Bridge Plug

The Elite Magna-Range Bridge Plug is a specialty plug designed to run through tubing or restricted pipe and set in the larger tubing or casing below the restricted interval. This capability saves considerable time and expense by eliminating the need to pull tubing to set a plug. Elite Magna-Range Plugs have many of the advanced design features of Elite cast-iron bridge plugs.

Features:• Designed to pass through restrictions and set

below in tubing or casing with a larger ID than the restriction.

• For the same setting range, the running OD is smaller than conventional bridge plugs.

• Can be set on wireline, tubing, or coiled tubing or slickline using “explosive” setting tools or a DPU® downhole power unit.

• Single-piece slip design to reduce the chances of premature setting. Slip OD is less than the plug body OD.

• Slips set securely in grade P-110 casing.• Winged cones guide the slips to evenly spaced

positions against the pipe.• Rocker action steel backups, steel petals, and a

firm rubber backup support softer rubber sealing element.

• Ratchet lock-ring holds the dynamic setting force.• Elite Magna-Range Bridge Plugs come in 13

different sizes with pipe setting IDs between 1.610 to 6.625 in.

• All sizes of Magna-Range plugs have the option of either Nitrile, Viton or Aflas seal elements.

Where the plug is required for life-of-well applications, or it is planned to perforate the zone next to the plug, the durability and strength of the plug can be increased by dumping 10 to 20 ft of cement on top of the plug once it has been set. Before running a job, it is essential to consider the size and proper selection of the bridge plug. The following factors should be considered:

• Borehole temperature• Maximum differential pressure the plug will be

subjected to.• Borehole restrictions the plug and setting tool will

have to pass through.


1 Ratchet Lock-Ring

3 Winged Cones

4

5 Packing Element

6

2 One-Piece CaseHardened Slips

One-Piece CaseHardened Slips

Rocker ActionBackup

• Actual casing or tubing size where the bridge plug will have to seal.





PlugMax OD (in.)

Setting Range (in.)

Shear Stud

Setting Equipment

Setting Tool


Adapter Rod

Setting Nut

100001214 N

1.406 1.610 1.995

8,000

101223350

N/R

N/R

1 3/8-in. MSST 101974673102057005 V

101284835 A

69673 1/2-in. SST 101973936102098602 N

1.468 1.610 1.995100013363 V

101284820 A

101952178 N

1.750 1.905 2.441

13,000

1001429201 11/16-in. LSST 101974677

100013353 V

101284837 A

101952182 N

1.906 2.156 2.765100009713 V

101284836 A

101917026 N

2.187 2.375 3.000

100142922

100013364 V120022112 2 1/8-in. MSST 101971445

100144629 A

101952185 N

2.281 2.441 3.343

100014922 1 11/16-in. LSST 101974677

100009714 V12002212 2 1/8-in. MSST 101971445

101284839 A

100013361 N

2.500 2.875 3.500

100142922 1 11/16-in. LSST 101974677

102091874 V 101223369 2 1/8-in. MSST 101971445

102092188 A 100142962 2 1/2-in. SST 101965920**

100071886 N

2.750 3.187 3.920

25,600

101223293 2 1/8-in. MSST 101971445

102079756 V100142964

2 1/2-in. SST 101965920**

102080297 A 2 3/4-in. SST 101916335***

100013365 N

3.000 3.437 4.154

101223293 2 1/8-in. MSST 101971445

102049418 V100142964

2 1/2-in. SST 101965920**

102045609 A 2 3/4-in. SST 101916335**

120009674 N

3.250 3.920 4.276

29,200

100142949 1001429632 1/2-in. SST 101965920**

101979126 V 2 3/4-in. SST 101916335***

101979187 A 101950701 101950702 3 1/4-in. MSST 101974644

100013362 N

3.625 3.900 4.670100162433 100142928

2 1/2-in. SST 101965920**

101981323 V 2 3/4-in. SST 101916335***

101981329 A 100013372 120042359 3 1/2-in. SST 101974666†102112757‡

*WST will require the bottom piston to be replaced with 101985459.



PlugMax OD (in.)

Setting Range (in.)

Shear Stud

Setting Equipment

Setting Tool


Adapter Rod

Setting Nut

120009675 N

4.062 4.154 5.044 33,400100142967 100142961

100013375

2 1/2-in. SST 101965920

102095729 V 2 3/4 SST 10191335**

102096110 A 64867 64688 3 1/2-in SST 101974666†102112757‡

101950331 N

6.125 7.921 6.625 48,000 101950329 101950324 N/R 3 1/4-in. MSST 101974644102102263 V

102102288 A

* Element material: N=Nitrile -40-250°F, V=Viton -40-350°F, A=Aflas -20-400°F.**1 1/2-in. OD Shorty WST’s must be epuipped with Adapter Kit 100142906, which converts the bottom of the 1 1/2-in. tools to be compatible with the 1 11/16-in Setting Adapter.***WST’s require replacing the bottom piston with 100142946.†101974666 3 1/2-in. Shorty Wireline Setting Tol (20k Rated)‡102112257 Elite Bridge Plugs are not guaranteed against failure or damage caused by perforating shock unless sufficient sand or cement is dumped above the plug.



Through Tubing Dump Bailers

Dump Bailers

See the Through Tubing Plugback Equipment Operation and Service Manual 100146437 for specialized mixing, pumping and bottom fill equipment not shown here.

Through Tubing Dump Bailers

Item Description 1 11/16-in. 2-in.1 Contact Sub Assy 100013316 1000133162 Boot - 1/16-in. Wire Hole 100004173 1000041733 Top Section - 10 ft 100118478 1000108714 Extension Section - 5 ft 100118479 100118480

Extension Section - 10 ft 100117089 1000808025 O-ring - 90 Duro #568 100113868 1012992676 Blast Sub 120021849 1001331577 Bailer Bottom - Collar 120131667 1001605608 Bottom Glass 100009853 1000099049 Detonator N/A N/A

10 Detonator Weight 100142990 10014299011 Grounding Spring 100000645 10000064512 Lead Wire 100115507 100115507

1

2

3

4

5

6

7

8

9

10

11

12

5


Casing Dump Bailers

Dump Bailers

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

9

17

9

16

Casing Dump Bailers

*Teflon is a trademark of E.I. Dupont De Nemours.

Item Description 3-in. 3 1/2-in. 4-in. 5-in.1 Electrical Contact 100004162 100004162 100004162 1000041622 Contact Retainer 100000615 100000615 100000615 1000006153 O-ring - 95 Duro #568 100000222 100000222 100000222 1000002224 Upper Spinning Collar Sub 100000442 100000442 100000442 1000004425 Upper Spinning Collar 101299220 100000443 100000443 1000004436 Boot - 1/16-in. Wire Hole 100004173 100004173 100004173 1000041737 Top Section - 10 ft 101299221 100000444 100118481 686058 Extension Section - 5 ft 101299223 100000445 100118482 68606

Extension Section - 10 ft 101299224 100000446 100118483 686079 O-ring - 95 Duro 100114816 100010700 10000234 10011485010 Blast Sub 101299225 100000447 100118484 6860811 Bailer Bottom - Glass Type 101299226 100000448 68609 6861012 Glass Disk 100010872 100000449 6841 684213 O-ring - 95 Duro 100000227 100000231 100000232 10000023614 Detonator N/A N/A N/A N/A15 Detonator Weight 100142990 100142990 100142990 10014299016 Grounding Device 100000664 100000664 100000664 10000066417 Lead Wire - 22 GA, *Teflon 100115507 100115507 100115507 10011550718 Seizing Line - High-temp. 69150 69150 69150 69150

Plugs and Setting Tools - Oilfield Services - Halliburton ... · PDF filePlugs and Setting...

Documents

Transcript of Plugs and Setting Tools - Oilfield Services - Halliburton ... · PDF filePlugs and Setting...