Plast Engineering Knauff e.K.PLASTICS - MACHINES - TECHNOLOGIES - EQUIPMENTS - SERVICE - CONSULTING

Since 1971

Kantstraße 10 A - 65232 Taunusstein - GermanyTel.: +49 (0)6128 21131 - Fax: +49 (0)6128 23180

sales@plast-knauff.de

Plast Engineering Knauff e.K.

www.pet-equipments.de www.plastics-equipments.de

Fully-automatic PET stretch-blow-moulder, model , for themanufacture of PET bottles / containersf r o m P E T p r e f o r m s .

PETblow A2Voll-automatische PET HohlkörperStreck-Blas-Maschine, Modell

für die Herstellung von PET Flaschena u s P E T P r e f o r m e r n .

PETblowA2,

Flaschen Volumen ca.: 0,2 - 2,0 Liter,oder andere

Ausstoßleistung ca.: 1000 - 1300 Fl. / Stunde

> ECON-PETblow A2 <

Kantstraße 10 A - 65232 Taunusstein - GermanyTel.: +49 6128 21131 - Fax: +49 6128 23180

sales@plast-knauff.dewww.plastics-equipments.dewww.pet-equipments.de &

Plast Engineering Knauff e.K.

Preform supplyPreform ZuführungDANFOSS cooling unit

(positioned inside of the machine)

DANFOSS Kühlaggregat(innerhalb der Maschine installiert)

Take out of the thermally prepared preforms from theheating chamber and transfer into the closed blowmould.

Übergabe der temperierten Preforms vom Heizkanalin das geschlossene Blaswerkzeug.

Machine System:

Cavity:Bottle diameter:Bottle height:Neck diameter:

Blowing pressure:Air consumption:Installed power:Dimensions:Weight:

Bottle volume:

Capacity approx.:

ECON-PETPETblow A2fully-automatic

also from 20 ml2 cavities100 mm330 mm28 mm, others possible

15 bar2,300 l / min9.5 kW4.5 x 1.3 x 2.3 m900 kg

0.2 - 2.0 Liter

1000 - 1300 bph

ECON-PETPETblow A1 jumbo

3.0 - 5.0 Liter

500 bph

fully-automatic

1 cavity250 mm330 mm46 mm, others possible

15 bar1,600 l / min9.5 kW4.5 x 1.55 x 2.3 m900 kg

Preform cabinettPreform Vorratsbehälter