PLASSON UK LTD. - Nipple Line Head & End Kits New... · 2015. 6. 23. · PLASSON PRESSURE...

2
Plasson Sets the Industry Standard Head Kit End Kit Accommodates the highest flow rate in the market Offers a wide range of required outlet pressure, virtually independent of inlet pressure Quick and simple installation Easy to operate Half turn, built in, high pressure flush Reliable, trouble free operation Operates either from line head or mid line One integral unit Quick and simple installation Quick and easy connection of flushing flex hose 2012 Nipple Line Head & End Kits

Transcript of PLASSON UK LTD. - Nipple Line Head & End Kits New... · 2015. 6. 23. · PLASSON PRESSURE...

  • P l a s s o n S e t s t h e I n d u s t r y S t a n d a r d

    Head Kit

    End Kit

    • Accommodates the highest �ow rate in the market• Offers a wide range of required outlet pressure,

    virtually independent of inlet pressure

    • Quick and simple installation• Easy to operate• Half turn, built in, high pressure flush• Reliable, trouble free operation• Operates either from line head or mid line

    • One integral unit• Quick and simple installation• Quick and easy connection of flushing flex hose

    2012

    Nipple Line Head & End Kits

  • 0

    N i p p l e L i n e H e a d & E n d K i t s

    It is recommended to connect the �exible hose as shown

    U.S. PATENT NO. 5765588.Patent also granted in other countries.

    Silicone lubricants may be used, avoid contact of oil based materials with regulator. Application of any material not compatible with ABS may cause permanent damage to the product.

    Regulate Flush

    It is recommended to connect

    PLASSON PRESSURE REGULATOR

    • If water is supplied from main pipeline, incoming pressure to header kit should be 1.5 bar (22psi), max. 2 bar (30psi). If water is supplied from a header tank, the header tank should be at least 3m (10ft.) above �oor level.

    • Outlet pressure range 0-1 meter water (0-40” water/0-1.5 psi).• To switch regulator to high pressure �ushing: turn �ushing valve to “FLUSH” position.W A R N I N G

    Part No. Cat. No. Description

    Line Head Kit 2205730

    Mid House Kit 2205751

    A 2205030 Line Head Stainless Steel Connector 1 0

    A2 2205032 Mid Line Stainless Steel Connector 0 1

    B 2205122 Insert Fitting 1 2C 2205700 Pressure Regulator 1 0D 2205750 Pressure Regulator - Dual 0 1E 2205721 Bolt 1/4"-17mm 4 4F 2209017 Bolt 1/4"-11mm 2 4G 2209018 Nut 1/4" 6 8H 3013055 QTV Flexhose 1/2"-1/2"F 1 1I 2205436 Indicator 60 1 1

    2209132 Tube Connector 1/2"-12mm 1 12209083 Stainless Steel Pipe Clamp 1 1

    Part No. Cat. No. QTY. Item

    1 2205701 1 Top Shell1A 2205725 1 Top Shell - Mid House2 2205702 1 Bottom Shell3 2205703 1 Knob4 2205704 1 Nut5 2205705 1 Backing Plate6 2205706 1 Upper Spool7 2205707 1 Lower Spool8 2205708 1 Washer9 2205709 1 Cap

    10 2205710 1 Flushing Valve11 2205711 1 Valve Nut12 2205712 1 Valve Split Ring13 2205713 1 Spring14 2205714 1 M6 Bolt15 2205715 1 Large Diaphragm16 2205716 1 Small Diaphragm17 2205717 1 Seal18 2205718 2 Circumferential O-Ring19 2205719 1 O-Ring20 2205720 9 PT Screw 4.0mm21 2205722 1 Nut for Bolt22 2205732 1 Cap Plug23 2205680 1 Grey Cap Plug

    G l o b a l P r e s e n c e - L o c a l C o m m i t m e n t

    Plasson Poultry Division, 105 Ilan St. P.O.B. 108 North Industrial Estate Or - Akiva 30600, Israel Tel: +972-73-2413001 Fax: +972-73-2413221 E-mail: [email protected] www.plassonpoultry.com

    7480 12.11 08020312E

    B2B

    MA

    RCO

    M