Plasma Ion Processing System Catalog
Transcript of Plasma Ion Processing System Catalog
・Improvement in surface hardness, corrosion-resistance, wear resistance, fatigue strength and tribological properties・Prevent deterioration of surface roughness. Low temperature and short time processing・Uniform nitriding layer with our unique hollow cathode type plasma source
Weight Approximately 2,600kgSystem dimensions W2,200 X D2,100 X H2,650mm
Installed port (plasma/ion source)
5 ports (max 2 units/max 4 units)
φ400 X H300N2, Ar<500℃
Treatment areaGas
Processing temp
HV
1,600
SKD11
STAVAX
SUS630
SUS440C
SUS304
1,200
800
400
0
Load : 25g Holding time : 10s
1,500
Vick
ers
hard
ness
[kg
/mm
2 ]
1,250
1,000
750
5000 20
Depth from the surface [μm]40 60 80 100
Vickers hardness (kg/mm2)After nitriding
Untreated
Surface conditionInitial Ra:0.019μm Nitriding Ra:0.068μm
High speed tool steel
Temp : 420℃Duration : 110min
50 μm
Plasma Ion Processing systemPlasma Ion Processing system
1-1, Shinmeiwa-cho, Takarazuka, Hyogo,665-0052TEL : +81-798-54-1880 FAX : +81-798-54-1805Email : [email protected]://www.shinmaywa.co.jp/pbp/english/
'19.7 Z-M038
Particle Beam DepartmentIndustrial Machinery Systems Div.
ShinMaywa Industries, Ltd.
Specifications
Treatment examples
Features