PLANAR MOSAIC OVERLAP BRACKETS · Add Intrigue with Overlapping Planar Mosaic Displays Planar...
2
Add Intrigue with Overlapping Planar Mosaic Displays Planar offers special extension brackets that allow Planar® Mosaic® Architectural Video Wall tiles to be mounted in overlapping configurations. These brackets present creative options for adding depth and texture to an architectural video wall. The Mosaic Mount™ is included with every Planar Mosaic video wall tile and supports virtually any rotation or position. An extension bracket is used together with the Mosaic Mount in order to position a Planar Mosaic tile further from the wall. PLANAR MOSAIC OVERLAP BRACKETS
Transcript of PLANAR MOSAIC OVERLAP BRACKETS · Add Intrigue with Overlapping Planar Mosaic Displays Planar...
Add Intrigue with Overlapping Planar Mosaic Displays
Planar offers special extension brackets that allow Planar® Mosaic® Architectural Video Wall tiles to be mounted in overlapping configurations. These brackets present creative options for adding depth and texture to an architectural video wall.
The Mosaic Mount™ is included with every Planar Mosaic video wall tile and supports virtually any rotation or position. An extension bracket is used together with the Mosaic Mount in order to position a Planar Mosaic tile further from the wall.
PLANAR MOSAICOVERLAP BRACKETS
Planar is a trademark of Planar Systems, Inc. All other trade and service marks are the property of their holders. Copyright© 2016 Planar Systems, Inc. All rights reserved. This document may not be copied in any form without written permission from Planar Systems, Inc. Information in this document is subject to change without notice. 3/16
Extension Bracket Set-up
These steel brackets have two parts; a structural box <A> that mounts to the wall <D> and an interface plate <B> that mounts to the box. The Mosaic Mount <C> then attaches to the bracket’s interface plate, and the Planar Mosaic video wall tile snaps into the mount.
The brackets include bolts for connecting the Mosaic Mount to the extension bracket’s interface plate. The interface plate has multiple mounting holes that allow the plate to be attached to the box at any angle in 15-degree increments. The cable pass-through holes in the interface plate align with those in the Mosaic Mount, and holes in the box provide for flexible cable routing.
These brackets support one layer of overlap. This represents wall-mounted displays (back layer) plus extended displays (front layer). The brackets support displays that are mounted parallel to the wall. Any additional layers or non-standard angles relative to the wall require design and fabrication of custom brackets.
Planar Mosaic Display Bracket Part #
Planar® Salvador™ AD22 551-0568-00
Planar® Pablo™ AD46 551-0567-00
Planar® Vincent™ AD55 551-0566-00
Visit the Documents section on www.planar.com/mosaic to download schematics.
