pkyu 'kfDr funs'kky; vuqla/kku vfHkdYi vkSj ekud laxBu y ... · ISO 9001: 2015 Documents No....
Transcript of pkyu 'kfDr funs'kky; vuqla/kku vfHkdYi vkSj ekud laxBu y ... · ISO 9001: 2015 Documents No....
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 1 of 31
Hkkjr ljdkj jsy ea=kky;
GOVERNMENT OF INDIA MINISTRY OF RAILWAYS
Document No. MP-M-8.1-1
Ver. 1.0
Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled
by MP Directorate
pkyu 'kfDr funs'kky; MOTIVE POWER DIRECTORATE vuqla/kku vfHkdYi vkSj ekud laxBu RESEARCH DESIGNS & STANDARDS ORGANISATION
y[kuÅ & 226 011 LUCKNOW - 226 011
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 2 of 31
1.0 AMENDMENT HISTORY: -
S. No. Amendment date Version Reason for amendments 1.0 14-09-18 1.0 First issue under new documentation system
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 3 of 31
This document contains Qualifying quantity for up-gradation to approved vendors and Qualifying quantity & qualifying periods for approval for RDSO vendor for developmental order of critical locomotive items to be procured only from RDSO (Motive Power Directorate) approved sources, only with no exception being permitted, as per Annexure ‘A’ of Railway Board letter no. 2001/M(L)/466/2706 dated 28.05.2003 and it’s revisions. The Qualifying quantity & periods of such items will be applicable from the date of issue of this document.
SN.
Description EMD / DLW / Firm’s Pt. no. / Drawing No.
Specification No. Qualifying quantity for up-gradation to approved vendors
Qualifying quantity & Period for approval for RDSO vendor for
developmental order Qualifying quantity Qualifying Period
Engine and Engine system Items 1. Connecting Rod Bearings
(Steel Backed) Anti – Friction Metal Lined for ALCo locomotives.
• Half Bushing, Con Rod (Cap Only)
DLW Pt. no. 10150055 31PD 5703A 2000 80 (5 loco sets) One year
• Half Bushing, Con Rod (Rod Only)
DLW Pt. no. 10150043 2000 80 (5 loco sets) One year
2. Main Bearing Shell (Inter & Centre) (Steel Backed) Anti – Friction Metal Lined for ALCo locomotives
• Main Bearing Shell (Intermediate Thin wall Upper & Lower)
DLW Pt. no. 10150018 31PD 5703A 1800 75 (5 loco sets) One year
• Bearing Center Main (Upper & Lower Halves Thin Wall)
DLW Pt. no. 10150020 250 10 (5 loco sets) One year
3. Main Bearing, Thrust (Steel Backed) Anti – Friction Metal Lined Thrust Bearing (Gen. End Upper) for ALCo locomotives
DLW Pt. no. 10150031 31PD 5703 125 5 (5 loco sets) One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 4 of 31
SN.
Description EMD / DLW / Firm’s Pt. no. / Drawing No.
Specification No. Qualifying quantity for up-gradation to approved vendors
Qualifying quantity & Period for approval for RDSO vendor for
developmental order Qualifying quantity Qualifying Period
4. Bearing-Con Rod for EMD locomotive
1. Bearing- Con Rod- Lower EMD Pt. No 8136114 / DLW Pt. no. 16150181
320 24 (3 loco set) One year
2. Bearing- Con Rod- Upper EMD Pt. no. 8354118 / DLW Pt. no. 16150193
320 24 (3 loco set) One year
5. Main Bearings for EMD locomotives
EMD Pt. No / DLW Pt. no.
1. Main Bearing-Lower Gen / End
9543889 / 16150065 20 3 (3 loco sets) One year
2. Main Bearing-Lower Center
9543895 / 16150089 40 6 ( 3 loco sets) One year
3. Main Bearing-Upper Inter 9543944 / 16150030 140 21 (3 loco sets) One year 4.
Main Bearing- Upper Gen / end
9543950 / 16150053 20 3 ( 3 loco sets) One year
5. Main Bearing- Upper Center
9543956 / 16150077 40 6 (3 loco sets) One year
6.
Main Bearing- Lower Intermediate
9543882 / 16150041 140 21 ( 3 loco sets) One year
6. Filter Air Dryer & MR, for ALCo & EMD locomotives
-
(A) Filter Air Dryer for ALCo locomotives
DLW Pt. no. 11664253 - 400 40 (20 loco sets) One year
(B) Filter Air Dryer & MR, for EMD locomotives
EMD Pt. no. 9559346, DLW Pt. no. 17450822
-
7. Filter Dyna Cell for EMD locomotives
EMD Pt. no. 9093588 (Drg. No. 9552087), DLW Pt. no. 17452790
- 400 40 (20 loco sets) One year
8. Filter Element, Brake Panel, for EMD locomotives
NYAB Pt. no. 775925 - 200 30 (10 loco sets) One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 5 of 31
SN.
Description EMD / DLW / Firm’s Pt. no. / Drawing No.
Specification No. Qualifying quantity for up-gradation to approved vendors
Qualifying quantity & Period for approval for RDSO vendor for
developmental order Qualifying quantity Qualifying Period
9. Filter element, fibre glass, ECC for EMD locomotives
EMD Pt. no. 8402068, DLW Pt. no. 17453057
- 1000 100 (20 loco sets)
Six months
10. Low Mean Pore Size Primary & Secondary Fuel Oil Filter Elements for Diesel Electric Locomotives
RDSO Drg. No. SKDP-3901& 3902
RDSO Spec. No. MP.0.2600-25
600 loco sets 60 (30 loco sets) 190 days
RDSO Drg. No. SKDP-3908 & 3909
60 (30 loco sets) 100 days
11. 10” x 30” Long Life Lube Oil and Fuel Oil Filter Elements (Two Piece) for EMD Locomotives
EMD Pt. no. 40056007
RDSO Spec. No. MP.0.2600-26, RDSO Test Programme No. MP.TP-23.
2400 18 (3 loco sets) 190 days
12. Long Life Lubricating Oil Filter Element for Locomotive Diesel Engines
-
RDSO Spec. No. MP.0.2600-15
4800 160 (20 loco sets) with CLOC
250 days with CLOC
13. Filter elements, Pre-cleaner for ALCo & EMD locomotives
(A) Engine Inertial Primary filter for ALCo locomotives
DLW Drg.No. SK.No.-2213,DLW Pt. no. 11458010
RDSO Spec. No.MP.0.2600-16 & AirFlow & Efficiency of EDPS-436
100 loco sets 20 (10 loco sets)
One year
(B) Inertial Filter Assembly for EMD locomotives
EMD Pt. no. 10633569 & 10633570 (EMD Pt. no. 10631591, DLW Pt. no. 17452650)
100 loco sets 20 (10 loco sets) One year
(C) Car body filter for ALCo locomotives (for WDG3A & WDM3D locomotives)
DLW Pt. no. 11665830 100 loco sets 20 (10 loco sets) One year
(D) Car body filter for ALCo locomotives (for WDM2 locomotives)
RDSO drawing No. SKDL - 4705
100 loco sets 20 (10 loco sets) One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 6 of 31
SN.
Description EMD / DLW / Firm’s Pt. no. / Drawing No.
Specification No. Qualifying quantity for up-gradation to approved vendors
Qualifying quantity & Period for approval for RDSO vendor for
developmental order Qualifying quantity Qualifying Period
14. Filter elements, Secondary Engine Air Filters, for ALCo & EMD locomotives
(A) Glass Fibre Bag Filter for ALCo locomotives
RDSO Drg.No. SKDP-3505, DLW Pt. no. 11458045
RDSO Spec. No. MP.0.2600-16 & EDPS-535
800 80 (20 loco sets) Six months
(B) Glass Fibre Secondary Engine Air Filter for ALCo locomotives (Deep Design)
RDSO Drg. No. SKDP-3673
800 80 (20 loco sets) Six months
(C) Glass Fibre Secondary Engine Air Filter for ALCo locomotives
RDSO Drg. No. SKDP-3476
800 72 (12 loco sets) Six months
(D) Element Filter for EMD locomotives
EMD Pt. no. / Drg. No. 8470903, DLW Pt. no. 17452168
800 80 (20 loco sets)
Three months
15.
Disposable car body filters with built-in louvers and casing
50 loco sets 10 loco sets Six months
(A) Disposable car body filters with built-in louvers and casing For WDG3A, WDM3B, WDM3D and WDM3A locomotives
RDSO Drg. No. SKDP-4109, SKDP- 4110
(B) Disposable car body filters with built-in louvers and casing For WDM2 locomotives
RDSO Drg. No. SKDP-4111, SKDP-4112
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 7 of 31
SN.
Description EMD / DLW / Firm’s Pt. no. / Drawing No.
Specification No. Qualifying quantity for up-gradation to approved vendors
Qualifying quantity & Period for approval for RDSO vendor for
developmental order Qualifying quantity Qualifying Period
16. Soak Back Lube Oil Filter for EMD Locomotives
EMD Pt. no. 8340000, DLW Pt. no. 16240601
RDSO Spec. No. MP.0.2600-20, RDSO Test Programme No. MP.TP-23
400 3 (3 Loco set) Six months
17. Spin-on Fuel Filter for EMD locomotives
EMD Pt. no.8423132, DLW Pt. no. 16240390
RDSO Spec. No. MP.0.2600-19, RDSO Test Programme No. MP.TP-23
800 6 (3 Loco set) Six months
18. Spin-on turbocharger lube oil filter for EMD Locomotives
EMD Pt. no. 40035123, DLW Pt. no. 16240560
RDSO Spec. No. MP.0.2600-21, RDSO Test Programme No. MP.TP-23
400 3 (3 Loco set) Six months
19. Filter elements, Suction Strainer for EMD Locomotives
EMD Pt. no. 9324489, DLW Pt. no. 17454610 or RDSO Drg. No. SKDP-3675
- 100 10 (10 loco sets) One year
20. Filter Paper Media for 10” x 30” Long Life Lube Oil and Fuel Oil Filter Elements (Two Piece) for EMD Locomotives
- RDSO Spec. No. MP.0.2600-26, RDSO Test Programme No. MP.TP-23.
2400 18 (3 Loco sets) 190 days
21. Filter Paper Media for Long Life Lubricating Oil Filter Element for Locomotive Diesel Engines
- RDSO Spec. No. MP.0.2600-15.
4800 160 (20 loco sets) with CLOC
250 days with CLOC
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 8 of 31
22. Filter Paper Media for Low
Mean Pore Size Primary & Secondary Fuel Oil Filter Elements for Diesel Electric Locomotives
For manufacturing of filter elements set to RDSO Drg. No. SKDP-3901, 3902
MP.0.2600-25 600 locos sets
60 (30 loco sets) 190 days
For manufacturing of filter elements set to RDSO Drg. No. SKDP- 3908 & 3909
60 (30 loco sets) 100 days
23. Filter, Compressor oil spin on, for EMD locomotives
EMD Pt. no. 9311037, DLW Pt. no. 17480048 or RDSO Drg. No. SKDP-3685 and Pt. Drg. Nos. SKDP-3678, SKDP-3686, SKDP-3687, SKDP-3688, SKDP-3689, SKDP-3690, SKDP-3691, SKDP-3692, SKDP-3693
- 200 20 (20 loco sets) Six months
24. Filter elements, Pre-cleaner for WDG5 locomotives
EDPS – 436
100 loco sets 20 (10 loco sets) One year
Inertial Filter RH for WDG5 locomotives
DLW Pt. No. 17456710
Inertial Filter LH for WDG5 locomotives
DLW Pt. No. 17456708
25. Fuel filter element (5 micron) for WDG5 Locomotives
DLW Part No. 16050629 / Drg No. 40106208
- 08 02 Six months
26. Filter, Self cleaning Automatic, Lube oil, for ALCO locomotives
DLW Pt. no. 11664137 - 50 5 (5 loco sets) One year
Electrical Machines (DEMU Items) DEMU Items (For items that are similar in design and construction between Locomotives & DEMU, in case a vendor is already approved for similar item in locomotives, it may be granted same status in DEMU also, subject to successful completion of type test and field trial of the equipment. This is due to the logic that application in Locomotives is more severe as compare to DEMU. However, by the same logic, the reverse would not be admissible).
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 9 of 31
27. Three phase AC-AC transmission System & Associated Control equipment for 1600 HP Diesel Electric Multiple Unit
MP.0.24.00.45 10 Systems, Minimum life
proving criteria (MLPC) – 02
System for 3 years
04 Systems Six months
Electrical Machines (EMD Locomotive Items) 28. Alternator-Rectifier Traction for
HHP locomotives EMD Pt No. 40070737 for alternator & 40027895 for rectifier / DLW Pt No. 18020010 for alternator & 18021554 for rectifier
10 nos. for 36 months & minimum life proving criteria 2 nos. for 36 months (Also see Rly. Board’s letter no. 2007/M(L)/466/5(402) dt. 14.10.09)
10 nos. (Also see Rly. Board’s letter no. 2007/M(L)/466/5(402) dt. 14.10.09)
One year
29. Rectifier Bank Assembly for HHP Locomotives
EMD Part No 40027895, DLW Part No 18021554 or equivalent, Drawing No. 40027892-D
ETI-377, EDPS-314
10 sets for 36 months and minimum life proving criteria 2 sets for 36 months
20 nos. (10 pairs)
One year
30. Traction Alternator for EMD (WDG5) Locomotives
EMD Pt. no. / DLW Pt. no. 40170087 / 18022431
DLW PS no.WDG5/EM/001
10 nos. for 36 months & minimum life proving criteria 2 nos. for 36 months (Also see Rly. Board’s letter no. 2007/M(L)/466/ 5(4 02) dt. 14.10.09)
10 nos. (Also see Rly. Board’s letter no. 2007/M(L)/466/5( 402) dt. 14.10.09)
One year
31. Bearing suspension, Drive End of Traction Motor for EMD locomotives
EMD Pt No. 40072949/ DLW Pt No. 17400030
MP.0.2402.17 60 nos. each *
30 nos.
Six months
32. Bearing suspension, Non-Drive End of Traction Motor for EMD locomotives
EMD Part No. 40083493 / DLW Part No. 17400053
MP.0.2402.17 60 nos. each *
30 Nos. Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 10 of 31
33. Bearings, Traction Motor- for EMD locomotives
TM Drive end (DIN 43283-N 332-ECM-SRL 340-370-VA309)
60 nos. *
30 nos. Six months
TM Non-drive end (DIN 43283-6326-M/C5-VA309),
60 nos. *
30 nos. Six months
34. Bearing RLR CE for EMD (WDG5) locomotives
EMD Pt. no. / DLW Pt. no. 40114740 / 17456356
- 60 nos.* 30 nos. Six months
35. Bearing RLR PE for EMD (WDG5) locomotives
EMD Pt. no. / DLW Pt. no. 40114741 / 17456368
- 60 nos.* 30 nos. Six months
36. Bearing traction alternator for EMD locomotive
EMD Pt No. 9549071 60 nos. *
5 nos. Six months
37. 3-Phase Induction Motors for 4500 HP, AC- AC WDG4 & WDP4B Diesel Electric Locomotives
EMD Pt No 40071569 & 40086753 / DLW Pt No 18080017 & 18070036 and 18080080 & 18080091
MP.0.2400.52 60 nos. for 24 months & minimum life proving criteria 12 nos. for 24 months (Also see Rly. Board’s letter no. 2007/M(L)/466/5(402) dt. 14.10.09)
60 nos. (Also see Rly. Board’s letter no. 2007/M(L)/466/5(402) dt. 14.10.09)
Six months
38. 3- Phase squirrel cage induction motor for 5500 HP AC-AC WDG5 locomotive
EMD Pt. no. / DLW Pt. no. 40170048 / 18080110
Spec. No. MP.0.2400.72; STR No. MP.STR. EM.01.01.10.
60 nos. for 24 months & minimum life proving criteria 12 nos. for 24 months (Also see Rly. Board’s letter no. 2007/M(L)/466/ 5(4 02) dt. 14.10.09)
60 nos. (Also seeRly. Board’s letter no. 2007/M(L)/466/5( 402) dt. 14.10.09)
Six months
39. Axle Gear Steel (Carburizing Type)
Spec. No. EMS 157 120 Nos. 30 Nos. Six months
Gear – 90 teeth EMD / DLW Pt. no. 40074148 / 18440022
Gear – 77 teeth EMD / DLW Pt. no. 10662230 / 18440046
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 11 of 31
40. Pinion Gear Steel (43 B 17) Spec. No. EMS 81; STR No. MP.STR. EM.04.11.11
120 Nos. 30 Nos. Six months Pinion -17 teeth EMD / DLW Pt. no.
40074147 / 18440010 Pinion-17 teeth EMD / DLW Pt. no.
10662229 / 18440034 41. Tube Suspension: Housing
bearing kit (consisting 11 items) for EMD locomotives
DLW Pt No. 17454499 STR No. MP.STR. EM.01.01.12
250 sets 30 sets Six months
42. Tube Suspension: Housing bearing kit (consisting 4 items) for EMD locomotives
DLW Pt No. 17454487 STR No. MP.STR. EM.01.01.12
250 sets 30 sets Six months
43. E-Locker/Dustbin Motor Blower Assly for EMD (WDG5) Locomotives
EMD Part No. / DLW Part No. - 40170036/ 17456680 and 40177377/18090059)
DLW PS no. WDG5/EM/004
20 nos. 5 nos. Six months
Electrical Machines (BG ALCo Locomotive Items)44. Alternator Traction with
Auxiliary Machines and their sub-assemblies for Broad Gauge Diesel Electric ALCO Locomotives
MP.0.2402.19
A. Traction Alternator with Auxiliary Machines and their sub-assemblies for 3100HP and 3300HP ALCO Locomotives
30 5 nos. One year
B. Traction Alternator with Auxiliary Machines and their sub-assemblies for 1400HP and 2300HP ALCO Locomotives.
20 10 nos. Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 12 of 31
45. Bearing, roller type, of Traction motor, for ALCo locomotives, NH320 rivetless- commutator end, NU330 rivetless- Pinion end & alternator/generator bearings
MP.0.2402.03 Traction motors- 60 each type
* Alternator/Generator
- 60 nos. *
Traction motors- 30 nos. each type
Alternator/Gener
ator - 5 nos.
Six months
46. Bearings, Suspension, Traction Motor for ALCo locomotives (Roller type)
MP.0.2402.17 60 nos. each *
30 nos. Six months
47. Bearings for Traction motor, ALCo locomotives - (NU328 & NH318 rivetless)
MP.0.2402.03 60 nos. each * 30 nos. Six months
48. Traction motor Bellows- (Leather), for ALCo locomotives
For BG locos MP.0.2400.25 300 nos. 30 nos. Six months For MG locos MP.0.2400.29 300 nos. 30 nos. Six months
49. Traction Motor Bellows (Moulded Rubber Type without Fabric) used on Broad Gauge Diesel-Electric Locomotives
SKDP 3849 MP.0.2400. 22
200 nos. 30 nos. Six months
50. Flame Retardant 200ºC Fluoroelastomer Insulated Main Lead & Brush Gear Cables used in Traction Motors of Diesel Electric Locomotives
MP.0.52.00.08, 150 Motor sets (4 nos. cables either 150 mm2 or 200 mm2 taken as one motor set)
30 Motors Sets (4 nos. cables either 150 mm2 or 200 mm2 taken as one motor set)
Six months
51. Carbon blocks Following items not mentioned in latest Vendor List
As per manufacturer’s data sheet
Approval issued by Electrical Dte of RDSO vide note no. EL/2.2.70 dtd. 5.06.14, Spec. MP.0.2400.60
Nos. of carbon brush
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 13 of 31
i. TM165/ 165M/ 4906/ 4907/ GE 752 / C1001TM
WDM2, WDM3A, WDG3A, WDM3C & WDM3D
Do Do 7200
360 Six months
ii. TM5002AZ/ BW TM7362 (CGL)/ TM7362A
WDP1, WDP3A, WDP3DH, WDP3A,WDM3D
Do Do 7200 360 Six months
iii. TG 10931 AZ WDM2 Do Do 6000 300 Six months iv. TG 5301 BX WDM2 Do Do 6000 300 Six months v. TG
581/586A WDM2 Do Do 4000 200 Six months
vi. TG-5GT586 (GE)
WDM2 Do Do 4800 200 Six months
vii. TA 10105AZ, TA10106AZ, TA10102CW/DW, TA10102 EV
WDM2, WDM7, YDM6, WDP1, WDM3A, WDG3A, WDP3A, WDM3C & WDM3D
Do Do 400 20 Six months
viii. AG-51, AG-2513, AG-2501
WDM2, WDP1
Do Do 800 40 Six months
ix. AG-2702AZ WDM2 Do Do 800 40 Six monthsx. AG-3101 WDM3A,
WDG3A, WDP3A, WDM3C & WDM3D
-Do- -Do- 1800 90 Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 14 of 31
xi. AG-5GY27 (GE)
WDM2 -Do- -Do- 1200 200 Six months
xii. Exciter Alternator 5G7A6A1(GE)
WDM2 Do Do 400 20 Six months
xiii. TM-4303AZ/ BY/CZ/DY
1400HP DEMU
Do Do 3200 160 Six months
xiv. TM-2141 (CGL)
700HP DEMU
Do Do 3200 160 Six months
xv. DB Blower Motor 5GY90
WDM2 Do Do 800 40 Six months
xvi. DB Blower MotorDY3423
WDM2, YDM4
Do Do 800 40 Six months
xvii. Fuel Pump Motor
WDM2 Do Do 200 10 Six months
xviii Fuel Pump Motor ES-117 (ELGI)
WDM2, WDM3A, WDG3A, WDP1, WDM3C & WDM3D
Do Do 400 10 Six months
xix. Fuel Pump Motor5BC76 AB286 (GE)
WDM2 Do Do 200 10 Six months
xx. Crank Case Exhauster Motor ES-92 (ELGI)
WDM2, WDM3A, WDG3A, WDP1, WDM3C & WDM3D
Do Do 200 20 Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 15 of 31
xxi. Eddy Current Clutch-EC- 9005/2/M
WDM2, WDM3A, WDG3A, WDP1, WDM3C & WDM3D
Do Do 400 20 Six months
xxii. Clutch Gear 5DGY32A1
WDM2 Do Do 200 20 Six months
xxiii. Main Alternator (TA-17)
WDP4, WDG4 & WDP4B
Do Do 600 30 Six months
xxiv. Companion Alternator (CA-6)
WDP4, WDG4 & WDP4B
Do Do 400 20 Six months
xxv DB Grid motor
WDP4, WDG4 & WDP4B
Do Do 800 40 Six months
xxvi TM253AZ YDM4 Do Do 3200 160 Six months xxvii TM-GE-761 YDM4A,
WDM4 Do Do 3200 160 Six months
xxviii TG-10919AZ YDM4 Do Do 6000 300 Six months xxix TG-5GT-
740PAI YDM4A Do Do 6000 300 Six months
xxx TG-GT740PBI (Canadian GE)
YDM4 Do Do 6000 300 Six months
xxxi Exciter Auxiliary Generator(GM)
YDM4 Do Do 800 40 Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 16 of 31
xxxii Exciter Auxiliary Generator(GM)
YDM4 Do Do 800 40 Six months
xxxiii Crank Case Exhauster Motor
YDM4 Do Do 400 20 Six months
xxxiv Hasler Speedometer
DM2, YDM4
Do Do 400 20 Six months
52. Kapton Covered Copper Conductor for Traction Machines
MP-0-2400.24 44000 kgs 3300 kgs Six months
53. Film Polyimide (Kapton / Apical film or equilivant)
As per manufacturer’s data sheet
100 kg 30 kg Six months
54. Glass tape, Silicon elastomer As per manufacturer’s data sheet or spec. prepared by OEM DLW
2000 mtrs. / 100 motors
600 mtrs. / 30 motors
6 months
55. Motor Complete, DC Traction for ALCo locomotives with following sub-assemblies: A. Armature, B. Commutator C. Commutating field coils assembly, D. Main field coils assembly, E. Magnet frame (machined)
MP.0.2402.13 for Standard Motor, MP.0.2402.12 for Light Weight Motor
120 nos. 30 nos. Nine months
56. Motor Armature, DC Traction for ALCo
250 Motor Sets 30 Motor Sets Six months
57. Motor Commutator, DC Traction for ALCo
250 Motor Sets 30 Motor Sets Six months
58. Motor Commutating Field Coils assembly, DC Traction for ALCo
250 Motor Sets 30 Motor Sets Six months
59. Motor Main Field Coils assembly, DC traction for ALCo
250 Motor Sets 30 Motor Sets Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 17 of 31
60. Motor Magnet Frame (machined), DC Traction for ALCo
250 Motor Sets 30 Motor Sets Six months
61. Papers Nomex, Untreated of all grades
As per manufacturer’s data sheet
120 kg 36 kg Six months
62. Alternator-mounted Rectifier Assembly for AC/DC Diesel Electric Locomotives
MP.0.2402.20 Rectifiers complete- 30 nos.
Diodes- 1500 nos.
Rectifiers complete- 5 nos. Diodes- 180 nos.
Six months
63. Resins & Varnishes for Traction Machines used on Diesel Electric Locomotives
As per MPMI No. 153/92
Mica bonding for insulating tapes—4.5 x 6 = 27kg
1800 kg 135 kg Six months
Mica bonding for V - cone & segment--0.5 x 6 = 03 kg
200 kg 15 kg Six months
Laminating and coil moulding— 2.5 x 6 = 15 Kg
1000 kg 75 kg Six months
Putty for application behind commutator riser-2.5x 6 =15Kg
1000 kg 75 kg Six months
Putty/compound between split field coils and gaps at lead/coil turns— 2 x 6 = 12 Kg
800 kg 60 kg Six months
Impregnating (solvent less) varnish— 20x6=120 Kg
8000 kg 600 kg Six months
Impregnating (solvent less) varnish for Aux. M/cs----07x2 =14 Kg
2800 kg 70 kg Six months
Anti-tracking (finishing) Varnish---3 x 6 = 18 Kg
1200 kg 90 kg Six months
Anti-tracking (finishing) Varnish for AGs ---2.8 x 2 = 5.6 Kg
1120 kg 28 kg Six months
Epoxy based potting compound for field coils of TM 4601&4603 =6 x 6 = 36 Kg
2400 kg 180 kg Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 18 of 31
64. Cleaning Solvent for Electrical Rotating Machines of Diesel Electric Locomotives
MP.0.8000.01 20000 Litres
18 traction machines shall
be cleaned.
Successful execution of at
least 2 P.O. 65. Tape, Kapton adhesive As per manufacture’s data
sheet or spec. prepared by OEM / DMW
35000 m/ 100 motors 10500 m / 30 motors
Six months
66. Class 200 Resin-Pre-impregnated Semi-Cured Unidirectional Polyglass Banding Tapes used on Traction Machines (TG/TM/AG) of Diesel Electric Locomotives And DEMUs
MP.0.24.00.23 200000 m / 400 motors
15000 m/ 30 motors
Six months
67. Traction Gears, (Case hardened) for ALCo locomotives
Spec. No. MP.0.2800.17; STR No. MP.STR. EM.04.11.11
250 Nos. 30 Nos. Six months
68. Traction Pinion, (Case hardened) for ALCo locomotives
Spec. No. MP.0.2800.17; STR No. MP.STR. EM.04.11.11
300 Nos. 30 Nos. Six months
69. Tubes and accessories, Suspension bearing (10 components) For TM 4907 and TM 5002 of ALCo locomotives
As per drawings prepared by BHEL/CGL or by DMW/DLW
STR No. MP.STR. EM.01.01.12
250 sets
30 sets Six months
Electrical Machines (BG ALCo & EMD Locomotive Items) 70. Locomotive Power Cable –
Sizes AWG # 1 and Larger EDPS-304 14310 m 2385 mtrs. Six months
71. Locomotive Insulated Wire – Sizes AWG # 3 and Smaller
EDPS-179 51960 m 8660 mtrs. Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 19 of 31
Electrical Control Items 72. Nickel Cadmium Starter
batteries for Diesel Locomotives (6V, 150AH Ni Cd Storage Unit)
EMD drg. No. 10609375 MP.0.51.01.02 500 10 One year
73. Low Maintenance lead acid Batteries for Diesel Electric loco engine starting application (8 V, 500 Ah lead acid)
DEL/SPN/193 400 8 One year
74. Low Maintenance lead acid Batteries with PPCP Cell assembly housed in FRP outer container for Diesel Electric locomotives (8V, 450 Ah lead acid)
MP.0.24.00.65 400 8 One year
75. Microprocessor based Control system with Automatic Flasher Light Control, Multi-Setting Vigilance Control & Event Recorder for Diesel Electric locomotives (ALCO)
MP.0.2400.26
50 2 One year
76. AC-AC Traction Control System for 4500 HP HHP Diesel-Electric Locomotives
MP.0.2400.43 10 loco sets for 12 months & minimum life proving criteria 2 loco sets for 24 months (Also see Rly. Board’s letter no. 2007/M(L)/466/ 5(402) dt. 14.10.09)
10 loco sets (Also see Rly. Board’s letter no. 2007/M(L)/466/5(402) dt. 14.10.09)
Six months
77. Microcontroller based Event Recorder used on EMD Locomotive
MP.0.3700.12 50 5 One year
78. Governors MCBG Micro-controller based for ALCo/ DLW/ DMW
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 20 of 31
(A) Micro controller based governor (MCBG) for Application on ALCo/DLW/ DMW 16 cylinder 251 series D- E Locomotives
MP.0.1700.01 100 2 One year
(B) Micro controller based governor (MCBG) for Application on Micro-processor Controlled ALCo / DLW 6 cylinder 251 series WDS6 D- E Locomotives
MP.0.1700.04 50 2 One year
79. Master controller conventional stick type for ALCo locomotives
BHEL Drg. No. 25770030011 / DLW Pt No. 12130205
100 5 One year
80. Master Controller Improved stick type for ALCo locomotives
DLW Drg. no. EL/PT/0633 100 5 One year
81. Master Controller of EMD locomotive
EMD pt no. 40055299 / DLW pt no. 17050455
50 5 One year
82. Fuel Level Sensor for Diesel Electric Locomotives
MP.0.2400.63 50 5 One year
83. Micro controller based Electronic Speed indicating and Recording system for Railway application
MP.0.3700.07 100 5 One year
84. Distributed Power Control System for HHP Locomotives
-- MP.0.0400.02 ** 04 Loco Sets 12 months with minimum life proving criteria two locos for 24 months (Rly. Board ltr No. 2007/ M(L)/466/5(402) dt. 14.10.09)
04 loco sets Six months
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 21 of 31
85. Distributed Power Control System for Alco Locomotives
-- MP.0.0400.02 ** 04 Loco Sets 12 months with minimum life proving criteria two locos for 24 months (Rly. Board ltr No. 2007/ M(L)/466/5(402) dt. 14 10 09)
04 loco sets Six months
86. Auxiliary Power Unit for HHP Locomotives
-- MP.0.2400.64 ***** 50 Loco Sets 5 Loco Sets One year
87. Automatic Control of Engine Stop with Auxiliary Power Unit-ACES with APU for Alco locomotives
MP.0.2400.62***** 50 Loco Sets 5 Loco Sets One year
88. Remote Monitoring and Management of Locomotive and Trains
-- MP.0.0402.04 **** 50 Loco Sets 10 Loco Sets One year
89. Loco cab video and voice recording system
MP.0.0400.14. 100 10 Six months
Brake Items 90. Air Dryer, ALCO, HHP &
Electric locomotives and EMUs/DEMUs/MEMUs
Spec. no. MP.0.01.00.06; STR no. MP.STR. BK.01.06.11.
50 10 One Year
91. Gauge Complex with Air Flow Indicator, HHP Locomotives
EMD Pt No. 10631881 / DLW Pt No. 17452508
MP.0.01.00.32 100 10 One year
92. ‘L’ Type Composition Brake Block, ALCo & Electric Locomotives
SK.DP-3650 MP.0.01.00.04 10000 1500 One year
93. High Friction Composition Brake Block, HHP locomotives
SK-DP 3630 MP.0.0100.10 4800 300 One Year
94. Brake equipments, ALCo & Electric locomotivesS. No. Description Drg. No. Specn. No.
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 22 of 31
WABCO PC No. WABCO Test Spec. No.
(A) i. A-9 Auto brake valve 564140 T-2559-0 200 10 One year ii. SA-9 Ind. Brake valve 564141 T-2555-0 200 10 One year iii. C-2W relay valve with
5mm choke 579991 T-3439-0 100 10 One year
iv. C-2W relay valve with 6mm choke
579991 T-3439-0 100 10 One year
v. H-5 relay air valve 528561 T-1462-0 100 10 One year vi. HB-5 Relay air valve 549930 T-1976-0 100 10 One year vii. F-1 selector valve 557995 T-2428-0 100 10 One year viii. A-1 Diff. Pilot air valve 564940 T-2916-0 100 10 One year ix. HS-4 control Air valve 561128 T-2917-0 100 10 One year x. VA-1B Control air valve 564523 T-2918-0 100 10 One year xi. VA-1 Release valve 563510 T-2968-0 100 10 One year xii. MU-2B valve 564144 T-2655-0 100 10 One year xiii. D-1 pilot air valve
(modified) PD-2-20-7698 100 10 One year
xiv. 28 VB-control valve 563855 T-2630-0 100 10 One year xv. C3W Distributor valve
with control reservoirs 1903971308 100 10 One year
xvi. 24A-Double check valve 560504 T-2447-0 200 10 One year (B)
1. D-1 Emergency brake valve
564786, SKDP-3573 T-3267-0, MP.0.01.00.13
200 10 One year
2. J-1 Safety valve 558296, SKDP-3580 T-2463-0 MP.0.01.00.14
100 10 One year
3. N-1 Reducing valve 552238, SKDP-3582 T-1605-0 MP.0.01.00.15
100 10 One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 23 of 31
95. Microprocessor controlled Air Brake System / Modular Microprocessor controlled Air Brake System with advanced features / Indigenous Microprocessor controlled Air Brake System with versatile software
MP.0.01.00.20, MP.0.01.00.24, MP.0.01.00.23
50 1 Two years
96. Compact (Tri-plate) type IRAB-1 pure air brake and 28 LAV-1 dual brake panel for diesel Locomotives
MP.0.01.00.19
30 10 Two years
97. Air Compressor (Enhanced reliability and M-24 schedule), ALCo Locomotives
MP.0.0700.13
50 5 Two years
98. Water cooled Air Compressor for HHP Diesel Locomotives
SK.DP-3842 MP-0.07.00.14
50 3 Two years
99. Diaphragms, VA1B valve, ALCo locomotives
Small Diaphragm (VA-1B) SK.DP-3048 IRS-R48-88 & WABCO spec for WABCO Licensees
1000
100 One year
Large Diaphragm (VA-1B) SK.DP-3049 1000 100 One year 100. Rubber components, Air brake, ALCO locomotives - IRS-R48-88 & WABCO spec for WABCO Licensees
i. `O’ Rings SK.DP-3031 1000 100 One year ii. Port Gasket (VA-1B
Control Valve) SK.DP-3032 1000 100 One year
iii. Port Gasket (C2W) SK.DP-3033 1000 100 One year iv. Gasket (HS-4 Control
Valve) SK.DP-3034 1000 100 One year
v. Gasket (28-VB) SK.DP-3035 1000 100 One yearvi. Gasket (F-1 Selector
Valve) SK.DP-3036 1000 100 One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 24 of 31
vii. Gasket Ring (A-1 differential Pilot Air Valve)
SK.DP-3037 1000 100 One year
viii. Gasket Ring (H-5 & HB-5 Relay air valve)
SK.DP-3038 1000 100 One year
ix. Body Port Gasket (HB-5) SK.DP-3039 1000 100 One year x. Gasket Cover (VA-1
Release Valve) SK.DP-3040 1000 100 One year
xi. Check Valve (D-1&28VB Brake Valve)
SK.DP-3041 1000 100 One year
xii. Seal (VA-1& D-1 Emergency)
SK.DP-3042 1000 100 One year
xiii. Port Gasket between Body & Diaphragm Cover (H-5&HB-5)
SK.DP-3043 1000 100 One year
xiv. Seal with insert (D-1 Emergency, A9, C2W)
SK.DP-3044 1000 100 One year
xv. Gasket Check Valve Body Cover (H-5&HB-5)
SK.DP-3045 1000 100 One year
xvi. Gasket Check Valve Body (H-5&HB-5)
SK.DP-3046 1000 100 One year
xvii. Pipe Bracket Gasket for C2W
SK.DP-3047 1000 100 One year
xviii. Diaphragm (A9, SA9, HS4)
SK.DP-3052 1000 100 One year
xix. Diaphragm (C2W) SK.DP-3053 1000 100 One yearxx. Diaphragm(A-1 Differential) SK.DP-3054 1000 100 One year xxi. Diaphragm (H-5 & HB-5) SK.DP-3055 1000 100 One year xxii. Pipe Bracket Gasket (A9
& SA9) SK.DP-3056 1000 100 One year
xxiii. Gasket (F-1 Selector Valve)
SK.DP-3057 1000 100 One year
xxiv. Pipe Bracket Gasket (MU2B)
SK.DP-3058 1000 100 One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 25 of 31
xxv. Gasket Bottom Cover (F-1 Selector Valve)
SK.DP-3059 1000 100 One year
xxvi. Gasket (28-VB) SK.DP-3060 1000 100 One year xxvii. Piston Head Disc (WDM2
Loco) SK.DP-3061 1000 100 One year
xxviii. Piston Head Disc (YDM4 Loco)
SK.DP-3062 1000 100 One year
xxix. Cover Gasket (D-24B Feed Valve)
SK.DP-3063 1000 100 One year
xxx. Pipe Bracket Gasket (D-24B Feed Valve)
SK.DP-3064 1000 100 One year
xxxi. Gasket Ring (D-24B Feed Valve)
SK.DP-3065 1000 100 One year
xxxii. Gasket Ring (D-24B Feed Valve)
SK.DP-3066 1000 100 One year
xxxiii. Gasket Ring (D-24B Feed Valve)
SK.DP-3067 1000 100 One year
xxxiv. Ring (D-24B Feed Valve) SK.DP-3068 1000 100 One year xxxv. Small Diaphragm (28-VB) SK.DP-3050 1000 100 One year xxxvi. Large Diaphragm (28-VB) SK.DP-3051 1000 100 One year
101. Modified Hand Brake Assembly
SKDP-3947 for Alco locos SKDP-4089 for EMD locos
200 nos
20 nos. Six months
102. Spares for compressor / expressor, ALCO Locomotives
(A) 1. Oil seal (compressor) ELGI pt no. 000470500 / KPC pt no. 0965011050RDSO Drg. no. SKDP-3626
200 10 Two year
2. Piston- Diameter 140mm
ELGI pt no. 00021858c / KPC pt no. 0960150250
MP.0.07.00.03 100 5 Two year
3. Lube oil pump (gear driven type)
ELGI pt no. 07030011A / KPC pt no. 0960181650 RDSO Drg. no. SKDP-3442
100 5 Two year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 26 of 31
(B) Coolers (copper tube fin type cooling core with MS headers)
Inter cooler for expressor/ compressor
ELGI pt no. 070402560 & 00044726A / KPC pt no.0960171950
100 10 Two year
(C) Coolers (copper tube fin type cooling core with MS headers)
After cooler for compressor
ELGI pt no. A070053 / KPC pt no. 0965031250
100 10 Two year
(D) Face type Oil seal assembly with mating ring (Expressor)-
ELGI pt no. 000470300 / KPC pt no. 0950137200
SKDP-4072 200 10 Two year
(E) Piston- Diameter 197mm ELGI pt no. 000112040 / KPC pt no. 0950140150
200
10
Two year
103. Spares upgraded for compressor/expressor, ALCO Locomotives. 1. Air suction filter ELGI Pt. no. 070305120/
KPC Drg.No. 096.01.710.50 200 10 One year
2. Cylinders/Liners a) Diameter 197mm
ELGI Pt. no. 070304780 / KPC Drg.No. 095.00.404.51
200
10 Two year
b) Diameter 140mm ELGI Pt. no. 070304800 / KPC Drg.No. 096.01.507.51
100
5 Two year
3. Piston ring set a) Diameter 197mm
ELGI Pt. no. 022401079/KPC Drg.No. 096.50.450.50
200
10 Two year
b) Diameter 140mm ELGI Pt. no. 072403489/ KPC Drg.No. 096.50.451.50
100 5 Two year
4. Connecting rod big end bearings
Upper half
ELGI Pt. no. 070302180 /KPC Drg.No. 095.00.308.50
300 10 Two year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 27 of 31
Lower half ELGI Pt. no. 070302150 /KPC Drg.No. 095.00.307.50
300 10 Two year
5. Oil strainers/ screens ELGI Pt. no.070402560 &00044726A / KPC Drg. No.095.01.556.50
100 5 One year
6 Suction unloader Assembly
ELGI Pt. no. A070073 / KPCDrg. No. 096.00.563.50
600 10 Two year
7 Discharge Valve assembly
ELGI Pt. no. A070071 / KPCDrg. No. 096.50.433.50
600 10 Two year
8 Inlet Valve assembly ELGI Pt. no. A070072 / KPCDrg. No. 096.50.432.50
600 10 Two year
104. Air flow measuring Valve and Air flow Indicator, ALCo & Electric locomotives
Air Flow Measuring Valve SK-DP-2705 MP-1412/88 100 10 One year Air Flow Indicator WABCO Drg.No.C-76488,
Diesel Loco SK-DP-3523, Electric Loco SK.DP- 3510 & 3518
MP-1412/88 RDSO Insp. Plan No. MP: TP-14
100 10 One year
105. Air Flow Indicator for microprocessor Controlled brake on ALCo Locomotives
SKDP -3933
MP.0.01.00.33 100 nos. 10 nos. One year
106. Auto drain Valve, ALCo, EMDand Electric Locomotives
MP.0.01.00.26 200 10 One year
107. Feed Valve, ALCo, EMD and Electric Locomotives:
100 10 One year
108. Valve Emergency Brake for HHP locomotives
DLW drg. No. / Pt. no. 8136987 / 17390187
- 200 10 One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 28 of 31
109. Brake Interface Unit (BIU) for Train Collision Avoiding System and Distributed Power Control system for diesel locomotives fitted with IRAB class of brake system
Nil MP.0.01.00.31 30 10 Six months
Bogie Items 110. Bearing Adapter with Journal
Bearing Assembly (without bushing traction rod) for HHP locomotives
DLW Pt No. 17021170 360 2 loco sets of any type
One year
111. Journal Bearing ASM for WDG5 locomotives
DLW Pt. no. 17400065 / EMD Pt. no. 40169433
VTS No. 00273 360 Nos. 02 loco sets One year
112. Fabricated Bogie Frame & Bolster assembly for locomotives
- Spec. no. VL.Spec-6/ STR no. MP. STR- VL-02.02.11.
80 1 Loco set One year
113. Motor Nose Link Bushing for HHP locomotives
EMD Pt No. 40076633 / DLW Pt No 17452259.
240 5 loco sets One year
114. Nose Link Bushing for WDG5 locomotives
DLW Pt. no. 17272970 / EMD Pt. no. 40133146
VTS No. 00165 240 Nos. 05 loco sets One year
115. Bushing Rubber for HHP locomotives
EMD Pt No 40076807 / DLW Pt No 17452200
100 5 loco sets One year
116. Car Body Link Bushing for WDG5 locomotives
DLW Pt. no. 17455911 / EMD Pt. no. 40174155
VTS No. 00357 100 Nos. 05 loco sets One year
117. Bushing Traction Rod for HHP locomotives
EMD Pt No 40036366 / DLW Pt No 17452211
600 5 loco sets One year
118. Traction rod Bushing for WDG5 locomotives
DLW Pt. no. 17272932 / EMD Pt. no. 40172455
VTS No. 00352 600 Nos. 05 loco sets One year
119. Centre Pivot Block Assembly RDSO Drg. No SK.VL-501 (item no.2) / DLW Pt. no. 11276332
25 loco sets 5 loco sets One year
120. Hydraulic Dampers of WDG3A, WDM3D and WDM3A (with A.T.H.S bogies) locomotives:
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 29 of 31
(A) Hydraulic Damper SK.VL-295, SK.VL-328, SK.VL-471
MP.0.49.00.16 300 5 Loco set One year
(B)
WDM3D with equaliser -less bogie
SK.VL-387 MP.0.40.99.03 300
5 Loco set One year
121. Primary Vertical Damper for HHP locomotives
SK.VL- 484 MP.0.40.99.03 300 5 loco sets One year
122. Primary Vertical Damper for WDG5 locomotives
DLW Pt. no. 17455789 / EMD Pt. no. 40172452
VTS No. 00360 300 Nos. 05 loco sets One year
123. Secondary Yaw Damper for HHP locomotives
SK.VL- 484 MP.0.40.99.03 100 5 loco sets One year
124. Secondary Lateral damper for WDG5 locomotives
DLW Pt. no. 17455790 / EMD Pt. no. 40172454
VTS No. 00361 100 Nos. 05 loco sets One year
125. Equaliser beams, Compen-sating beams and Links of locomotive high adhesion bogies (i.e. HA) & Equaliser beams (long & short) of locomotive Trimount Bogies (i.e. Tri)
SK.VL-181, SK.VL-293 & 53.07.02;SK.VL-178
Spec. no. MP.0.4900.11; STR No. MP.STR.VL-01.01.06
800 (Equaliser and / or Compensating
beam)
2 loco sets of any type
One Year
126. Journal Axle Box Assembly with CRU bearing and Conical Thrust Pad
SK.VL-603 (refer S. No. 3); SK.DL-2308, SK.DL-2309.
Spec.no. MP-0.3600-01, STR No. MP.STR.BD.01.02.03;IRS R-63-76
360 for various loco applications.
2 loco set One Year
127. Journal Axle Box Assembly with normal and Step Size Roller Bearing and Conical Thrust Pad
SK.VL-603 (refer S. No. 1 & 2); SK.DL-2308, SK.DL-2309
Spec. no. MP-0.3600-01, STR no. MP.STR. BD. 01.02. 03; IRS R-63-76
360 for Co-Co bogies, 240 for Bo-Bo bogies for various loco applications.
2 loco set One Year
128. Centre Pivot Liner for Locomotives
SK.DL-3255, SK.VL-472 Spec. no. MP.0.40.99.02, STR no. MP.STR.VL.04.09.11
150 10 loco set One Year
129. Spring – Single Coil for HHP locomotives
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 30 of 31
a) Spring-Single coil for WDG4/WDM3D (With equaliser less bogie) locomotives
RDSO Drg. No SK.VL-750 / EMD Pt No. 40075318 / DLW Pt No.17410060
600
10 loco sets
One year b) Spring-Single coil for
WDP4 locomotives RDSO Drg. No SK.VL-751 / EMD Pt No. 40090911 / DLW Pt No.17410101
600
c) Spring-Single Coil for WDG4D locomotive
RDSO Drg. No SK.VL-755 / DLW Part no. 17410137 600
130. Coil Spring for WDG5 locomotives
DLW Pt. no. 17410125 / EMD Pt. No. 40172451
VTS No. 00274, EMS-71and EDPS-108
600 Nos. 10 loco sets One year
131. Rubber Spring Assembly–A for WDP4 locomotive
A- EMD Pt No. 40090677 / DLW Pt No. 17021121
100 10 loco sets One year
Rubber Spring Assembly–B for WDP4 locomotive
B- EMD Pt No. 40090678 / DLW Pt No. 17021133
100 10 loco sets One year
132. Rubber Spring Assembly for WDG4 locomotives
EMD Pt No. 40075328 / DLW Pt No. 17020293
200 10 loco sets One year
133. Secondary Spring for WDG5 locomotives
DLW Pt. no. 17272981 / EMD Pt. no. 40172453
VTS No. 00355 200 Nos. 10 loco sets One year
134. Thermoplastic polyurethane Spring Pads (Happy Pad) for locomotives
MP.0.40.99.01 1200 10 loco sets One year
135. Truck Frame Assembly for HHP locomotives
EMD Pt No 40074880 / DLW Pt No 17020189
50 1 loco set One year
136. Half Cylinder Wear for HHP locomotives
RDSO Drg. No. SK.VL-705, EMD Pt No 40075177/ DLW Pt No 17453458
Spec no. MP.0.40.99.02, STR no. MP.STR.VL.04.09.11
100 5 loco sets One year
137. Kit for TBU for WDG5 locomotives
DLW Pt. no. 17456216 VTS No. 00363 300 Nos. 05 loco sets One year
138. Thrust Pad for WDG5 locomotives
DLW Pt. no. 17272956 / EMD Pt. no. 40162354
VTS No. 00317 200 Nos. 05 loco sets One year
ISO 9001: 2015 Documents No. MP-M-8.1-1 Version No 1.0 Date effective: 14.09.18Document title: Master List of Qualifying Quantity for up-gradation to approved vendors and Qualifying Quantity & Qualifying Periods for Approval for RDSO vendor for developmental order of items controlled by MP Directorate
SSE/MP Dir/MP-VDG Printed: 07-08-18 Prepared by Issued by Page 31 of 31
139. Lateral Thrust Pad for WDG5 locomotives
DLW Pt. no. 17272968 / EMD Pt. no. 40162459
VTS No. 00317 100 Nos. 05 loco sets One year
140. Secondary lateral stop for WDG5 locomotives
DLW Pt. no. 17455777 / EMD Pt. no. 40168997
VTS No. 00291 100 Nos. 05 loco sets One year
Under-frame Items 141. Buffer Assembly, Side, high
capacity, Long Life SK.DL-4561, SK.DL-4725, SK.DL-4748.
MP.0.41.00.03 30 loco sets 20 (5 loco sets) One year
142. Coupler Assembly, H type Tight lock for ALCo / Electric / HHP Passenger Locomotives
MP.0.41.00.05 30 loco sets 10 (5 loco sets) One year
143. Coupler E-type for EMD locomotives
EMD Pt Nos. 10632625 & 10661402 / DLW Pt Nos. 17451103 & 17454505
Spec. no. 56-BD-07, STR no. QMS- 10:2015
30 loco sets 10 (5 loco sets) One year
144. Draft Gear Soft with Yoke Assembly
MP.0.41.00.06 30 loco sets 10 (5 loco sets) One year
145. Draft gear with Yoke assembly for EMD locomotives
EMD Pt Nos. 8420236 & 8439090 / DLW Pt Nos. 17451115 & 17454530
30 loco sets 10 (5 loco sets) One year
146. Spring Pads Assembly, Side Buffer, Long life
SK.DL-4726 MP.0.41.00.07
30 loco sets 20 (5 loco sets) One year
147. Spring Rubber, Buffer SK-DL- 4565 MP.0.41.00.04 30 loco sets 80 (5 loco sets) One year
Note: * The qualifying period (Up-gradation to approved vendors) for these items shall be with 18 months field trial. ** These specifications are under revision. *** As per clause 17.0 of spec, Extensive filed trials shall be carried out on one or two proto types or as decided by IR. The proto
type shall be subjected to at least 6 months before clearance is given for bulk supply. This unit is combination of various important sub assemblies consisting of engine, alternator and compressor, battery charger, etc and in itself a mini power plant. It is felt that the performance of at least five APU sets should be watched for one year to establish the product reliability.
**** REMMLOT involves two major systems Viz, LRMS and LTMS, which need to be integrated and data has to be effectively formatted with user friendly software. The needs software configuration and various iterations to ensure effectiveness and online data availability. Hence, it is felt that the performance need to be watched for one year on 10 units.