PK 56502 | 62002 EH ROBUST HEAVY DUTY CRANE … · PERFECT DIMENSIONS Technical data * Optional...
Transcript of PK 56502 | 62002 EH ROBUST HEAVY DUTY CRANE … · PERFECT DIMENSIONS Technical data * Optional...
ROBUST HEAVY DUTY CRANE TECHNOLOGY AND MATURE ELECTRONICS ARE GUARANTORS FOR LONG-LIFE CYCLE
PK 56502 | 62002 EH
PROFITABLE HEAVY-DUTY CRANE TECHNOLOGY• Maximum utilisation of the working range thanks to HPSC
• High operator friendliness thanks to radio remote control
• Additional applications with Power Link Plus
• Shorter load cycle times thanks to High Speed Extention
• High value retention due to coating technology
2
3
FIRST-RATE IN DESIGN AND PERFORMANCE
Power Link PlusHigh variety of uses
With the 15-degree reverse linkage system, you can reach through low door openings and also work inside buildings. Heavy crane work – even in difficult conditions.
Low-maintenance extension systemReduces service time
With sliding elements made of synthetic material and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.
Coating technologyTop quality surface protection at a glance
The KTL coating lays the foundation for a perfect surface protection. Afterwards the components are either coated in the powder-coating facility or are finished with a two-components-topcoat. High value retention and excellent corrosion protection for the whole life of a crane.
HPSCMaximum utilisation of the working range
The variable stabiliser positioning of the High Performance Stability Control System makes it possible to utilise the lifting capacity to the maximum. It enables working within tight spaces.
PAL 50Comfort and safety
The PALTRONIC 50, PALFINGER offers the latest control electronics for the series production crane. The custom designed electronic operates and monitors the crane and offers more efficiency in use and safety.
Control consoleAll information at a glance
All important information about the crane can be seen on the main control stand. Ergonomic control levers and the optional lighting package provide increased safety and comfort even in poor visibility conditions.
High Speed ExtensionFor efficient assignments
The High Speed Extension speeds up the extension boom system. Crane works faster and more efficiently.
Functional designPractical and attractive
Robust plastic covers protect crane parts against dirt and damage. Better appear-ance and increased operational comfort – during the entire lifetime.
Radio remote controlDialogue with the operator
PALFINGER radio remote controls are quipped with linear lever or cross lever and provide the greatest possible comfort for the operator. All EH models with LED-Display inform the crane operato.4
PERFECT DIMENSIONS
Technical data
* Optional features / country-specific equipment
DIMENSIONS
PK 56502 PK 62002 EH Max. lifting moment 52.2 mt/512.0 kNm 377600 ft.lbs 57.8 mt/567.0 kNm 418160 ft.lbsMax. lifting capacity 20200 kg/198.2 kN 44530 lbs 22200 kg/217.8 kN 48940 lbsMax. hydraulic outreach 16.2 m 53‘ 2’’ 16.2 m 53‘ 2’’Max. manual outreach 23.1 m 75‘ 9‘‘ 23.1 m 75‘ 9‘‘Slewing angle 370 ° 370 °Slewing torque 6.6 mt/65.0 kNm 47940 ft.lbs 6.6 mt/65.0 kNm 47940 ft.lbsStabiliser spread 7.8 m 25‘ 7‘‘ 7.8 m 25‘ 7‘‘Fitting space required (min./max.) 1.60 m/1.71 m 5‘ 3‘‘/5‘ 7‘‘ 1.60 m/1.71 m 5‘ 3‘‘/5‘ 7‘‘Width folded 2,55 m 8‘ 4‘‘ 2.55 m 8‘ 4‘‘Max. operating pressure 320 bar 4640 psi 350 bar 5075 psiRecommended pump capacity from 70 l/min 18.5 US gal./min from 80 l/min 21.1 US gal./min to 80 l/min 21.1 US gal./min to 100 l/min 26.4 US gal./minDead weight (std.) 5130 kg 11310 lbs 5130 kg 11310 lbs
***
5
15°
max 19500kg
(S507–SK–E)
DTS507SGA/04
0300
01/2011PK 56502 CPK 56502
11.5m
9.4m
7.5m
5.7m
4.0m12200kg
8600kg
6500kg
5100kg
4200kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
(S507–SK–E)
DTS507SGA/04
0500
01/2011PK 56502 EPK 56502
max 17700kg
16.1m
13.9m
11.7m
9.6m
7.7m
5.9m
4.2m11300kg
7900kg
5900kg
4600kg
3750kg
3100kg
2650kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
18m
20m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m 14m 16m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabeKonstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
HIGH PERFORMANCE
CB
D E
PK 56502
15°
max 19800kg
(S507–SK–E)
DTS507SGA/04
0200
01/2011PK 56502 BPK 56502
9.4m
7.5m
5.7m
4.0m12400kg
8800kg
6700kg
5400kg
0m0m
2m
4m
6m
8m
10m
12m
14m
0m
–2m
–4m0m 2m 4m 6m 8m 10m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
(S507–SK–E)
DTS507SGA/04
0400
01/2011PK 56502 D
PK 56502
13.8m
11.6m
9.5m
7.6m
5.8m
4.1m
8200kg
11700kg
6200kg
4850kg
3950kg
3300kg
0m0m
4m
2m
8m
10m
6m
12m
18m
14m
16m
0m
–4m
–2m
max 18500kg
0m 4m 14m10m6m2m 8m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
6
CB
D E
HIGH PERFORMANCE
15°
max 21900kg
(S507–SK–E)
DTS507SHA/04
0200
01/2011PK 62002–EH B
PK 62002–EH
9.4m
7.5m
5.7m
4.0m13800kg
9800kg
7500kg
6000kg
0m0m
2m
4m
6m
8m
10m
12m
14m
0m
–2m
–4m0m 2m 4m 6m 8m 10m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
max 21500kg
(S507–SK–E)
DTS507SHA/04
0300
01/2011PK 62002–EH C
PK 62002–EH
11.4m
9.4m
7.5m
5.7m
4.0m13500kg
9600kg
7200kg
5700kg
4700kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
15°
(S507–SK–E)
DTS507SHA/04
0400
01/2011PK 62002–EH D
PK 62002–EH
13.8m
11.6m
9.5m
7.6m
5.8m
4.1m
9200kg
13000kg
6900kg
5400kg
4450kg
3750kg
0m0m
4m
2m
8m
10m
6m
12m
18m
14m
16m
0m
–4m
–2m
max 20400kg
0m 4m 14m10m6m2m 8m 12m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacit
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
15°
(S507–SK–E)
DTS507SHA/04
0500
01/2011PK 62002–EH E
PK 62002–EH
max 19600kg
16.1m
13.9m
11.7m
9.6m
7.7m
5.9m
4.2m12600kg
8900kg
6700kg
5200kg
4200kg
3500kg
3000kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
18m
20m
0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m 14m 16m
TypeModelModell PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabeKonstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20° Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20° main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20° et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacit
PK 62002 EH
7
KP-H56/62002EM2+EN
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes. PALFINGER.COM