Pivotfold 25 - Keeler Hardware

ISSUE 2 DATA SHEET D70 Product improvement is a continuous process. Please check specification at time of purchase. Application Suitable for residential and light commercial pivot folding partitions, with all panels of equal width. Panels can fold to one or both sides of the opening. Pivot hardware enables an end folding interior shutters to be designed using standard width panels with no cutting down of the panel adjacent to post. To cover any width opening, any number of folding units can be used. Door Specification Pivotfold 25 2400mm 25kg 900mm 35-50mm Track System: For Individual Panels: Max Panel Height Max Panel Weight Max Panel Width Min Panel Thickness Pivotfold 25 units of up to six panels can be pivoted to each side of the opening. End folding floating units consist of four or six panels. Shutter panels should be constructed to provide secure fitting for the pivot sets, hangers, hinges and guides. Pivotfold 25 For Top Hung Interior Pivot Folding Partitions. Max 25kg Each Standard Fitting Packs 120 Aluminium, Mill or Clear Anodised 2000mm, 3000mm, 4000mm and 6000mm 1SS/250 57EN 57ENP 21EP 21EPNC 106E/94 282SS 94A 94B 94PPA Aluminium - Mill or Clear Anodised 2000mm, 3000mm, 4000mm and 6000mm Flush Pulls, Flush Bolts and 6200 Series Mortice Locks PVD Brass, Satin Nickel & Polished Nickel Hardware Specification Track: Material Standard Lengths Bracket (Face Fix): Bracket 316 Stainless Steel A bracket is located close to the pivot with a bracket 300mm away to support track where folding units stack. Place a bracket at the other end of the track, at each join in the track and space the other brackets at 900mm maximum centres. Hangers: End & Intermediate Alternative Hanger Hangers are fitted with nylon tyre wheels on ball race bearings. Vertical adjustment is simple and positive. Pivot Set: Top and bottom pivots Two Door Pivot - No Channel Guide: With precision bearings All steel parts to hangers, pivots and guides are stainless steel Hinge: Butt hinge Channels: Aluminium Brass Polypropylene & Aluminium Finish Standard Lengths Accessories: Finish Contents One 57 ENP hanger, one 106E/94 guide, six 282SS hinges, all screws and fitting instructions. One pivot assembly, one 57ENP hanger, Pack one 20DS door stop, three 282SS hinges, all screws and fitting instructions. One pivot assembly, one 57ENP hanger, one 20DS door stop, one 106E/94 guide, three 282SS hinges, all screws and fitting instructions. One pivot assembly, two 57ENP hanger, one 20DS door stop, two 106E/94 guide, nine 282SS hinges, all screws and fitting instructions. One Pivot assembly, three 57ENP hanger, one 20DS door stop, three 106E/94 guide, fifteen 282SS hinges, all screws and fitting instructions. Pack No. PF25-APK 2 Door Add-on Pack PF25-2PKNC 2 Door No Channel PF25-2PK 2 Door Pack PF25-4PK 4 Door Pack PF25-6PK 6 Door Pack ®

Upload
others
Category

Documents
view
4
download
0

Embed Size (px):

Transcript of Pivotfold 25 - Keeler Hardware

Issue 2 DATA sHeeT D70 Product improvement is a continuous process. Please check specification at time of purchase.

ApplicationSuitable for residential and light commercial pivot folding partitions, with all panels of equal width.

Panels can fold to one or both sides of the opening.

Pivot hardware enables an end folding interior shutters to be designed using standard width panels with no cutting down of the panel adjacent to post.

To cover any width opening, any number of folding units can be used.

Door SpecificationPivotfold 25

2400mm25kg900mm35-50mm

Track System:For Individual Panels:Max Panel HeightMax Panel WeightMax Panel WidthMin Panel Thickness

Pivotfold 25 units of up to six panels can be pivoted to each side of the opening.End folding floating units consist of four or six panels. Shutter panels should be constructed to provide secure fitting for the pivot sets, hangers, hinges and guides.

Pivotfold 25 For Top Hung Interior Pivot Folding Partitions. Max 25kg Each

Standard Fitting Packs

120Aluminium, Mill or Clear Anodised2000mm, 3000mm, 4000mm and 6000mm

1ss/250

57eN57eNP

21eP21EPNC

106E/94

282ss

94A94B94PPAAluminium - Mill or Clear Anodised2000mm, 3000mm, 4000mm and 6000mmFlush Pulls, Flush Bolts and 6200 Series Mortice LocksPVD Brass, Satin Nickel & Polished Nickel

Hardware SpecificationTrack: MaterialStandard LengthsBracket (Face Fix):Bracket 316 Stainless SteelA bracket is located close to the pivot with a bracket 300mm away to supporttrack where folding units stack. Place a bracket at the other end of the track, ateach join in the track and space the other brackets at 900mm maximum centres.Hangers:End & IntermediateAlternative HangerHangers are fitted with nylon tyre wheels on ball race bearings. Vertical adjustment is simple and positive.Pivot Set:Top and bottom pivotsTwo Door Pivot - No ChannelGuide:With precision bearingsAll steel parts to hangers, pivots and guides are stainless steelHinge:Butt hingeChannels:AluminiumBrassPolypropylene & AluminiumFinishStandard LengthsAccessories:Finish

Contents One 57 ENP hanger, one 106E/94 guide, six 282SS hinges, all screws and fitting instructions.One pivot assembly, one 57ENP hanger, Pack one 20DS door stop, three 282SS hinges, all screws and fitting instructions.One pivot assembly, one 57ENP hanger, one 20DS door stop, one 106E/94 guide, three 282SS hinges, all screws and fitting instructions.One pivot assembly, two 57ENP hanger,one 20DS door stop, two 106E/94 guide, nine 282SS hinges, all screws and fitting instructions.One Pivot assembly, three 57ENP hanger, one 20DS door stop, three 106E/94 guide, fifteen 282SS hinges, all screws and fitting instructions.

Pack No.

PF25-APK 2 Door Add-on Pack

PF25-2PKNC 2 Door No Channel

PF25-2PK 2 Door Pack

PF25-4PK 4 Door Pack

PF25-6PK 6 Door Pack