Piping interface management workflow.xls
1
Piping Interface Management - Workflow related to SECAD as engineering database Issue P&ID 0-issue and fluid list START OF PROCESS Draft P&ID 1st issue with proper pipe classes and interface numbers Issue Pipe Class Manual, incl. list of pipe classes (added to fluid list) and assign pipe classes to fluid list and 0-issue P&ID Issue equipment technical specifications for each procurement lot with clear description of each mechanical interface Piping specification engineer to issue Piping Interface List according to attachment 2 for interfaces external of Plant Engineering Release P&ID and assign process data in SECAD P&ID transfer to SECAD Assign 3D pipe classes and order execution in SECAD and issue piping list Create 3D specifications in SECAD Pipe Classes added to 0-issue P&ID Place PO to equipment supplier Receive and review supplier mechanical data and check interfaces against equipment technical specification Piping and arrangement design Adapt piping according to P&ID and 3D pipe class, update equipment model according to MD- issues, add P&ID interface no's and equip. doc.-no. + rev. to PDMS UDA's Pipe Class Manual Piping List List "Design of Piping" Pipe Class Manual Arrangement group to issue GA-drawing(s), showing the position of external piping interfaces and referencing to the Piping Interface List Issue GA-drawings and piping interface list with the agreed interface specification END OF INTERFACE PROCESS PCM + fluid list with added pipe classes interfaces mutually agreed yes no P&ID fluid list P&ID 0-issue consistency between P&ID, MD, PDMS yes no END OF 3D-PROCESS Mechanical Equipment & Systems Arrangement & Piping Alstom internal participants (HRSG, ST, GT, generator, condenser, ADV, FWT) to issue interface lists Interface definition phase Interface Implementation phase distribute to all participants Interface List HRSG, GT/ST Piping Interface List equipment mechanica l data 3D model LE A&P to include scope definition with colors on the P&ID
-
Upload
prashant-agrawal -
Category
Documents
-
view
6 -
download
2
Transcript of Piping interface management workflow.xls
Piping Interface Management - Workflow related to SECAD as engineering database
Issue P&ID 0-issue and fluid list
START OF PROCESS
Draft P&ID 1st issue with proper pipe classes and interface
numbers
Issue Pipe Class Manual, incl. list of pipe classes (added to
fluid list) and assign pipe classes to fluid list and 0-issue
P&ID
Issue equipment technical specifications for each
procurement lot with clear description of each mechanical
interface
Piping specification engineer to issue Piping Interface List
according to attachment 2 for interfaces external of Plant
Engineering
Release P&ID andassign process data in SECAD
P&ID transfer to SECAD
Assign 3D pipe classes and order execution in SECAD and
issue piping list
Create 3D specifications in SECAD
Pipe Classes added to 0-issue P&ID
Place PO to equipment supplier
Receive and review supplier mechanical data and check
interfaces against equipment technical specification
Piping and arrangement design
Adapt piping according to P&ID and 3D pipe class, update equipment model according to MD-issues, add P&ID
interface no's and equip. doc.-no. + rev. to PDMS UDA's
Pipe Class Manual
Piping List
List "Design of Piping"
Pipe Class Manual
Arrangement group to issue GA-drawing(s), showing the position of external piping
interfaces and referencing to the Piping Interface List
Issue GA-drawings and piping interface list with the agreed
interface specification
END OF INTERFACE PROCESS
PCM + fluid list with added pipe classes
interfaces mutually agreed
yes
no
P&ID
fluid list
P&ID 0-issue
consistency between P&ID, MD, PDMS
yes
no
END OF 3D-PROCESS
Mechanical Equipment & Systems Arrangement & Piping
Alstom internal participants (HRSG, ST, GT, generator,
condenser, ADV, FWT) to issue interface lists
Inte
rfac
e de
finiti
on p
hase
Inte
rfac
e Im
plem
enta
tion
ph
ase
distribute to all participants
Interface List HRSG, GT/ST
Piping Interface List
equipment mechanical data
3D model
LE A&P to include scope definition with colors on the P&ID
