Pipelines & Utilities › wp-content › uploads › 2013 › 07 › Terram... · Standard texts...

Pipelines &Utilities

3

Extruded mesh and tape products are used in pipeline and utility projects to protect,identify, locate and warn of proximity.

Flexible mesh products are used in major pipeline projects to replace the thick sand collarthat would traditionally have been placed to cushion the protective coating around asteel pipe.

Sand is a primary resource and is not always available locally to an overland project. Evenwhen it is, its bulk means there is a heavy environmental price to pay for its transportation.Sand requires plant for installation and it is difficult to place consistently around a pipe. Apolymeric mesh is more compact to transport and it can be installed relatively quicklyand with consistency. As with sand, the mesh prevents stone in the backfill from abradingand puncturing the pipe’s coating which would otherwise interrupt the cathodic protectionsystem.

Ancillary items include cable covers, marker plates and signs.

Mesh products, tapes and ancillaryitems for pipeline and utility projects

Why Fiberweb Geosynthetics Ltd and Terram products?

Fiberweb plc established Fiberweb Geosynthetics Ltd after the acquisition of BoddingtonsInternational Ltd in 2010. The resulting portfolio includes the products for pipeline andutility projects which were historically associated with Boddingtons. The UK manufacturingcapability is being expanded and centralised at Maldon in Essex.

Fiberweb Geosynthetics Ltd provides a unique range of value-engineered solutionsthat also help minimise the environmental impact of construction. With unrivalledexpertise and experience in geosynthetics, accumulated over a 40 year period sinceTerram was first launched, the Company remains committed to the development ofinnovative and cost-effective geosynthetic solutions.

The Company intends to lead the market in the design and manufacture of innovativegeosynthetics, and continue to provide ground-breaking solutions - the next generationof Terram products.

Root Guard

Protectamesh™HD Rockshield is a new thick pipelineprotection mesh manufactured by Fiberweb Geosyntheticsfor protecting pipeline coatings from rock backfills.Protectamesh™HD cushions the impact of rocks whichcan cause damage to the pipe coating and result in thecorrosion of the pipeline and is essential for projectswhere pipelines are constructed through rocky terrain.

Protectamesh™HD Rockshield Pipe protection mesh

4

Protectamesh™HD is a three dimensional bi-planarextruded diamond structured mesh manufacturedfrom low-density polyethylene. Protectamesh™HDoffers protection from abrasive objects afterinstallation, prohibiting geologic movements fromdamaging your pipeline.

Mesh thickness of 10mm (0.40”)

Supplied in widths 1.22m, 1.53m or1.83m (4ft, 5ft or 6ft)

Can be supplied in rolls or in pads for easyinstallation (cut pieces)

Black or Yellow colours available

Flexible for easy handling at low temperature

Chemically inert

Porous mesh structure allows water flowfor cathodic protection and testing

High impact resistance to ASTM G13 MOD

High impact strength and tensile strength

Up to half the weight of alternatives

Protectamesh™ HD is essential where pipelines areconstructed through rocky terrain.

Protectamesh™ HD protects the pipes anti-corrosion coating.

Root Guard

5

Protectamesh™ used to protect the pipeline from theconcrete saddle weights.

Protectamesh™ absorbs any movement between thepipe and the concrete saddles.

WIDTH THICKNESSg/m2

UNIT WEIGHTlb/ft2

COLOUR

1.22m (4ft)

1.22m (4ft)

1.53m (5ft)

1.53m (5ft)

1.83m (6ft)

1.83m (6ft)

10mm (0.40”)

10mm (0.40”)

10mm (0.40”)

10mm (0.40”)

10mm (0.40”)

10mm (0.40”)

1500

1500

1500

1500

1500

1500

0.32

0.32

0.32

0.32

0.32

0.32

Black

Yellow

Black

Yellow

Black

Yellow

APERTURE(Diamond structure)

4mm x 4mm (0.16” x 0.16”)

4mm x 4mm (0.16” x 0.16”)

4mm x 4mm (0.16” x 0.16”)

4mm x 4mm (0.16” x 0.16”)

4mm x 4mm (0.16” x 0.16”)

4mm x 4mm (0.16” x 0.16”)

PRODUCT DETAILS

Protectamesh ™

HD is flexible evenat sub-zero temperatures

Available in black or yellow

Lightweight

Cost effective

Manufactured to withstandextreme weather conditions,hot to cold

Protects pipe coating fromprotruding rocks

Available in rolls or pads

Minimises abrasion ofcoating from pipemovement underground

Root Guard

Rockshield Pipe protection mesh

Rockshield meshes are manufactured from high densitypolyethylene, and are designed to act as a shield againstimpact damage from rocks during backfilling, ensuring theprotective coatings on the pipes are not damaged.Rockshield meshes can be used where metallic pipes areinstalled in rocky terrain, or in areas where soil movementis a possibility.

ProductRoll Size

(feet)Roll Size

(m) g/m2

Unit Weightlb/ft2

Max pipe diameter forlongitudinal wrappingColour

BRS 1, 2

BRS 3

BRS 5, 6, 7

BRS 11

BRS 12

BRS 13

BRS 15

1.5 x 20

1.0 x 20

2.0 x 24

1.0 x 30

1.54 x 30.48

1.84 x 30.48

1.65 x 20

4.9 x 65.6

3.28 x 65.6

6.5 x 78.7

3.28 x 98.4

5 x 100

6 x 100

5.4 x 65.6

750, 950, 1200

1200

1200, 950, 750

600

560

560

950

0.154, 0.195, 0.246

0.246

0.246, 0.195, 0.154

0.123

0.115

0.115

0.195

Black

Black

Black

Black

Black

Black

Black

430mm

270mm

585mm

270mm

440mm

535mm

475mm

16.9 in.

10.6 in.

23 in.

10.6 in.

17.3 in.

21 in.

18.7 in.

The polyethylene mesh can incorporate a blowing agent toproduce a strong cellular cushioning structure offeringmaximum protection against rock impact damage duringbackfilling operations and protruding rocks in the trench.Chemically inert, the mesh will not rot and the open meshstructure allows water to flow around the pipe ensuringcathodic protection is not affected.

Various grades of mesh are offered to produce a rangeof solutions to meet the most demanding conditions.A wide range of alternative grades can be manufacturedto your specification subject to a minimum orderquantity. Rockshield mesh can be manufactured invarious roll sizes and cut pieces, with widths up to 2.5mwide and in various lengths. Custom mesh structuresand roll sizes can be manufactured to suit individualrequirements subject to minimum order quantities.

Technical Specifications

6

High resistance to compression, tearing and wearing

Adaptable to all pipeline sizes

Chemically inert

Light, flexible and easy to install in 3 different ways

Durable without the loss of the cushioning characteristics

Unaffected by temperature extremes and wet weather

Maintains cathodic protection without inhibiting cathodic flow

Root Guard

All rolls should be of adequate coverage to entirely cover the circumference of the pipe.

PROTECTAMESH is to be placed around pipe, whereby placing overlap portion at the 6 o’clockposition of the pipe.

Place all end to end overlaps min. 50mm/ 2”; all parallel pad overlaps min 150mm/ 6”.

In the event that a side overlap is used place the overlaps “shingle style”. This will ensure that no backfill will protrude underthe PROTECTAMESH

After pads are secured to the pipe, the backfill process may take place.

ROLLS

Sizing your pipe - for ProtectameshPIPE DIAMETER PIPE CIRCUMFERENCE PAD SIZE

7

Rockshield Application Diagram

Custom cut pads should be wrapped around thecircumference of the pipe, covering all exposedareas. Ensure that all pads are of sufficientdimension to protect the entire pipe.

All pad overlaps shall be placed at the 6 o’clockposition of the pipe, taking care to securethe PROTECTAMESH with a polypropylene banding.

Place all end to end overlaps min. 50mm/ 2”; allparallel pad overlaps min.150mm/ 6”.

All pads shall be secured to the pipe by using a min.18mm/ 0.7” wide polypropylene banding.

After pads are secured to the pipe, the backfillprocess may take place.

PADS

Section View

50mm / 2”

100mm / 4”

150mm / 6”

200mm / 8”

250mm / 12”

305mm / 12”

355mm / 14”

405mm / 16”

455mm / 18”

510mm / 20”

560mm / 22”

610mm / 24”

660mm / 26”

710mm / 28”

760mm / 30”

815mm / 32”

865mm / 34”

915mm / 36”

1065mm / 42”

1220mm / 48”

157mm / 6.3”

315mm / 12.3”

472mm / 25.1”

629mm / 25.1”

786mm / 31.5”

960mm / 37.75”

1100mm / 43.9”

1270mm / 50.2”

1430mm / 56.5”

1605mm / 62.8”

1760mm / 69”

1915mm / 75.3”

2075mm / 81.6”

2230mm / 87.9”

2390mm / 94”

2560mm / 100.5”

2720mm / 106.75”

2875mm / 113”

3350mm / 131.8”

3835mm / 150.7”

300mm / 12”

450mm / 18”

600mm / 24”

750mm / 32”

900mm / 36”

1100mm / 44”

1250mm / 45”

1400mm / 54”

1550mm / 60”

1750mm / 67”

1900mm / 72”

2050mm / 80”

2200mm / 98”

2350mm / 92”

2500mm / 98”

2700mm / 104”

2850mm / 111”

3000mm / 117”

3500mm / 136”

3950mm / 155”

Root Guard

Utilitape™

Underground Warning Tape

Utilitape™ is the most economical way of warningexcavators of buried services below ground. Our tapescan be printed with any text in any language, any colourand any size, manufactured to your specifications.Standard texts are available ex-stock.

Special manufacture available

Premium & Economy grades available

Material - High quality linear low density polyethylene.

Lead free pigments with virgin grade film. Soil tolerance from-pH 2.5 to pH 11.0 inclusive

Premium grade manufactured in accordance with ENATS 12-23 Issue 2 : 2004

Various thicknesses of polyethylene available.

TEXT/COLOURS SIZE PART No. TEXT/COLOURS SIZE PART No.

CAUTION CAUTION CAUTIONWATER PIPE BELOW

CAUTION CAUTION CAUTIONFIBRE OPTIC CABLES

CAUTION CAUTION CAUTIONFOUL SEWER BELOW

CAUTION CAUTION CAUTIONGAS MAIN BELOW

CAUTION CAUTION CAUTIONSEWERAGE PUMPING MAIN BELOW

CAUTION CAUTION CAUTIONSTREET LIGHTING CABLE BELOW


CAUTION CAUTION CAUTIONELECTRIC CABLE BELOW

CAUTION CAUTION CAUTIONGAS MAIN BELOW


CAUTION CAUTION CAUTIONWATER PIPE BELOW

150mm x 0.1mm x 365mtrs








004126

002146

002467

002344

006168

005468

005444

004867








004805

002405

006045

004928

003662

005161

005482

PREMIUM GRADE

ECONOMY GRADE





004102

002047

002443

002320





004843

004782

006144

045006

CAUTION CAUTION CAUTIONROAD DUCT BELOW

CAUTION CAUTION CAUTIONTELEPHONE CABLE BELOW

CAUTION CAUTION CAUTIONTRAFFIC SIGNAL CABLE BELOW

FIN DRAIN

CAUTION•ELECTRIC CABLE BELOW

CAUTION CAUTION CAUTIONCCTV CABLE BELOW

CAUTION CAUTION CAUTIONOIL PIPELINE BELOW

CAUTION CAUTION CAUTIONFIBRE OPTIC CABLES

CAUTION CAUTION CAUTIONFOUL SEWER BELOW


CAUTION CAUTION CAUTIONTELEPHONE CABLE BELOW

• Special manufacture available any colour size or language


Root Guard

8

Utilitnet™

Underground Warning Mesh

Utilinet™ underground warning mesh is an excellentwarning device for underground buried services. Thisbrightly coloured mesh has a middle strip that can beprinted with a warning message for easy recognitionon excavation. Manufactured and tested to BS EN12613:2001.

Manufactured from virgin homopolymer polypropylene

Custom printed texts can be manufactured to your requirements subject to minimum order quantities

Standard texts available ex-stock

Packed in a polythene bag forstorage and protection

Available in any size, colour or language to your specifications.

150mm x 365mtrs

150mm x 365mtrs

150mm x 365mtrs

150mm x 365mtrs

150mm x 365mtrs

PPH

PPH

PPH

PPH

PPH

003648

050925

050932

050949

050956

CAUTION - ELECTRIC CABLE BELOW

CAUTION - WATER MAIN BELOW

CAUTION - GAS MAIN BELOW

CAUTION - FOUL SEWER BELOW

CAUTION - FIBRE OPTIC CABLE BELOW

PRODUCT TEXT/COLOUR SIZE MATERIAL PART NO.

In-houselaboratory

crate test toconform to

BS EN 12613:2009

BS EN 12613:2009 is a European wide directive that specifies thewarning characteristics for all underground warning devices.This scope covers electric cables and pipelines containingpressurised or non-pressurised fluids.

Underground Warning mesh is manufactured to the EuropeanStandard and has been independently tested and approved. Ourown in-house crate test and laboratory ensure consistent qualityand standards are maintained to conform to BS EN 12613:2009.

Copies of test reports are available.

EUROPEAN STANDARD


Root Guard

9

Wavelay®

Detectable Tape

Wavelay® is a highly visible and detectable warning tape.Used with standard cable and pipe locators for the location ofnon-metallic pipes and un-energised cables. Wavelay is laidhalfway between the pipe or cable and the surface of thetrench during backfilling.

Used with standard cable and pipe locators for thelocation of non-metallic pipes and un-energised cables.Laid halfway between the pipe or cable and the surface ofthe trench during backfilling.

Rust free stainlesssteel tracer wires

Coloured tape withprinted message

Wires in constant contact with earth

Clear PE film

Other texts/colours manufactured to order

Unique design allows wires to stretch by over 25before breaking

Top ‘Printguard’ layer protects the wires and thewarning message.

Detectaccessories available for joining detectablewires

Available in sizes from 50mm – 300mm

Rolls available with side flanges for laying from aplough

• Special manufacture available in any colour, size, text orlanguage to your specifications

Technical SpecificationsTEXT/COLOUR SIZE PART NO.

150mm x 100m 015986CAUTION COMMUNICATIONSPOWER CABLE BELOW

10

DetectaccessoriesTo ensure a continuous signal along the mesh it is important to use our wire crimpsand crimping tool. This gives the join sufficient strength to cope with most backfills. If it is not installed correctly then the signal may not pass from join to join.

Technical SpecificationsPRODUCT QUANTITY PER PACK PART NO.

Crimping Tool 1 043385

Stainless Steel Wire Crimps 100 043347

Root Guard

Mesh manufactured to BS EN 12613:2009

Bagged for storage and protection

Various colours available

Crimps and crimping tool available

Bespoke texts manufactured to order

Sizes 100mm-500mm (subject to MOQ’s)

Detectamesh®

Detectable Mesh

Detectamesh® is a high strength coloured rot resistanthomopolymer polypropylene mesh incorporating a trace-able stainless steel wire or aluminium foil, andoverprinted with a warning message in black. Laid halfwaybetween the pipe or cable and the surface in theback-filled trench, Detectamesh® is used with standardpipe and cable locators for the location of non-metallicunderground buried services.

DetectaccessoriesTo ensure a continuous signal along the mesh it is important to use our wire crimpsand crimping tool. This gives the join sufficient strength to cope with most backfills. If it is not installed correctly then the signal may not pass from join to join.

Technical SpecificationsPRODUCT QUANTITY PER PACK PART NO.


Stainless Steel Wire Crimps 100 043347

11

Printed Top Tape

Mesh Structure

Detectable Steel wire

• Special manufacture available any colour, size or language

STANDARD TEXTSTEXT/COLOUR SIZE PART NO. TEXT/COLOUR SIZE PART NO.

CAUTION-WATER MAIN BELOW

CAUTION-WATER MAIN BELOW

CAUTION - STORM WATER CULVERT BELOW

CAUTION-BURIED GAS PIPE

CAUTION•ELECTRIC CABLE BELOW

CAUTION-FIBRE OPTIC CABLES

RAW WATER MAIN BELOW

Caution: Sewer Below

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

016747 - (Wire)

016761 - (Ali/foil)

016846 - (Wire)

016167 - (Wire)

016181 - (Wire)

017263 - (Wire)

045969 - (Wire)

017508 - (Wire)

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

200mm x 100m

017584 - (Wire)

017607 - (Wire)

017621 - (Wire)

017645 - (Wire)

017683 - (Wire)

017669 - (Wire)

017126 - (Wire)

016082 - (Wire)

CAUTION-FIRE MAINS BELOW

CAUTION-SEWERAGE PUMPING MAIN BELOW

CAUTION-GRAVITY SEWER BELOW

CAUTION-PRESSURE SEWER BELOW

CAUTION-NON POTABLE WATER MAIN BELOW

CAUTION-FUEL PIPE BELOW

CAUTION-TELEPHONE CABLE BELOW

CAUTION-STREET LIGHTING CABLE BELOW

Root Guard

To ensure a continuous signal along the mesh it is important to use our ultra crimps andcrimping tool. This gives the join sufficient strength to cope with most back fills. If it is notinstalled correctly then the signal may not pass from join to join.

Ultra-strong®

Detectable Tape

A strip of detectable aluminium foil totallyencapsulated between a polyethylene base layer and aprinted polyethylene protective covering (patentNo.2231448).

Polyethylene sealing layer with printedwarning message (0.1mm)Aluminium Foil Detectable Laminate (0.1mm)

Base layer of polyethylene(0.45mm)

Aluminium Foil Detectable Marker Tape

Available in any colour & copy text Not less than 99.5% purity aluminium foil High tensile strength Totally encapsulated aluminium foil prevents corrosion Tensile strength - 50Kg/100mm width - 75Kg/150mm width Extended product life

A printed coloured plastic strip of detectable aluminiumfoil tape, permanently bonded between two layers of rotresistant plastic to prevent corrosion and increase itstensile strength.

Available in many colours.

All 50mm tapes are boxed in dispenser cartons. Easily located by direct connection Continuous metallic tracer element

Detectaccessories

PRODUCT QUANTITY PER PACK PART NO.


Ultra Crimps 5 043361


12

Root Guard

PE Cable Protection Covers

Heavy duty, yet lightweight recycled polyethylenecable covers, incorporating a coloured printedpolyethylene warning tape laminated to the topsurface. Our environmentally friendly cable coversshould be laid over high voltage power cables orother buried services which require additionalprotection.

13

All cable covers are pre-drilled and supplied with a joiningpeg for easy installation. The linear length when joined isapproximately 960mm.

Other texts are available including fibre optic cables,electric cables, gas pipelines and water pipelines.

Specially printed texts and other sizes of cable cover canbe manufactured to order on request, subject to quantity.

High impact resistance, manufactured to BS 2484

Rot resistant

Lightweight, meaning low transportation and installation costs

Available from 6mm to 18mm thick

Special manufacture available


PRODUCT TEXT/COLOUR SIZE MATERIAL PART NO.

150mm x 6mm x 1m Recycled LDPE 019304



Water, Gas and Fibre Optic cable covers can be manufactured to order

Root Guard

TapeTile™

Protection Warning Mesh

14

Our cable and pipe TapeTile™, offers far greaterprotection than ordinary warning tape. TapeTile™ is veryeconomically priced and installation time is greatly re-duced as it is easy to transport and simple to unroll. Var-ious thicknesses are available with colours and texts toyour requirements.

Heavy duty recycled low density polyethylene sheetwith a warning tape laminated on oneside, printedin black.

More protection than a standard warning tape

Reduced installation time

Manufactured in accordance with ENATS 12-23 Issue : 2004

Various thicknesses available from 1mm upwards

Tensile strength - >10N/mm2

Elongation at Break - >300%

200mm x 2.5mm x 40m150mm x 2.5mm x 40m

018444018420

TEXT/COLOURS PART NO.SIZE



UPVC Cable CoversRigid UPVC cable covers with or without interlockingfasteners, profiled to provide good protection abovecables or pipelines, against the high impact ofshovels or picks.

Manufactured in any colour with a warning messageto identify the buried service, printed in black to yourrequirements.

Permanent non-fading, colour resistant to chemical change.

Density is higher than water, so that they can be used easily in water-logged ground.

Lightweight, meaning low transportation and installation costs

Other thicknesses and sizes available on request.

Width (mm) 120 150 160 180 200 220 240 250 300Thickness(mm) 2 2 2 2 2 2 2 2 2Length (m) 1 1 1 1 1 1 1 1 1Weight/Cover(g) 350 450 480 520 575 635 710 720 880Pallet Qty 2000 2000 2000 2000 1500 1500 1500 1500 1500

SIZES AVAILABLE

Root Guard

Maxigrid™

Utility Protection Mesh

Maxigrid™ Utility Protection Mesh is manufactured fromhigh density polyethylene and offers excellent protectionto buried services. It is usually supplied in roll form inlengths of 50 metres.

High impact resistance

Each roll is bagged for protection

Average tensile strength of filament 100newtons per filament

Excellent chemical resistance to - Sulphuric Acid, Hydrochloric Acid, Ammonia, Sodium Hydroxide, Volatile Oil, Sea Water, Acetone, Toluene and Benzene

An underground warning tape can be laminated to thetop surface if required. This warning tape can be printedwith your unique warning message and contact details.


400mm x 3mm x 50m

600mm x 3mm x 50m

1500mm x 3mm x 50m

Orange

Yellow

Red

017720

015900

044351

PRODUCT & COLOUR SIZE COLOUR PART NO.

Root Guard

15

Luran-S Snap fit SignsUtility Marker Plates

Our marker plates are manufactured from LURAN-Splastic, and offer an efficient, economic and versatilesystem to mark fire hydrants, water valves, sewers,gas valves and street lighting columns in a clear andcoherent format.

Made from non-ageing, non-fadingLURAN-S plastic

Manufactured to BS3251

Information is displayed by using numeric/lettered snap fit inserts

Inserts simply clip and lock into the plate

Plates can be fitted directly onto walls, fences andlamp posts, or alternatively mounted onto concrete,aluminium or fibre glass posts, all available from stock

Aluminium and Plastic backing plates are alsoavailable for additional security

Plates can be specially hot-stamped with texts &symbols to display additional information

16

Identification SignsID Signage Plates

Plastic Screen Printed SignsManufactured to any size, colour or text as required

Manufactured from durable PMMA foam

Printed in multiple colours to your design

Stable solutions in many colours and formats

Printed areas are coated to extend shelf life

Weather and UV resistant

Fixing holes can be added to your requirements

Highly resistant inscription suitable for indoorand outdoor applications

Can be designed toand shaped to fit anybespoke profile

Can be customised toyour size or colour

UV stabilised andweather resistant

Signs are coloured rightthrough limiting fading

InjectionMoulded Signs

Laser Engraved Signs

TraffolyteEngravedSigns

Text and symbols are engravedonto a different coloured co-extruded plastic

Weather and chemical resistant– suitable for external use

Extremely accurate engravingallows the use of barcode systems

Available in many sizesand colours

Manufactured from multi-coloured traffolyte plastic

Available in a variety of sizes and colours

Low order quantity

Accurate engraving forbespoke signs andschematic drawings

17

A plastic plate used to mark the correct level or position of the track.The plate is attached to a fixed object such as a platform or abridge.

Each plate is manufactured from a durable plastic ’Luran S’ andis supplied with a red/green block & slider and spaces for securitysnap fit inserts.

Plate size: 140mm x 200mm

We can also provide steel, aluminium and plastic backing platesfor secure fitting.

Each plate requires 12 x Snap fit 40mm inserts and 4 x 10minserts which we can provide at an extra cost.

Aluminium Marker PostsID Signage

A high quality aluminium post with screw fixing channel,bituminised end, earth anchor and plastic top sealer. Foradditional security an aluminium backing plate isavailable, which can also be used for mounting platesonto fences & lamp posts by either screw or strap &buckle fixing.

Screwanchor

Earth anchor

Lightweight and easy totransport

Tough and durable

Rust free and corrosionresistant

Screw and earth anchorsavailable

Other sizes available.Posts can also be finished in blue or yellow

Complete system available - easy to install

Aluminium Post

Aluminium Backing Plates

48mm x 1.5m high

205mm x 180mm

034703

034628

PRODUCT SIZE PART No.


Railway Datum Gauges

18

A full range of product data sheets, case studies and projectinformation request forms are available from Terram technicalsupport or as downloads from the Terram website. www.terram.com.

TECHNICAL SUPPORT

The information contained herein is, to the best of ourknowledge, accurate in all material respects. However, sincethe circumstances and conditions in which such informationand the products mentioned herein can be used may varyand are beyond our control, no representation or warranty,express or implied, of any nature whatsoever is or will be

made and no responsibility or liability is or will be acceptedby us, any of our affiliates or our or their respective directors,officers, employees or agents in relation to the accuracy orcompleteness or use of the information contained herein orany such products and any such liability is expressly disclaimed.

DISCLAIMER

Fiberweb Geosynthetics LtdBlackwater Trading Estate

The Causeway, MaldonEssex CM9 4GGUnited Kingdom

tel +44 (0) 1621 874200fax +44 (0) 1621 874299 email [email protected]

www.terram.com

FM 22730

Pipelines & Utilities › wp-content › uploads › 2013 › 07 › Terram... · Standard texts...

Documents

Transcript of Pipelines & Utilities › wp-content › uploads › 2013 › 07 › Terram... · Standard texts...