Pipe Support Cobalch

Cobalch ApS ● Hejreskovvej 24B ● DK-3490 Kvistgård ● Denmark ● Tel.: +45 4582 0533 ● Fax.: +45 4582 0118 Danske Bank: 4130 4130088031 ● IBAN - DKK: DK3130004130088031 - EUR: DK4730004130088228 ● Swift code: DABADKKK CVR nr. DK70614316 ● [email protected] ● www.cobalch.com

3.9.1.1

PIPE SUPPORTS


3.9.1.2

On the following pages we present our pipe supports manufactured in accordance with the SSG Standard which encompasses the full range of hangers, guides, supports and brackets for piping systems. All products except springs are delivered hot-galvanised as standard. The standard is intended for use with piping in accordance with the dimension range DN 10-600 as stated below. Stainless steel pipes, max 200° C - Rigid thermo-plastic pipes Unalloyed steel pipes, max 200° C - Resin-plastic pipes The standard has been developed by the Swedish Forest Industry's Technical Installation Group, SSG, which is a co-operative organisation for the Swedish forest industry, and in collaboration with certain major pipe manufactured.

SSG 7149

Bmin = 2/3 H £ = 18 ± 0,25°

Fs Fs

Fs

Fs FG

85

H

B

The drawings are not standardised. Only stated measurement, function and strength information is standardised.

DN 40 50 80 100 125 150 200 250 300 350 400 500 600 Min. Length (sliding shoe) 100 100 150 150 150 150 300 300 300 300 400 400 400

Permitted load kN (FG,FS) 2 2 4 4 7 7 10 15 20 25 35 40 40

Permitted side load kN 1) 0,6 0,6 1,2 1,2 2,1 2,1 3 4,5 6 7,5 11 12 12

Rated load 1,5 x FS

1) Permitted side load at sliding shoe is -30% of permitted load. For the rating test load is applied to the centre for the pipe. Application of the load and support shall not be torque rigid. Residual deformation is not permitted. For guides, the direction of force shall be at right angles to the guide surface (Fs) and for sliding supports at a diagonal. During load rating testing of sliding supports a restrainer clip shall be employed as the boundary on one side

Lower edge of pipe


SSG 7025 Type PE

SSG 7075

Dy

H

SSG 7050

3.9.1.3

PIPE SUPPORTS SSG STANDARD SSG 7005

Type 1 Designation: Hanger SSG 7005 Type and variant - Dy - H Example.....: Hanger SSG 7005 Type 1 A - Dy 203 - H 900 Dim. range 10-600

Type 2 Designation: Hanger SSG 7005 Type and variant - Dy - H - L1 - L2 Example.....: Hanger SSG 7005 Type 2 A - Dy 88,9 - H 900 - L1 1000 - L2 800 Dim. range 40-600

Type 3 Designation: Hanger SSG 7005 - Type and variant - Dy - H + Stop lug SSG 7100 - Type - Number Example.....: Hanger SSG 7005 - Type 3 A - Dy 203 - H 900 + Stop lug SSG 7100 - Type B - 4 pcs. Dim. range 40-600

Type 4 Designation: Spring hanger SSG 7005 - Type - Dy - H - Spring basket No Example.....: Spring hanger SSG 7005 - Type 4 - Dy 203 - H 900 - No 500 Dim. range 25-600

Variant B Variant A

SSG 7025 Typ PD

SSG 7025 Typ PB

SSG 7075

Dy

H

Variant A Variant B

SSG 7025 Typ PG

SSG 7025 Typ PF

SSG 7076

SSG 7030

L2

L1

H

Coil spring are available as follows: No. 1,5 for max. load 150 kp No. 3 for max. load 300 kp No. 5 for max. load 500 kp No. 8 for max. load 800 kp No. 14 for max. load 1400 kp No. 20 for max. load 2000 kp No. 30 for max. load 3000 kp

Variant A Variant B Variant C Variant D

SSG 7025 Typ PB

SSG 7025 Typ PD

SSG 7025 Typ PD

SSG 7025 Typ PB

SSG 7125

SSG 7130

SSG 7075

SSG 7125

Dy

H

SSG 7100

Distance between hangers only SSG 7250


Variant B

3.9.1.4


Type 5 Designation: Spring hanger SSG 7005 - Type and variant - Dy - H - Spring basket No Example.....: Spring hanger SSG 7005 - Type 5 A - Dy 203 - H 900 - No 500 Dim. range. 25-600

Type 6 Designation: Spring hanger SSG 7005 - Type and variant - Dy - H - Spring basket No - L1 - L2 Example.....: Spring hanger SSG 7005 - Type 6A - Dy 88,9 - H 900 - No 150 - L1 1000 - L2 800 Dim. range 40-600

Type 7 Designation: Spring hanger SSG 7005 - Type and variant - Dy - H - Spring basket No - L1 - L2 Example.....: Spring hanger SSG 7005 - Type 7 A - Dy 88,9 - H 900 - No 150 - L1 1000 - L2 800 Dim. range 40-600

Variant B Variant A

SSG 7025 Typ PC SSG 7025

Typ PA

SSG 7050 Dy

H

Dy

SSG 7075

SSG 7076

SSG 7050

SSG 7025 Typ PK

SSG 7050

SSG 7050

SSG 7025 Typ PH

H

L2

L1

Variant A

Variant B Variant A Variant B Variant A

Type 8 Designation: Spring hanger SSG 7005 - Type and variant - Dy - H - Spring basket No - L1 - L2 Example.....: Spring hanger SSG 7005 - Type 8 A - Dy 88,9 - H 900 - No 150 - L1 1000 - L2 800 Dim. range 40-600

SSG 7076

SSG 7025 Typ PH

SSG 7030

SSG 7025 Typ PH

SSG 7025 Typ PC

SSG 7025 Typ PA

L1

L2 L2

L1

H H

SSG 7025 Typ PB

SSG 7025 Typ PD

SSG 7076

SSG 7030

SSG 7050 SSG

7050

SSG 7055

SSG 7050


3.9.1.5


Type 9 Designation: Spring hanger SSG 7005 - Type and variant - Dy - H - Spring basket No+ Stop lug SSG 7100 - Type - Number Example.....: Spring hanger SSG 7005 - Type 9 A - Dy 203 - H 900 - No 300 + Stop lug SSG 7100 - Type B - 2 pcs. Dim. range 40-600

Type 10 Designation: Spring hanger SSG 7005 - Type and variant - Dy - H - Spring basket No + Stop lug SSG 7100 - Type - Number Example.....: Spring hanger SSG 7005 - Type 10 - AA Dy 203 - H 900 - No 300 + Stop lug SSG 7100 - Type B - 2 pcs. For pipes DY > 43

Type 11 The standard for sliding support Type 11 encompasses two types, 11 A and 11 B. Sliding support type 11 A is intended for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. The standard for type 11 A states only principle requirements for design which allows for various slide supports design. See SSG 7149. Sliding support type 11 B is intended for insulated piping S< 200° C. The drawing is not standard. For pipes Dy < 610

Type 11 A Sliding support for non-insulated, protective insulated and insulated pipes with max 80 mm thick insulation. Designation: Sliding support SSG 7005 - Type - Dy - Material Example.....: Sliding support SSG 7005 - Type 11 A - Dy 154 Information on material and surface threatment plus required height, length and permitted load is provided in SSG 7149.

Variant A Variant B

SSG 7050

Dy

H

Dy

SSG 7125

SSG 7050

SSG 7025 Typ PE SSG 7025

Typ PE


H

SSG 7130

SSG 7125

SSG 7075

SSG 7130

SSG 7125

SSG 7075

SSG 7125

SSG 7100

SSG 7050

SSG 7050

SSG 7025 Typ PC

SSG 7025 Typ PA

SSG 7025 Typ PC

SSG 7025 Typ PA

Variant BC Variant AC BA AA



3.9.1.6

PIPE SUPPORT SSG STANDARD SSG 7005

Type 11 B Sliding support for pipes Designation: Sliding support SSG 7005 - Type and (variant 1) - Dy - (L1 - £°)1) Example.....: Sliding support SSG 7005 - Type 11 BK - Dy 154 For pipes Dy ≤ 196

For pipes Dy > 196 To insulate the interior of the sliding support insert a covering aluminium plate between the angle bars and fill the space created with insulation.

Type 12 The standard for sliding support Type 12 encompasses two types, 12 A and 12 B. Sliding support type 12 A is intende for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. The standard for type 12 A states only principle requirements for design which allows for various slide support designs. See SSG 7149. Slide support type 12 B is intended for insulated piping S< 200° C. Type 12 A Sliding support for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. Designation: Sliding support SSG 7005 - Type - Dy - Material + Restraining clips SSG 7155 - Type A Example.....: Sliding support SSG 7005 - Type 12 A - Dy 154 + Restraining clips SSG 7155 - Type A The drawing is not standard. Type 12 B Sliding support for insulated pipes. Designation: Sliding support SSG 7005 - Type and (variant1) - Dy (L1 - £°)1) + Restraining clips SSG 7155 - Type Example.....: Sliding support 7005 - Type 12 BK - Dy 154 + Restraining clips SSG 7155 - Type A

1) Is only indicated by deviation from standard.


SSG 7151 Typ NK

SSG 7151 Typ NL

SSG 7151 Typ O

SSG 7076 45°

£°

45°

£° L1 L1 L1

Dy Dy

SSG 7076 Variant K Variant L

Variant K Variant L

45° 45°

£° £°

L1 L1 L1

SSG 7151 Typ NK

SSG 7151 Typ NL

Dy Dy

SSG 7151

Typ O

SSG 7076 SSG

7076

SSG 7155

SSG 7155


3.9.1.7


Type 13 The standarden for guide Type 13 encompasses two types, 13 A and 13 B. Guide type 13 A is intended for non-insulated, proctive insulated and insulated piping max 80 mm thick insulation. The standard for type 13 A states only principle requirements for design which allows for various slide support designs. See SSG 7149. Guide type 13 B is intended for insulated piping S < 200° C. Type 13 A Guide for non-insulated, protective insulated and insulated piping with med max 80 mm thick insulation. Designation: Guide SSG7005 - Type - Dy - Material Example.....: Guide SSG 7005 - Type 13 A - Dy 154 The drawing is not standard.

For pipes Dy < 610 Information on material and surface treatment plus required height, lenght and permitted load is provided in SSG 7149.

Type 13 B Guide for insulated pipes. Designation: Guide SSG 7005 - Type - Dy - (L1 - £°)1) Example.....: Guide SSG 7005 - Type 13 B - Dy 154 For pipes Dy ≤ 196 For pipes Dy > 196

To insulate the interior of the sliding support insert a covering aluminium plate between the angle bars and fill the space created with insulation.

45°

£°

45°

£° L1

SSG 7151 Typ NL

SSG 7151 Typ NL

Dy

45°

£° L1

SSG 7151 Typ O

SSG 7151 Typ O

Dy



3.9.1.8


Type 14 The standard for guide Type 14 encompasses two types, 14 A and 14 B. Guide type 14 A is intended for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. The standard for type 14 A states only principle requirements for design which allows for various slide support designs. See SSG 7149. Guide type 14 B is intended for insulated piping S < 200° C. Type 14 A Guide for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. Designation: Guide SSG7005 - Type - Dy - Material Example.....: Guide SSG 7005 - Type 14 A - Dy 154 The drawing is not standard.

For pipes Dy < 610 Information on material and surface treatment plus required height, length and permitted load is provided in SSG 7149.

Type 14 B Guide for isolated pipes. Designation: Guide SSG 7005 - Type - Dy - (L1)1) Example.....: Guide SSG 7005 - Type 14 B - Dy 154 For pipes Dy ≤ 196 For pipes Dy > 196

To insulate the interior of the sliding support insert a covering aluminium plate between the angle bars and fill the space created with insulation.


45° 45°

L1 L1

Dy Dy

SSG 7151 Typ NL

SSG 7151 Typ NS SSG

7151 Typ OS

SSG 7151 Typ O

45°


3.9.1.9


Type 15 The standard for guide Type 15 encompasses two types, 15 A and 15 B. Guide type 15 A is intended for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. The standard for type 15 A states only principle requirements for design which allows for various slide support designs. See SSG 7149. Guide type 15 B is intended for insulated piping S < 200° C. Type 15 A Guide non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. Designation: Guide SSG7005 - Type - Dy - Material Example.....: Guide SSG 7005 - Type 15 A - Dy 154 The drawing is not standard.

For pipes Dy < 610 Information on material and surface treatment plus required height, lenght and permitted load is provided in SSG 7149.

45°

45°

45°

L1 L1

Dy Dy

SSG 7151 Typ NL

SSG 7151 Typ NS

SSG 7151 Typ OS

SSG 7151

Typ OS


Type 15 B Guide for isolated pipes. Designation: Guide SSG 7005 - Type - Dy - (L1)1) Example.....: Guide SSG 7005 - Type 15 B - Dy 154 For pipes Dy ≤ 196 For pipes Dy > 196

The sliding support is by isolation furnished inside with a covering aluminium plate between the angle bars.


3.9.1.10


Type 16 Guide for isolated pipes. Designation: Guide SSG 7005 - Type - Dy (L1 - £°)1) + Stop lug SSG 7100 - Type - Number Example.....: Guide SSG 7005 - Type 16 B - Dy 154 + Stop lug SSG 7100 - Type B - 4 pieces For pipes Dy ≤ 196 For pipes Dy > 196

To insulate the interior of the sliding support insert a covering aluminium plate between the angle bars and fill the space created with insulation. 1) Is only indicated by deviation from standard. Type 17 Type 17 A Spring guide for non-insulated or protective isolated pipes. Type 17 B Spring guide for isolated pipes. Designation: Spring guide SSG 7005 - Type - Dy - H - Spring basket No - (L1 - £°)1) Example.....: Spring guide SSG 7005 - Type 17 A - Dy 154 - H 900 - No 3 Typ 17 A Typ 17 B For pipes Dy ≥ 75 For pipes Dy ≤ 196 A-A

45°

£°

SSG 7100

SSG 7160

Guide SSG 7005 Typ 13 A

Guide SSG 7005 Typ 13 B

45°

£°

Dy

L1

H



3.9.1.11


Type 18 Type 18 A Spring guide for non-isolated or protective isolated pipes. Type 18 B Spring guide for isolated pipes. Designation: Spring guide SSG 7005 - Type - Dy - H - Spring basket No - (L1 - £°)1) Example.....: Spring guide SSG 7005 - Type 18 A - Dy 154 - H 900 - No 3 Typ 18 A Typ 18 B For pipes Dy ≥ 375 For pipes Dy ≤ 196

Type 27 Type 27 A Spring guide for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. Type 27 B Spring guide for isolated pipes < 200° C. Designation: Spring guide SSG 7005 - Type - Dy - H - Spring basket No - (L1°)1) + Stop lug SSG 7100 - Type - Number - Material in guide 1) Example.....: Spring guide SSG 7005 - Type 27 A - Dy 203 - H 900 - No 3 + Stop lug SSG 7100 - Type B - 2 pieces - SS Steel 23 33 For pipes Dy > 43



45°

£° Guide SSG 7005 Typ 13 A Guide

SSG 7005 Typ 13 B

Variant A Variant B

Pipe support SSG 7005 –Typ 5

Dy

L1

H

Dy

H

Typ 27 A Guide SSG 7005 - Typ 13 A

Typ 27 B Guide SSG 7005 - Typ 13 B

SSG 7100

Pipe support SSG 7005 -Typ 9 B

L1


3.9.1.12


Type 28 Type 28 AA and AC Spring guide for non-insulated, protective insulated and insulated piping with max 80 mm thick insulation. Type 28 BA and BC Spring guide for insulated pipes < 200° C. Designation: Spring guide SSG 7005 - Type and variant - Dy - H - Spring basket No - (L1 - £°)1) + Stop lug SSG 7100 - Type - Number - Material in guide2) Example....: Spring guide SSG 7005 - Type 28 AA - Dy 203 - H 900 - No 3 + Stop lug SSG 7100 - Type B - 2 pieces - SS Steel 23 33 For pipes Dy > 43

1) Is only indicated by Type 28 B and deviaton from standard 2) Is only indicated for Type 28 A

Type 29 Type 29 A Spring guide for non-insulated, protective insulated and insulated piping with 80 mm thick insulation. Type 29 B Spring guide for insulated pipes < 200° C. Designation: Spring guide SSG 7005 - Type - Dy - H - Spring basket No - (L1 - £°)1) + Stop lug 7100 - Type - Number - Material in guide2) Example....: Spring guide SSG 7005 - Type 29 A - Dy 203 - H 900 - No 3 + Stop lug SSG 7100 - Type B - 2 pieces - SS Steel 23 33 For pipes Dy > 43

Typ 28 BA och BC guide SSG 7005

Typ 13 B Typ 28 AA och AC guide SSG 7005

Typ 13 A Variant A Variant C

Pipe support SSG 7005 - Typ 10 BC Pipe support

SSG 7005 - Typ 10 BA

Dy

L1

SSG 7100

H

Pipe support SSG 7005 - Typ 9 B

1) Is only indicated by Type 28 B and deviaton from standard 2) Is only indicated for Type 28 A

Typ 29 B guide SSG 7005

Typ 15 B Typ 29 A

guide SSG 7005 Typ 15 A

Dy

H

L1

SSG 7100


3.9.1.13


Type 30 Type 30 AA and AC Spring guide for non-insulated, protective insulated and insulated pipes with max 80 mm thick insulation. Type 30 BA and BC Spring guide for insulated pipes < 200° C. Designation: Spring guide SSG 7005 - Type - Dy - H - Spring basket No - (L1) + Stop lug SSG 7100 - Type - Number - Material in guide1) Example....: Spring guide SSG 7005 - Type 30 BC - Dy 203 - H 900 - No 3 + Stop lug SSG 7100 - Type B - 2 pieces - SS Steel 23 33 For pipes Dy > 43

Pipe support SSG 7005 Typ 10 BA Pipe support SSG 7005 Typ 10 BC

Typ 30 AA och AC guide SSG 7005

Typ 15 A Typ 30 BA och BC guide SSG 7005

Typ 15 B

L1

Dy

Dy

Dy

H

H

H Variant A with base plate

The support is shown in detail SSG 7178

Type 31 Designation: Support SSG 7005 - Type and variant - Dy - H Example.....: Support SSG 7005 - Type 31 A - Dy 153 - H 400 Dim. range 10 - 600

Type 32 Designation: Support SSG 7005 - Type and variant - Dy - H Example.....: Support SSG 7005 - Type 32 A - Dy 154 - H 500 Variant A Support for stainless steel pipe elbow SSG 1362 Variant B Support for steel pipe elbow SMS 2063 Variant C Support for steel pipe elbow SMS 2064 For pipes Dy < 60,3

1) Is only indicated for Typ 30 BA

SSG 7100

SSG 7177

SSG 7076


3.9.1.14


Typ 33 Designation: Flexible support SSG 7005 - Type and variant - Dy - H - T Example.....: Flexible support SSG 7005 - Type 33 B - Dy 154 - H 600 - T5 Variant A is bolted to the foundation. Variant B is welded to the foundation after that the necessary part of any zinc coating has been ground off. Normally the support is delivered uncoated at the zone intended for erection welding. Variant A with base plate. For pipes Dy > 43

Type 36 Type 36 A Fix supports for non-insulated or protective pipes. Type 36 B Fix support for insulated pipes. Designation: Fix SSG 7005 - Type - Dy Example.....: Fix SSG 7005 - Type 36 A - Dy 154 The drawing is not standard. For pipes Dy < 610 Information on material and surface treatment plus required height, length and permitted load is provided in SSG 7149. Type 38 Designation: Fix SSG 7005 - Type - Dk + Stop lug SSG 7100 - Type - Number Example.....: Fix SSG 7005 - Type 38 - Dk 170 + Stop lug SSG 7100 - Type A - 4 pieces Dim. range 10 - 600

Dy

Dy

SSG 7175 T H

SSG 7076

a 0,7 x T

45°

£°

SSG 7151 Type NK

SSG 7151 Type NL

Variant L SSG 7076

L1

SSG 7080

SSG 7100

Dk 43-90 Dk 104-196 Dk 207-461 Dk 513-610


3.9.1.15

Technical modifications reserved

01-0

0-24

2


Non-insulated SSG 7149 Dk H B h C HB h C 14 70 60 63 70 18 72 60 63 72 22 74 60 63 74 31 77 60 63 77 33 100 80 84 100 35 101 80 84 101 39 103 80 84 103 43 105 80 84 105 45 106 80 84 106 49 108 80 84 108 52 110 80 85 110 130 100 104 130 56 112 80 85 112 132 100 104 132 61 114 80 85 114 134 100 104 134 64 116 80 85 116 136 100 104 136 71 119 80 85 119 139 100 104 139 77 122 80 85 122 142 100 104 142 84 126 80 85 126 146 100 104 146 90 129 80 85 129 149 100 104 149 104 137 120 85 137 178 120 126 178 110 140 120 85 140 181 120 126 181 115 143 120 85 143 183 120 126 183 120 145 120 85 145 186 120 126 186 133 151 120 85 151 192 120 126 192 141 155 120 85 155 197 120 126 197 157 163 120 85 163 224 140 146 224 162 166 120 85 166 227 140 146 227 170 170 120 85 170 231 140 146 231 196 183 120 85 183 244 140 146 244 207 190 220 85 190 261 210 158 261 222 196 220 85 196 266 210 155 266 247 209 220 85 209 279 220 156 279 257 213 220 85 213 283 230 155 283 276 223 220 85 223 290 230 152 290 308 239 220 85 239 304 250 150 304 327 248 220 85 248 314 250 164 314 359 265 220 85 265 354 310 180 354 378 275 220 85 275 364 310 175 364 410 290 260 85 290 384 310 179 384 419 295 260 85 295 388 310 179 388 431 301 260 85 301 394 310 179 394 461 315 260 85 314 410 310 180 410 513 342 260 85 342 427 380 171 427 562 366 280 85 366 455 380 174 455 610 380 280 85 380 474 420 169 474 715 443 400 85 443 526 420 169 526 810 492 400 85 492 574 420 169 574

Insulated SSG 7151

Dk

C

D

H

h

E

B

£45°

Pipe Support Cobalch

Documents

Transcript of Pipe Support Cobalch