Pipe and Tube – Pocket Book - Yellow Pages€¦ · Pipe and Tube – Pocket Book ... In addition...
Transcript of Pipe and Tube – Pocket Book - Yellow Pages€¦ · Pipe and Tube – Pocket Book ... In addition...
Pipe and Tube – Pocket BookAS/NZS 1163LO Compliant
www.steelforce.com.au
© Steelforce Australia Ltd i
About Steelforce Australia Ltd
Steelforce is a wholly owned Australian company with its headquarters in Brisbane. The company commenced operations in 2000, and has grown to be a national force in steel products manufacture, trading and distribution.
Steelforce is one of the leading distributors of steel products offering a large range of steel sections from many convenient locations around Australia. Our distribution business prides itself on our people, stock holding, and commitment to service.
In addition to being a steel distributor Steelforce also own and operate two pipe and tube mills in Dalian China which are ISO 9001 quality accredited and manufacture to Australian standards in painted and GalForceTM finishes.
Our facility in China also includes a fabricated products capability if you require cutting, bending or welding of our manufactured pipe and tube. This is an important point of difference with respect to alternative suppliers in the market.
The trading division ensures that Steelforce can source steel from a number of overseas mills to ensure continuity of supply from quality manufacturers.
For more detailed information visit the Steelforce website: www.steelforce.com.au
© Steelforce Australia Ltd 1
Contents
Important Note 2
Square Hollow Sections (SHS) 3
SHS – GalForceTM & Painted 4-6
Rectangular Hollow Section (RHS) 7
RHS – GalForceTM & Painted 8-10
Circular Hollow Sections (CHS) 11
PIPE – GalForceTM & Painted 12-13PIPE – Structural CHS 14PIPE – Hot-Dip Galvanized 15-16PIPE – FireForceTM 17PIPE – ERW Gal Fence Pipe 18
Other Sections 19
Rail – Oval Rail 20
Other Information 21
Manufacturing Standards/Grades/Tolerances 22-23Length Capabilities 23Special Lengths 24Mill Processing 24Finishes 24Product Availability 24Colour Code Chart Inside back cover
Contact Details Outside back cover
© Steelforce Australia Ltd 2
Where this guide refers to AS/NZS 1163LO. The above standard is due to replace AS 1163 in December 2010. To comply with this standard each length will be individually marked.
Logo Name Mill # Year Day NoHeat
Number24 Hr
Time Clock
SF Steelforce 2 10 127 102798 22:15
Product is not compliant with the new standard if this information is not marked on each individual length.
This code will vary between manufacturers.
The information in this booklet has been taken from sources believed to be correct. Steelforce makes no warranty as to the correctness or the sufficiency of the information supplied; furthermore no warranty is given or implied that under certain conditions additional protective measures may be required.
Important Note
Square Hollow Sections (SHS)
3
© Steelforce Australia Ltd 4E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Section Finish StdLength
tonnesper pack
lengths per packd b t GalForceTM Painted
mm kg/m m20 x 20 x 1.6 0.873 0.873 6.5 0.278 49 2.0 1.05 1.05 6.5 0.334 49
25 x 25 x 1.6 1.12 1.12 6.5 0.357 49 2.0 1.36 1.36 6.5 0.433 49 2.5 1.64 1.64 6.5 0.522 49 3.0 1.89 1.89 6.5 0.602 49
30 x 30 x 1.6 1.38 1.38 8.0 0.541 49 2.0 1.68 1.68 8.0 0.659 49 2.5 2.03 2.03 8.0 0.796 49 3.0 2.36 2.36 8.0 0.680 36
35 x 35 x 1.6 1.63 1.63 8.0 0.639 49 2.0 1.99 1.99 8.0 0.780 49 2.5 2.42 2.42 8.0 0.581 30 3.0 2.83 2.83 8.0 0.679 30
40 x 40 x 1.6 1.88 1.88 8.0 0.541 36 2.0 2.31 2.31 8.0 0.665 36 2.5 2.82 2.82 8.0 0.677 30 3.0 3.30 3.30 8.0 0.792 30 4.0 4.09 4.09 8.0 0.818 25
50 x 50 x 1.6 2.38 2.38 8.0 0.571 30 2.0 2.93 2.93 8.0 0.703 30 2.5 3.60 3.60 8.0 0.720 25 3.0 4.25 4.25 8.0 0.850 25 4.0 5.35 5.35 8.0 0.856 20 5.0 6.56 6.56 8.0 0.840 16
6.0 ~ 7.32 8.0 0.937 16*
SHS – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
E. & O. E.
© Steelforce Australia Ltd 5E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Section FinishStd
Lengthtonnes
per packlengths
per packd b t GalForceTM Painted
mm kg/m m 8.0m 12.0m
65 x 65 x 1.6 3.13 3.13 8.0 0.501 ` 20
2.0 3.88 3.88 8.0 0.621 ` 20
2.5 4.78 4.78 8.0 0.765 ` 20
3.0 5.66 5.66 8.0 0.906 ` 20
4.0 7.23 7.23 8.0/12.0 0.925 1.39 16/16
5.0 8.75 8.75 8.0/12.0 0.840 1.26 12/12
6.0 ~ 10.1 8.0/12.0 0.970 1.45 12/12
75 x 75 x 2.0 4.50 4.50 8.0 0.576 ` 16
2.5 5.56 5.56 8.0 0.712 ` 16
3.0 6.60 6.60 8.0/12.0 0.845 0.950 16/12
3.5 7.53 7.53 8.0/12.0 0.723 0.813 12/9
4.0 8.49 8.49 8.0/12.0 0.815 0.917 12/9
5.0 10.3 10.3 8.0/12.0 0.742 0.742 9/6
6.0 ~ 12.0 8.0/12.0 0.864 0.864 9/6
89 x 89 x 2.2 5.92 ` 8.0 0.426 ` 9
3.5 9.07 9.07 8.0/12.0 0.653 0.980 9/9
5.0 12.5 12.5 8.0/12.0 0.900 0.900 9/6
6.0 ~ 14.7 8.0/12.0 0.706 0.706 6/4
SHS – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
E. & O. E.
© Steelforce Australia Ltd 6E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Section FinishStd
Lengthtonnes
per packlengths
per packd b t GalForceTM Painted
mm kg/m m 8.0m 12.0m
100 x 100 x 2.2 6.66 6.66 8.0 0.639 - 12
2.5 7.49 7.49 8.0 0.539 - 9
3.0 8.96 8.96 8.0/12.0 0.645 0.978 9/9
4.0 11.6 11.6 8.0/12.0 0.835 0.835 9/6
5.0 14.2 14.2 8.0/12.0 0.862 0.682 6/4
6.0 ~ 16.7 8.0/12.0 0.802 0.802 6/4
9.0 ~ 23.5 8.0/12.0 1.69 1.69 9/6*
125 x 125 x 4.0 14.8 14.8 8.0/12.0 0.710 0.710 6/4
5.0 18.2 18.2 8.0/12.0 0.874 0.874 6/4
6.0 ~ 21.4 8.0/12.0 0.685 1.03 4/4
9.0 ~ 30.6 8.0/12.0 1.96 1.47 8/4*
150 x 150 x 4.0 17.9 17.9 8.0/12.0 0.573 0.859 4/4
5.0 22.1 22.1 8.0/12.0 0.707 1.06 4/4
6.0 ~ 26.2 8.0/12.0 0.838 1.26 4/4
9.0 ~ 37.7 8.0/12.0 1.81 1.81 6/4*
178 x 178 x 6.3 ~ 33.1 12.0 - 1.59 4*
9.5 ~ 47.9 8.8/12.2 1.69 2.33 4/4*
200 x 200 x 5.0 ~ 29.9 8.0/12.0 1.44 1.44 6/4*
6.0 ~ 35.6 8.0/12.0 1.14 1.71 4/4*
9.0 ~ 51.8 8.0/12.0 1.66 1.24 4/2*
250 x 250 x 6.0 ~ 45.0 8.0/12.0 1.44 1.08 4/2*
9.0 ~ 65.9 8.0/12.0 1.05 1.58 2/2*
300 x 300 x 6.0 ~ 54.7 8.0/12.0 0.875 1.31 2/2*
9.0 ~ 80.6 8.0/12.0 1.29 1.93 2/2*
SHS – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
E. & O. E.
7
Rectangular Hollow Section (RHS)
© Steelforce Australia Ltd 8E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Section FinishStd
Lengthtonnes
per packlengths
per packd b t GalForceTM Painted
mm kg/m m
50 x 25 x 1.6 1.75 1.75 8.0 0.672 48
2.0 2.15 2.15 8.0 0.826 48
2.5 2.62 2.62 8.0 0.755 36
3.0 3.07 3.07 8.0 0.737 30
65 x 35 x 1.6 2.38 2.38 8.0 0.457 24
2.0 2.93 2.93 8.0 0.563 24
2.5 3.60 3.60 8.0 0.691 24
3.0 4.25 4.25 8.0 0.714 21
4.0 5.35 5.35 8.0 0.899 21
75 x 25 x 1.6 2.38 2.38 8.0 0.609 32
2.0 2.93 2.93 8.0 0.750 32
2.5 3.60 3.60 8.0 0.691 24
RHS – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 9E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Section FinishStd
Lengthtonnes
per packlengths
per packd b t GalForceTM Painted
mm kg/m m 8.0m 12.0m
75 x 50 x 1.6 3.01 3.01 8.0 0.482 ` 20
2.0 3.72 3.72 8.0 0.595 ` 20
2.5 4.58 4.58 8.0 0.733 ` 20
3.0 5.42 5.42 8.0 0.780 ` 18
4.0 6.92 6.92 8.0/12.0 0.664 0.996 12/12
5.0 8.35 8.35 8.0/12.0 0.802 1.20 12/12
6.0 ~ 9.67 8.0/12.0 0.928 1.39 12/12
76 x 38 x 1.6 2.71 2.71 8.0 0.694 ` 32
2.0 ~ 3.35 8.0 0.536 ` 20
2.5 ~ 4.15 8.0 0.664 ` 20
3.0 ~ 4.84 8.0 0.774 ` 20
100 x 50 x 1.6 3.64 3.64 8.0 0.437 ` 15
2.0 4.50 4.50 8.0 0.540 ` 15
2.5 5.56 5.56 8.0 0.667 ` 15
3.0 6.60 6.60 8.0/12.0 0.792 0.950 15/12
3.5 7.53 7.53 8.0/12.0 0.723 0.723 12/8
4.0 8.49 8.49 8.0/12.0 0.815 0.815 12/8
5.0 10.3 10.3 8.0/12.0 0.742 0.742 9/6
6.0 ~ 12.0 8.0/12.0 0.864 0.864 9/6
102 x 76 x 3.5 ~ 9.15 8.0 0.659 ` 9
5.0 12.7 12.7 8.0 0.610 ` 6
6.0 ~ 14.6 8.0 0.701 ` 6
RHS – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 10E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Section FinishStd
Lengthtonnes
per packlengths
per packd b t GalForceTM Painted
mm kg/m m 8.0m 12.0m
125 x 75 x 2.5 7.49 7.49 8.0 0.719 ` *
3.0 8.96 8.96 8.0/12.0 0.860 0.968 12/9
4.0 11.6 11.6 8.0/12.0 0.742 0.835 8/6
5.0 14.2 14.2 8.0/12.0 0.909 0.682 8/4
6.0 ~ 16.7 8.0/12.0 0.802 0.802 6/4
150 x 50 x 2.2 6.66 6.66 8.0 0.639 ` 12
2.5 7.49 7.49 8.0 0.719 ` 12
3.0 8.96 8.96 8.0/12.0 0.860 0.860 12/8
4.0 11.6 11.6 8.0/12.0 0.742 0.835 8/6
5.0 14.2 14.2 8.0/12.0 0.909 0.682 8/4
6.0 ~ 16.7 8.0/12.0 1.07 0.802 8/4
150 x 100 x 4.0 14.8 14.8 8.0/12.0 0.710 0.710 6/4
5.0 18.2 18.2 8.0/12.0 0.874 0.874 6/4
6.0 ~ 21.4 8.0/12.0 0.685 1.03 4/4
152 x 76 x 5.0 ~ 16.4 8.0/12.0 0.787 0.787 6/4
6.0 ~ 19.4 8.0/12.0 0.621 0.931 4/4
9.0 ~ 28.7 8.0 2.07 ` 9*
200 x 100 x 4.0 17.9 17.9 8.0/12.0 0.573 0.859 4/4
5.0 22.1 22.1 8.0/12.0 0.707 0.530 4/2
6.0 ~ 26.2 8.0/12.0 0.838 0.629 4/2
9.0 ~ 37.7 8.0/12.0 1.81 1.81 6/4*
250 x 150 x 5.0 ~ 29.9 8.0/12.0 1.44 1.44 6/4*
6.0 ~ 35.6 8.0/12.0 1.14 1.71 4/4* 9.0 ~ 51.8 8.0/12.0 1.66 1.24 4/2*
RHS – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
11
Circular Hollow Sections (CHS)
© Steelforce Australia Ltd 12E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Nominal Pipe Size
Section FinishStd
Lengthtonnes
per packlengths
per packOD t GalForceTM Painted
mm kg/m m
25 XL 33.7 x 2.0 1.56 1.56 6.5 0.375 37
25 L 2.6 1.99 1.99 6.5 0.479 37
32 XL 42.4 x 2.0 1.99 1.99 6.5 0.479 37
32 L 2.6 2.55 2.55 6.5 0.613 37
40 XL 48.3 x 2.3 2.61 2.61 6.5 0.628 37
40 L 2.9 3.25 3.25 6.5 0.782 37
50 XL 60.3 x 2.3 3.29 3.29 6.5 0.406 19
50 L 2.9 4.11 4.11 6.5 0.508 19
65 XL 76.1 x 2.3 ` 4.19 6.5 0.517 19
65 L 3.2 5.75 5.75 6.5 0.710 19
80 XL 88.9 x 2.6 5.53 5.53 6.5 0.359 10
80 L 3.2 6.76 6.76 6.5 0.439 10
90 XL 101.6 x 2.6 ` 6.35 6.5 0.413 10
90 L 3.2 ` 7.77 6.5 0.505 10
100 XL 114.3 x 3.2 8.76 8.76 6.5 0.569 10
100 L 3.6 9.83 9.83 6.5 0.639 10
125 XL 139.7 x 3.0 10.1 10.1 6.5 0.460 7
125 L 3.5 11.8 11.8 6.5 0.537 7
150 XL 165.1 x 3.0 12.0 12.0 6.5 0.546 7
150 L 3.5 13.9 13.9 6.5 0.632 7
PIPE – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 13E. & O. E.
Compliant with AS/NZS 1163Grade: C250LO
Nominal Pipe Size
Section FinishStd
Lengthtonnes
per packlengths
per packOD t GalForceTM Painted
mm kg/m m
25 M 33.7 x 3.2 2.41 2.41 6.5 0.580 37
25 H 4.0 ` 2.94 6.5 0.707 37
32 M 42.4 x 3.2 3.09 3.09 6.5 0.743 37
32 H 4.0 ` 3.79 6.5 0.911 37
40 M 48.3 x 3.2 3.56 3.56 6.5 0.856 37
40 H 4.0 ` 4.37 6.5 1.05 37
50 M 60.3 x 3.6 5.03 5.03 6.5 0.621 19
50 H 4.5 ` 6.19 6.5 0.764 19
65 M 76.1 x 3.6 6.44 6.44 6.5 0.795 19
65 H 4.5 ` 7.95 6.5 0.982 19
80 M 88.9 x 4.0 8.38 8.38 6.5 0.545 10
80 H 5.0 ` 10.3 6.5 0.672 10
90 M 101.6 x 4.0 ` 9.63 6.5 0.626 10
90 H 5.0 ` 11.9 6.5 0.774 10
100 M 114.3 x 4.5 ` 12.2 6.5 0.793 10
100 H 5.4 ` 14.5 6.5 0.943 10
125 M 139.7 x 5.0 ` 16.6 6.5 0.755 7
125 H 5.4 ` 17.9 6.5 0.814 7
150 M 165.1 x 5.0 ` 19.7 6.5 0.896 7
150 H 5.4 ` 21.3 6.5 0.969 7
PIPE – GalForceTM & Painted
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 14E. & O. E.
Compliant with AS/NZS 1163Grade: C350L0
Section FinishStd
Lengthtonnes
per packlengths
per packOD t Painted
mm kg/m m 9.0m 12.0m
168.3 x 4.8 19.4 9.0/12.0 0.524 0.698 3/3
6.4 25.6 9.0/12.0 0.691 0.922 3/3
7.1 28.2 9.0/12.0 0.761 1.02 3/3*
219.1 x 4.0 ` 9.0/12.0 0.573 0.764 3/3*
4.8 25.4 9.0/12.0 0.686 0.914 3/3
6.4 33.6 9.0/12.0 0.605 0.806 2/2
8.2 42.6 9.0/12.0 0.767 1.02 2/2*
PIPE – Structural CHS
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 15E. & O. E.
Grade: C350
Nominal Pipe Size
SectionFinishHDG
StdLength
tonnesper pack
lengths per packOD t
mm kg/m m
15 L 21.3 x 2.0 1.00 6.5 1.41 217
20 XL 26.9 x 2.0 1.29 6.5 1.06 127
20 L 2.3 1.46 6.5 1.21 127
25 XL 33.7 x 2.0 1.64 6.5 0.970 91
25 L 2.6 2.07 6.5 1.22 91
32 XL 42.4 x 2.0 2.10 6.5 0.833 61
32 L 2.6 2.65 6.5 1.05 61
40 XL 48.3 x 2.3 2.73 6.5 1.08 61
40 L 2.9 3.36 6.5 1.33 61
50 XL 60.3 x 2.3 3.44 6.5 0.827 37
50 L 2.9 4.25 6.5 1.02 37
65 XL 76.1 x 2.3 4.37 6.5 1.05 37
65 L 3.2 5.94 6.5 1.43 37
80 XL 88.9 x 2.6 5.75 6.5 0.710 19
80 L 3.2 6.98 6.5 0.862 19
90 XL 101.6 x 2.6 6.60 6.5 0.815 19
90 L 3.2 8.02 6.5 0.990 19
100 XL 114.3 x 3.2 8.98 6.5 1.11 19
100 L 3.6 10.0 6.5 1.24 19
125 XL 139.7 x 3.0 10.4 6.5 0.876 13
125 L 3.5 12.0 6.5 1.01 13
150 XL 165.1 x 3.0 12.3 6.5 0.800 10
150 L 3.5 14.4 6.5 0.936 10
PIPE – Hot-Dip Galvanized
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 16E. & O. E.
Grade: C250
Nominal Pipe Size
SectionFinishHDG
StdLength
tonnesper pack
lengths per packOD t
mm kg/m m
15 M 2.6 1.25 6.5 1.76 217
15 H 3.2 1.48 6.5 2.09 217
20 M 2.6 1.62 6.5 1.34 127
20 H 3.2 1.93 6.5 1.59 127
25 M 3.2 2.49 6.5 1.14 91
25 H 4.0 3.02 6.5 1.79 91
32 M 3.2 3.22 6.5 1.28 61
32 H 4.0 3.90 6.5 1.55 61
40 M 3.2 3.68 6.5 1.46 61
40 H 4.0 4.49 6.5 1.78 61
50 M 3.6 5.18 6.5 1.25 37
50 H 4.5 6.33 6.5 1.52 37
65 M 3.6 6.61 6.5 1.59 37
65 H 4.5 8.12 6.5 1.95 37
80 M 4.0 8.58 6.5 1.06 19
80 H 5.0 10.5 6.5 1.30 19
90 M 4.0 9.88 6.5 1.22 19
90 H 5.0 12.2 6.5 1.51 19
100 M 4.5 12.4 6.5 1.53 19
100 H 5.4 14.7 6.5 1.82 19
125 M 5.0 16.9 6.5 1.43 13
125 H 5.4 18.1 6.5 1.53 13
150 M 5.0 20.0 6.5 1.30 10
150 H 5.4 21.6 6.5 1.40 10
PIPE – Hot-Dip Galvanized
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 17E. & O. E.
Compliant with AS 1074Grade: C250L0
Nominal Bore
Section FinishStd
Lengthtonnes
per pack
lengths per
packOD t Gal Painted
mm kg/m m
25 L 33.7 x 2.6 1.99 1.99 6.5 0.479 37
25 M 3.2 2.41 2.41 6.5 0.580 37
32 L 42.4 x 2.6 2.55 2.55 6.5 0.613 37
32 M 3.2 3.09 3.09 6.5 0.743 37
40 L 48.3 x 2.9 3.25 3.25 6.5 0.782 37
40 M 3.2 3.56 3.56 6.5 0.856 37
50 L 60.3 x 2.9 4.11 4.11 6.5 0.508 19
50 M 3.6 5.03 5.03 6.5 0.621 19
65 L 76.1 x 3.2 5.75 5.75 6.5 0.710 19
65 M 3.6 6.44 6.44 6.5 0.795 19
80 L 88.9 x 3.2 6.76 6.76 6.5 0.439 10
80 M 4.0 8.38 8.38 6.5 0.545 10
100 L 114.3 x 3.6 9.83 9.83 6.5 0.639 10
100 M 4.5 ` 12.2 6.5 0.793 10
125 L 139.7 x 3.5 11.8 11.8 6.5 0.537 7
125 M 5.0 ` 16.6 6.5 0.755 7
150 L 165.1 x 3.5 13.9 13.9 6.5 0.632 7
150 M 5.0 ` 19.7 6.5 0.896 7
PIPE – FireForceTM
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
© Steelforce Australia Ltd 18E. & O. E.
Grade: C250
SectionFinish
GalStd
Lengthtonnes
per packlengths
per packOD t
mm kg/m m
16.0 x 1.2 0.44 6.5 0.183 64
19.0 x 1.2 0.53 6.5 0.220 64
PIPE – ERW Gal Fence Pipe
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
Grade: C250
SectionFinish
GalStd
Lengthtonnes
per packlengths
per packd b t
mm kg/m m
38 x 25 x 1.2 1.14 6.5 0.267 36
1.6 1.51 6.5 0.353 36
Other Sections
19
© Steelforce Australia Ltd 20E. & O. E.
Compliant with AS/NZS 1163Grade: C350LO
Section FinishStd
Lengthtonnes
per packlengths
per packd b t GalForceTM Painted
mm kg/m m
53 x 35 x 1.6 1.73 1.73 6.1 0.475 45
59 x 30 x 1.6 1.84 1.84 6.1 0.505 45
62 x 50 x 2.0 2.88 2.88 6.1 0.439 25
75 x 40 x 1.6 2.77 2.77 6.1 0.541 32
97 x 40 x 1.6 2.94 2.94 6.1 0.323 18
2.0 3.66 3.66 6.1 0.402 18
115 x 42 x 2.0 4.29 4.29 6.1 0.393 15
2.5 5.30 5.30 6.1 0.485 15
Rail – Oval Rail
* These sizes are outside of Steelforce’s manufacturing capabilities.Please check with your local representative when ordering.
Other Information
21
© Steelforce Australia Ltd 22E. & O. E.
Manufacturing Standards
Standard Description
AS 1074 Steel tubes and tubulars for ordinary service
AS/NZS 1163* Cold-formed structural steel hollow sections
AS/NZS 4792 (Section2)
Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process
AS/NZS 4792 (Section 3)
Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process
AS/NZS 1594 Hot-rolled steel flat products
AS/NZS 3678 Structural steel – Hot rolled plates, floor plates and slabs
AS/NZS 3679.1 Structural steel – Hot rolled bars & sections
AS/NZS 3679.2 Structural Steel – Hot rolled welded I sections
* Where this booklet refers to AS/NZS 1163 see Important Note page 2.
GradesHollow Sections – Standard Grade include: C250, C250L0, C350
& C350L0.
– Dual Grade RHS & SHS is available on request. MOQ applies – refer to your local sales representative.
Tolerances
b
dt t
t
d d
b
© Steelforce Australia Ltd 23E. & O. E.
Tolerances continued
Characteristic Circular hollow sectionsSquare & rectangular hollow sections
External Dimensions(d, b, do)
Minimum of ±0.5mm Minimum of ±0.5mm
Thickness (t) ±10% ±10%
Corner Radius - min = 1.8 x t max = 3 x t
Twist - v ≤ 2mm + 0.5mm per meter length
Straightness a ≤ 0.2% of total length (in mm)
a ≤ 0.15% of total length (in mm)
Length -0mm +20mm -0mm +20mm
Mass no less than 0.96 x specified mass
no less than 0.96 x specified mass
V
Twist Straightness
Length CapabilitiesOverall manufactured length capabilities of Steelforce Dalian products are as follows. Not all products are able to be rolled to the minimum and maximum as listed below – refer to your Sales Representative for more information.
– Minimum Rolling Length 5.0m
– Maximum Rolling Length 12.0m
See Mill Processing below for lengths shorter than 5.0m.
© Steelforce Australia Ltd 24E. & O. E.
Special LengthsSteelforce Dalian can roll special length orders within its manufactured length capabilities. A minimum order quantity (MOQ) may apply. See Mill Processing below for lengths shorter than 5.0m.
Mill Processing– Steelforce offers a pack cutting service if you require lengths less than
the minimum manufactured length capability (5.0m). Please contact your local sales representative for pricing, terms and conditions.
Finishes– Painted – Blue, Black, Red & Clear – GalForce™
– NOPC (no oil, paint or coatings) – Hot Dip Galvanized
Product Availability– Dual Graded product is available ex-rolling only and minimum
order quantities apply. Contact you local sales representative for more information.
– All product manufactured by Steelforce Dalian Mill are supplied in mini packs.
LEGEND LEGEND
b Breadth MOQ Minimum Order Quantity
d Depth m Meters
Gal Galvanized mm Millimeters
H Heavy OD Outside Diameter
HDG Hot Dip Galvanized Std Standard
kg/m Kilograms t Thickness
L Light XH Extra Heavy
M Medium XL Extra Light
~ available - sizes available upon request
© Steelforce Australia Ltd 25
RHS & SHS
Thickness Colour
1.6mm Purple
2.0mm Yellow
2.5mm Pink
3.0mm Blue
3.5mm Grey
4.0mm Green
5.0mm Orange
6.0mm White
8.0mm Red
9.0mm Purple
12.0mm Pink
Colour Code Chart
Head Office
Queensland – Brisbane T: +61 1300 661 635 F: +61 1300 961 535
Contact Details
Sales Offices
Queensland – Brisbane T: +61 1300 661 700 F: +61 1300 661 800
New South Wales – Sydney T: +61 1300 883 701 F: +61 1300 883 751
Victoria – Melbourne T: +61 1300 807 152 F: +61 1300 807 153
Western Australia – PerthT: +61 1300 733 791 F: +61 1300 733 792