PIP PNSMV004 - Carbon Steel Globe Valve Descriptions

TECHNICAL REVISION November 2005

Process Industry Practices Piping

PIP PNSMV004 Carbon Steel

Globe Valve Descriptions

Copyright Process Industry Practices Provided by IHS under license with PIP Licensee=Technip La Defense/5931917103

Not for Resale, 06/08/2007 14:23:59 MDTNo reproduction or networking permitted without license from IHS

--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.

This Practice is subject to revision at any time by the responsible Function Team and will be reviewed every 5 years. This Practice will be revised, reaffirmed, or withdrawn. Information on whether this Practice has been revised may be found at www.pip.org.

© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP member companies and subscribers may copy this Practice for their internal use. Changes, overlays, addenda, or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP.

PIP will not consider requests for interpretations (inquiries) for this Practice.

PRINTING HISTORY October 1995 Issued February 1999 Complete Revision November 2003 Technical Revision February 1997 Revision May 2000 Revision November 2005 Technical Revision June 1998 Revision June 2001 Technical Correction

Not printed with State funds



--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---

TECHNICAL REVISION November 2005

Process Industry Practices Page 1 of 10

Process Industry Practices Piping

PIP PNSMV004 Carbon Steel

Globe Valve Descriptions

Table of Contents

1. Introduction..................................2 1.1 Purpose ............................................. 2 1.2 Scope................................................. 2

2. References....................................2 2.1 Process Industry Practices................ 2

3. Valve Designation System ..........2

4. Notes............................................. 2

5. Cross Reference .......................... 3

6. Valve Descriptions ...................... 4



--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---

PIP PNSMV004 TECHNICAL REVISION Carbon Steel Globe Valve Descriptions November 2005

Page 2 of 20 Process Industry Practices

1. Introduction

1.1 Purpose This Practice provides requirements for suppliers providing carbon steel globe valves included in PIP Piping Line Class Material Specifications.

1.2 Scope This Practice describes the requirements for carbon steel globe valves.

2. References

Applicable parts of the following Practice shall be considered an integral part of this Practice. The edition in effect on the date of contract award shall be used, except as otherwise noted. Short titles will be used herein where appropriate.

2.1 Process Industry Practices (PIP) – PIP PNSMV002 – Specifications for PIP Valve Commodity Codes

3. Valve Designation System

3.1 For a full explanation of the format used to structure the valve numbers listed within this Practice, refer to PIP PNSMV002.

3.2 This Practice provides descriptions for gate valves. Therefore, the first two characters in the valve numbers are GL.

3.3 The valves listed in Section 5 and Section 6 of this Practice are sorted by the unique valve number designation in ascending alphanumeric sequence (e.g., GL01CA500, GL01CB500, GL01CB501, etc.).

4. Notes

4.1 Occasionally, valve size ranges listed in this Practice are broader than the size ranges shown for the same valves on a piping line class material specification. While the “most common practice” has been used to specify valve size ranges on line class specifications, a purchaser may need to utilize a valve in a size outside this “common practice” choice. Thus, for reference purposes, the full size range for which a given valve is typically manufactured is shown in this Practice.

4.2 Requirements for gear operators for globe valves are not specified in piping line specifications or valve specifications. Purchasers shall define the requirements for gear operators in their specifications.



--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---

TECHNICAL REVISION PIP PNSMV004 November 2005 Carbon Steel Globe Valve Descriptions


5. Cross Reference

Valve Number Applicable Line Classes

GL01CA500 1CA1S01

GL01CB500 1CB1B01, 1CB1S01, 1CB2S01, 1CS1B02, 1CS1S01, 1CS1S02, 1CS2S01, 1SA0B01

GL01CB501 1CB1B01, 1CS1B02, 1SA0B01

GL03CA500 3CA1S01

GL03CB500 3CS1B01, 3CS2B01, 3SA0B01 GL03CB501 3CS1B01, 3CS2B01, 3CB1S01, 3CB2S01, 3CS1S01,

3CS1S02, 3CS2S01, 3SA0B01

GL06CA500 6CA1S01P

GL06CB500 6CB1S01, 6CB2S01, 6SA0B01 GL06CB501 6SA0B01 GL06CB800 6CS1S01

GL08CA300 1CA1S01, 3CA1S01, 6CA1S01

GL08CB300 1CB1S01, 1CB2S01, 1CS1S01, 1CS2S01, 3CB1S01, 3CB2S01, 3CS1S01, 3CS2S01, 6CB1S01, 6CB2S01

GL08CB301 6CS1S01 GL08CB302 1CS1S02, 3CS1S02

GL09CB500 9CB1S01, 9CB2S01 GL09CB800 9CS1S01

GL15CB300 9CB1S01, 15CB1S01, 9CB2S01, 15CB2S01 GL15CB301 9CS1S01, 15CS1S01 GL15CB500 15CB1S01, 15CB2S01 GL15CB800 15CS1S01



--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---



6. Valve Descriptions

Description of GLOBE Valve (GL01CA500): (2 -to- 16) Type: .......................... GLOBE Class: ......................... 150 Ends: .......................... RF FLG Body/Bonnet:.............. ITCS (ASTM A350-LCB or LCC) Trim: ........................... 316 SS DISC, HARDFACE SEAT, API 600 TRIM #12 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 600 Bolts/Nuts: .................. BOLTS: ASTM A320 GR L7

NUTS: ASTM A194 GR 4 The standards are:

DESIGN - API 600, as applicable ENDS - ASME B16.5 RATING - ASME B16.34 TESTING - API 598 DIMENSIONAL - ASME B16.10

Description of GLOBE Valve (GL01CB500): (2 -to- 16) Type: .......................... GLOBE Class: ......................... 150 Ends: .......................... RF FLG Body/Bonnet:.............. CS (ASTM A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 600 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 600 Bolts/Nuts: .................. BOLTS: ASTM A193 GR B7

NUTS: ASTM A194 GR 2H The standards are:


Description of GLOBE Valve (GL01CB501): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 150 Ends: .......................... RF FLG Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 602 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts: .................. BOLTS: ASTM A193 GR B7


DESIGN - API 602, as applicable ENDS - ASME B16.11 RATING - API 602 DIMENSIONAL - ASME B16.10



--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---



Description of GLOBE Valve (GL03CA500): (2 -to- 12) Type: .......................... GLOBE Class: ......................... 300 Ends: .......................... RF FLG Body/Bonnet:.............. ITCS (ASTM A350-LCB or LCC) Trim: ........................... 316 SS DISC, HARDFACE SEAT, API 600 TRIM #12 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 600 Bolts/Nuts:.................. BOLTS: ASTM A320 GR L7



Description of GLOBE Valve (GL03CB500): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 300 Ends: .......................... RF FLG Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 602 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts:.................. BOLTS: ASTM A193 GR B7



Description of GLOBE Valve (GL03CB501): (2 -to- 12) Type: .......................... GLOBE Class: ......................... 300 Ends: .......................... RF FLG Body/Bonnet:.............. CS (ASTM A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 600 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 600 Bolts/Nuts:.................. BOLTS: ASTM A193 GR B7





--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---



Description of GLOBE Valve (GL06CA500): (2 -to- 12) Type: .......................... GLOBE Class: ......................... 600 Ends: .......................... RF FLG Body/Bonnet:.............. ITCS (ASTM A350-LCB or LCC) Trim: ........................... 316 SS DISC, HARDFACE SEAT, API 600 TRIM #12 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 600 Bolts/Nuts: .................. BOLTS: ASTM A320 GR L7






Description of GLOBE Valve (GL06CB501): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 600 Ends: .......................... RF FLG Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 602 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts: .................. BOLTS: ASTM A193 GR B7





--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---



Description of GLOBE Valve (GL06CB800): (2 -to- 12) Type: .......................... GLOBE Class: ......................... 600 Ends: .......................... BW Body/Bonnet:.............. CS (ASTM A216 WCB) Trim: ........................... FULL STELLITE, API 600 TRIM #5 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 600 Bolts/Nuts:.................. BOLTS: ASTM A193 GR B7



Description of GLOBE Valve (GL08CA300): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 800 Ends: .......................... SW Body/Bonnet:.............. ITCS (ASTM A350-LF2/A352-LCB or LCC) Trim: ........................... 316 SS DISC, HARDFACE SEAT, API 602 TRIM #12 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts:.................. BOLTS: ASTM A320 GR L7


DESIGN - API 602, as applicable ENDS - ASME B16.11 RATING - API 602 DIMENSIONAL - MFG STD

Description of GLOBE Valve (GL08CB300): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 800 Ends: .......................... SW Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 602 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts:.................. BOLTS: ASTM A193 GR B7





--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---



Description of GLOBE Valve (GL08CB301): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 800 Ends: .......................... SW Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... FULL STELLITE, API 602 TRIM #5 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. WELDED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts: .................. BOLTS: ASTM A193 GR B7



Description of GLOBE Valve (GL08CB302): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 800 Ends: .......................... SW Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 602 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. WELDED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts: .................. BOLTS: ASTM A193 GR B7








--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---



Description of GLOBE Valve (GL09CB800): (3 -to- 16) Type: .......................... GLOBE Class: ......................... 900 Ends: .......................... BW Body/Bonnet:.............. CS (ASTM A216 WCB) Trim: ........................... FULL STELLITE, API 600 TRIM #5 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. PRESSURE SEAL Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... MFG STD Bolts/Nuts:.................. BOLTS: ASTM A193 GR B7


DESIGN - ASME B16.34 ENDS - ASME B16.25 RATING - ASME B16.34 TESTING - API 598 DIMENSIONAL - ASME B16.10 or MFG STD

Description of GLOBE Valve (GL15CB300): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 1500 Ends: .......................... SW Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... 13 CR DISC, HARDFACE SEAT, API 602 TRIM #8 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. BOLTED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... API 602 Bolts/Nuts:.................. BOLTS: ASTM A193 GR B7


DESIGN - API 602, as applicable ENDS - ASME B16.11 RATING - ASME B16.34 TESTING - API 598 DIMENSIONAL - MFG STD

Description of GLOBE Valve (GL15CB301): (1/2 -to- 2) Type: .......................... GLOBE Class: ......................... 1500 Ends: .......................... SW Body/Bonnet:.............. CS (ASTM A105/A216 WCB) Trim: ........................... FULL STELLITE, API 602 TRIM #5 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. WELDED Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC The standards are:

DESIGN - API 602, as applicable ENDS - ASME B16.11 RATING - ASME B16.34 TESTING - API 598 DIMENSIONAL - MFG STD



--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---






Description of GLOBE Valve (GL15CB800): (3 -to- 16) Type: .......................... GLOBE Class: ......................... 1500 Ends: .......................... BW Body/Bonnet:.............. CS (ASTM A216 WCB) Trim: ........................... FULL STELLITE, API 600 TRIM #5 Body Type: ................. T-BODY Design: ....................... OS&Y Operation: .................. HANDWHEEL Bonnet Type: .............. PRESSURE SEAL Stem-Packing: ............ CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS Closer Type: ............... DISC Gaskets: ..................... MFG STD Bolts/Nuts: .................. BOLTS: ASTM A193 GR B7


DESIGN - ASME B16.34 ENDS - ASME B16.25 RATING - ASME B16.34 TESTING - API 598 DIMENSIONAL - ASME B16.10 or MFG STD



--`,````,```,,,```,,,`,``,````,-`-`,,`,,`,`,,`---

PIP PNSMV004 - Carbon Steel Globe Valve Descriptions

Documents

Transcript of PIP PNSMV004 - Carbon Steel Globe Valve Descriptions