Physical Science-1st Quarter - · PDF fileacceleration! Physical! Science ......
Transcript of Physical Science-1st Quarter - · PDF fileacceleration! Physical! Science ......
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
Physical Science – Early 1st Quarter Strand: Physical Science
Topic Content Statement Days Clear Learning Target Vocabulary Core
Resources Additional Resources Assessment
Scientific Inquiry and Application
(ongoing
throughout the year)
Design and conduct scientific investigations (ODE)
3 days
I can … Understand and agree to follow a Lab Safety Contract. Understand the meaning of Lab Safety Symbols. Identify and correct unsafe laboratory practices and techniques. Control a fire by the components of a fire triangle, how to use a fire extinguisher, the different types of smoke detectors and how they work, and how to understand and use a material safety data sheet (MSDS), and the function and purpose of OSHA (Occupational Safety and Health Act of 1970
Fire triangle class A, B, C, D fires photoelectric and radioactive smoke detectors mercury material safety data sheets (MSDS)
Glencoe Physical Science
w/Earth Science.
Conceptual Physical Science.
Handouts: Safety Symbols.
Laboratory and Safety
Guidelines.
Fire Safety Notes. EPA.ohio.gov Material Safety Data Sheets www.osha.gov
Safety and Measurement
Test
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
Scientific Inquiry and Application
(ongoing throughout the
year)
Design and conduct scientific investigations (ODE) Communicate and support a scientific argument. (ODE)(HS-‐ETS1-‐1;1-‐2;1-‐3) Use technology and mathematics to improve investigations and communications (ODE) Identify questions and concepts that guide scientific investigations. (ODE)
3 days
I can … Understand that the scientific method is a model to use to design scientific investigations and can be revised. Understand that different units attached to a measurement define a number and be able to understand which units apply. (grams, g/liter, m/s, m/s2 etc.) Use lab equipment (ruler, balance, graduated cylinder, thermometer, etc.) to accurately measure/record various objects to the correct number of significant figures. Identify and accurately use different laboratory equipment to measure/record data to the correct number of significant figures.
hypothesis control variable theory data independent variable dependent variable controlled variable significant figures Bunsen burner test tube tongs, graduated cylinder meniscus Erlenmeyer flask Florence flask ring stand beaker test tube clamp thermometer purpose/objective hypothesis materials procedures data table graph conclusion.
Glencoe Physical Science w/Earth Science.
Conceptual Physical Science.
Glencoe Physical Science w/Earth Science.
Conceptual Physical Science.
Triple beam balances,
metric rulers, graduated cylinders,
thermometers
Designing an Experiment
Appendix I in Conceptual
Physical Science. Reference Table in Glencoe
Physical Science w/Earth Science.
Significant Figures
Summary notes. Precision,
accuracy and significant
figures handouts on measurement
Significant Figures
Measurement Lab
Obscertainer Lab or
Observation Class Activity.
Components of a
lab report handout.
Safety and Measurement
Test
Lab reports
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
Distinguish the difference between an observation and an inference. Write a lab report.
Topic Content Statement Days Clear Learning Target Vocabulary Core
Resources Additional Resources Assessment
Forces and Motion
This topic focuses on forces and motion within, on and around the Earth and within the universe.
Motion: Introduction to a one dimensional vector to show that forces have magnitude and direction. Displacement, velocity: constant, average, and instantaneous) and acceleration will be differentiated. Interpreting position vs. time and velocity vs. time graphs. (HS-‐PS2-‐2,ODE) Forces can be added. The net force on an object is the sum of all of the forces acting on the object. The net force acting on an object can change the object’s direction and/or speed. The motion of an object is always measured with respect to a reference point. When the net force is greater than zero, the object’s speed and/or direction will change.
9 days
I can… Use vectors to show direction and magnitude of forces such as weight, velocity, air and resistance. I can determine that forces moving in the same direction are additive, forces opposing one another are subtractive. Forces moving at an angle to one another are found using the parallelogram rule. Understand that motion of an object is always measured with respect to a reference point.
vector, velocity, unbalanced forces, speed, force, net force, friction, displacement, balanced forces, average speed, air resistance, acceleration Normal force, frictional force (static, sliding, rolling), gravity, tension force, air resistance, mechanical equilibrium, dynamic equilibrium, terminal velocity, acceleration, average vs. instantaneous speed.. c= √a2+b2
Physical Science w/Earth Science Chapter 3:Motion, Acceleration and Forces, Section 1, 2, 3. Conceptual Physical Science Chapter 1.
Chapter 3 exercises and problems in Chapter review pg. 92 Force and Acceleration Lab pg. 87 Stopping on a Dime Lab (meter stick, 2 stopwatches, tape measure) Terminal Velocity Lab (coffee filters)
Chapter 3 Test: Motion, Acceleration, and Forces Lab Reports
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
When the net force is zero, the object remains at rest or continues to move at a constant speed in a straight line.
Explain the difference between speed and velocity. Interpret position vs. time and velocity vs. time graphs. Identify how acceleration, time, and velocity are related. Describe how to calculate the average acceleration and average speed of an object.
where c is the resultant for vectors moving at an angle to one another.
Topic Content Statement Days Clear Learning Target Vocabulary Core
Resources Additional Resources Assessment
Forces and Motion
Forces Force diagrams, types of forces (gravity, friction, normal, tension). Field model for forces at a distance. Dynamics (how forces affect motion) Objects at rest Objects moving with constant velocity. Accelerating objects. (HSPS2-‐1, HSPS2-‐2, HSPS 2-‐3), ODE, NGSS
8 days
I can… Explain how positive and negative acceleration affect motion. Explain how forces and motion are related. Compare and contrast static friction and sliding friction. Describe the effects of air resistance on falling objects.
mass weight Newton’s Laws of Motion 1 (Law of Inertia) Law of Motion 2 (F= ma) Law of Motion 3 (action-‐reaction) centripetal acceleration
Physical Science w/Earth Science Chapter 4: The Laws of Motion, Sections 1,2,3. Conceptual Physical Science Chapter 2 Video: Understanding Car Crashes:
Chapter 4 exercises and problems in Chapter Review pgs. 122-‐123 spring scale, weights, Newton spring scale cars, magnets various balls, meterstick, stopwatch, masking tape, paper.
Chapter 4 Test: The Laws of Motion
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
Define Newton’s 1’st Law of Motion and explain how inertia and mass are related. Define Newton’s 2nd Law of Motion and apply it to calculate forces applied horizontally (ma) and forces applied vertically (mg). Describe what gravitational force is.
Distinguish between mass and weight (compare mass/weight on moon vs. earth).
Explain that force is a vector quantity and has both magnitude and direction and is calculated in units of kgm/s2 = Newton
Explain why objects that are thrown will follow a curved path.
Compare circular motion with motion in a straight line.
centripetal force gravity inertia law of conservation of momentum momentum Newton kilogram
It’s Basic Physics
Gravity and Air Resistance Lab page 112/or The Momentum of Colliding Objects pg 118-‐119.
Lab Report
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
State Newton’s 3rd Law of Motion and identify action-‐reaction forces in our world. Calculate momentum (mv) of moving objects and recognize when momentum is conserved.
Content Elaborations:
Science and Engineering Practices
Asking Questions and Defining Problems: Asking questions and defining problems in 9–12 builds on K–8 experiences and progresses to formulating, refining, and evaluating empirically testable questions and design problems using models and simulations.
• Analyze complex real-‐world problems by specifying criteria and constraints for successful solutions. (HS-‐ETS1-‐1) Using Mathematics and Computational Thinking: Mathematical and computational thinking in 9-‐12 builds on K-‐8 experiences and progresses to using algebraic thinking and analysis, a range of linear and nonlinear functions including trigonometric functions, exponentials and logarithms, and computational tools for statistical analysis to analyze, represent, and model data. Simple computational simulations are created and used based on mathematical models of basic assumptions.
• Use mathematical models and/or computer simulations to predict the effects of a design solution on systems and/or the interactions between systems. (HS-‐ETS1-‐4)
Constructing Explanations and Designing Solutions: Constructing explanations and designing solutions in 9–12 builds on K–8 experiences and progresses to explanations and designs that are supported by multiple and independent student-‐generated sources of evidence consistent with scientific ideas, principles and theories:
• Design a solution to a complex real-‐world problem, based on scientific knowledge, student-‐generated sources of evidence, prioritized criteria, and tradeoff considerations. (HS-‐ETS1-‐2).
• Evaluate a solution to a complex real-‐world problem, based on scientific knowledge, student-‐generated sources of evidence, prioritized criteria, and tradeoff considerations. (HS-‐ETS1-‐3)Asking Questions and Defining Problems
Forces and Motion Building upon content in elementary and middle school, major concepts of motion and forces are further developed. In middle school, speed has been dealt with conceptually, mathematically and graphically. The concept that forces have both magnitude and direction can be represented with a force
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
diagram, that forces can be added to find a net force and that forces may affect motion has been addressed in middle school. At the high school level, mathematics (including graphing) is used when describing these phenomena, moving from qualitative understanding to one that is more quantitative. For the physical science course, all motion is limited to objects moving in a straight line either horizontally, vertically, up an incline or down an incline, that can be characterized in a single step (e.g., at rest, constant velocity, constant acceleration). Motions of two objects may be compared or addressed simultaneously (e.g., when or where would they meet?) • Motion The motion of an object depends on the observer’s frame of reference and is described in terms of distance, position, displacement, speed, velocity, acceleration and time. Position, displacement, velocity and acceleration are all vector properties (magnitude and direction). All motion is relative to whatever frame of reference is chosen, for there is no motionless frame from which to judge all motion. The relative nature of motion will be addressed conceptually, not mathematically. Non-‐ inertial reference frames are excluded. Motion diagrams can be drawn and interpreted to represent the position and velocity of an object. Showing the acceleration on motion diagrams will be reserved for physics. The displacement or change in position of an object is a vector quantity that can be calculated by subtracting the initial position from the final position (Δx = xf – xi). Displacement can be positive or negative depending upon the direction of motion. Displacement is not always equal to the distance travelled. Examples should be given where the distance is not the same as the displacement. Velocity is a vector property that represents the rate at which position changes. Average velocity can be calculated by dividing displacement (change in position) by the elapsed time (vavg = (xf – xi)/(tf – ti)). Velocity may be positive or negative depending upon the direction of motion and is not always equal to the speed. Provide examples of when the average speed is not the same as the average velocity. Objects that move with constant velocity have the same displacement for each successive time interval. While speeding up or slowing down and/or changing direction, the velocity of an object changes continuously, from instant to instant. The speed of an object at any instant (clock reading) is called instantaneous speed. An object may not travel at this instantaneous speed for any period of time or cover any distance with that particular speed, especially if the speed is continually changing. Acceleration is a vector property that represents the rate at which velocity changes. Average acceleration can be calculated by dividing the change in velocity divided by elapsed time (aavg = (vf – vi)/(tf – ti)). At this grade level, it should be noted that acceleration can be positive or negative, but specifics about what kind of motions produce positive or negative accelerations will be addressed in the physics syllabus. The word “deceleration” should not be used because students tend to associate a negative sign of acceleration only with slowing down (it could also be the lurching forward of a person in a car when the breaks are applied). Objects that have no acceleration can either be standing still or be moving with constant velocity (speed and direction remain the same). Constant acceleration occurs when the change in an object’s instantaneous velocity is the same for equal successive time intervals. Motion can be represented by position vs. time and velocity vs. time graphs. Specifics about the speed, direction and change in motion can be determined by interpreting such graphs. For physical science, graphs will be limited to positive x-‐values and show only uniform motion involving constant velocity or constant acceleration. Motion must be investigated by collecting and analyzing data in the laboratory. Technology can enhance motion exploration and investigation through video analysis, the use of motion detectors and graphing data for analysis. Objects that move with constant velocity and have no acceleration form a straight line (not necessarily horizontal) on a position vs. time graph. Objects that are at rest will form a straight horizontal line on a position vs. time graph. Objects that are accelerating will show a curved line on a position vs. time graph. Velocity can be calculated by determining the slope of a position vs. time graph. Positive slopes on position vs. time graphs indicate motion in a positive direction. Negative slopes on position vs. time graphs indicate motion in a negative direction. While it is important that students can construct graphs by hand, computer graphing programs or graphing calculators also can be used so more time can be spent on graph interpretation and analysis. Constant acceleration is represented by a straight line (not necessarily horizontal) on a velocity vs. time graph. Objects that have no acceleration (at rest or moving at constant velocity) will have a straight horizontal line for a velocity vs. time graph. Average acceleration can be calculated by determining the slope of a velocity vs. time graph. The details about motion graphs should not be taught as rules to memorize, but rather as generalizations that can be
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
developed from interpreting the graphs. Forces Force is a vector quantity, having both magnitude and direction. The (SI) unit of force is a Newton (N). One Newton of net force will cause a 1 kg object to experience an acceleration of 1 m/s2. A Newton also can be represented as kg·m/s2. The opportunity to measure force in the lab must be provided (e.g., with a spring scale or a force probe). Normal forces and tension forces are introduced conceptually at this level. These forces and other forces are introduced in prior grades (friction, drag, contact, gravitational, electric and magnetic) and can be used as examples of forces that affect motion. Gravitational force, weight (mg), can be calculated from mass, but all other forces will only be quantified from force diagrams that were introduced in middle school. In physical science, only forces in one dimension (positive and negative) will be addressed. The net force can be determined by one-‐dimensional vector addition. More quantitative study of friction forces, universal gravitational forces, elastic forces and electrical forces will be addressed in the physics syllabus. Friction is a force that opposes sliding between two surfaces. For surfaces that are sliding relative to each other, the force on an object always points in a direction opposite to the relative motion of the object. In physical science, friction will only be calculated from force diagrams. Equations for static and kinetic friction are found in the physics syllabus. A normal force exists between two solid objects when their surfaces are pressed together due to other forces acting on one or both objects (e.g., a solid sitting on or sliding across a table, a magnet attached to a refrigerator). A normal force is always a push directed at right angles from the surfaces of the interacting objects. A tension force occurs when a non-‐slack rope, wire, cord or similar device pulls on another object. The tension force always points in the direction of the pull. In middle school, the concept of a field as a region of space that surrounds objects with the appropriate property (mass for gravitational fields, charge for electric fields, a magnetic object for magnetic fields) was introduced to explain gravitational, magnetic and electrical forces that occur over a distance. The field concept is further developed in physical science. The stronger the field, the greater the force exerted on objects placed in the field. The field of an object is always there, even if the object is not interacting with anything else. The gravitational force (weight) of an object is proportional to its mass. Weight, Fg, can be calculated from the equation Fg = mg, where g is the gravitational field strength of an object which is equal to 9.8 N (kgm/s2) on the surface of Earth. Dynamics An object does not accelerate (remains at rest or maintains a constant speed and direction of motion) unless an unbalanced net force acts on it. The rate at which an object changes its speed or direction (acceleration) is proportional to the vector sum of the applied forces (net force, Fnet) and inversely proportional to the mass (a = Fnet/m). When the vector sum of the forces (net force) acting on an object is zero, the object does not accelerate. For an object that is moving, this means the object will remain moving without changing its speed or direction. For an object that is not moving, the object will continue to remain stationary. These laws will be applied to systems consisting of a single object upon which multiple forces act. Vector addition will be limited to one dimension. While both horizontal and vertical forces can be acting on an object simultaneously, one of the dimensions must have a net force of zero. A force is an interaction between two objects. Both objects in the interaction experience an equal amount of force, but in opposite directions. Interacting force pairs are often confused with balanced forces. Interacting force pairs can never cancel each other out because they always act on different objects. Naming the force (e.g., gravity, friction) does not identify the two objects involved in the interacting force pair. Objects involved in an interacting force pair can be easily identified by using the format “A acts on B so B acts on A.” For example, the truck hits the sign therefore the sign hits the truck with an equal force in the opposite direction. Earth pulls the book down so the book pulls Earth up with an equal force. The focus of the content is to develop a conceptual understanding of the laws of motion to explain and predict changes in motion, not to name or recite a memorized definition. In the physics syllabus, all laws will be applied to systems of many objects.(ODE)
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
End Early 1st Quarter (4.5 Weeks) District
Short Cycle Assessment
Physical Science-‐ Late 1st Quarter
Topic Content Statement Days Clear Learning Target Vocabulary Core
Resource Additional Resources Assessment
Energy and Waves
Energy and Waves
Conservation of Energy Quantifying kinetic energy. Quantifying gravitational potential energy. Definitions of Energy: PS3.A: Energy is a quantitative property of a system that depends on the motion and interactions of matter and radiation within that system. That there is a single quantity called energy is due to the fact that a system’s total energy is conserved, even as, within the system, energy is continually transferred from one object to another and between its various possible forms. (HS-‐PS3-‐1),(HS-‐PS3-‐2) (NGSS),(ODE)
5 days 5
days
I can distinguish between kinetic and potential energy. I can calculate the change in kinetic energy in a system. I can describe different forms of potential energy. I can calculate gravitational potential energy. I can describe how energy can be transformed from one form to another. I can explain and calculate how the mechanical energy of a system is the sum of the kinetic and potential
impulse momentum relationship between FT=Δmv, conservation of momentum mv before =mv after elastic and inelastic collisions work potential (mgh)and kinetic energy (1/2 mv2) mechanical energy chemical and gravitational potential energy
Physical Science w/Earth Science Chapter 5: Energy,
Sections 1,2 Conceptual Physical Science Chapter 3
Chapter 5 exercises and problems in
Chapter 5 Review pages 148-‐149.
Pendulum, spring scale or bungee cord, various types of balls,
shoe box, balance, meterstick, masking tape.
(Assessment is limited to devices constructed with
materials provided to students.)
Chapter 5 Test: Energy
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
Energy and Waves
Energy is relative and can be transformed from one form to another. Transfer and transformation of energy (including work). Design, build, and refine a device that works within given constraints to convert one form of energy into another form of energy.* [Clarification Statement: Emphasis is on both qualitative and quantitative evaluations of devices. Examples of devices could include Rube Goldberg devices, wind turbines, solar cells, solar ovens, and generators. Examples of constraints could include use of renewable energy forms and efficiency. Assessment Boundary: Assessment for quantitative evaluations is limited to total output for a given input. HS-‐PS3-‐4, (NGSS), (ODE)
1 day 2
days 2
days
1 day
energy. I can discuss and apply the law of conservation of energy to various systems. I can identify the forms of energy observed in a bouncing ball and infer why the ball stops bouncing. I can explain the meaning of work and describe how work and energy are related. I can calculate work and power. I can explain how machines make doing work easier. I can calculate the mechanical advantage of a machine I can calculate the efficiency of a machine.
joule. work (Fd) work-‐energy theorem (work=ΔE) power law of conservation of energy input and output forces ideal machine mechanical advantage efficiency
Bouncing Balls Lab page 134
Physical Science w/Earth Science Chapter
6:Work and Machines (sections 1 and 2 only) Conceptual Physical Science Chapter 3
Lab Report
Chapter 6: Work and Machines
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
Content Elaborations: Energy and Waves Building upon knowledge gained in elementary and middle school, major concepts about energy and waves are further developed. Conceptual knowledge will move from qualitative understandings of energy and waves to ones that are more quantitative using mathematical formulas, manipulations and graphical representations. Conservation of Energy Energy content learned in middle school, specifically conservation of energy and the basic differences between kinetic and potential energy is elaborated on and quantified in this course. Energy has no direction and has units of Joules (J). Kinetic energy, Ek, can be mathematically represented by Ek = ½mv2. Gravitational potential energy, Eg , can be mathematically represented by Eg = mgh. The amount of energy of an object is measured relative to a reference that is considered to be at a point of zero energy. The reference may be changed to help understand different situations. Only the change in the amount of energy can be measured absolutely. The conservation of energy and equations for kinetic and gravitational potential energy can be used to calculate values associated with energy (i.e., height, mass, speed) for situations involving energy transfer and transformation. Opportunities to quantify energy from data collected in experimental situations (e.g., a swinging pendulum, a car travelling down an incline) must be provided. ODE. Conservation of energy means that the total change of energy in any system is always equal to the total energy transferred into or out of the system. (HS-‐PS3-‐1). Energy cannot be created or destroyed, but it can be transported from one place to another and transferred between systems. (HS-‐PS3-‐1),(HS-‐PS3-‐4). Mathematical expressions, which quantify how the stored energy in a system depends on its configuration (e.g. relative positions of charged particles, compression of a spring) and how kinetic energy depends on mass and speed, allow the concept of conservation of energy to be used to predict and describe system behavior. (HS-‐PS3-‐1). The availability of energy limits what can occur in any system. (HS-‐PS3-‐1). Definitions of Energy: Energy is a quantitative property of a system that depends on the motion and interactions of matter and radiation within that system. That there is a single quantity called energy is due to the fact that a system’s total energy is conserved, even as, within the system, energy is continually transferred from one object to another and between its various possible forms. (HS-‐PS3-‐1),(HS-‐PS3-‐2). At the macroscopic scale, energy manifests itself in multiple ways, such as in motion, sound, light, and thermal energy. (HS-‐PS3-‐2) (HS-‐PS3-‐3). These relationships are better understood at the microscopic scale, at which all of the different manifestations of energy can be modeled as a combination of energy associated with the motion of particles and energy associated with the configuration (relative position of the particles). In some cases the relative position energy can be thought of as stored in fields (which mediate interactions between particles). This last concept includes radiation, a phenomenon in which energy stored in fields moves across space. (HS-‐PS3-‐2). Transfer and Transformation of Energy In middle school, concepts of energy transfer and transformation were addressed, including conservation of energy, conduction, convection and radiation, the transformation of electrical energy, and the dissipation of energy into thermal energy. Work also was introduced as a method of energy transfer into or out of the system when an outside force moves an object over a distance. In this course, these concepts are further developed. As long as the force, F, and displacement, Δx, are in the same direction, work, W, can be calculated from the equation W = FΔx. Energy transformations for a phenomenon can be represented through a series of pie graphs or bar graphs. Equations for work, kinetic energy and potential energy can be combined with the law of conservation of energy to solve problems. When energy is transferred from one system to another, some of the energy is transformed to thermal energy. Since thermal energy involves the random movement of many trillions of subatomic particles, it is less able to be organized to bring about further change. Therefore, even though the total amount of energy remains constant, less energy is available for doing useful work.
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
Semester Project: Egg Drop
Topic Content Statement Days Clear Learning Target Vocabulary Core
Resource Additional Resources Assessment
Forces and Motion
Egg Approval Form: The egg may not be hardboiled. The vehicle carrying the egg cannot use Bubble wrap, liquids, Styrofoam, Memory foam or a parachute. The egg vehicle can be no larger than 1 cubic foot, (1728 cubic inches). The egg vehicle must hit a target to get maximum points. The egg/vehicle may be dropped up to 3 times as long as the egg is still intact after the first drop. (if the egg sub-‐ sequentially breaks points will be deducted.) All calculations must have appropriate units and accurate calculations.
2 The student will be able to design and construct an egg vehicle that can withstand a two-‐three story fall. The student will be able to calculate/measure the forces acting on the egg: velocity, momentum, potential and kinetic energy and weight. Height of drop, density of egg-‐vehicle and weight of egg-‐vehicle, as well as dimensions (volume) of the egg are measured and recorded.
Egg vehicle, target zone, apparatus, density, volume (l*w*h), velocity, momentum, force, impulse force, kinetic energy.
Handout and Rubric
Target drawn on a white sheet (2 square meters), timers(2), tape measure or laser measure, clipboard.
Vehicle construction, data and calculations sheet. Accuracy of drop on target.
Lorain City School District Scope, Sequence and Pacing Guides
Physical Science – Grade 9
Common Formative Assessments will be implemented daily.
End Late 1st Quarter (9 Weeks) District Short
Cycle Assessment
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
Physical Science – Early 2nd Quarter Strand: Physical Science
Topic Content Statement Days Clear Learning Target Vocabulary Core
Resource Additional Resources Assessment
Energy and Waves (ODE,
NGSS)
Thermal Energy: Create a computational model to calculate the change in the energy of one component in a system when the change in energy of the other component(s) and energy flows in and out of the system are known. Emphasis is on explaining the meaning of mathematical expressions used in the model. Assessment is limited to basic algebraic expressions or computations; to systems of two or three components; and to thermal energy, kinetic energy, and/or the energies in gravitational, magnetic, or electric fields. HS-‐PS3-‐1, ODE Develop and use models to illustrate that energy at the macroscopic scale can be accounted for as a combination of energy associated with the motions of particles (objects) and energy associated with the relative position of particles (objects). Examples of phenomena at the macroscopic scale could include the conversion of kinetic energy to
3 days 2
days
2
days
I can define temperature and explain how thermal energy and temperature are related. I can calculate the change in thermal energy of an object due to a temperature change Q= m (Tf-‐Ti)C I can describe the differences in the four states of matter. I can explain how motion of particles in a material changes at the materials melting and boiling point. I can explain why thermal expansion occurs. I can compare and contrast the transfer of thermal energy by conduction,
thermodynamics temperature absolute zero thermal energy heat calorie, Kelvin Celsius specific heat capacity kinetic theory evaporation sublimation, condensation boiling melting freezing heat of fusion states of matter (solid, liquid, gas, plasma) heat of vaporization, 1’st law of thermodynamics 2’nd law of thermodynamics entropy conduction
Physical Science w/Earth
Science Chap 9: Heat and States of Matter, Sections 1,2,3,4.
Conceptual Physical Science
Chapter 6,7
Education-‐portal.com
Chapter exercises and problems on Chapter 9 Review pgs. 282-‐283
Miracle Thaw, black plastic, ice demonstration of specific heat capacity,
Calorimeter, thermometers, 400 ml beakers, Styrofoam cups hot plate, thermal
mitts.
Infrared heat gun.
Demonstration of the heating of
plastic, metal and wood spoons in boiling water/or Comparing
Thermal Energy Mini Lab pg. 267
Chapter 9 Test: Heat and States of Matter
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
Energy and Waves
(ODE,NGSS)
thermal energy, the energy stored due to position of an object above the Earth, and the energy stored between two electrically-‐charged plates. Examples of models could include diagrams, drawings, descriptions, and computer simulations. HS-‐PS3-‐2, (NGSS,ODE) Plan and conduct an investigation to provide evidence that the transfer of thermal energy, when two components of different temperature are combined within a closed system, results in a more uniform energy distribution among the components in the system (Second Law of Thermodynamics). Emphasis is on analyzing data from student investigations and using mathematical thinking to describe the energy changes both quantitatively and conceptually. Examples of investigations could include mixing liquids at different initial temperatures or adding objects at different temperatures to water. HS-‐PS3-‐4,(NGSS)(ODE) 1’st Law of Thermodynamics: When heat flows to or from a system, the system gains or
3
days
1 day 4
days
convection, and radiation. I can describe the difference between a thermal conductor and a thermal insulator. I can explain how insulators are used to control the transfer of thermal energy. I can describe and apply the 1’st and 2nd laws of thermodynamics to real world examples. I can explain how a internal combustion engine change thermal energy to mechanical energy. I can explain how a refrigerator removes heat from the system. I can explain how the entropy of the universe changes when any event occurs.
convection radiation thermal insulator
Lab: Conduction in Gases pg. 278-‐
279
Lab Report
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
loses an amount of thermal energy equal to the amount of heat transferred. Heat added to a system equals increase in thermal energy of the system and the external work done by the system. 2nd Law of Thermodynamics: Heat never of itself flows from a cold object to a hot object without work being put into the system to do so.
Energy and Waves (ODE,
NGSS)
Electricity: Movement of electrons: Use mathematical representations of Newton’s Law of Gravitation and Coulomb’s Law to describe and predict the gravitational and electrostatic forces between objects. Emphasis is on both quantitative and conceptual descriptions of gravitational and electric fields.] HS-‐PS2-‐4 , (NGSS)(ODE) Communicate scientific and technical information about why the molecular-‐level structure is important in the functioning of designed materials. Emphasis is on the attractive and repulsive forces that determine the functioning of the material. Examples could
3 days
3
days
I can describe how electric charges exert forces on each other. I can compare the strengths of electric and gravitational forces. I can distinguish the difference between a conductor and insulator. I can explain how objects become electrically charged. I can demonstrate the difference between charging by conduction and charging by contact. I can describe how
static electricity law of conservation of charge conductor insulator charging by induction charging by contact ion Coulombs law (F= kq1q2/d2) voltage difference circuit Ohm’s law resistance electrically polarized electric field electric
Physical Science w/Earth Science Chapter
13:Electricity, Sections1,2,3 Conceptual Physical Science Chapter 8
Chapter exercises and problems on Chapter 13
Review pgs. 418-‐419
Light Bulb Lab Energy Company
Handouts Kill A Watt meters,
Batteries (D, 6V, AA), flashlight bulbs, insulated wire, electrical tape, battery holders, small lights with sockets,
aluminum foil paper clips.
Chapter 13 Test:
Electricity
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
include why electrically conductive materials are often made of metal, flexible but durable materials are made up of long chained molecules, and pharmaceuticals are designed to interact with specific receptors. HS-‐PS2-‐6 (NGSS) Electric current flows from a region of high electric potential to low electric potential. Electric potential: work is required to push a charged particle against an electric field. Resistors and transfer of energy: Ohms Ω where Current = V/R Forces at a distance are explained by fields (gravitational, electric, and magnetic) permeating space that can transfer energy through space. Magnets or electric currents cause magnetic fields; electric charges or changing magnetic fields cause electric fields. (HS-‐PS2-‐4),(HS-‐PS2-‐5)(NGSS)(ODE) Develop and use a model of two objects interacting through electric or magnetic fields to illustrate the forces between objects and the changes in energy of the objects due to the
1 day 1 day
voltage differences cause currents to flow. I can explain how batteries produce a voltage difference in a circuit. I can list the factors affecting an objects electrical resistance. I can define Ohms law and apply it to an electrical current. I can describe the difference between a series and parallel circuit. I can recognize the function of circuit breakers and fuses in a home’s electrical box. I can calculate electrical power. I can calculate the electrical energy used by a device. I can identify conductors and insulators and describe their
potential energy volt(V=J/C) electric energy (E= Pt) potential difference electric current: ampere (A=C/s) series circuit parallel circuit electric power (watts)
Class Demonstration of
Series and parallel circuits using Energy
Ball.
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
interaction. Examples of models could include drawings, diagrams, and texts, such as drawings of what happens when two charges of opposite polarity are near each other. HS-‐PS3-‐5 (NGSS) “Electrical energy” may mean energy stored in a battery or energy transmitted by electric currents. (secondary to HS-‐PS2-‐5),(NGSS)(ODE)
common characteristics OR I can design and conduct a series and parallel circuit.
Identifying Conductors and Insulators Lab pg. 406 or Comparing Series and Parallel
Circuits Lab pg. 414-‐415
Lab Report
Content Elaborations: Transfer and Transformation of Energy: In middle school, concepts of energy transfer and transformation were addressed, including conservation of energy, conduction, convection and radiation, the transformation of electrical energy, and the dissipation of energy into thermal energy. Work also was introduced as a method of energy transfer into or out of the system when an outside force moves an object over a distance. In this course, these concepts are further developed. As long as the force, F, and displacement, Δx, are in the same direction, work, W, can be calculated from the equation W= FΔx. Energy transformations for a phenomenon can be represented through a series of pie graphs or bar graphs. Equations for work, kinetic energy and potential energy can be combined with the law of conservation of energy to solve problems. When energy is transferred from one system to another, some of the energy is transformed to thermal energy. Since thermal energy involves the random movement of many trillions of subatomic particles, it is less able to be organized to bring about further change. Therefore, even though the total amount of energy remains constant, less energy is available for doing useful work. Thermal Energy In middle school, thermal energy is introduced as the energy of movement of the particles that make up matter. Processes of heat transfer, including conduction, convection and radiation, are studied. In other sections of this course, the role of thermal energy during heating, cooling, and phase changes is explored conceptually and graphically. In this course, rates of thermal energy transfer and thermal equilibrium are introduced. Thermal conductivity depends on the rate at which thermal energy is transferred from one end of a material to another. Thermal conductors have a high rate of thermal energy transfer and thermal insulators have a slow rate of thermal energy transfer. The rate at which thermal radiation is absorbed or emitted by a system depends on its temperature, color, texture and exposed surface area. All other things being equal, in a given amount of time, black rough surfaces absorb more thermal energy than smooth white surfaces. An object or system is continually absorbing and emitting thermal radiation. If the object or system absorbs more thermal energy than it emits and there is no change in phase, the temperature increases. If the object or system emits more thermal energy than is absorbed and there is no change in phase, the temperature decreases. For an object or system in thermal equilibrium, the amount of thermal energy absorbed is equal to the amount of thermal energy emitted; therefore, the temperature remains constant. In chemistry, changes in thermal energy are quantified for substances that change their temperature. Electricity In earlier grades, these concepts were introduced: electrical conductors and insulators; and a complete loop is needed for an electrical circuit that may be parallel or in a series. In this course, circuits are explained by the flow of electrons, and current, voltage and resistance are introduced conceptually to explain what was observed in middle school. The differences between electrical conductors and insulators can be explained by how freely the electrons flow throughout the material due to how firmly electrons are held by the nucleus. By convention, electric current is the rate at which positive charge flows in a circuit. In reality, it is the negatively charged electrons that are actually moving. Current is
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
measured in amperes (A), which is equal to one coulomb of charge per second (C/s). In an electric circuit, the power source supplies the electrons already in the circuit with electric potential energy by doing work to separate opposite charges. For a battery, the energy is provided by a chemical reaction that separates charges on the positive and negative sides of the battery. This separation of charge is what causes the electrons to flow in the circuit. These electrons then transfer energy to other objects and transform electrical energy into other forms (e.g., light, sound, heat) in the resistors. Current continues to flow, even after the electrons transfer their energy. Resistors oppose the rate of charge flow in the circuit. The potential difference or voltage across an energy source is a measure of potential energy in Joules supplied to each coulomb of charge. The volt (V) is the unit of potential difference and is equal to one Joule of energy per coulomb of charge (J/C). Potential difference across the circuit is a property of the energy source and does not depend upon the devices in the circuit. These concepts can be used to explain why current will increase as the potential difference increases and as the resistance decreases. Experiments, investigations and testing (3-‐D or virtual) must be used to construct a variety of circuits, and measure and compare the potential difference (voltage) and current. Electricity concepts are dealt with conceptually in this course. Calculations with circuits will be addressed in the physics syllabus.
End Early 2nd Quarter (4.5 Weeks) District Short
Cycle Assessment
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
Physical Science – Late 2nd Quarter
Topic Content Statement Days Clear Learning Target Vocabulary Core Resource Additional
Resources Assessment
Energy and Waves (ODE) (HS-‐PS4)NGSS
Radiant Energy and the Electromagnetic Spectrum Use mathematical representations to support a claim regarding relationships among the frequency, wavelength, and speed of waves traveling in various media. Examples of data could include electromagnetic radiation traveling in a vacuum and glass, sound waves traveling through air and water, and seismic waves traveling through the Earth. HS-‐PS4-‐1. Refraction, reflection, diffraction, absorption, superposition.
1 day 2
days
I do recognize that waves transfer energy but not matter. I can define a mechanical wave. I can compare and contrast transverse and compressional waves. I can define wavelength, frequency, period and amplitude. I can describe the relationship between frequency and wavelength. I can explain how a wave’s energy and amplitude are related. I can calculate wave speed. (v= λ *⨍)
wave medium transverse wave compressional crest trough rarefaction wavelength (λ) frequency period(P) sonar amplitude refraction diffraction resonance interference (constructive, destructive) standing wave resonance Hertz (Hz) wave speed (v)
Physical Science w/Earth
Science Chapter 10:Waves
Sections1,2,3 Conceptual Physical
Science Chapter 10
slinky, wave generator, laser, bubble wrap, concave and convex mirrors,
concave and convex lenses,
infrared thermometer,
x rays, radioactive rocks,
vegetable oil, beakers, test tubes, prism, ultraviolet (uv)
beads, polarizing filters,
stereo/stereo speakers.
Chapter 10 Test: Waves
Strand: Physical Science
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
Energy and Waves (ODE) (HS-‐PS4)NGSS
Doppler Shift
3 days 3
days 1 day
I can state the law of reflection. I can explain why waves change direction when they travel from one material to another. I can compare and contrast refraction and diffraction. I can describe how waves can interfere with one another (constructive, destructive) I can explain how sound travels through different mediums. I can explain the different properties of sound. I can explain and give an example of the Doppler effect. I can identify ways sound can be used (echolocation, sonar, ultrasound) I can describe how light waves interact
intensity, loudness, decibel, pitch, Doppler effect, opaque, translucent, transparent, index of refraction, plane mirror, concave mirror, convex
Physical Science w/Earth
Science Chapter 11: Sound and Light, Sections
1,2,3,4.
Conceptual Physical
Science Chapter
Online Hearing Test
http://www.noiseaddicts.com/2009/03/can-‐you-‐hear-‐this-‐hearing-‐test/ Hearing test app on iPad
Online Test for Color
Chapter 11 Test: Sound and Light
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
Energy and Waves (ODE) (HS-‐PS4) NGSS
Waves
2
days 2
days
with matter. I can explain the difference between regular and diffuse reflection. I can define the index of refraction of a material. I can explain why a prism separates white light into different colors. I can describe how images are formed by three types of mirrors. I can explain how convex and concave lenses form images. I can explain how the human eye enables you to see. I can describe how lenses are used to correct vision problems. I can explain how you see color.
mirror, convex lens, concave lens.
11,12
Blindness. http://colorvisiontesting.com/ishihara.htm
Color Blindness Test app on
iPad
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
Energy and Waves (ODE) (HS-‐PS4)NGSS
Radiant Energy and the Electromagnetic Spectrum Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy. Examples could include solar cells capturing light and converting it to electricity; medical imaging; and communications technology. Assessments do not include band theory. HS-‐PS4-‐5.(NGSS)
1 day
2
days
3
days
I can describe the difference between light color and pigment color. I can predict what happens when different colors are mixed. I can describe how electric and magnetic fields form electromagnetic waves. I can explain how vibrating charges produce electromagnetic waves (natural frequency). I can describe the properties of electromagnetic waves. I can describe the differences between the different waves on the electromagnetic spectrum in terms of frequency, speed, and wavelength.
electromagnetic wave radiant energy photon transverse wave longitudinal wave natural frequency standing wave Doppler effect bow wave shock wave sonic boom radio wave microwave infrared wave light wave ultraviolet wave x ray gamma wave wave-‐particle duality theorem carrier wave (AM, FM radio) cathode ray tube
Physical Science w/Earth
Science Chapter 15:Electromagnetic Radiation, Sections 1,2,3
Chapter 15 Test:
Electromagnetic Radiation
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
1 day
I can compare the properties of different electromagnetic waves. I can identify uses for different types of electromagnetic waves. I can explain how modulating carrier waves enable information to be transmitted by radio waves, AM-‐amplitude modulation. and FM-‐frequency modulation. I can identify various ways that electromagnetic waves are used in technology every day.
modulate transceiver GPS
Content Elaborations: Waves As addressed in middle school, waves transmit energy from one place to another, can transfer energy between objects and can be described by their speed, wavelength, frequency and amplitude. The relationship between speed, wavelength and frequency also was addressed in middle school Earth and Space Science where the motion of seismic waves through different materials is studied. Investigate the relationship between speed, frequency and wavelength for a transverse wave traveling through a Slinky®. Make claims about what happens to the speed and the wavelength of the wave as the frequency is increased and give evidence to support any claims. For example, use information from the investigation to explore the implications of cell phone usage. Include beneficial and harmful aspects of the use of this technology for a modern convenience. Present findings and draw a conclusion using data and research in multiple formats.
Lorain City School District Scope, Sequence and Pacing Guides
CCSS HS Physical Science
Common Formative Assessments will be implemented daily.
In elementary and middle school, reflection and refraction of light were introduced, as was absorption of radiant energy by transformation into thermal energy. In this course, these processes are addressed from the perspective of waves and expanded to include other types of energy that travel in waves. When a wave encounters a new material, the new material may absorb the energy of the wave by transforming it to another form of energy, usually thermal energy. Waves can be reflected off solid barriers or refracted when a wave travels form one medium into another medium. Waves may undergo diffraction around small obstacles or openings. When two waves traveling through the same medium meet, they pass through each other then continue traveling through the medium as before. When the waves meet, they undergo superposition, demonstrating constructive and destructive interference. Sound travels in waves and undergoes reflection, refraction, interference and diffraction. In the physics syllabus, many of these wave phenomena will be studied further and quantified. Radiant energy travels in waves and does not require a medium. Sources of light energy (e.g., the sun, a light bulb) radiate energy continually in all directions. Radiant energy has a wide range of frequencies, wavelengths and energies arranged into the electromagnetic spectrum. The electromagnetic spectrum is divided into bands: radio (lowest energy), microwaves, infrared, visible light, X-‐rays and gamma rays (highest energy) that have different applications in everyday life. Radiant energy of the entire electromagnetic spectrum travels at the same speed in a vacuum. Specific frequency, energy or wavelength ranges of the electromagnetic spectrum are not required. However, the relative positions of the different bands, including the colors of visible light, are important (e.g., ultraviolet has more energy than microwaves). Radiant energy exhibits wave behaviors including reflection, refraction, absorption, superposition and diffraction, depending in part on the nature of the medium. For opaque objects (e.g., paper, a chair, an apple), little if any radiant energy is transmitted into the new material. However the radiant energy can be absorbed, usually increasing the thermal energy of the object and/or the radiant energy can be reflected. For rough objects, the reflection in all directions forms a diffuse reflection and for smooth shiny objects, reflections can result in clear images. Transparent materials transmit most of the energy through the material but smaller amounts of energy may be absorbed or reflected. Changes in the observed frequency and wavelength of a wave can occur if the wave source and the observer are moving relative to each other. When the source and the observer are moving toward each other, the wavelength is shorter and the observed frequency is higher; when the source and the observer are moving away from each other, the wavelength is longer and the observed frequency is lower. This phenomenon is called the Doppler shift and can be explained using diagrams. This phenomenon is important to current understanding of how the universe was formed and will be applied in later sections of this course. Calculations to measure the apparent change in frequency or wavelength are not appropriate for this course.
End Late 2nd Quarter (9 Weeks)
District Short Cycle
Assessment
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Physical Science – Early 3rd Quarter Strand: Physical Science
Topic Content Statement Days Clear Learning Target Vocabulary Core Resource Additional
Resources Assessment
Study of Matter
Classification of Matter Heterogeneous vs. homogeneous Properties of matter States of matter and its changes(ODE) Plan and conduct an investigation to gather evidence to compare the structure of substances at the bulk scale to infer the strength of electrical forces between particles. Clarification Statement: Emphasis is on understanding the strengths of forces between particles, not on naming specific intermolecular forces (such as dipole-‐dipole). Examples of particles could include ions, atoms, molecules, and networked materials (such as graphite). Examples of bulk properties of substances could include the melting point and boiling point, vapor pressure, and surface tension.(NGSS HS-‐PS1-‐3.)
3 days 4
days
I can define substances and mixtures. I can identify elements and compounds. I can compare and contrast solutions, colloids, and suspensions. I can identify substances using physical properties. I can compare and contrast physical and chemical changes. I can identify chemical changes. I can determine how the law of conservation of mass applies to chemical changes.
substance element compound heterogeneous homogeneous solution colloid Tyndall effect suspension physical property physical change distillation chemical property chemical change law of conservation of mass
Physical Science with Earth Science Chapter
18:Classification of Matter, Sections 1,2 Conceptual Physical Science
Chapter 15
Chapter exercises and problems in Chapter 18 Review pages 572-‐573.
Measuring the Conservation of Mass Lab pg 568. (antacid tablets, balloons, balance, beaker, plastic
bottle, mortar/pestle,
funnel)
Chapter 18 Test:
Classification of Matter
Lab Report
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Study of Matter
Atoms Models of the atom (proton, neutron, electron, quarks, electron cloud) Ions (cations and anions): charged particles that have either more or less electrons than protons. Isotopes: atoms of the same element that have a different number of neutrons. Periodic Trends of the Elements (atomic size, ionization energy, electronegativity, density) Periodic law: physical and chemical properties of the elements recur in a systematic and predictable way when the elements are arranged in order of increasing atomic number. Representative groups (alkali metal, alkali earth metal, halogen, noble gas, transition metal, inner transition metals,
1 day 2
days
3
days
3
days
I can conduct an experiment to show the conservation of mass with antacid tablets. I can identify the names and symbols of common elements. I can identify quarks as subatomic particles of matter. I can describe the electron cloud model of an atom. I can explain how electrons are arranged in an atom. I can compute the atomic mass and mass number of an atom. I can identify the components of isotopes. I can interpret the average atomic
atom nucleus proton neutron electron quark electron cloud atomic number mass number isotope average atomic mass periodic table group electron dot diagram period
Physical Science with Earth Science Chapter
19:Properties of Atoms and the Periodic Table, Sections
1,2,3 Conceptual Physical Science Chapter
16(contains periodic law and periodic trends)
http://www.sparknotes.com/chemistry/fundamentals/atomicstructure/section3.rhtml
http://chemwiki.ucdavis.edu/
Chapter exercises and problems in Chapter 19
Review pgs. 602-‐603
Element Naming and Symbol Quizzes
Chapter 19: Properties of Atoms and the Periodic Table Test
Periodic Law and Periodic
Trends Quiz on Notes from web sites.
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Study of Matter
lanthanides, actinides. (ODE)
1 day 1 day
mass of an element. I can explain the composition of the periodic table. I can use the periodic table to obtain information. I can explain what a metal, nonmetal, and a metalloid mean. I can identify the different properties of groups/families in the periodic table. I can explain how periodic law explains the arrangement of atoms on the periodic table. I can describe the different periodic trends (atomic size, ionization energy, density, electronegativity) on the periodic table. I can explain how
Inorganic_Chemistry/Descriptive_Chemistry/Periodic_Table_of_the_Elements/Periodic_Tr
ends
http://www.elementalmatter.info/periodic-‐law.htm
http://chemwiki.ucdavis.edu/Inorganic_Chemistry/Descriptive_Chemistry/Periodic_Table_of_the_Elements/The_Period
ic_Law
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
the different periodic trends determine the location and reactivity of different elements on the periodic table. I can research the name, symbol, history, uses and structure of an individual atom.
Alien Periodic Table Lab/ Begin
What’s in a Name? Research on Elements.
Content Elaborations: Classification of Matter Matter was introduced in the elementary grades and the learning progression continued through middle school to include differences in the physical properties of solids, liquids and gases, elements, compounds, mixtures, molecules, kinetic and potential energy and the particulate nature of matter. Content in the chemistry syllabus (e.g., electron configuration, molecular shapes, and bond angles) will be developed from concepts in this course. Matter can be classified in broad categories such as homogeneous and heterogeneous or classified according to its composition or by its chemical (reactivity) and physical properties (e.g., color solubility, odor, hardness, density, melting point and boiling point, viscosity and malleability). Solutions are homogenous mixtures of a solute dissolved in a solvent. The amount of a solid solute that can dissolve in a solvent generally increases as the temperature increases since the particles have more kinetic energy to overcome the attractive forces between them. Water is often used as a solvent since so many substances will dissolve in water. Physical properties can be used to separate the substances in mixtures, including solutions. Phase changes can be represented by graphing the temperature of a sample vs. the time it has been heated. Investigations must include collecting data during heating, cooling and solid-‐liquid-‐ solid phase changes. At times, the temperature will change steadily, indicating a change in the motion of the particles and the kinetic energy of the substance. However, during a phase change, the temperature of a substance does not change, indicating there is no change in kinetic energy. Since the substance continues to gain or lose energy during phase changes, these changes in energy are potential and indicate a change in the position of the particles. When heating a substance, a phase change will occur when the kinetic energy of the particles is great enough to overcome the attractive forces between the particles; the substance then melts or boils. Conversely, when cooling a substance, a phase change will occur when the kinetic energy of the particles is no longer great enough to overcome the attractive forces between the particles; the substance then condenses or freezes. Phase changes are examples of changes that can occur when energy is absorbed from the surroundings (endothermic) or released into the surroundings (exothermic). When thermal energy is added to a solid, liquid or gas, most substances increase in volume because the increased kinetic energy of the particles causes an increased distance between the particles. This results in a change in density of the material. Generally, solids have greater density than liquids, which have greater density than gases due to the spacing between the particles. The density of a substance can be calculated from the slope of a mass vs. volume graph. Differences in densities can be determined by interpreting mass vs. volume graphs of the substances. Atoms
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Content introduced in middle school, where the atom was introduced as a small, indestructible sphere, is further developed in the physical science syllabus. Over time, technology was introduced that allowed the atom to be studied in more detail. The atom is composed of protons, neutrons and electrons that have measurable properties, including mass and, in the case of protons and electrons, a characteristic charge. When bombarding thin gold foil with atomic-‐sized, positively charged, high-‐speed particles, a few of the particles were deflected slightly from their straight-‐line path. Even fewer bounced back toward the source. This evidence indicates that most of an atom is empty space with a very small positively charged nucleus. This experiment and other evidence indicate the nucleus is composed of protons and neutrons, and electrons that move about in the empty space that surrounds the nucleus. Additional experimental evidence that led to the development of other historic atomic models will be addressed in the chemistry syllabus. All atoms of a particular element have the same atomic number; an element may have different isotopes with different mass numbers. Atoms may gain or lose electrons to become anions or cations. Atomic number, mass number, charge and identity of the element can be determined from the numbers of protons, neutrons and electrons. Each element has a unique atomic spectrum that can be observed and used to identify an element. Atomic mass and explanations about how atomic spectra are produced are addressed in the chemistry syllabus. Periodic Trends of the Elements Content from the middle school level, specifically the properties of metals and nonmetals and their positions on the periodic table, is further expanded in this course. When elements are listed in order of increasing atomic number, the same sequence of properties appears over and over again; this is the periodic law. The periodic table is arranged so that elements with similar chemical and physical properties are in the same group or family. Metalloids are elements that have some properties of metals and some properties of nonmetals. Metals, nonmetals, metalloids, periods and groups or families including the alkali metals, alkaline earth metals, halogens and noble gases can be identified by their position on the periodic table. Elements in Groups 1, 2 and 17 have characteristic ionic charges that will be used in this course to predict the formulas of compounds. Other trends in the periodic table (e.g., atomic radius, electronegativity, ionization energies) are found in the chemistry syllabus.
End Early 3rd Quarter (4.5 Weeks) District
Short Cycle Assessment
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Physical Science –Late 3rd Quarter Strand: Physical Science
Strand: Physical Science
Content Statement Days Clear Learning Target Vocabulary Core Resource Additional
Resources Assessment
Study of Matter
Study of Matter
Bonding and Compounds Bonding (ionic and covalent)
2 days 4
days
I can describe how a compound differs from its component elements. I can explain what a chemical formula represents. I can explain that the electric forces between electrons and protons, which are oppositely charged, are essential to forming compounds. I can state a reason why chemical bonding occurs. I can describe ionic and covalent bonds. I can identify the
chemical formula ion chemical bond ionic bond covalent bond molecule polar molecule nonpolar molecule binary compound oxidation number polyatomic ion hydrate
Physical Science with Earth Science Chapter 22: Chemical
Bonds Sections 1,2,3
Conceptual Physical Science
Chapter 17
Chapter exercises and problems in Chapter 22
Review on pgs. 714-‐715
Model Atom Kits
Chapter 22 Test:
Chemical Bonds
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Study of Matter
Nomenclature Begin Atom Model Assignment Reactions of Matter: Chemical Reactions
4
days 1 day 2
days
particles produced by ionic bonding and covalent bonding. I can distinguish between a nonpolar covalent bond and a polar covalent bond. I can explain how to determine oxidation numbers. I can write formula’s and names for ionic compounds. I can write formula’s and names for covalent compounds. I can construct a model of an atom following specific guidelines. I can identify the reactants and products in a chemical reaction. I can determine how a chemical reaction satisfies the law of conservation of
chemical reaction reactant product chemical equation balanced chemical equation combustion
Physical Science with Earth Science Chapter 23: Chemical Reactions
Sections 1,2,3,4 Conceptual Physical
Chapter exercises and problems from Chapter 23 Review on pgs.
746-‐747
Chapter 23
Test: Chemical Reactions
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Reactions of Matter: Chemical Reactions
3
days 3
days
3
days
mass. I can determine how chemists express chemical changes using equations. I can identify what is meant by a balanced chemical equation. I can determine how to write balanced chemical equations. I can identify the five general types of chemical reactions. I can identify redox reactions. I can predict which metal will replace other metals in compounds. I can identify the source of energy changes in chemical reactions. I can compare and contrast exergonic and endergonic reactions(chemical
reaction synthesis reaction decomposition reaction single replacement reaction double replacement reaction activation energy endothermic reaction rate of reaction exothermic reaction catalyst inhibitor
Science Chapter 19
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
1 day
rx’s that gain or release energy) I can examine the effects of catalysts and inhibitors on the speed of chemical reactions.
Content Elaborations: Bonding and Compounds: Middle school content included compounds which are composed of atoms of two or more elements joined together chemically. In this course, the chemical joining of atoms is studied in more detail. Atoms may be bonded together by losing, gaining or sharing electrons to form molecules or three-‐ dimensional lattices. An ionic bond involves the attraction of two oppositely charged ions, typically a metal cation and a nonmetal anion formed by transferring electrons between the atoms. An ion attracts oppositely charged ions from every direction, resulting in the formation of a three-‐ dimensional lattice. Covalent bonds result from the sharing of electrons between two atoms, usually nonmetals. Covalent bonding can result in the formation of structures ranging from small individual molecules to three-‐dimensional lattices (e.g., diamond). The bonds in most compounds fall on a continuum between the two extreme models of bonding: ionic and covalent. Using the periodic table to determine ionic charge, formulas of ionic compounds containing elements from groups 1, 2, 17, hydrogen and oxygen can be predicted. Given a chemical formula, a compound can be named using conventional systems that include Greek prefixes where appropriate. Prefixes will be limited to represent values from one to 10. Given the name of an ionic or covalent substance, formulas can be written. Naming organic molecules is beyond this grade level and is reserved for an advanced chemistry course. Prediction of bond types from electronegativity values, polar covalent bonds, writing formulas and naming compounds that contain polyatomic ions or transition metals will be addressed in the chemistry syllabus. Reactions of Matter In middle school, the law of conservation of matter was expanded to chemical reactions, noting that the number and type of atoms and the total mass are the same before and after the reaction. In this course, conservation of matter is expressed by writing balanced chemical equations. At this level, reactants and products can be identified from an equation and simple equations can be written and balanced given either the formulas of the reactants and products or a word description of the reaction. Stoichiometric relationships beyond the coefficients in a balanced equation and classification of types of chemical reactions are addressed in the chemistry syllabus. During chemical reactions, thermal energy is either transferred from the system to the surroundings (exothermic) or transferred from the surroundings to the system (endothermic). Since the environment surrounding the system can be large, temperature changes in the surroundings may not be detectable.
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Physical Science Atom Model Project
Topic Content Statement Days Clear Learning Target Vocabulary Core Resource Additional
Resources Assessment
Study of Matter
The student will be able to accurately construct a three dimensional representation of the Bohr model of an atom with a key and explain the history, uses of that atom and its structural components to their peers. The atom may have a theme. The atom must be an atom with atomic number 10 or greater.
5 days
I can construct a three dimensional Bohr model of an atom w/key of a chosen atom beyond atomic #10 and explain the uses, structure, and provide examples of that element.
nucleus neutron electron rings electron proton atomic mass atomic number electron configuration
Physical Science with Earth Science. Conceptual Physical Science.
Book: The Elements
Online resources and iPad apps. Atom Model Rubric
Rubric and Presentation of Atom Model to Peers
End Late 3rd Quarter (9 Weeks) District
Short Cycle Assessment
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Physical Science – Early 4th Quarter Strand: Physical Science
Topic Content Statement Days Clear Learning Target Vocabulary Core Resource Additional Resources Assessment
Study of Matter
Reactions of Matter: Nuclear Reactions
2 days
2
days
I can describe the structure of an atom and its nucleus. I can explain what radioactivity is. I can compare and contrast properties of radioactive and stable nuclei. I can discuss the discovery of radioactivity. I can compare and contrast alpha, beta, and gamma radiation. I can define the half-‐ life of a radioactive material. I can describe the process of radioactive dating. I can describe how radioactivity can be detected in cloud and bubble chambers. I can explain how an electroscope can be used to detect radiation.
strong force radioactivity alpha particle transmutation beta particle gamma ray half-‐ life cloud chamber bubble chamber Geiger counter nuclear fission chain reaction critical mass nuclear fusion tracer
Physical Science with Earth Science, Chapter 25: Nuclear Changes, Sections 1,2,3,4.
Conceptual Physical Science,
Chapter 14
Chapter exercises and problems for
Chapter 25 Review on pgs.
812-‐813
Radioactive materials such as a smoke detector, older orange Fiesta ware plates, cups, dishes, granite rocks, Coleman white/pink mantles for camping lanterns,
luminescent watch dials,
radioactive salts, Geiger Counter.
Radon air/water detection kits can be purchased at Home Depot, Lowe’s(school testing project)
Chapter 25 Test: Nuclear Changes
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Study of Matter
Energy and Waves
Reactions of Matter: Nuclear Reactions Definitions of Energy “electrical energy” may mean energy stored in a battery or energy transmitted by electric currents. PS3.A (secondary to
2
days
3
days
3
days
I can explain how a Geiger counter can measure nuclear radiation. I can explain nuclear fission and how it can begin a chain reaction. I can discuss how nuclear fusion occurs in the Sun. I can describe how radioactive tracers can be used to diagnose medical problems. I can discuss how nuclear reactions can help treat cancer. I can discuss the properties and uses of fossil fuels. I can explain how fossil fuels are formed. I can describe how the chemical energy in fossil fuels is converted into electrical energy. I can explain how a nuclear reactor converts nuclear energy to thermal energy. I can describe advantages and disadvantages of using nuclear energy to produce
fossil fuel petroleum nonrenewable resource, nuclear reactor nuclear waste renewable
Physical Science with Earth Science, Chapter 16: Energy Sources,
Sections 1, 2, 3.
MRI test films from local hospitals.
Chapter exercises and problems for
Chapter 16 Review on pgs 512-‐513
Ohio Energy Project.(Free labs
Chapter 16 Test: Energy Sources
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Energy and Waves
HS-‐PS2-‐5) NGSS. Transfer and Transformation of Energy (ODE) Defining and Delimiting Engineering Problems: Criteria and constraints also include satisfying any requirements set by society, such as taking issues of risk mitigation into account, and they should be quantified to the extent possible and stated in such a way that one can tell if a given design meets them. ETS1.A: (secondary to HS-‐PS2-‐3)(NGSS)(ODE) Optimizing the Design Solution § Criteria may need to be broken down into simpler ones that can be approached systematically, and decisions about the
2
days
4
days
1 day
2 day
electricity. I can discuss nuclear fusion as a possible energy source. I can analyze the need for alternate energy sources. I can describe alternate methods for generating electricity. I can compare the advantageous and disadvantages of various alternate energy sources. I can understand that the color of an object does determine the rate at which an object absorbs solar energy. I can research the various sources of energy used in different areas of the United States and determine the cost and effects of those energy sources on the environment.
resource photovoltaic cell hydroelectricity geothermal energy, biomass
Conceptual Physical Science, Chapter
Solar Heating Lab, pg 507 in PS w/ES.
Internet Lab: How much does energy really cost? Pg.
508-‐509
and merchandise for the
classroom) http://www.ohioenergy.org/
Lab Report
Lab Report
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
priority of certain criteria over others (trade-‐offs) may be needed. ETS1.C (secondary to HS-‐PS2-‐3)(NGSS, ODE)
Content Elaborations: While chemical changes involve changes in the electrons, nuclear reactions involve changes to the nucleus and involve much larger energies than chemical reactions. The strong nuclear force is the attractive force that binds protons and neutrons together in the nucleus. While the nuclear force is extremely weak at most distances, over the very short distances present in the nucleus the force is greater than the repulsive electrical forces among protons. When the attractive nuclear forces and repulsive electrical forces in the nucleus are not balanced, the nucleus is unstable. Through radioactive decay, the unstable nucleus emits radiation in the form of very fast-‐moving particles and energy to produce a new nucleus, thus changing the identity of the element. Nuclei that undergo this process are said to be radioactive. Radioactive isotopes have several medical applications. The radiation they release can be used to kill undesired cells (e.g., cancer cells). Radioisotopes can be introduced into the body to show the flow of materials in biological processes. For any radioisotope, the half-‐life is unique and constant. Graphs can be constructed that show the amount of a radioisotope that remains as a function of time and can be interpreted to determine the value of the half-‐life. Half-‐life values are used in radioactive dating. Other examples of nuclear processes include nuclear fission and nuclear fusion. Nuclear fission involves splitting a large nucleus into smaller nuclei, releasing large quantities of energy. Nuclear fusion is the joining of smaller nuclei into a larger nucleus accompanied by the release of large quantities of energy. Nuclear fusion is the process responsible for formation of all the elements in the universe beyond helium and the energy of the sun and the stars. Further details about nuclear processes including common types of nuclear radiation, predicting the products of nuclear decay, mass-‐energy equivalence and nuclear power applications are addressed in the chemistry and physics syllabi.
End Early 4th Quarter (4.5 Weeks) District
Short Cycle Assessment
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Physical Science -‐ Late 4th Quarter
Strand: Physical Science
Topic Content Statement Days Clear Learning Target Vocabulary Core Resource Additional
Resources Assessment
2nd Semester Atom Project Presentations
The Universe
The Universe
The Atom Model Project Presentations History of the Universe(ODE) Stars: Formation, stages of evolution Fusion in Stars
5 days 3
days
3
days
I can make a self-‐ standing 3D model of an atom with a key and present its history, components, and uses to my peers I can describe a constellation as a pattern of stars. I can compare and contrast types of optical telescopes. I can explain how a radio telescope differs from an optical telescope. I can explain how stars form. I can classify the stages of stellar evolution using a Hertzsprung-‐Russel (H-‐R) diagram.
See Quarter #3 constellation refracting telescope reflecting telescope radio telescope light-‐ year spectroscope main sequence giant white dwarf solar mass photosphere sunspots galaxy Milky Way Local Group cosmology big bang theory, dark matter dark energy
See Quarter #3 Physical Science with Earth Science, Chapter 26: Stars and Galaxies, Sections 1,2,3,4. Conceptual Physical Science, Chapter 29,30
See Quarter #3 Atom Model Rubric Chapter 26 Test: Stars and Galaxies
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Galaxy Formation Semester 2 Final Exam Review
2
days 3
days
4
days
1 day
I can describe the Sun and explain how it has and will evolve. I can explain that the same natural laws that apply in the Milky Way Galaxy also apply in other galaxies. I can describe the Milky Way Galaxy and the Sun’s position in it. I can describe the most accepted theory about the origin of the universe. I can define dark matter. I can explain how dark energy may cause the universe to expand forever.
Semester 2 Final Exam Review Sheet
Lorain City School District Scope, Sequence and Pacing Guides
HS Physical Science
Common Formative Assessments will be implemented daily.
Content Elaborations: The Universe -‐ In early elementary school, observations of the sky and space are the foundation for developing a deeper knowledge of the solar system. In late elementary school, the parts of the solar system are introduced, including characteristics of the sun and planets, orbits and celestial bodies. At the middle school level, energy, waves, gravity and density are emphasized in the physical sciences, and characteristics and patterns within the solar system are found. In the physical science course, the universe and galaxies are introduced, building upon the previous knowledge about space and the solar system in the earlier grades. History of the Universe -‐ The Big Bang Model is a broadly accepted theory for the origin and evolution of our universe. It postulates that 12 to 14 billion years ago, the portion of the universe seen today was only a few millimeters across (NASA). According to the “big bang” theory, the contents of the known universe expanded explosively into existence from a hot, dense state 13.7 billion years ago (NAEP 2009). After the big bang, the universe expanded quickly (and continues to expand) and then cooled down enough for atoms to form. Gravity pulled the atoms together into gas clouds that eventually became stars, which comprise young galaxies. Foundations for the big bang model can be included to introduce the supporting evidence for the expansion of the known universe (e.g., Hubble’s law and red shift or cosmic microwave background radiation). A discussion of Hubble’s law and red shift is found in the Galaxy formation section, below. Technology provides the basis for many new discoveries related to space and the universe. Visual, radio and x-‐ray telescopes collect information from across the entire electromagnetic spectrum; computers are used to manage data and complicated computations; space probes send back data and materials from remote parts of the solar system; and accelerators provide subatomic particle energies that simulate conditions in the stars and in the early history of the universe before stars formed. Galaxy Formation-‐ A galaxy is a group of billions of individual stars, star systems, star clusters, dust and gas bound together by gravity. There are billions of galaxies in the universe, and they are classified by size and shape. The Milky Way is a spiral galaxy. It has more than 100 billion stars and a diameter of more than 100,000 light years. At the center of the Milky Way is a bulge of stars, from which are spiral arms of gas, dust and most of the young stars. The solar system is part of the Milky Way galaxy. Hubble’s law states that galaxies that are farther away have a greater red shift, so the speed at which a galaxy is moving away is proportional to its distance from the Earth. Red shift is a phenomenon due to Doppler shifting, so the shift of light from a galaxy to the red end of the spectrum indicates that the galaxy and the observer are moving farther away from one another. Doppler shifting also is found in the Energy and Waves section of this course. Stars -‐ Early in the formation of the universe, stars coalesced out of clouds of hydrogen and helium and clumped together by gravitational attraction into galaxies. When heated to a sufficiently high temperature by gravitational attraction, stars begin nuclear reactions, which convert matter to energy and fuse the lighter elements into heavier ones. These and other fusion processes in stars have led to the formation of all the other elements. (NAEP 2009). All of the elements, except for hydrogen and helium, originated from the nuclear fusion reactions of stars (College Board Standards for College Success, 2009). Stars are classified by their color, size, luminosity and mass. A Hertzprung-‐Russell diagram must be used to estimate the sizes of stars and predict how stars will evolve. Most stars fall on the main sequence of the H-‐R diagram, a diagonal band running from the bright hot stars on the upper left to the dim cool stars on the lower right. A star’s mass determines the star’s place on the main sequence and how long it will stay there. Patterns of stellar evolution are based on the mass of the star. Stars begin to collapse as the core energy dissipates. Nuclear reactions outside the core cause expansion of the star, eventually leading to the collapse of the star. Note: Names of stars and naming the evolutionary stage of a star from memory will not be assessed. The emphasis is on the interpretation of data (using diagrams and charts) and the criteria and processes needed to make those determinations.