PHS 100-1A21
2
® SKF is a registered trademark of the SKF Group © SKF Group 2012 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. Sprockets ANSI Simplex, Pilot Bore PHS 100-1A21 Pitch P (in) 1.25 No. of teeth 21 Diameter (in) 9.04 Min. bore (in) - Max. bore (in) - Hub H (in) - Hub L (in) - Weight (lbs) 9.8
-
Upload
daniel-nunez-hernandez -
Category
Documents
-
view
217 -
download
0
Transcript of PHS 100-1A21
7/23/2019 PHS 100-1A21
http://slidepdf.com/reader/full/phs-100-1a21 1/1
® SKF is a registered trademark of the SKF Group
© SKF Group 2012
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts)
unless prior written permission is granted. Every care has been taken to ensure the accuracy of the
information contained in this publication but no liability can be accepted for any loss or damage whether
direct, indirect or consequential arising out of the use of the information contained herein.
SprocketsANSI Simplex, Pilot Bore
PHS 100-1A21
Pitch P (in) 1.25
No. of teeth 21
Diameter (in) 9.04
Min. bore (in) -
Max. bore (in) -
Hub H (in) -
Hub L (in) -
Weight (lbs) 9.8
