PHOTOELECTRIC SENSORS WITH BACKGROUND SUPPRESSION · Photoelectric sensors with background...
Transcript of PHOTOELECTRIC SENSORS WITH BACKGROUND SUPPRESSION · Photoelectric sensors with background...
PHOTOELECTRIC SENSORS WITH BACKGROUND SUPPRESSION
� Detailed data sheets for these products can be found on the CONTRINEX website:
PHOTOELECTRIC SENSORS WITH BACKGROUND SUPPRESSION
OPERATING PRINCIPLEPhotoelectric sensors with background suppression function by using the angle of incidence, rather than the amount, of reflected light. The light pulse from the emitting diode leaves the optical system as a focused, almost parallel, light beam. On meeting an object in its path, part of the beam is dif-fusely reflected, and in turn, part of this reflected light falls on the PSD (Position-Sensitive Device) housed in the same sensor (Fig. 1). Depending on the distance of the target from the device, the light falls on a particular spot of the PSD, and a corresponding reception signal is emitted, indicating that an object is present at a certain distance from the device. The analyzing circuit compares the signal received with the preset operating distance (adjusted by means of the built-in potentiometer), and, if the distance of the object is less than, or equal to, the preset operating distance, the output is switched. Contrary to an energetic diffuse sensor, the operating distance depends only to a very small extent on the target size or color, or on the nature of its surface. The object can therefore be easily discerned, even against a light background. These devices are not suitable for objects having shiny surfaces.
AvAILABLE MODELSThe present range of photoelectric sensors with background suppression comprises cylindrical as well as rectangular models of various sizes, thus providing the user with a considerable choice.
Fig. 1
target
pos. A
pos. B
receiving optics
emitting optics
PSD (receiver)
emitter
B A
INTRODUCTION
www.contrinex.com �
The devices feature:− Large setting ranges (adjustable by means of a built-in potentiometer)− Virtually negligible blind zone− Operating distance independent of target color, shape and surface structure− High switching frequencies− High degree of protection (IP 67)
DEvICES WITH ANALOG OUTPUTThe background suppression product range includes devices with analog output with excellent white-gray characteristics. These feature a large sensing range, excellent temperature stability and an outstanding repeat accuracy. The sensing range, as with classic background suppression mod-els, is furthermore independent of the target color and surface structure. Since intermediate digitali-zation has been dispensed with, the resolution of these sensors is virtually unlimited.
fIBERSThe range furthermore includes synthetic fibers with background suppression for axial and lateral sensing. These fibers recognise position and thickness differences of only 0.1 mm and detect targets as small as 0.15 mm2 as well as wires/threads with diameters from 0.1 mm.
For suitable amplifiers, please consult our catalog "Fiber-optic solutions".
� Detailed data sheets for these products can be found on the CONTRINEX website:
MAIN fEATURES− Sensing range from 10 ...100 mm− Excellent resolution− Excellent temperature stability− Voltage output of 0 ... 5 V− Operating distance independent of target color and surface structure− Bandwidth of 100 Hz− Glass lens, easy to clean− High degree of protection: IP 67
CONNECTIONSwitches with 2 m PVC cable 3 x 0.34 mm2 are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TECHNICAL DATA
Chrome-platedbrass 10...30VDC 100Hz(ats=50mm) ≤20% ≤25mA ≤100msec
5,000Lux 10,000Lux 0...+55°C(+32...+131°F) 0.1/°C(0.06/°F) IP67 1kV Level2 Level2 Level3 Level2 Built-in Built-in Built-in
Housingmaterial SupplyvoltagerangeUB
Bandwidth(-3dB) Permissibleripplecontent No-loadsupplycurrent Timedelaybeforeavailability Max.ambientlight: halogen sun Ambienttemperaturerange Temperaturedrift%sn
Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 Short-circuitprotection Polarityreversalprotection Power-onreset
ANALOG DIffUSE SENSOR WITHBACKGROUND SUPPRESSION
www.contrinex.com �
gray
white
black
Response curve:
Housingsize Sensingrange Standardtarget Emitter Voltageoutput Currentoutput Weight
TyPE SPECIfIC DATA M12 10...100mm 100x100mmwhite LEDred660nm 0...5V --- 85g
PART REfERENCES
Partref.:(bold:preferredtypes)
Output0...5V/PVCcable2m
Wiring(page17)
LAK-1120-309
Diagram1
SERIES 1120 10 ... 100 mm
� Detailed data sheets for these products can be found on the CONTRINEX website:
MAIN fEATURES− Short housing− Setting range from 10 ... 120 mm− Sensitivity adjustment by means of the built-in potentiometer− Very small blind zone of < 1 mm− Operating distance independent of target color and surface structure− High switching frequency of 500 Hz− Glass window, easy to clean− Excellent resistance to environmental influences thanks to polyurethane potting of the electronic
module− High degree of protection: IP 67
LEDSFor reliable operation the green LED (reception indication) must light up. The yellow LED indicates the output state.
CONNECTIONSwitches with 2 m PVC cable 3 x 0.34 mm2 or 4-pole S12 connector are standard.Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TECHNICAL DATA Housingmaterial SupplyvoltagerangeUB
Permissibleripplecontent No-loadsupplycurrent Outputcurrent Outputvoltagedrop Max.switchingfrequency Switchingtime(↑and↓) Timedelaybeforeavailability Max.ambientlight: halogen sun Ambienttemperaturerange Temperaturedrift%sn
Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 Short-circuitprotection Polarityreversalprotection Power-onreset
Chrome-platedbrass 10...36VDC ≤20% ≤25mA ≤200mA ≤2.0Vat200mA 500Hz 1msec 20msec
5,000Lux 10,000Lux -25...+55°C(-13...+131°F) 0.5/°C(0.3/°F) IP67
1kV Level2 Level3 Level3 Built-in Built-in Built-in
DIffUSE SENSORS WITHBACKGROUND SUPPRESSION
www.contrinex.com �
[mm]
0 4020 8060 120100
16
12
8
4
0 [mm]
red
uctio
n in
op
erat
ing
dis
tanc
e
operating distance on white paper (90%)
black 6%
gray 18%
5
10
15
30
00 4020 8060 120100
[mm]
[mm]
20
25
red
uctio
n in
op
erat
ing
dis
tanc
e
operating distance on white paper (90%)
black 6%
gray 18%
POTyello
w
gre
en
POT
POTPOT
PART REfERENCESPartref.:(bold:preferredtypes)
NPNlight-ON/PVCcable2mNPNdark-ON/PVCcable2mNPNlight-ON/ConnectorS124-poleNPNdark-ON/ConnectorS124-polePNPlight-ON/PVCcable2mPNPdark-ON/PVCcable2mPNPlight-ON/ConnectorS124-polePNPdark-ON/ConnectorS124-poleWiring(page17)
LHK-1180W-301LHK-1180W-302LHS-1180W-301LHS-1180W-302LHK-1180W-303LHK-1180W-304LHS-1180W-303LHS-1180W-304
Diagram3
LHK-1180-301LHK-1180-302LHS-1180-301LHS-1180-302LHK-1180-303LHK-1180-304LHS-1180-303LHS-1180-304
Diagram3
Response curves:
Housingsize Settingrange Standardtarget Emitter Weight(cable/connectormodel)
TyPE SPECIfIC DATA M18 10...120mm 100x100mmwhite LEDred660nm 121g/53g
STANDARD LATERAL SENSING M18 10...120mm 100x100mmwhite LEDred660nm 124g/57g
SERIES 1180 / 1180W 10 ... 120 mm 10 ...120 mm
� Detailed data sheets for these products can be found on the CONTRINEX website:
MAIN fEATURES− Small, but robust− Setting range from 15 ... 150 mm (3030) / 15 ... 200 mm (3131)− Sensitivity adjustment by means of the built-in 12-turn potentiometer− Very small blind zone of < 1 mm− Operating distance independent of target color and surface structure− High switching frequency of 500 Hz− Glass window, easy to clean− Extremely resistant and fully-potted PBTP (Crastin) housing− High degree of protection: IP 67
LEDSFor reliable operation the green LED (reception indication) must light up. The yellow LED indicates the output state.
CONNECTIONDevices with 3 m PVC cable 4 x 0.14 mm2 (3030) or 2 m PVC cable 3 x 0.14 mm2 (3131) and 4-pole S8 (3030) or 3-pole S8 (3131) connector are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TECHNICAL DATA Housingmaterial SupplyvoltagerangeUB
Permissibleripplecontent No-loadsupplycurrent Outputcurrent Outputvoltagedrop Max.switchingfrequency Switchingtime(↑and↓) Timedelaybeforeavailability Max.ambientlight: halogen sun Ambienttemperaturerange Temperaturedrift%sn
Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 Short-circuitprotection Polarityreversalprotection Power-onreset
Glass-fiberreinforcedPBTP(Crastin) 10...36VDC ≤20% ≤25mA ≤200mA ≤2.0Vat200mA 500Hz 1msec 100msec
5,000Lux 10,000Lux -25...+55°C(-13...+131°F) 0.3/°C(0.18/°F) IP67
1kV Level2(3030)/Level3(3131) Level3 Level3 Level2(3131) Built-in Built-in Built-in
DIffUSE SENSORS WITHBACKGROUND SUPPRESSION
www.contrinex.com �
8
16
24
32
00 40 80 120 160
[mm]
[mm]
red
uctio
n in
op
erat
ing
dis
tanc
e
operating distance with white paper (90%)
gray 18 %
black 6 %re
duc
tion
in o
per
atin
g d
ista
nce
operating distance with white paper (90%)
gray 18 %
black 6 %
PART REfERENCES
Housingsize Settingrange Standardtarget Emitter Weight(cable/connectormodel)
TyPE SPECIfIC DATA 30x30x15 15...150mm 100x100mmwhite LEDred660nm 75g/17g
4-WIRE 30x30x15 15...200mm 100x100mmwhite LEDred660nm 75g/17g
3-WIRE TyPE SPECIfIC DATA Housingsize Settingrange Standardtarget Emitter Weight(cable/connectormodel)
Partref.:(bold:preferredtypes)NPNlight-ON/PVCcable2mNPNdark-ON/PVCcable2mNPNlight-ON/ConnectorS83-poleNPNdark-ON/ConnectorS83-polePNPlight-ON/PVCcable2mPNPdark-ON/PVCcable2mPNPlight-ON/ConnectorS83-polePNPdark-ON/ConnectorS83-poleWiring(page17)
Partref.:(bold:preferredtypes)NPNchangeover/PVCcable3mNPNlight-ON+recept./PVCcable3mNPNchangeover/S84-poleNPNlight-ON+reception/S84-polePNPchangeover/PVCcable3mPNPlight-ON+recept./PVCcable3mPNPchangeover/S84-polePNPlight-ON+reception/S84-poleWiring(page17)
LHK-3131-301LHK-3131-302LHS-3131-301LHS-3131-302LHK-3131-303LHK-3131-304LHS-3131-303LHS-3131-304
Diagram3
LHK-3030-101LHK-3030-102LHS-3030-101LHS-3030-102LHK-3030-103LHK-3030-104LHS-3030-103LHS-3030-104
Diagram4
Response curves:
15 ... 150 mm 15 ... 200 mmSERIES 3030 / 3131
10 Detailed data sheets for these products can be found on the CONTRINEX website:
MAIN fEATURES− Sensing range from 10 ... 100 mm− Excellent resolution (no digitalization)− Excellent temperature stability− Voltage as well as current outputs in the same device− Operating distance independent of target color and surface structure− Bandwidth of 500 Hz− Glass window, easy to clean− Extremely resistant and fully-potted PBTP (Crastin) housing− High degree of protection: IP 67
CONNECTIONSwitches with 2 m PVC cable 4 x 0.14 mm2 or 4-pole S8 connector are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
Housingmaterial SupplyvoltagerangeUB
Bandwidth(-3dB) Permissibleripplecontent No-loadsupplycurrent Timedelaybeforeavailability Max.ambientlight: halogen sun Ambienttemperaturerange Temperaturedrift%sn
Degreeofprotection EMCprotection: IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 Short-circuitprotection Polarityreversalprotection Power-onreset
TECHNICAL DATA Glass-fiberreinforcedPBTP(Crastin) 10...36VDC/15...36VDC(LA#-3130-119) 500Hz(ats=50mm) ≤20% ≤25mA ≤100msec
5,000Lux 10,000Lux -25...+55°C(-13...+131°F) 0.1/°C(0.06/°F) IP67
1kV Level3 Level3 Level3 Level2 Built-in Built-in Built-in
ANALOG DIffUSE SENSORS WITHBACKGROUND SUPPRESSION
www.contrinex.com 11
blackgraywhite
blackgraywhite
Response curves:
PART REfERENCESPartref.:(bold:preferredtypes)
Voltageandcurrentoutputs/PVCcable2mVoltageandcurrentoutputs/ConnectorS84-pole
Wiring(page17)
LAK-3130-119LAS-3130-119
Diagram2
LAK-3130-109LAS-3130-109
Diagram2
Housingsize Sensingrange Standardtarget Emitter Voltageoutput Currentoutput Weight(cable/connectormodel)
TyPE SPECIfIC DATA 30x30x15 10...100mm 100x100mmwhite LEDred660nm 0...5V 1...5mA 75g/17g
30x30x15 10...100mm 100x100mmwhite LEDred660nm 0...10V 4...20mA 75g/17g
SERIES 3130 10 ... 100 mm 10 ... 100 mm
1� Detailed data sheets for these products can be found on the CONTRINEX website:
MAIN fEATURES− Large setting range from 20 ... 500 mm− Distance setting by means of the built-in 3-turn potentiometer with position indication− Very small blind zone of < 1 mm− Operating distance independent of target color and surface structure− High switching frequency of 500 Hz− Glass window, easy to clean− Extremely resistant and fully-potted PBTP (Crastin) housing− High degree of protection: IP 67
LEDFor reliable operation the LED (reception indication) must light up green. A yellow LED indicates the output state.
CONNECTIONDevices with 2 m PVC cable 4 x 0.25 mm2 or 4-pole S12 connector are standard. Other cable types or lengths are available on request.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TECHNICAL DATA Housingmaterial SupplyvoltagerangeUB
Permissibleripplecontent No-loadsupplycurrent Outputcurrent Outputvoltagedrop Max.switchingfrequency Switchingtime(↑and↓) Timedelaybeforeavailability Max.ambientlight: halogen sun Ambienttemperaturerange Temperaturedrift%sn
Degreeofprotection EMCprotection IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 Short-circuitprotection Polarityreversalprotection Power-onreset
Glass-fiberreinforcedPBTP(Crastin) 10...36VDC ≤20% ≤30mA
≤200mA ≤2.0Vat200mA 500Hz 1msec 100msec 5,000Lux 10,000Lux -25...+55°C(-13...+131°F) 0.2/°C(0.12/°F) IP67
1kV Level3 Level3 Level3 Level2 Built-in Built-in Built-in
DIffUSE SENSOR WITHBACKGROUND SUPPRESSION
www.contrinex.com 1�
red
uctio
n in
op
erat
ing
dis
tanc
e
gray 18 %
black 6 %
operating distance with white paper (90%)Response curve:
Housingsize Settingrange Standardtarget Emitter Weight(cable/connectormodel)
TyPE SPECIfIC DATA 40x50x15 20...500mm 100x100mmwhite LEDred660nm 75g/17g
STANDARD
PART REfERENCESPartref.:(bold:preferredtypes)
NPNchangeover/PVCcable2mNPNlight-ON+reception/PVCcable2mNPNchangeover/ConnectorS124-poleNPNlight-ON+reception/S124-polePNPchangeover/PVCcable2mPNPlight-ON+reception/PVCcable2mPNPchangeover/ConnectorS124-polePNPlight-ON+reception/S124-poleWiring(page17)
LHK-4050-101LHK-4050-102LHS-4050-101LHS-4050-102LHK-4050-103LHK-4050-104LHS-4050-103LHS-4050-104
Diagram4
20 ... 500 mmSERIES 4050
1� Detailed data sheets for these products can be found on the CONTRINEX website:
MAIN fEATURES− Robust universal devices− Large setting range from 50 to 1,000 mm− Sensitivity adjustment by means of a built-in potentiometer with calibration scale and reduction
gearbox− Very small blind zone of < 1 mm− Operating distance independent of target color and surface structure− High switching frequency: 250 Hz− Glass window, easy to clean− Extremely resistant PBTP (Crastin) housing− High degree of protection: IP 67
LEDSFor reliable operation the green LED (reception indication) must light up. The yellow LED indicates the output state.
CONNECTIONDevices with 4-pole or 5-pole S12 connector or screw terminal are standard.
DOCUMENTATIONDetailed data sheets for these products can be found on the Contrinex website www.contrinex.com or ordered free of charge from our distributors.
Technical drawings can be downloaded as files from the Contrinex website and directly imported into your construction drawings.
TECHNICAL DATA
Glass-fiberreinforcedPBTP(Crastin) 10...36VDC 20...265VAC/20...320VDC ≤20% ≤50mA ≤2VA
≤200mA ≤2.0Vat200mA 250Hz 2msec 20msec(DC)/200msec(UC)
5,000Lux 10,000Lux -5...+55°C(+23...+131°F) 0.3/°C(0.18/°F) IP67
1kV Level3 Level3 Level3 Built-in Built-in Built-in
Housingmaterial DCsupplyvoltagerangeUB
UCsupplyvoltagerangeUB
Permissibleripplecontent* No-loadsupplycurrentDC*
No-loadsupplyvoltageUC** Outputcurrent* Outputvoltagedrop* Max.switchingfrequency Switchingtime(↑and↓)* Timedelaybeforeavailability Max.ambientlight: halogen sun Ambienttemperaturerange Temperaturedrift%sn
Degreeofprotection EMCprotection IEC60947-5-2 IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 Short-circuitprotection Polarityreversalprotection Power-onreset
*DCmodels(UCseedatasheet)**UCmodels
DIffUSE SENSORS WITHBACKGROUND SUPPRESSION
www.contrinex.com 1�
65
83
562
73
5,5
90o
ø5,5
8,3
(Ø 4,0 - Ø 7,0)
PG 11 (SW 22)
(26-
29)
25
32,5
25
LED* potentiometercounter
green yellow
60
50
40
30
20
10
00 200 400 600 800 1000re
duc
tion
in o
per
atin
g d
ista
nce
operating distance on white paper (90%)
gray 18 %
black 6 %
[mm]
[mm]
32,5
25
2565
83
562
73
5,515,5
25,535,5
M12x1
55,5
90o
ø 5,59,58,1
8,3
LED* potentiometercounter
green yellow
* receiver only
Response curve:
PART REfERENCESPartref.:(bold:preferredtypes)
DCNPN/ConnectorS124-poleDCNPN/ScrewterminalDCNPNtimer**/S125-poleDCNPNtimer**/ScrewterminalDCPNP/ConnectorS124-poleDCPNP/ScrewterminalDCPNPtimer**/S125-poleDCPNPtimer**/ScrewterminalWiring(page17)
LHS-6080-101*LHT-6080-101LHS-6080-151LHT-6080-151
LHS-6080-103*LHT-6080-103LHS-6080-153LHT-6080-153Diagram4*/5
Partref.:(bold:preferredtypes)UCrelay/ConnectorS125-pole
UCrelay/Screwterminal
UCrelay/timer**/S125-pole
UCrelay/timer**/ScrewterminalWiring(page17)
LHS-6080-115
LHT-6080-115
LHS-6080-165
LHT-6080-165
Diagram6
Housingsize Settingrange Standardtarget Emitter Weight
TyPE SPECIfIC DATA 65x83x25 50...1,000mm 200x200mmwhite IRLED880nm 100g
DC TyPE SPECIfIC DATA UC (AC / DC) 65x83x25 50...1,000mm 200x200mmwhite IRLED880nm 100g
Housingsize Settingrange Standardtarget Emitter Weight
**light-ON/dark-ONswitchable
SERIES 6080 50 ... 1,000 mm 50 ... 1,000 mm
1� Detailed data sheets for these products can be found on the CONTRINEX website:
backgroundtarget
MAIN fEATURES− Diffuse sensor with background suppression− Factory adjusted operating distance of 12 mm− Fully potted optical parts− Recognition of position and thickness differences of only 0.1 mm− Suitable for rough environments, thanks to glass-fiber reinforced PBTP housing− Scratch resistant, easy-to-clean glass lensesPart reference (bold: preferred types)
Housingsize: ��x�0 Backgroundsuppression/flexible/�0° Partreference LFP-1108-020 Operatingdistance Fixed 12mm Outsidefiber 2separatefibers,∅2.2mm Innerfiber 151x∅75mm Specialcharacteristics Lateralsensing Detectableheightdifference:0.1mm Minimumdetectabletargetsize:0.15mm2
Minimumdetectablewirediameter:0.1mm
Housingsize: ��x�0 Backgroundsuppression/flexible Partreference LFP-1109-020 Operatingdistance Fixed 12mm Outsidefiber 2separatefibers,∅2.2mm Innerfiber 151x∅75mm Specialcharacteristics Detectableheightdifference:0.1mm Minimumdetectabletargetsize:0.15mm2
Minimumdetectablewirediameter:0.1mm
SyNTHETIC fIBERS WITHBACKGROUND SUPPRESSION
www.contrinex.com 1�
NPNlight-ON/dark-ONoutput PNPlight-ON/dark-ONoutput
NPNchangeoveroutputsNPNlight-ON+receptionoutputs
Diagram4
Diagram3
PNPchangeoveroutputsPNPlight-ON+receptionoutputs
brown
black
white
blueload
Diagram5
NPNwithtestinput PNPwithtestinput
UCwithrelayoutput
Diagram6
brown
black
blue
white
gray
load
load
gray
brown
black
white
blue
*forconnectormodels
relay
(1)*
(3)*
(2)*
(5)*
(4)*
Diagram1 Diagram2
brown
black
blue
load
(2)N.C./(4)N.O.andS8
load
brown
black
white
blue
Analogoutput Analogoutput
(2)N.C./(4)N.O.andS8
brown
black
blue
load
brown
black
blue
load
brown
black
white
blue
load
WIRING DIAGRAMS
1� Detailed data sheets for these products can be found on the CONTRINEX website:
for further information, www.contrinex.com
www.contrinex.com 1�
for further information, www.contrinex.com
�0 Detailed data sheets for these products can be found on the CONTRINEX website:
Terms of delivery and right to change design reserved.
ContrinexAG Industrial Electronics route André Piller 50 - PO Box - CH 1762 Givisiez - Switzerland Tel: +41 26 460 46 46 - Fax: +41 26 460 46 40 Internet: www.contrinex.com - E-mail: [email protected]
©CONTRINEXAG�00�
EUROPEAustriaBelgiumCroatiaCzech RepublicDenmarkFinlandFranceGermanyGreat BritainGreeceHungaryIrelandItalyLuxembourgNetherlandsNorwayPolandPortugalRomaniaRussian FederationSlovakiaSlovenia
SpainSwedenSwitzerlandTurkey
AfRICASouth Africa
THE AMERICASArgentinaBrazilCanadaChileColombiaMexicoUnited StatesVenezuela
ASIAChinaIndiaIndonesia
JapanKoreaMalaysiaPakistanPhilippinesSingaporeTaiwanThailandVietnam
AUSTRALASIAAustraliaNew Zealand
MIDDLE EASTIranIsraelSyriaUnited Arab Emirates
ALL OvER THE WORLD
900
018
040
- 07
.08
- 3,
000
ContrinexInc. 2 Business Park Road - Old Saybrook, CT 06475 - USA Tel: 860 388 3573 - Tollfree: 866 289 2899 - Fax: 860 388 3574 Internet: www.contrinex.com - E-mail: [email protected]