net price listvalid until 30 sept 2017

Pfanzelt S-line and Profi geared cable winches and forwarding trailers

2

S-line and Profi geard cable winches

S-line geared cable winch S150Traction in lower cable layer (t) 50Traction in upper cable layer (t) 40Standard cable length (high density forestry cable with sliding hook, Ø in mm x m) 10 x 70Logging plate width (standard, mm) 1.500Profi forestry wireless remote control ●Pfanzelt PPS precision controller with PPS controller ●3 years parts warranty on the gearbox1 ●Weight (kg) approx. 510Net purchase price2 (without VAT) 5.990 € Accessories: Cable distributor with cable infeed brake 1.560 €Long cable package 1.790 € (incl. cable distributor with cable infeed brake) Ø 10 mm x 110 mCable payout3 1.290 €Offset gearbox with centered drive with direction of rotation reversal 670 €Transport and packaging 2on request

Geard cable winch P170, S172,

S-line geared cable winchesBoth the tree farmer and semiprofes-sional contractor need a professional geared cable winch. The S-line model fulfils this requirement at the price level of a chain cable winch.

Professional geared cable winchesThe new Pfanzelt Profi geared cable winches offers three campaign models with more power and a bigger cable capacity. Mature tree harvesting on flat ground or thinning on steep slopes – the demands on a professional geared cable winch vary according to the area of appli-cation and the available equipment.

3

net price list

S-line geared cable winch S160 S172Traction in lower cable layer (t) 60 72Traction in upper cable layer (t) 47 56Standard cable length (high density forestry cable with sliding hook, Ø in mm x m) 11 x 70 12 x 60Logging plate width (standard, mm) 1.500 1.800Profi forestry wireless remote control ● ●Pfanzelt PPS precision control with PPS controller ● ●3 years warranly for the garbox1 ● ●Weight (kg) (approx.) 540 (approx.)630Net purchase price2 (without VAT) 7.590 € 8.750 €

Accessories: Cable distribution and cable infeed brake 1.560 € 1.560 €Long cable version 1.790 € (incl. cable distribution and cable infeed brake) (Ø 11 mm x 100 m) 1.820 € (Ø 12 mm x 90 m)Cable payout³ 1.290 € 1.290 €Logging plate 1,800 mm 420 € ●Logging plate 2,000 mm 460 € 460 €Logging plate 2,200 mm 670 € 670 €Gearbox for centered drive, front mounting, two studs 670 € 670 €Transport and packaging 200 € 200 €

Profi geared cable winch P170 Promotion P185 Promotion P260 Promotion

Traction in lower cable layer (t) 70 85 60Traction in upper cable layer (t) 56 67 42Cable distribution and cable infeed brake ● ● ○Hydromechanical cable payout ● ● -Offset gearbox with centered drive ● ● ●Standard cable length (high density forestry cable with sliding hook, Ø in mm x m) 12 x 80 13 x 70 2 x 11 x 70Logging plate width (standard, mm) 1.800 2.000 1.800B&B type F10 forestry wireless remote control ● ● ●3 years parts warranty on the gearbox1 ● ● ●Weight (kg) approx. 685 approx. 740 approx. 815Net purchase price2 (without VAT) 14.900 € 16.700 € 16.200 €

Accessories: Cable distribution and cable infeed brake ● ● 3.250 €Long cable version 260 € (Ø 12 mm x 120 m) 260 € (Ø 13 mm x 110 m) - Logging plate 2,000 mm 460 € ● 460 €Logging plate 2,200 mm 670 € 670 € 670 €Logging plate 2,400 mm 980 € 980 € -Hydraulic foldable plate, 2,000 mm 2.890 € 2.890 € 2.890 €4-point linkage incl. hydraulic foldable plate 4.820 € 4.820 € 4.820 €Offset gearbox for centered drive with direction of rotation reversal for front mounting with two studs 670 € 670 € 920 €Transport and packaging 200 € 200 € 310 €

1 3 years parts warranty only for the gearbox2 The prices are net of VAT at the statutory rate and freight costs3 only in combination with cable distribution and cable infeed brake, without VAT• Serie ○ Option - Not deliverable

4

S-line forwarding trailer S6

S-line forwarding trailers S6Construction Ladder framePermitted total weight on public roads (t) up to 6,0Load capacity on non-public roads (t) 6,0Front grille area/ Flat bed length (m2, mm) 1,4 / 3.500Brake system 2-wheel hydrl. brake systemTyres 11.5/80-15.3 grooved tread, valve protectionHydraulic pivoting draw bar with 2 cylinders ●Operating station on draw bar ●Holder for chain saw and fuel canister ●Lashing straps (4 pieces) ●Loading crane LK 2764Reach (mm) 6.340Lift moment net/ Pivoting moment (kNm) 27 / 8,2Crane control (electro-hydraulic) 2 2 control toggles with 2 electrical functions for gripper and telescopeDead weight with crane (t) approx. 1,7Net purchase price2 (without VAT) 15.990 € Accessories:2-wheel overrun brake 1.950 €Tyres 380/55-17“ 14 PR, stud profile 1.200 €Independent oil supply with fixed piston pump (63 ltr.) 1.970 €Cut material floor pan (installation height up to stanchion top edge) 1.850 €

Forwarding trailer S6

S-line forwarding trailersThe Pfanzelt S-line forwarding trailer is especially designed for use by private forest owners. With its low profile design the S-line forwarding trailer is a universal machine with the same underlying engi-neering as the professional forwarding trailer.

S-line Rückeanhänger (S9, S11)Außen kompakt und trotzdem ein kleines Kraftpaket für den Einsatz bei Privatwaldbesitzern und Semiprofi-Betrieben. Die S-line Rückeanhänger präsentieren sich wendig und produktiv.

Profi forwarding trailerWith its Profi forwarding trailer series, Pfanzelt offers the most extensive for-warding trailer range on the market. With its special modular design, the user can put together the forwarding trailer accor-ding to his own requirements and choose between various weight classes, brake systems, loading cranes and an exten-sive range of accessories.

3-point linkage cranesThe Pfanzelt crane range is one of themost extensive on the market. The modern and powerful professional cranes are available in various lifting classes from 4to 9 m/t and reaches up to 10 m. In additionto the technical specifi- 2 The prices are net of VAT at the statutory rate and freight costs

• Serie ○ Option

5

S-line forwarding trailer S9, S11

S-line forwarding trailers S9 S11Construction Double frame made of special steel, U-profilePermitted total weight on public roads (t) up to 9,2 11,0Load capacity on non-public roads (t) 9,2 11,0Front grille area/ Flat bed length (m2, mm) 1,92/ 4.000 2,25 / 4.450Brake system 2-wheel 4-wheel pneumatic brake system pneumatic brake systemTyres 380/55-17” 14 PR, grooved tread 480/45-17“ grooved treadHydraulic pivoting draw bar with 2 cylinders ● ●Bogie axle swing travel ● ●Holder for chain saw and fuel canister ● ●Lashing straps (4 pieces) ● ●Loading crane LK 4267 LK 4272 (high crane pillar)Reach (mm) 6.340 mm 7.140 mmLift moment net/ Pivoting moment (kNm) 40,5/ 15,2 40,5/ 15,2Crane control (elektrohydraulisch) 2 control toggles with 2 electrical functions for gripper and telescopeDead weight with crane (t) approx. 2,9 approx. 3,5Net purchase price2 (without VAT) 21.200 € 28.700 € Accessories: Independent oil supply with fixed piston pump (108 ltr., 200 bar) 2.710 € 2.710 €Tyres Tyres 480/45-17“ 14 PR, stud profile 980 € ●Tyres 520/50-17“ 14 PR, stud profile 1.940 € 960 €Brake system Hydraulic 4-wheel braking system 860 € -4-wheel overrun brake with reverse automatic (max. total wt. 8 t) incl. additional manual brake for safe braking when reversing 2.880 € -4-wheel pneumatic brake system 2.670 € ●Loading cranes Loading crane LK 4272 with 7,140 mm reach 1.890 € ●4-finger gripper (gripper cross section 0,23 m2) 790 € 790 €Gripper add-on for round bales (for gripper Pm 230) 810 € 810 €EHC control Danfoss 8-way Autec remote control panel 8.370 € 8.370 €Crane cable winch, hydraulically driven, tractive force 1,5 t 2.910 € 2.910 €Pendulum with internal concealed hoses 660 € 660 €Forwarding trailer add-ons Long frame version (loading length 4,450 mm) 530 € ●Cut material floor pan (installation height up to stanchion top edge) 3,9 m 2.220 € 2.440 €Floor pan (installation height up to second stanchion radius) 3,9 m 2.220 € 2.440 €

Forwarding trailer S9

2 The prices are net of VAT at the statutory rate and freight costs•Serie ○ Option - Not deliverable

net price list

6

Profi forwarding trailers

Profi forwarding trailers P13 Promotion P15 PromotionConstruction Central spar (200 x 200 x 10 mm)Permitted total weight on public roads / non-public roads (t) 13,0 / 11,0 15,0 / 13,0Front grille area/ Flat bed length (m2, mm) 2,38/ 4.000 2,87/ 4.000 (extensible up to 6.000) (extensible up to 6.000)Braking system 4-wheel pneumatic braking systemTyres 480/45-17“ 14 PR 500/45-22,5“ 12 PRHydraulic pivoting draw bar with 2 cylinders ● ●Operating station on draw bar ● ●Holder for chain saw and fuel canister ● ●Lashing straps (4 pieces) ● ●Loading Crane LK 4272 LK 5180Reach (mm) 7.140 8.000Lift moment net/ Pivoting moment (kNm) 40,5/ 15,2 51/ 21,5Crane control (electro-hydraulic) 2 control toggles with 2 electrical functions for gripper and telescopeDead weight with crane (t) approx. 3,6 approx. 4,2Net purchase price2 (without VAT) 30.900 € 40.900 € Accessories: Independent oil supply with fixed piston pump (108 ltr., 200 bar) 3.440 € 3.440 €Tyres Tyres 520/50-17“, groove profile 960 € -Trys 500/45-22,5“ 159B, forestry wheel 2.830 € ●Tyres 520/50-17“ 159B, forestry wheel 1.520 € -Tyres 560/45-22.5“ 12 PR, stud profile, forestry wheel 3.280 € 610 €Tyres 600/50-22.5“ 12 PR, stud profile, forestry wheel - 2.060 €Loading cranes Loading crane LK 4280 with 7.850 mm reach 1.890 € -Loading crane LK 5280 with 7.800 mm reach 5.450 € -Loading crane LK 6180 with 7.870 mm reach - 1.500 €Loading crane 5186/ 5286 with 8.600 mm reach (double telescope) 7.050 € 1.600 €Loading crane 6186/ 6286 with 8.600 mm reach (double telescope) - 3.200 €Loading crane 51100 with 10.000 mm reach - 3.200 €4-finger gripper (gripper cross section 0,23 m2) 790 € 790 €EHC control Danfoss 8-way Autec remote control panel 8.370 € 8.370 €Crane cable winch, hydraulically driven, tractive force 1,5 t 2.910 € 2.910 €Pendulum with internal concealed hoses 660 € 660 €Forwarding trailer add-ons Draw bar hitch bottom for forwarding trailer 350 € 350 €Ball head suspension K80 for forwarding trailer 390 € 390 €Cut material floor pan (installation height up to stanchion top edge) 3,9 m 2.440 € 2.440 €Floor pan (installation height up to second stanchion radius) 3,9 m 2.440 € 2.440 €

Wheel drive hydraulic on request on request

Forwarding trailer P15

7

3-point linkage craneLoading crane

3-point linkage crane 4267 4272 5280Reach (mm) 6.370 7.140 7.800Lifting moment net 40,5 40,5 50Pivoting moment (kNm) 15,2 15,2 21,5Slewing range 370° 370° 370°Rotator, infinite (t) 4,5 4,5 4,5 Gripper opening width (mm) 1.260 1.260 1.260Crane control 2 control toggles with 2 electrical functionsWeight (kg) approx. 910 approx. 990 approx. 1.1053-point linkage crane ● ● ●Net purchase price2 (without VAT) 13.870 € 14.990 € on request Accessories:4-finger gripper (Gripper cross section 0,23 m2) 790 € 790 € 790 € EHC control Danfoss 8-way Autec remote control panel 8.370€ 8.370 € 8.370 €Crane cable winch, hydraulically driven, tractive force 1,5 t 2.910 € 2.910 € 2.910 €Pendulum with internal concealed hoses 660 € 660 € 660 €Quick-action implement coupling on rotator for griper 390 € 390 € 390 €Gripper add-on for round bales 810 € 810 € 810 €Snap-on clam shells for gripper (width 600 mm) 710 € 710 € 710 €Snap-on clam shells for gripper (width 800 mm) 760 € 760 € 760 €

2 The prices are net of VAT at the statutory rate and freigth costs• Serie ○Option - Not deliverable

net price list

8

Hydrl. recovery winch FW 0105Traction in lower/ upper cable layer 50 / 34 kNWorm gear in oil bath ●High density special forestry cable Ø 12 mm x 50 mCoupling for rapid cable pay out Claw couplingAvg. cable speed at 80 l 10,1 m/minPlate width 1.010 mmWeight approx. 220 kgEt purchase price2 (without VAT) 3.990 € Hydrl. recovery winch in front baffle plate FW 0105Plate width 1.010 mmWeight approx. 1.000 kgNet purchase price2 (without VAT) 7.710 €

Frontwinch FW0105

Both in agriculture/forestry and in environmental management, a cable winch is often required to recover vehicles or items of equipment. The MYSELF front-mounted recovery winch has been especially designed for this appli-cation. The simply mounted, hydraulically actuated cable winch for the quick-coupling 3-point link. This means the attachment can be mounted and removed in a matter of minutes for recovery jobs.

PM1702PLNETTO-04

2 The prices are net of VAT at the statutory rate and freight costs; valid until 30 september 2017

Pfanzelt Maschinenbau GmbHD-87675 Rettenbach • Frankau 37 0 88 60 / 92 17 - 0 info@pfanzelt-maschinenbau.de

Hydrl. recovery winch Myself

Technical specs RZ230Attachment block for front loaders (Euro attachment) ●Attachment block for 3-point linkage (Cat. II) ●Infinite rotator 4,5 tGripper opening width 1.250 mmGripper cross section 0,23 m2Weight approx. 350 kgNet purchase price2 (without VAT) 3.860 €

Logging grab RZ230

The hydraulic logging grab is supplied with attachment block for front loaders and 3-point hitch. The maximises flexibility when forwarding or loading logs. Forwarding and loading work can be performed significantly faster with the logging grab. Furthermore, no effort is required by the operator and he does not have to get out of the cab. The curved tooth rail between the lower arms can securely raise and carry fixed lengths. The gripper is open/closed and the rotator turned by an electrical switch.

Logging grab

pfanzelt-maschinenbau.de facebook.com/pfanzelt.maschinenbau

youtube.com/pfanzeltTVich-bin-forstunternehmer.de

B

Hergestellt inDeutschland

Geprüfte Qualität: